- the network work for libopie2 pays off...

- good bye to wellenreiterd, t'was fun but always too unstable and too hard to maintain
- good bye to libwellenreiter

55 files changed, 132 insertions, 3853 deletions

diff --git a/noncore/net/wellenreiter/Makefile.static b/noncore/net/wellenreiter/Makefile.static
deleted file mode 100644
index d5cdf44..0000000
--- a/noncore/net/wellenreiter/Makefile.static
+++ b/dev/null
@@ -1,28 +0,0 @@
-# Warning: Handcrafted!
-
-#############################################################################
-# Makefile for building targets in sub directories.
-#     Project: wellenreiter
-#    Template: subdirs
-#############################################################################
-
-MAKEFILE=	Makefile
-TMAKE	=	tmake
-
-SUBDIRS	=	libwellenreiter/source daemon/source gui cornucopia
-
-all: $(SUBDIRS)
-
-$(SUBDIRS): FORCE
-	cd $@; $(MAKE)
-
-tmake:
-	tmake wellenreiter.pro
-
-tmake_all:
-	for i in $(SUBDIRS); do ( if [ -d $$i ]; then cd $$i ; pro=`basename $$i`.pro ; $(TMAKE) $$pro -o $(MAKEFILE); grep "TEMPLATE.*subdirs" $$pro 2>/dev/null >/dev/null && $(MAKE) -f $(MAKEFILE) tmake_all || true; fi; ) ; done
-
-clean release debug:
-	for i in $(SUBDIRS); do ( if [ -d $$i ]; then cd $$i ; $(MAKE) $@; fi; ) ; done
-
-FORCE:
diff --git a/noncore/net/wellenreiter/config.in b/noncore/net/wellenreiter/config.in
index 19f85e2..e835d1f 100644
--- a/noncore/net/wellenreiter/config.in
+++ b/noncore/net/wellenreiter/config.in
@@ -1,4 +1,6 @@
   config WELLENREITER
     boolean "wellenreiter (wireless LAN monitor)"
     default "y"
-    depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE
+    depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE && LIBOPIE2CORE && LIBOPIE2NET && LIBOPIE2UI
+    comment "wellenreiter needs libqpe, libopie1 and libopie2 (core+net+ui)"
+    depends !(( LIBQPE || LIBQPE-X11 ) && LIBOPIE && LIBOPIE2CORE && LIBOPIE2NET && LIBOPIE2UI)
diff --git a/noncore/net/wellenreiter/contrib/.cvsignore b/noncore/net/wellenreiter/contrib/.cvsignore
deleted file mode 100644
index 0e45b67..0000000
--- a/noncore/net/wellenreiter/contrib/.cvsignore
+++ b/dev/null
@@ -1,4 +0,0 @@
-*.o
-*~
-moc_*
-Makefile.*
diff --git a/noncore/net/wellenreiter/contrib/orinoco_hopper/.cvsignore b/noncore/net/wellenreiter/contrib/orinoco_hopper/.cvsignore
deleted file mode 100644
index 4299fd9..0000000
--- a/noncore/net/wellenreiter/contrib/orinoco_hopper/.cvsignore
+++ b/dev/null
@@ -1,4 +0,0 @@
-*.o
-*~
-moc_*
-Makefile*
diff --git a/noncore/net/wellenreiter/cornucopia/.cvsignore b/noncore/net/wellenreiter/cornucopia/.cvsignore
deleted file mode 100644
index 724d599..0000000
--- a/noncore/net/wellenreiter/cornucopia/.cvsignore
+++ b/dev/null
@@ -1,8 +0,0 @@
-*.o
-*~
-Makefile*
-moc_*
-wellenreitertemplate.cpp
-wellenreitertemplate.h
-configbase.h
-configbase.cpp
diff --git a/noncore/net/wellenreiter/cornucopia/README b/noncore/net/wellenreiter/cornucopia/README
deleted file mode 100644
index 486dc67..0000000
--- a/noncore/net/wellenreiter/cornucopia/README
+++ b/dev/null
@@ -1,124 +0,0 @@
-/********************************************************************
-/*     This is an overview of the opielibs 1.2 project
-/********************************************************************/
-
-  Origin: opielibs is about creating classes to
-          * optimize Qt classes for the embedded environment
-          * provide sophisticated abstractions for developers
-          * provide complete documentation and working examples
-          * provide end users with a common look and feel
-          * reduce memory footprint through sharing code
-          * reduce possible bugs through reusing tested code
-
---------------------------------------------------------
-1. General Overview
---------------------------------------------------------
-
-Separation into the following libraries:
- - libopiecore
- - libopieui
- - libopiepim
- - libopienet
-
-1.1 Contents of libopiecore [ opiecore ]
---------------------------------------------------------
-
- - oprocctrl
- - oprocess
- - odevice
- - odevicebutton
-
- - oconfig
- - oconfiggroupsaver
- - ocompletionbase
- - ocompletion
- - ocomptreenodelist
- - ocomptreenode
- - ocompletionwrapper
- - oglobal
- - oglobalsettings
- - osortableitem
- - osortablevaluelist
-
-1.2 Contents of libopieui [ opieui ]
---------------------------------------------------------
-
- - oapplication
-
- - ofiledialog
- - colordialog
- - oclickablelabel
- - ocolorbutton
- - colorpopupmenu
- - otabinfo
- - otabbar
- - otabwidget
- - ofontmenu
- - ofontselector
- - ofileview
- - oticker
-
- - olistview
- - olistviewitem
- - oversatileview
- - oversatileviewitem
- - ocompletionbox
- - olineedit
- - ocombobox
- - ohistorycombo
-
- - omessagebox
- - odialogbase
-
- - todayconfigwidget  (rather into opiepim?)
- - orecurrancewidget  (rather into opiepim?)
- - otimepicker        (rather into opiepim?)
-
-1.3 Contents of libopiepim [ opiepim ]
---------------------------------------------------------
-
- - ocheckitem
- - todoevent
- - todoresource
- - todayplugininterface
- - todovcalresource
-
-1.4 Contents of libopiedb [ opiedb ]
---------------------------------------------------------
-
- - tododb
- - xmltree
-
-1.5 Contents of libopienet [ opienet ]
---------------------------------------------------------
-
- <libmail stuff>
- <libbend stuff>
- <libftp stuff>
-
---------------------------------------------------------
-2.0 Feature Description
---------------------------------------------------------
-
-2.1 libopiecore
-
-...
-
-2.2 libopieui
-
-...
-
-2.2.x OListView, OListViewItem, OListViewFactory
-
-...
-
-2.3 libopiepim
-
-...
-
-2.4 libopiedb
-
-...
-
-2.5 libopienet
-
diff --git a/noncore/net/wellenreiter/cornucopia/cornucopia.pro b/noncore/net/wellenreiter/cornucopia/cornucopia.pro
deleted file mode 100644
index 7ffa202..0000000
--- a/noncore/net/wellenreiter/cornucopia/cornucopia.pro
+++ b/dev/null
@@ -1,16 +0,0 @@
-DESTDIR        = $(OPIEDIR)/lib
-MOC_DIR        = ./tmp
-OBJECTS_DIR    = ./tmp
-TEMPLATE       = lib
-CONFIG         = qt warn_on debug
-VERSION        = 0.1
-HEADERS        = olistview.h
-SOURCES        = olistview.cpp
-INCLUDEPATH    = $(OPIEDIR)/include
-DEPENDPATH     = $(OPIEDIR)/include
-TARGET         = cornucopia
-
-!contains( platform, x11 ) {
-  include ( $(OPIEDIR)/include.pro )
-}
-
diff --git a/noncore/net/wellenreiter/cornucopia/olistview.cpp b/noncore/net/wellenreiter/cornucopia/olistview.cpp
deleted file mode 100644
index c292eb9..0000000
--- a/noncore/net/wellenreiter/cornucopia/olistview.cpp
+++ b/dev/null
@@ -1,417 +0,0 @@
-/*
-                             This file is part of the Opie Project
-
-                             Copyright (C) 2003 Michael 'Mickey' Lauer
-                             <mickey@tm.informatik.uni-frankfurt.de>
-              =.
-            .=l.
-           .>+-=
- _;:,     .>    :=|.         This program is free software; you can
-.> <`_,   >  .   <=          redistribute it and/or  modify it under
-:`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
-.="- .-=="i,     .._         License as published by the Free Software
- - .   .-<_>     .<>         Foundation; either version 2 of the License,
-     ._= =}       :          or (at your option) any later version.
-    .%`+i>       _;_.
-    .i_,=:_.      -<s.       This program is distributed in the hope that
-     +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
-    : ..    .:,     . . .    without even the implied warranty of
-    =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
-  _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
-..}^=.=       =       ;      Library General Public License for more
-++=   -.     .`     .:       details.
- :     =  ...= . :.=-
- -.   .:....=;==+<;          You should have received a copy of the GNU
-  -_. . .   )=.  =           Library General Public License along with
-    --        :-=`           this library; see the file COPYING.LIB.
-                             If not, write to the Free Software Foundation,
-                             Inc., 59 Temple Place - Suite 330,
-                             Boston, MA 02111-1307, USA.
-
-*/
-
-#include <qcolor.h>
-#include <qheader.h>
-#include <qpainter.h>
-#include <qpixmap.h>
-
-#include "olistview.h"
-
-//****************************** OListView **************************************************************************
-
-OListView::OListView( QWidget *parent, const char *name )
-          :QListView( parent, name )
-{
-    //FIXME: get from global settings and calculate ==> see oglobalsettings.*
-
-    m_alternateBackground = QColor( 238, 246, 255 );
-    m_columnSeparator = QPen( QColor( 150, 160, 170 ), 0, DotLine );
-    m_fullWidth = true;
-}
-
-OListView::~OListView()
-{
-}
-
-void OListView::setFullWidth( bool fullWidth )
-{
-    m_fullWidth = m_fullWidth;
-    #if QT_VERSION > 290
-    header()->setStretchEnabled( fullWidth, columns()-1 );
-    #endif
-}
-
-bool OListView::fullWidth() const
-{
-    return m_fullWidth;
-}
-
-int OListView::addColumn( const QString& label, int width )
-{
-    int result = QListView::addColumn( label, width );
-    #if QT_VERSION > 290
-    if (m_fullWidth) {
-        header()->setStretchEnabled( false, columns()-2 );
-        header()->setStretchEnabled( true, columns()-1  );
-    }
-    #endif
-    return result;
-}
-
-int OListView::addColumn( const QIconSet& iconset, const QString& label, int width )
-{
-    int result = QListView::addColumn( iconset, label, width );
-    #if QT_VERSION > 290
-    if (m_fullWidth) {
-        header()->setStretchEnabled( false, columns()-2 );
-        header()->setStretchEnabled( true, columns()-1 );
-    }
-    #endif
-    return result;
-}
-
-void OListView::removeColumn( int index )
-{
-    QListView::removeColumn(index);
-    #if QT_VERSION > 290
-    if ( m_fullWidth && index == columns() )
-    {
-        header()->setStretchEnabled( true, columns()-1 );
-    }
-    #endif
-}
-
-const QColor& OListView::alternateBackground() const
-{
-    return m_alternateBackground;
-}
-
-void OListView::setAlternateBackground( const QColor &c )
-{
-    m_alternateBackground = c;
-    repaint();
-}
-
-const QPen& OListView::columnSeparator() const
-{
-    return m_columnSeparator;
-}
-
-void OListView::setColumnSeparator( const QPen& p )
-{
-    m_columnSeparator = p;
-    repaint();
-}
-
-OListViewItem* OListView::childFactory()
-{
-    return new OListViewItem( this );
-}
-
-#ifndef QT_NO_DATASTREAM
-void OListView::serializeTo( QDataStream& s ) const
-{
-    #warning Caution... the binary format is still under construction...
-    qDebug( "storing OListView..." );
-
-    // store number of columns and the labels
-    s << columns();
-    for ( int i = 0; i < columns(); ++i )
-        s << columnText( i );
-
-    // calculate the number of top-level items to serialize
-    int items = 0;
-    QListViewItem* item = firstChild();
-    while ( item )
-    {
-        item = item->nextSibling();
-        items++;
-    }
-
-    // store number of items and the items itself
-    s << items;
-    item = firstChild();
-    for ( int i = 0; i < items; ++i )
-    {
-        s << *static_cast<OListViewItem*>( item );
-        item = item->nextSibling();
-    }
-
-    qDebug( "OListview stored." );
-}
-
-void OListView::serializeFrom( QDataStream& s )
-{
-    #warning Caution... the binary format is still under construction...
-    qDebug( "loading OListView..." );
-
-    int cols;
-    s >> cols;
-    qDebug( "read number of columns = %d", cols );
-
-    while ( columns() < cols ) addColumn( QString::null );
-
-    for ( int i = 0; i < cols; ++i )
-    {
-        QString coltext;
-        s >> coltext;
-        qDebug( "read text '%s' for column %d", (const char*) coltext, i );
-        setColumnText( i, coltext );
-    }
-
-    int items;
-    s >> items;
-    qDebug( "read number of items = %d", items );
-
-    for ( int i = 0; i < items; ++i )
-    {
-        OListViewItem* item = childFactory();
-        s >> *item;
-    }
-
-    qDebug( "OListView loaded." );
-
-}
-
-QDataStream& operator<<( QDataStream& s, const OListView& lv )
-{
-    lv.serializeTo( s );
-}
-
-QDataStream& operator>>( QDataStream& s, OListView& lv )
-{
-    lv.serializeFrom( s );
-}
-#endif // QT_NO_DATASTREAM
-
-//****************************** OListViewItem ***********************************************************************
-
-OListViewItem::OListViewItem(QListView *parent)
-  : QListViewItem(parent)
-{
-    init();
-}
-
-OListViewItem::OListViewItem(QListViewItem *parent)
-  : QListViewItem(parent)
-{
-    init();
-}
-
-OListViewItem::OListViewItem(QListView *parent, QListViewItem *after)
-  : QListViewItem(parent, after)
-{
-    init();
-}
-
-OListViewItem::OListViewItem(QListViewItem *parent, QListViewItem *after)
-  : QListViewItem(parent, after)
-{
-    init();
-}
-
-OListViewItem::OListViewItem(QListView *parent,
-    QString label1, QString label2, QString label3, QString label4,
-    QString label5, QString label6, QString label7, QString label8)
-  : QListViewItem(parent, label1, label2, label3, label4, label5, label6, label7, label8)
-{
-    init();
-}
-
-OListViewItem::OListViewItem(QListViewItem *parent,
-    QString label1, QString label2, QString label3, QString label4,
-    QString label5, QString label6, QString label7, QString label8)
-  : QListViewItem(parent, label1, label2, label3, label4, label5, label6, label7, label8)
-{
-    init();
-}
-
-OListViewItem::OListViewItem(QListView *parent, QListViewItem *after,
-    QString label1, QString label2, QString label3, QString label4,
-    QString label5, QString label6, QString label7, QString label8)
-  : QListViewItem(parent, after, label1, label2, label3, label4, label5, label6, label7, label8)
-{
-    init();
-}
-
-OListViewItem::OListViewItem(QListViewItem *parent, QListViewItem *after,
-    QString label1, QString label2, QString label3, QString label4,
-    QString label5, QString label6, QString label7, QString label8)
-  : QListViewItem(parent, after, label1, label2, label3, label4, label5, label6, label7, label8)
-{
-    init();
-}
-
-OListViewItem::~OListViewItem()
-{
-}
-
-void OListViewItem::init()
-{
-    m_known = false;
-}
-
-const QColor &OListViewItem::backgroundColor()
-{
-    return isAlternate() ? static_cast<OListView*>(listView())->alternateBackground() :
-                           listView()->viewport()->colorGroup().base();
-}
-
-bool OListViewItem::isAlternate()
-{
-    OListView *lv = static_cast<OListView*>( listView() );
-
-    // check if the item above is an OListViewItem
-    OListViewItem *above = static_cast<OListViewItem*>( itemAbove() );
-    /*if (! itemAbove()->inherits( "OListViewItem" )) return false;*/
-
-    // check if we have a valid alternate background color
-    if (!(lv && lv->alternateBackground().isValid())) return false;
-
-    m_known = above ? above->m_known : true;
-    if (m_known)
-    {
-       m_odd = above ? !above->m_odd : false;
-    }
-    else
-    {
-        OListViewItem *item;
-        bool previous = true;
-        if (parent())
-        {
-            item = static_cast<OListViewItem *>(parent());
-            if ( item /*&& item->inherits( "OListViewItem" )*/ ) previous = item->m_odd;
-            item = static_cast<OListViewItem *>(parent()->firstChild());
-            /* if ( !item.inherits( "OListViewItem" ) item = 0; */
-        }
-        else
-        {
-            item = static_cast<OListViewItem *>(lv->firstChild());
-        }
-
-        while(item)
-        {
-            item->m_odd = previous = !previous;
-            item->m_known = true;
-            item = static_cast<OListViewItem *>(item->nextSibling());
-            /* if (!item.inherits( "OListViewItem" ) ) break; */
-        }
-    }
-    return m_odd;
-}
-
-void OListViewItem::paintCell(QPainter *p, const QColorGroup &cg, int column, int width, int alignment)
-{
-    QColorGroup _cg = cg;
-    const QPixmap *pm = listView()->viewport()->backgroundPixmap();
-    if (pm && !pm->isNull())
-    {
-        _cg.setBrush( QColorGroup::Base, QBrush(backgroundColor(), *pm) );
-        p->setBrushOrigin( -listView()->contentsX(), -listView()->contentsY() );
-    }
-    else if ( isAlternate() )
-    {
-        _cg.setColor( QColorGroup::Base, static_cast<OListView*>( listView() )->alternateBackground() );
-    }
-    QListViewItem::paintCell( p, _cg, column, width, alignment );
-
-    //FIXME: Use styling here!
-
-    const QPen& pen = static_cast<OListView*>( listView() )->columnSeparator();
-    p->setPen( pen );
-    p->drawLine( width-1, 0, width-1, height() );
-}
-
-OListViewItem* OListViewItem::childFactory()
-{
-    return new OListViewItem( this );
-}
-
-#ifndef QT_NO_DATASTREAM
-void OListViewItem::serializeTo( QDataStream& s ) const
-{
-    #warning Caution... the binary format is still under construction...
-    qDebug( "storing OListViewItem..." );
-
-    // store item text
-    for ( int i = 0; i < listView()->columns(); ++i )
-    {
-        s << text( i );
-    }
-
-    // calculate the number of children to serialize
-    int items = 0;
-    QListViewItem* item = firstChild();
-    while ( item )
-    {
-        item = item->nextSibling();
-        items++;
-    }
-
-    // store number of items and the items itself
-    s << items;
-    item = firstChild();
-    for ( int i = 0; i < items; ++i )
-    {
-        s << *static_cast<OListViewItem*>( item );
-        item = item->nextSibling();
-    }
-
-    qDebug( "OListviewItem stored." );
-}
-void OListViewItem::serializeFrom( QDataStream& s )
-{
-    #warning Caution... the binary format is still under construction...
-    qDebug( "loading OListViewItem..." );
-
-    for ( int i = 0; i < listView()->columns(); ++i )
-    {
-        QString coltext;
-        s >> coltext;
-        qDebug( "read text '%s' for column %d", (const char*) coltext, i );
-        setText( i, coltext );
-    }
-
-    int items;
-    s >> items;
-    qDebug( "read number of items = %d", items );
-
-    for ( int i = 0; i < items; ++i )
-    {
-        OListViewItem* item = childFactory();
-        s >> (*item);
-    }
-
-    qDebug( "OListViewItem loaded." );
-}
-
-QDataStream& operator<<( QDataStream& s, const OListViewItem& lvi )
-{
-    lvi.serializeTo( s );
-}
-
-QDataStream& operator>>( QDataStream& s, OListViewItem& lvi )
-{
-    lvi.serializeFrom( s );
-}
-#endif // QT_NO_DATASTREAM
diff --git a/noncore/net/wellenreiter/cornucopia/olistview.h b/noncore/net/wellenreiter/cornucopia/olistview.h
deleted file mode 100644
index 8911e22..0000000
--- a/noncore/net/wellenreiter/cornucopia/olistview.h
+++ b/dev/null
@@ -1,237 +0,0 @@
-/*
-                             This file is part of the Opie Project
-
-                             Copyright (C) 2003 Michael 'Mickey' Lauer
-                             <mickey@tm.informatik.uni-frankfurt.de>
-              =.
-            .=l.
-           .>+-=
- _;:,     .>    :=|.         This program is free software; you can
-.> <`_,   >  .   <=          redistribute it and/or  modify it under
-:`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
-.="- .-=="i,     .._         License as published by the Free Software
- - .   .-<_>     .<>         Foundation; either version 2 of the License,
-     ._= =}       :          or (at your option) any later version.
-    .%`+i>       _;_.
-    .i_,=:_.      -<s.       This program is distributed in the hope that
-     +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
-    : ..    .:,     . . .    without even the implied warranty of
-    =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
-  _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
-..}^=.=       =       ;      Library General Public License for more
-++=   -.     .`     .:       details.
- :     =  ...= . :.=-
- -.   .:....=;==+<;          You should have received a copy of the GNU
-  -_. . .   )=.  =           Library General Public License along with
-    --        :-=`           this library; see the file COPYING.LIB.
-                             If not, write to the Free Software Foundation,
-                             Inc., 59 Temple Place - Suite 330,
-                             Boston, MA 02111-1307, USA.
-
-*/
-
-#ifndef OLISTVIEW_H
-#define OLISTVIEW_H
-
-#include <qcolor.h>
-#include <qlistview.h>
-#include <qpen.h>
-#include <qdatastream.h>
-
-class OListViewItem;
-
-/**
- * A @ref QListView variant featuring visual and functional enhancements
- * like an alternate background for odd rows, an autostretch mode
- * for the width of the widget ( >= Qt 3 only ) and persistence capabilities.
- *
- * @author Michael 'Mickey' Lauer <mickey@tm.informatik.uni-frankfurt.de>
- * @short OListView list/tree widget.
- */
- class OListView: public QListView
-{
-  public:
-   /**
-    * Constructor.
-    *
-    * The parameters @p parent and @p name are handled by
-    * @ref QListView, as usual.
-    */
-    OListView ( QWidget *parent = 0, const char *name = 0 );
-
-   /**
-    * Destructor.
-    */
-    virtual ~OListView();
-
-   /**
-    * Let the last column fit exactly all the available width.
-    */
-    void setFullWidth( bool fullWidth );
-
-   /**
-    * Returns whether the last column is set to fit the available width.
-    */
-    bool fullWidth() const;
-
-   /**
-    * Reimplemented for full width support
-    */
-    virtual int addColumn( const QString& label, int width = -1 );
-
-   /**
-    * Reimplemented for full width support
-    */
-    virtual int addColumn( const QIconSet& iconset, const QString& label, int width = -1 );
-
-   /**
-    * Reimplemented for full width support
-    */
-    virtual void removeColumn(int index);
-
-   /**
-    * sets the alternate background background color.
-    * This only has an effect if the items are OListViewItems
-    *
-    * @param c the color to use for every other item. Set to an invalid
-    *        color to disable alternate colors.
-    */
-    void setAlternateBackground( const QColor &c );
-
-   /**
-    * sets the column separator pen.
-    *
-    * @param p the pen used to draw the column separator.
-    */
-    void setColumnSeparator( const QPen &p );
-
-   /**
-    * @return the alternate background color
-    */
-    const QColor& alternateBackground() const;
-
-   /**
-    * @return the column separator pen
-    */
-    const QPen& columnSeparator() const;
-
-   /**
-    * create a list view item as child of this object
-    * @return the new object
-    */
-    virtual OListViewItem* childFactory();
-
-    #ifndef QT_NO_DATASTREAM
-   /**
-    * serialize this object to a @ref QDataStream
-    * @param s the stream used to serialize this object.
-    */
-    virtual void serializeTo( QDataStream& s ) const;
-
-   /**
-    * serialize this object from a @ref QDataStream
-    * @param s the stream used to serialize this object.
-    */
-    virtual void serializeFrom( QDataStream& s );
-    #endif
-
-  private:
-    QColor m_alternateBackground;
-    bool m_fullWidth;
-    QPen m_columnSeparator;
-};
-
-#ifndef QT_NO_DATASTREAM
-/**
-  * \relates QListView
-  * Writes a listview to the stream and returns a reference to the stream.
-  */
-QDataStream& operator<<( QDataStream& s, const OListView& lv );
-/**
-  * \relates QListView
-  * Reads a listview from the stream and returns a reference to the stream.
-  */
-QDataStream& operator>>( QDataStream& s, OListView& lv );
-#endif // QT_NO_DATASTREAM
-
-//****************************** OListViewItem ******************************************************************
-
-class OListViewItem: public QListViewItem
-{
-  public:
-    OListViewItem( QListView * parent );
-    OListViewItem( QListViewItem * parent );
-    OListViewItem( QListView * parent, QListViewItem * after );
-    OListViewItem( QListViewItem * parent, QListViewItem * after );
-
-    OListViewItem( QListView * parent,
-        QString,     QString = QString::null,
-        QString = QString::null, QString = QString::null,
-        QString = QString::null, QString = QString::null,
-        QString = QString::null, QString = QString::null );
-
-    OListViewItem( QListViewItem * parent,
-        QString,     QString = QString::null,
-        QString = QString::null, QString = QString::null,
-        QString = QString::null, QString = QString::null,
-        QString = QString::null, QString = QString::null );
-
-    OListViewItem( QListView * parent, QListViewItem * after,
-        QString,     QString = QString::null,
-        QString = QString::null, QString = QString::null,
-        QString = QString::null, QString = QString::null,
-        QString = QString::null, QString = QString::null );
-
-    OListViewItem( QListViewItem * parent, QListViewItem * after,
-        QString,     QString = QString::null,
-        QString = QString::null, QString = QString::null,
-        QString = QString::null, QString = QString::null,
-        QString = QString::null, QString = QString::null );
-
-    virtual ~OListViewItem();
-
-    const QColor& backgroundColor();
-    bool isAlternate();
-    void paintCell( QPainter *p, const QColorGroup &cg, int column, int width, int alignment );
-    void init();
-
-   /**
-    * create a list view item as child of this object
-    * @return the new object
-    */
-    virtual OListViewItem* childFactory();
-
-    #ifndef QT_NO_DATASTREAM
-   /**
-    * serialize this object to or from a @ref QDataStream
-    * @param s the stream used to serialize this object.
-    */
-    virtual void serializeTo( QDataStream& s ) const;
-
-   /**
-    * serialize this object to or from a @ref QDataStream
-    * @param s the stream used to serialize this object.
-    */
-    virtual void serializeFrom( QDataStream& s );
-    #endif
-
-  private:
-    bool m_known;
-    bool m_odd;
-};
-
-#ifndef QT_NO_DATASTREAM
-/**
-  * \relates QListViewItem
-  * Writes a listview item and all subitems recursively to the stream
-  * and returns a reference to the stream.
-  */
-QDataStream& operator<<( QDataStream &s, const OListViewItem& lvi );
-/**
-  * \relates QListViewItem
-  * Reads a listview item from the stream and returns a reference to the stream.
-  */
-QDataStream& operator>>( QDataStream &s, OListViewItem& lvi );
-#endif // QT_NO_DATASTREAM
-
-#endif // OLISTVIEW_H
diff --git a/noncore/net/wellenreiter/daemon/.cvsignore b/noncore/net/wellenreiter/daemon/.cvsignore
deleted file mode 100644
index 4299fd9..0000000
--- a/noncore/net/wellenreiter/daemon/.cvsignore
+++ b/dev/null
@@ -1,4 +0,0 @@
-*.o
-*~
-moc_*
-Makefile*
diff --git a/noncore/net/wellenreiter/daemon/daemon.pro b/noncore/net/wellenreiter/daemon/daemon.pro
deleted file mode 100644
index 33a6bb9..0000000
--- a/noncore/net/wellenreiter/daemon/daemon.pro
+++ b/dev/null
@@ -1,16 +0,0 @@
-DESTDIR         = $(OPIEDIR)/bin
-TEMPLATE        = app
-CONFIG          = warn_on debug
-#CONFIG         = warn_on release
-HEADERS         = source/config.hh source/daemon.hh
-SOURCES         = source/daemon.cc
-INCLUDEPATH     += ../
-DEPENDPATH      += $(OPIEDIR)/include
-LIBS            += -lpcap -lpthread -L$(OPIEDIR)/lib -lwellenreiter
-INTERFACES      = 
-TARGET          = wellenreiterd
-DEFINES         += DEBUG
-
-!contains( platform, x11 ) {
-  include ( $(OPIEDIR)/include.pro )
-}
diff --git a/noncore/net/wellenreiter/daemon/source/.cvsignore b/noncore/net/wellenreiter/daemon/source/.cvsignore
deleted file mode 100644
index ed65c71..0000000
--- a/noncore/net/wellenreiter/daemon/source/.cvsignore
+++ b/dev/null
@@ -1,3 +0,0 @@
-*.o
-*~
-moc_*
diff --git a/noncore/net/wellenreiter/daemon/source/Makefile b/noncore/net/wellenreiter/daemon/source/Makefile
deleted file mode 100644
index 38d61f1..0000000
--- a/noncore/net/wellenreiter/daemon/source/Makefile
+++ b/dev/null
@@ -1,25 +0,0 @@
-# $Id$
-
-CPP		= g++
-CPPFLAGS	= -g -Wall  -pedantic -DDEBUG -I ../../
-LIBS		= -lpthread -lpcap ../../libwellenreiter/source/libwellenreiter.a
-OBJ		= daemon.o
-
-.SUFFIXES:
-.PHONY:		all wellenreiterd clean distclean realclean
-
-%.o : %.cc
-	$(CPP) $(CPPFLAGS) -c $< -o $@
-
-all:	wellenreiterd
-
-wellenreiterd:	$(OBJ)
-	$(CPP) $(CPPFLAGS) $(OBJ) $(LIBS) -o $@
-	@echo Build wellenreiterd
-
-clean distclean realclean:
-	@rm -f wellenreiterd *~ *.o
-	@echo All dependent files have been removed.
-
-daemon.o:	config.hh
-
diff --git a/noncore/net/wellenreiter/daemon/source/config.hh b/noncore/net/wellenreiter/daemon/source/config.hh
deleted file mode 100644
index 0ac7eb9..0000000
--- a/noncore/net/wellenreiter/daemon/source/config.hh
+++ b/dev/null
@@ -1,29 +0,0 @@
-/*
- *
- * Global configuration for wellenreiter
- *
- * $Id$
- *
- * Written by Martin J. Muench <mjm@codito.de>
- *
- */
-
-#ifndef CONFIG_HH
-#define CONFIG_HH
-
-#define PROGNAME "wellenreiter"  /* Name of program (for syslog et.al.) */
-#define VERSION  "0.2"           /* Version of wellenreiter             */
-
-#define DAEMONADDR    "127.0.0.1"
-#define DAEMONPORT    37772            /* Port of Daemon                           */
-
-#define GUIADDR  "127.0.0.1"     /* Adress of GUI, later specified in configfile */
-#define GUIPORT  37773          /* Port of GUI, "   " */
-
-/* Temporary cardmode stuff, will hopefully removed soon */
-#define   CARD_TYPE_CISCO       1
-#define   CARD_TYPE_NG          2
-#define   CARD_TYPE_HOSTAP      3
-#define   CARD_TYPE_ORINOCCO    4
-
-#endif /* CONFIG_HH */
diff --git a/noncore/net/wellenreiter/daemon/source/daemon.cc b/noncore/net/wellenreiter/daemon/source/daemon.cc
deleted file mode 100644
index b840f17..0000000
--- a/noncore/net/wellenreiter/daemon/source/daemon.cc
+++ b/dev/null
@@ -1,195 +0,0 @@
-/*
- * Startup functions of wellenreiter
- *
- * $Id$
- */
-
-#include "config.hh"
-#include "daemon.hh"
-
-/* should be parsed from cfg-file */
-#define MAXCHANNEL 13
-#define CHANINTERVAL 500000
-
-
-/* Main function of wellenreiterd */
-int main(int argc, char **argv)
-{
-  int sock, maxfd, retval;
-  char buffer[WL_SOCKBUF];
-  struct pcap_pkthdr header;
-  struct sockaddr_in saddr;
-//  pcap_t *handletopcap;
-  wl_cardtype_t cardtype;
-  pthread_t sub;
-  const unsigned char *packet;
-
-  fd_set rset;
-
-  fprintf(stderr, "wellenreiterd %s\n\n", VERSION);
-  fprintf(stderr, "(c) 2002 by M-M-M\n\n");
-
-  if(argc < 3)
-    usage();
-  
-  /* Set sniffer device */
-  memset(cardtype.iface, 0, sizeof(cardtype.iface));
-  strncpy(cardtype.iface, (char *)argv[1], sizeof(cardtype.iface) - 1);
-
-  /* Set card type */
-  cardtype.type = atoi(argv[2]);
-  if(cardtype.type < 1 || cardtype.type > 4)
-    usage();
-
-  /* Until we do not act as a read daemon, it starts the sniffer 
-     right after startup */
-  if (!start_sniffer(cardtype.iface,cardtype.type))
-  {
-  	wl_logerr("daemon, start_sniff did not return proper, aborting");
-  	exit(EXIT_FAILURE);
-  }
-  wl_loginfo ("daemon, wireless card prepared for sniffing");
-  
-  /* Setup socket for incoming commands */
-  if((sock=wl_setupsock(DAEMONADDR, DAEMONPORT, saddr)) < 0)
-  {
-    wl_logerr("Cannot setup socket");
-    exit(EXIT_FAILURE);
-  } 
-  wl_loginfo("Set up socket '%d' for GUI communication", sock);
-
-  /* Create channelswitching thread */
-  if(pthread_create(&sub, NULL, channel_switcher, 
-		    (void *)&cardtype) != 0)
-  {
-    wl_logerr("Cannot create thread: %s", strerror(errno));
-    close(sock);
-    exit(EXIT_FAILURE);
-  } 
-  if(pthread_detach(sub))
-  {
-    wl_logerr("Error detaching thread");
-    close(sock);
-    pthread_exit((pthread_t *)sub);
-    exit(EXIT_FAILURE);
-  }
-  wl_loginfo("Created and detached channel switching thread");
-  
-  FD_ZERO(&rset);
-
-  /* Start main loop */
-  wl_loginfo("Starting main loop");
-  while(1)
-  {
-
-    FD_SET(sock, &rset);
-    FD_SET(pcap_fileno(handletopcap), &rset);
-
-    /* maxfd = biggest filefd */
-    maxfd = (sock > pcap_fileno(handletopcap) ? 
-	     sock + 1 : pcap_fileno(handletopcap)) + 1;
-
-    if(select(maxfd, &rset, NULL, NULL, NULL) < 0)
-    {
-      wl_logerr("Error calling select: %s", strerror(errno));
-      break;
-    }     
-
-    /* Got data on local socket from GUI */
-    if(FD_ISSET(sock, &rset))
-    {
-      /* Receive data from socket */
-      if((retval=wl_recv(&sock, saddr, buffer, sizeof(buffer))) < 0)
-      {
-	wl_logerr("Error trying to read: %s", strerror(errno));
-	break;
-      }
-      else
-      {
-	/* check type of packet and start function according to it */
-	switch(retval)
-	{
-	case STARTSNIFF:
-	  wl_loginfo("Received STARTSNIFF command");
-	  if(!send_ok(GUIADDR, GUIPORT, STARTSNIFF))
-	    wl_logerr("Cannot set OK_CMD to GUI");
-	  break;
-	case STOPSNIFF:
-	  wl_loginfo("Received STOPSNIFF command");
-	  if(!send_ok(GUIADDR, GUIPORT, STOPSNIFF))
-	    wl_logerr("Cannot set FAIL_CMD to GUI");
-	  break;
-	default:
-	    wl_logerr("Received unknown command: %d", retval);
-	    break;
-	}
-      }
-    } /* FD_ISSET */
-
-    /* Check pcap lib for packets */
-    if(FD_ISSET(pcap_fileno(handletopcap), &rset))
-    {
-
-      /* Grab one single packet */
-      packet = pcap_next(handletopcap, &header);
-
-      /* process the packet */
-      process_packets(&header,*&packet, GUIADDR, GUIPORT);
-    }
-
-  } /* while(1) */
-  
-  close(sock);
-  exit(EXIT_SUCCESS);
-}
-
-void 
-usage(void)
-{
-  fprintf(stderr, "Usage: wellenreiter <device> <cardtype>\n"      \
-	  "\t<device>   = Wirelessdevice (e.g. wlan0)\n" \
-	  "\t<cardtype> = Cardtype:\tCisco\t= 1\n"       \
-	  "\t\t\t\tNG\t= 2\n"                             \
-          "\t\t\t\tHOSTAP\t= 3\n"			  \
-	  "\t\t\t\tLUCENT\t= 4\n");
-  exit(EXIT_FAILURE);
-}
-
-void * 
-channel_switcher(void *cardtypeptr)
-{
-  wl_cardtype_t *cardtype;
-  int maxchan=0;
-  int channel=1;
-  /* Get card info struct */
-  cardtype = (wl_cardtype_t *)cardtypeptr;
-  /* Get from the wireless extension the amount of available channels
-     this prevents a fail in switching on us cards */
-  maxchan = card_detect_channels(cardtype->iface);
-  
-  if (maxchan < MAXCHANNEL)
-  {
-  	#undef MAXCHANNEL
-  	#define MAXCHANNEL maxchan
-  }
-  
-  while(1)
-  {
-
-    /* If channel bigger than maxchannel, set to 1 */
-    if(channel > MAXCHANNEL)
-      channel=1;
-    
-    /* Set channel */
-    if(!card_set_channel(cardtype->iface, channel, cardtype->type))
-    {
-      wl_logerr("Cannot set channel, thread exiting");
-      pthread_exit(NULL);
-    }
-    
-    /* sleep */
-    usleep(CHANINTERVAL);
-    
-    channel++;
-  } /* while */
-}
diff --git a/noncore/net/wellenreiter/daemon/source/daemon.hh b/noncore/net/wellenreiter/daemon/source/daemon.hh
deleted file mode 100644
index f9ac45e..0000000
--- a/noncore/net/wellenreiter/daemon/source/daemon.hh
+++ b/dev/null
@@ -1,27 +0,0 @@
-/* $Id$ */
-
-#ifndef DAEMON_HH
-#define DAEMON_HH
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <pthread.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <libwellenreiter/source/wl_sock.hh>
-#include <libwellenreiter/source/wl_log.hh>
-#include <libwellenreiter/source/wl_types.hh>
-#include <libwellenreiter/source/wl_proto.hh>
-#include <libwellenreiter/source/cardmode.hh>
-#include <libwellenreiter/source/sniff.hh>
-
-void usage(void);
-void *channel_switcher(void *);
-
-#endif /* DAEMON_HH */ 
diff --git a/noncore/net/wellenreiter/docs/specification b/noncore/net/wellenreiter/docs/specification
deleted file mode 100644
index 0766ef4..0000000
--- a/noncore/net/wellenreiter/docs/specification
+++ b/dev/null
@@ -1,140 +0,0 @@
-
--[ Design of wellenreiter ]-
-
-written by: Martin J. Muench <mjm@codito.de>
-
--[ Introduction
-
-This is just a short overview of the new design of wellenreiter.
-There will for sure be some changes and most parts will be specified
-in more detail. 
-
-
--[ Program
-
-wellenreiter 1.7
-(will be named 2.0 after all the functions are implemented and the code
-is cleaned up and audited)
-
-
--[ Short description
-
-Wellenreiter is a wireless sniffing tool like netstumbler, kismet et al.
-It discovers Access Points and Ad-Hoc networks and displays all available
-information about them so that you can simply join unencrypted network 
-(without access restrictions) with the given informations.
-For the latest version of wellenreiter look at:
-http://wellenreiter.sourceforge.net.
-
-
--[ Overview
-
-The software is divided into 2 sections, the daemon and the GUI.
-The daemon does the active sniffing, analying stuff etc.pp. and
-sends the informations to the GUI which displays the results.
-
-
--[ Configuration
-
-The configuration is done by both, the GUI and the daemon so that the
-GUI only provides the graphical interface to the configuration library
-of the daemon. That means that the daemon loads the config file on 
-startup and sends the informations to the GUI. The GUI contains an option
-"configure" where the settings can be changed. They will be sent to the
-daemon which actually changes the configuration file.
-The configuration file is placed in /usr/local/etc/wellenreiter.conf.
-The whole content of this file cannot be specified yet.
-
-OPIE specific: Opie contains a bunch of high-level configuration classes,
-which are used by most Opie applications. It should be discussed whether
-to use this structure / API (preferred) or use a proprietary one.
-
-
--[ Interaction GUI<->daemon
-
-The GUI and the daemon will talk actively with eachother, meaning that 
-everyside who has informations for the other part will send it and not
-wait for the other part to poll.
-For example the sniffing function of the daemon is startet when a 
-"start_sniff" from the GUI arrived. And when the daemon found a network
-it will be directly send to the GUI to be able to sniff in realtime.
-
-
--[ Communication GUI<->daemon
-
-The GUI and the daemon run as threads within one process, where the GUI
-thread will be the main thread. Both the daemon and the GUI thread are
-(mostly) "free-running". Once the GUI thread is started and has finished
-its initializations, it jumps into the Qt event loop ( QApplication::exec() ).
-
-If the daemon thread is actively working and -
-for instance - has acquired interesting data for the GUI thread to display,
-it calls a special reentrant method of the GUI thread ( QApplication::postEvent )
-either transmitting the whole data structure or saying "Hey, there's interesting data
-for you", which the GUI thread then retrieves. 
-To enable a free running daemon thread to actually receive messages from the
-GUI thread, it's useful to to include a non-blocking check-for-messages-function
-within the daemon main loop <since it is waiting for messages from a GUI thread,
-this function has not be called very often>. If applicable, the daemon thread must
-not call this function but only monitor some guarded variables from time to time
-which the GUI thread can modify to alter the behaviour of the daemon thread.
-
-IMHO this is a much more leightweight design than to use a proprietary udp-socket protocol.
-
-
--[ Setting card modes
-
-One of the most interesting parts is the switching of the wirelesscards to
-different channels, to monitor mode and so on. In the older versions this
-actions were done by the calling of external programs, that is now obsolete.
-We will use the API of the wireless drivers to set it up. 
-
-
--[ Sniffing
-
-The sniffing will be done by capturing and analyzing all packets using the
-pcap library. The sniffer itself will be a function of the daemon which will
-probably be threaded so that this function is non-blocking.
-If a packet is found the sniffer sends it to an analyzer function which
-analyzes the packets, strips the results and sends it to the GUI.
-
-
--[ Logging
-
-The GUI should not need to log that much so it logs to STDERR. The daemon
-will be able to run in foreground and log to STDERR and syslog but normally
-it will only log to syslog (INFO/ERR).
-Logging of found networks, packets and so on will also be done by the daemon
-but set up by the GUI.
-
-
--[ GPS
-
-The gps daemon software will be used, hopefully by their API if they provide
-that. If not, we have to use system() calls, hope we do not.
-
-
--[ Security
-
-The programm and the daemon will have to run with SUID privileges for being
-able to change card modes etc. so the code has to be audited several times.
-Setuid 0 will only be called when really needing the privileges and dropped
-directly after every single systemcall.
-The daemon will implement an access control list where it specifies which
-IPs or network interfaces will have access to it. 
-The configuration file will be chmod'ed 0400, for writing the configuration
-library will change the mode. Of course the file will be locked during
-writing so no race conditions can occur.
-
-
--[ Documentation
-
-Wellenreiter will have it's own wellenreiter(8) manpage with most parts of 
-the README file in there.
-Also we will provide general documentation about wireless scanning, security
-risks with wireless devices and so on.
-Most documentation will be intern like this one. The GUI and the daemon
-should have a non-technical documentation and a developers version so we
-can easily develope with other peoples code without having to read it
-completely.
-
diff --git a/noncore/net/wellenreiter/gui/cardconfig.cpp b/noncore/net/wellenreiter/gui/cardconfig.cpp
deleted file mode 100644
index 1ca1d27..0000000
--- a/noncore/net/wellenreiter/gui/cardconfig.cpp
+++ b/dev/null
@@ -1,29 +0,0 @@
-/**********************************************************************
-** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
-**
-** This file is part of Opie Environment.
-**
-** This file may be distributed and/or modified under the terms of the
-** GNU General Public License version 2 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-**********************************************************************/
-
-#include "cardconfig.h"
-
-#include <qstring.h>
-
-CardConfig::CardConfig( const QString& interface, Type type, int hopinterval )
-           :_interface( interface ), _type( type ), _hopinterval( hopinterval )
-{
-
-}
-
-CardConfig::~CardConfig()
-{
-}
-
diff --git a/noncore/net/wellenreiter/gui/cardconfig.h b/noncore/net/wellenreiter/gui/cardconfig.h
deleted file mode 100644
index f54ebac..0000000
--- a/noncore/net/wellenreiter/gui/cardconfig.h
+++ b/dev/null
@@ -1,58 +0,0 @@
-/**********************************************************************
-** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
-**
-** This file is part of Opie Environment.
-**
-** This file may be distributed and/or modified under the terms of the
-** GNU General Public License version 2 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-**********************************************************************/
-
-#ifndef CARDCONFIG_H
-#define CARDCONFIG_H
-
-#include <qstring.h>
-
-#ifdef QWS
-#include <opie/odevice.h>
-using namespace Opie;
-#endif
-
-class CardConfig
-{
-  public:
-  
-    typedef enum { Prism, Orinoco, HostAP, Manual } Type;
-  
-  public:
-      
-    CardConfig( const QString& interface, Type type = Manual, int hopinterval = 100 );
-    virtual ~CardConfig();
-    
-    const QString& interface() { return _interface; };
-    int hopinterval() { return _hopinterval; };
-    Type type() { return _type; };
-    
-    #ifdef QWS
-    OSystem system() { return _system; };
-    #endif
-    
-  private:
-    
-    QString _interface;
-    Type _type;
-    int _hopinterval;
-    
-    #ifdef QWS
-    OSystem _system;
-    #endif
-    
-};
-
-#endif
-
diff --git a/noncore/net/wellenreiter/gui/configbase.ui b/noncore/net/wellenreiter/gui/configbase.ui
index 398118f..fa727f9 100644
--- a/noncore/net/wellenreiter/gui/configbase.ui
+++ b/noncore/net/wellenreiter/gui/configbase.ui
@@ -1,195 +1,153 @@
 <!DOCTYPE UI><UI>
 <class>WellenreiterConfigBase</class>
 <widget>
     <class>QDialog</class>
     <property stdset="1">
         <name>name</name>
         <cstring>WellenreiterConfigBase</cstring>
     </property>
     <property stdset="1">
         <name>geometry</name>
         <rect>
             <x>0</x>
             <y>0</y>
-            <width>220</width>
+            <width>212</width>
             <height>267</height>
         </rect>
     </property>
     <property stdset="1">
         <name>caption</name>
         <string>Form1</string>
     </property>
     <property>
         <name>layoutMargin</name>
     </property>
     <property>
         <name>layoutSpacing</name>
     </property>
     <vbox>
         <property stdset="1">
             <name>margin</name>
             <number>4</number>
         </property>
         <property stdset="1">
             <name>spacing</name>
             <number>1</number>
         </property>
         <widget>
             <class>QLayoutWidget</class>
             <property stdset="1">
                 <name>name</name>
                 <cstring>Layout5</cstring>
             </property>
             <property>
                 <name>layoutSpacing</name>
             </property>
             <hbox>
                 <property stdset="1">
                     <name>margin</name>
                     <number>0</number>
                 </property>
                 <property stdset="1">
                     <name>spacing</name>
                     <number>2</number>
                 </property>
                 <widget>
                     <class>QLabel</class>
                     <property stdset="1">
                         <name>name</name>
                         <cstring>TextLabel3_2</cstring>
                     </property>
                     <property stdset="1">
                         <name>sizePolicy</name>
                         <sizepolicy>
                             <hsizetype>4</hsizetype>
                             <vsizetype>1</vsizetype>
                         </sizepolicy>
                     </property>
                     <property stdset="1">
                         <name>text</name>
                         <string>Sniffer</string>
                     </property>
                 </widget>
                 <widget>
                     <class>Line</class>
                     <property stdset="1">
                         <name>name</name>
                         <cstring>Line9</cstring>
                     </property>
                     <property stdset="1">
                         <name>orientation</name>
                         <enum>Horizontal</enum>
                     </property>
                 </widget>
             </hbox>
         </widget>
         <widget>
             <class>QLayoutWidget</class>
             <property stdset="1">
                 <name>name</name>
                 <cstring>Layout7</cstring>
             </property>
             <property>
                 <name>layoutSpacing</name>
             </property>
             <grid>
                 <property stdset="1">
                     <name>margin</name>
                     <number>0</number>
                 </property>
                 <property stdset="1">
                     <name>spacing</name>
                     <number>2</number>
                 </property>
                 <widget row="0"  column="0" >
                     <class>QComboBox</class>
-                    <item>
-                        <property>
-                            <name>text</name>
-                            <string>&lt;select&gt;</string>
-                        </property>
-                    </item>
-                    <item>
-                        <property>
-                            <name>text</name>
-                            <string>eth0</string>
-                        </property>
-                    </item>
-                    <item>
-                        <property>
-                            <name>text</name>
-                            <string>eth1</string>
-                        </property>
-                    </item>
-                    <item>
-                        <property>
-                            <name>text</name>
-                            <string>wlan0</string>
-                        </property>
-                    </item>
-                    <item>
-                        <property>
-                            <name>text</name>
-                            <string>wlan1</string>
-                        </property>
-                    </item>
-                    <item>
-                        <property>
-                            <name>text</name>
-                            <string>wifi0</string>
-                        </property>
-                    </item>
-                    <item>
-                        <property>
-                            <name>text</name>
-                            <string>wifi1</string>
-                        </property>
-                    </item>
                     <property stdset="1">
                         <name>name</name>
                         <cstring>interfaceName</cstring>
                     </property>
                     <property stdset="1">
                         <name>enabled</name>
                         <bool>true</bool>
                     </property>
                     <property>
                         <name>whatsThis</name>
                         <string>Choose the interface used for sniffing.</string>
                     </property>
                 </widget>
                 <widget row="4"  column="0"  rowspan="1"  colspan="2" >
                     <class>QCheckBox</class>
                     <property stdset="1">
                         <name>name</name>
                         <cstring>activeScanning</cstring>
                     </property>
                     <property stdset="1">
                         <name>enabled</name>
                         <bool>false</bool>
                     </property>
                     <property stdset="1">
                         <name>text</name>
                         <string>Active Scanning (caution!)</string>
                     </property>
                 </widget>
                 <widget row="1"  column="0" >
                     <class>QComboBox</class>
                     <item>
                         <property>
                             <name>text</name>
                             <string>&lt;select&gt;</string>
                         </property>
                     </item>
                     <item>
                         <property>
                             <name>text</name>
                             <string>cisco</string>
                         </property>
                     </item>
                     <item>
                         <property>
                             <name>text</name>
                             <string>wlan-ng</string>
                         </property>
                     </item>
@@ -376,78 +334,82 @@
                 <name>layoutSpacing</name>
             </property>
             <vbox>
                 <property stdset="1">
                     <name>margin</name>
                     <number>0</number>
                 </property>
                 <property stdset="1">
                     <name>spacing</name>
                     <number>-1</number>
                 </property>
                 <widget>
                     <class>QCheckBox</class>
                     <property stdset="1">
                         <name>name</name>
                         <cstring>groupNetworks</cstring>
                     </property>
                     <property stdset="1">
                         <name>enabled</name>
                         <bool>false</bool>
                     </property>
                     <property stdset="1">
                         <name>text</name>
                         <string>Group Detected Networks</string>
                     </property>
                 </widget>
                 <widget>
                     <class>QCheckBox</class>
                     <property stdset="1">
                         <name>name</name>
                         <cstring>enableActivity</cstring>
                     </property>
                     <property stdset="1">
                         <name>enabled</name>
                         <bool>false</bool>
                     </property>
                     <property stdset="1">
                         <name>text</name>
                         <string>Enable Activity Display</string>
                     </property>
                 </widget>
                 <widget>
                     <class>QCheckBox</class>
                     <property stdset="1">
                         <name>name</name>
                         <cstring>beepOnFound</cstring>
                     </property>
                     <property stdset="1">
+                        <name>enabled</name>
+                        <bool>false</bool>
+                    </property>
+                    <property stdset="1">
                         <name>text</name>
                         <string>Beep on new network</string>
                     </property>
                 </widget>
             </vbox>
         </widget>
         <spacer>
             <property>
                 <name>name</name>
                 <cstring>Spacer2</cstring>
             </property>
             <property stdset="1">
                 <name>orientation</name>
                 <enum>Vertical</enum>
             </property>
             <property stdset="1">
                 <name>sizeType</name>
                 <enum>Expanding</enum>
             </property>
             <property>
                 <name>sizeHint</name>
                 <size>
                     <width>20</width>
                     <height>20</height>
                 </size>
             </property>
         </spacer>
     </vbox>
 </widget>
 </UI>
diff --git a/noncore/net/wellenreiter/gui/configwindow.cpp b/noncore/net/wellenreiter/gui/configwindow.cpp
index f86b109..6dd862f 100644
--- a/noncore/net/wellenreiter/gui/configwindow.cpp
+++ b/noncore/net/wellenreiter/gui/configwindow.cpp
@@ -1,56 +1,72 @@
 /**********************************************************************
 ** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
 **
 ** This file is part of Opie Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 **********************************************************************/
 
+/* LOCAL */
 #include "configwindow.h"
+
+/* QT */
 #include <qmap.h>
 #include <qcombobox.h>
 #include <qpushbutton.h>
 #include <qspinbox.h>
 #include <qlayout.h>
 
+/* OPIE */
+#include <opie2/onetwork.h>
+
 WellenreiterConfigWindow::WellenreiterConfigWindow( QWidget * parent, const char * name, WFlags f )
            :WellenreiterConfigBase( parent, name, true, f )
 {
     _devicetype[ "cisco" ] = 1;
     _devicetype[ "wlan-ng" ] = 2;
     _devicetype[ "hostap" ] = 3;
     _devicetype[ "orinoco" ] = 4;
     _devicetype[ "<manual>" ] = 5;
 
+    // gather possible interface names from ONetwork
+    ONetwork* net = ONetwork::instance();
+    ONetwork::InterfaceIterator it = net->iterator();
+    while ( it.current() )
+    {
+        if ( it.current()->isWireless() )
+            interfaceName->insertItem( it.current()->name() );
+        ++it;
+    }
+
     #ifdef Q_WS_X11 // We're on X11: adding an Ok-Button for the Dialog here
     QPushButton* okButton = new QPushButton( "ok", this );
     okButton->show();
     Layout5_2->addWidget( okButton ); //FIXME: rename this in configbase.ui
     connect( okButton, SIGNAL( clicked() ), this, SLOT( accept() ) );
     #endif
 };
 
 int WellenreiterConfigWindow::daemonDeviceType()
 {
     QString name = deviceType->currentText();
     if ( _devicetype.contains( name ) )
     {
         return _devicetype[name];
     }
     else
     {
         return 0;
     }
 };
 
 int WellenreiterConfigWindow::daemonHopInterval()
 {
     return hopInterval->cleanText().toInt();
 }
diff --git a/noncore/net/wellenreiter/gui/gui.pro b/noncore/net/wellenreiter/gui/gui.pro
index 8861a50..200bfc1 100644
--- a/noncore/net/wellenreiter/gui/gui.pro
+++ b/noncore/net/wellenreiter/gui/gui.pro
@@ -1,47 +1,43 @@
 MOC_DIR         = ./tmp
 OBJECTS_DIR     = ./tmp
 DESTDIR         = $(OPIEDIR)/bin
 TEMPLATE        = app
 CONFIG          = qt warn_on debug
 
 HEADERS         = wellenreiterbase.h \
                   mainwindow.h \
                   wellenreiter.h \
                   scanlist.h \
                   logwindow.h \
                   hexwindow.h \
                   configwindow.h \
-                  wlan.h \
-                  cardconfig.h \
                   manufacturers.h
 
 SOURCES         = main.cpp \
                   mainwindow.cpp \
                   wellenreiterbase.cpp \
                   wellenreiter.cpp \
                   scanlist.cpp \
                   logwindow.cpp \
                   hexwindow.cpp \
                   configwindow.cpp \
-                  wlan.cpp \
-                  cardconfig.cpp \
                   manufacturers.cpp
 
-INCLUDEPATH     += $(OPIEDIR)/include ../
-DEPENDPATH      += $(OPIEDIR)/include ../
-LIBS            += -L. -lwellenreiter -lcornucopia
+INCLUDEPATH     += $(OPIEDIR)/include
+DEPENDPATH      += $(OPIEDIR)/include
+LIBS            += -L. -lwellenreiter -lopiecore2 -lopieui2 -lopienet2
 INTERFACES      = configbase.ui
 TARGET          = wellenreiter
 
 !contains( platform, x11 ) {
   message( qws )
   include ( $(OPIEDIR)/include.pro )
   LIBS += -lqpe -lopie
 }
 
 contains( platform, x11 ) {
   LIBS += -L$(OPIEDIR)/lib -Wl,-rpath,$(OPIEDIR)/lib
   SOURCES += resource.cpp
   HEADERS += resource.h
 }
 
diff --git a/noncore/net/wellenreiter/gui/main.cpp b/noncore/net/wellenreiter/gui/main.cpp
index 270ce06..96a8c1c 100644
--- a/noncore/net/wellenreiter/gui/main.cpp
+++ b/noncore/net/wellenreiter/gui/main.cpp
@@ -1,43 +1,27 @@
 /**********************************************************************
 ** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
 **
 ** This file is part of Opie Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 **********************************************************************/
 
 #include "mainwindow.h"
-
-#ifdef QWS
-#include <qpe/qpeapplication.h>
-#else
-#include <qapplication.h>
-#endif
+#include <opie2/oapplication.h>
 
 int main( int argc, char **argv )
 {
-#ifdef QWS
-    QPEApplication a( argc, argv );
-#else
-    QApplication a( argc, argv );
-#endif
-
-    WellenreiterMainWindow w;
-
-    w.setCaption( "Wellenreiter/Opie" );
-#ifdef QWS
-    a.showMainWidget(&w);
-#else
-    a.setMainWidget(&w);
-    w.show();
-#endif
-
-    return a.exec();
+    OApplication a( argc, argv, "Wellenreiter II" );
+    WellenreiterMainWindow* w = new WellenreiterMainWindow();
+    a.showMainWidget( w );
+    a.exec();
+    delete w;
+    return 0;
 }
diff --git a/noncore/net/wellenreiter/gui/scanlist.h b/noncore/net/wellenreiter/gui/scanlist.h
index 222217c..da9369f 100644
--- a/noncore/net/wellenreiter/gui/scanlist.h
+++ b/noncore/net/wellenreiter/gui/scanlist.h
@@ -1,67 +1,67 @@
 /**********************************************************************
 ** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
 **
 ** This file is part of Opie Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 **********************************************************************/
 
 #ifndef SCANLIST_H
 #define SCANLIST_H
 
-#include <cornucopia/olistview.h>
+#include <opie2/olistview.h>
 
 #include <qtextstream.h>
 
 class QString;
 class ManufacturerDB;
 
 class MScanListView: public OListView
 {
   Q_OBJECT
 
   public:
     MScanListView( QWidget* parent = 0, const char* name = 0 );
     virtual ~MScanListView();
 
     void setManufacturerDB( ManufacturerDB* manufacturerdb );
 
     virtual OListViewItem* childFactory();
     virtual void serializeTo( QDataStream& s ) const;
     virtual void serializeFrom( QDataStream& s );
 
   public slots:
     void addNewItem( QString type, QString essid, QString macaddr, bool wep, int channel, int signal );
 
   private:
     ManufacturerDB* _manufacturerdb;
 
 };
 
 //****************************** MScanListItem ****************************************************************
 
 class MScanListItem: public OListViewItem
 {
   public:
     MScanListItem::MScanListItem( QListView* parent,
                                   QString type = "unknown",
                                   QString essid = "unknown",
                                   QString macaddr = "unknown",
                                   bool wep = false,
                                   int channel = 0,
                                   int signal = 0 );
 
     MScanListItem::MScanListItem( QListViewItem* parent,
                                   QString type = "unknown",
                                   QString essid = "unknown",
                                   QString macaddr = "unknown",
                                   bool wep = false,
                                   int channel = 0,
                                   int signal = 0 );
diff --git a/noncore/net/wellenreiter/gui/wellenreiter.cpp b/noncore/net/wellenreiter/gui/wellenreiter.cpp
index 09a44e6..5bdc1b3 100644
--- a/noncore/net/wellenreiter/gui/wellenreiter.cpp
+++ b/noncore/net/wellenreiter/gui/wellenreiter.cpp
@@ -1,282 +1,228 @@
 /**********************************************************************
 ** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
 **
 ** This file is part of Opie Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ***********************************************************************/
 
 // Qt
 
 #include <qpushbutton.h>
 #include <qmessagebox.h>
 #include <qcombobox.h>
 #include <qspinbox.h>
 #include <qsocketnotifier.h>
 
-// Qtopia
-
-#ifdef QWS
-#include <qpe/qpeapplication.h>
-#include <qpe/global.h>
-#endif
-
 // Opie
 
 #ifdef QWS
 #include <opie/odevice.h>
 using namespace Opie;
 #endif
 
+#include <opie2/oapplication.h>
+#include <opie2/onetwork.h>
+#include <opie2/opcap.h>
+
 // Standard
 
 #include <assert.h>
 #include <errno.h>
 #include <unistd.h>
 #include <string.h>
 #include <sys/types.h>
-#include <sys/socket.h>
 #include <stdlib.h>
-#include <fcntl.h>
 
 // Local
 
 #include "wellenreiter.h"
 #include "scanlist.h"
 #include "logwindow.h"
 #include "hexwindow.h"
 #include "configwindow.h"
 
 #include "manufacturers.h"
 
-#include <daemon/source/config.hh>
-#include <libwellenreiter/source/wl_types.hh>
-#include <libwellenreiter/source/wl_sock.hh>
-#include <libwellenreiter/source/wl_proto.hh>
-
 Wellenreiter::Wellenreiter( QWidget* parent )
     : WellenreiterBase( parent, 0, 0 ),
-      daemonRunning( false ), manufacturerdb( 0 ), configwindow( 0 )
+      sniffing( false ), iface( 0 ), manufacturerdb( 0 ), configwindow( 0 )
 {
 
     //
     // construct manufacturer database
     //
 
     QString manufile;
     #ifdef QWS
     manufile.sprintf( "%s/share/wellenreiter/manufacturers.dat", (const char*) QPEApplication::qpeDir() );
     #else
     manufile.sprintf( "/usr/local/share/wellenreiter/manufacturers.dat" );
     #endif
     manufacturerdb = new ManufacturerDB( manufile );
 
     logwindow->log( "(i) Wellenreiter has been started." );
 
     //
     // detect operating system
     //
 
     #ifdef QWS
     QString sys;
     sys.sprintf( "(i) Running on '%s'.", (const char*) ODevice::inst()->systemString() );
     _system = ODevice::inst()->system();
     logwindow->log( sys );
     #endif
 
-    //
-    // setup socket for daemon communication, register socket notifier
-    //
-
-    // struct sockaddr_in sockaddr;
-    daemon_fd = wl_setupsock( GUIADDR, GUIPORT, sockaddr );
-    if ( daemon_fd == -1 )
-    {
-        logwindow->log( "(E) Couldn't get file descriptor for commsocket." );
-    }
-    else
-    {
-        int flags;
-        flags = fcntl( daemon_fd, F_GETFL, 0 );
-        fcntl( daemon_fd, F_SETFL, flags | O_NONBLOCK );
-        QSocketNotifier *sn  = new QSocketNotifier( daemon_fd, QSocketNotifier::Read, this );
-        connect( sn, SIGNAL( activated( int ) ), this, SLOT( dataReceived() ) );
-    }
-
     // setup GUI
     netview->setColumnWidthMode( 1, QListView::Manual );
 
     if ( manufacturerdb )
         netview->setManufacturerDB( manufacturerdb );
 
+    pcap = new OPacketCapturer();
+
 }
 
 Wellenreiter::~Wellenreiter()
 {
     // no need to delete child widgets, Qt does it all for us
 
     delete manufacturerdb;
-
-    if ( daemon_fd != -1 )
-    {
-        qDebug( "closing comm socket" );
-        ::shutdown( daemon_fd, 0 );
-        ::close( daemon_fd );
-        qDebug( "comm socket closed." );
-    }
+    delete pcap;
 }
 
 void Wellenreiter::setConfigWindow( WellenreiterConfigWindow* cw )
 {
     configwindow = cw;
 }
 
-void Wellenreiter::handleMessage()
-{
-    // FIXME: receive message and handle it
-
-    qDebug( "received message from daemon." );
-
-    /*char buffer[10000];
-    memset( &buffer, 0, sizeof( buffer ) );*/
-    
-    char buffer[WL_SOCKBUF];
-
-    // int result = #wl_recv( &daemon_fd, (char*) &buffer, sizeof(buffer) );
-    
-    /*
-    
-    struct sockaddr from;
-    socklen_t len;
-    
-    int result = recvfrom( daemon_fd, &buffer, 8192, MSG_WAITALL, &from, &len );
-    qDebug( "received %d from recv [%d bytes]", result, len );
-    
-    */
-    
-    int result = wl_recv( &daemon_fd, sockaddr, (char*) &buffer, WL_SOCKBUF );
-
-    if ( result == -1 )
+void Wellenreiter::receivePacket(OPacket* p)
     {
-        qDebug( "Warning: %s", strerror( errno ) );
-        return;
-    }
-
-    int command = buffer[1] - 48;
-
-/*
-typedef struct {
-  int net_type;     1 = Accesspoint ; 2 = Ad-Hoc
-  int ssid_len;     Length of SSID
-  int channel;      Channel
-  int wep;          1 = WEP enabled ; 0 = disabled
-  char mac[64];     MAC address of Accesspoint
-  char bssid[128];  BSSID of Accesspoint
-} wl_network_t;
-*/
-
-    qDebug( "Recv result: %d", ( result ) );
-    qDebug( "Sniffer sent: '%s'", (const char*) buffer );
-    hexwindow->log( (const char*) &buffer );
-
-    if ( command == NETFOUND )  /* new network found */
-    {
-        qDebug( "Sniffer said: new network found." );
-        wl_network_t n;
-        get_network_found( &n, (char*) &buffer );
-        
-        qDebug( "Sniffer said: net_type is %d.", n.net_type );
-        qDebug( "Sniffer said: MAC is %s", (const char*) &n.mac );
-
-        //n.bssid[n.ssid_len] = "\0";
+    logwindow->log( "(d) Received data from daemon" );
+    //TODO
 
+    // check if we received a beacon frame
+    // static_cast is justified here
+    OWaveLanManagementPacket* beacon = static_cast<OWaveLanManagementPacket*>( p->child( "802.11 Management" ) );
+    if ( !beacon ) return;
         QString type;
         
-        if ( n.net_type == 1 )
-            type = "managed";
-        else
-            type = "adhoc";
-
-        netview->addNewItem( type, n.bssid, QString( (const char*) &n.mac ), n.wep, n.channel, 0 );
-
-    }
+    //FIXME: Can stations in ESS mode can be distinguished from APs?
+    //FIXME: Apparently yes, but not by listening to beacons, because
+    //FIXME: they simply don't send beacons in infrastructure mode.
+    //FIXME: so we also have to listen to data packets
 
+    if ( beacon->canIBSS() )
+        type = "adhoc";
     else
+        type = "managed";
 
-    {
-        qDebug( "unknown sniffer command." );
-    }
-
-}
+    OWaveLanManagementSSID* ssid = static_cast<OWaveLanManagementSSID*>( p->child( "802.11 SSID" ) );
+    QString essid = ssid ? ssid->ID() : "<unknown>";
+    OWaveLanManagementDS* ds = static_cast<OWaveLanManagementDS*>( p->child( "802.11 DS" ) );
+    int channel = ds ? ds->channel() : -1;
 
-void Wellenreiter::dataReceived()
-{
-    logwindow->log( "(d) Received data from daemon" );
-    handleMessage();
+    OWaveLanPacket* header = static_cast<OWaveLanPacket*>( p->child( "802.11" ) );
+    netView()->addNewItem( type, essid, header->macAddress2().toString(), header->usesWep(), channel, 0 );
 }
 
 void Wellenreiter::startStopClicked()
 {
-    if ( daemonRunning )
+    if ( sniffing )
     {
-        daemonRunning = false;
+        disconnect( SIGNAL( receivedPacket(OPacket*) ), this, SLOT( receivePacket(OPacket*) ) );
 
-        logwindow->log( "(i) Daemon has been stopped." );
-        setCaption( tr( "Wellenreiter/Opie" ) );
+        iface->setChannelHopping(); // stop hopping channels
+        pcap->close();
+        sniffing = false;
+        oApp->setTitle();
 
-        // Stop daemon - ugly for now... later better
+        // get interface name from config window
+        const QString& interface = configwindow->interfaceName->currentText();
+        ONetwork* net = ONetwork::instance();
+        iface = static_cast<OWirelessNetworkInterface*>(net->interface( interface ));
 
-        system( "killall wellenreiterd" );
+        // switch off monitor mode
+        iface->setMonitorMode( false );
+        // switch off promisc flag
+        iface->setPromiscuousMode( false );
 
-        // get configuration from config window
+        //TODO: Display "please wait..." (use owait?)
 
-        const QString& interface = configwindow->interfaceName->currentText();
-
-        // reset the interface trying to get it into a usable state again
+        /*
 
         QString cmdline;
-        cmdline.sprintf( "iwpriv %s monitor 0; ifdown %s; ifup %s", (const char*) interface, (const char*) interface, (const char*) interface );
-        system( cmdline );
+        cmdline.sprintf( "ifdown %s; sleep 1; ifup %s", (const char*) interface, (const char*) interface, (const char*) interface );
+        system( cmdline ); //FIXME: Use OProcess
+
+        */
 
         // message the user
 
-        QMessageBox::information( this, "Wellenreiter/Opie", "Your wireless card\nshould now be usable again." );
+        //QMessageBox::information( this, "Wellenreiter II", "Your wireless card\nshould now be usable again." );
     }
 
     else
     {
-
         // get configuration from config window
 
         const QString& interface = configwindow->interfaceName->currentText();
         const int cardtype = configwindow->daemonDeviceType();
         const int interval = configwindow->daemonHopInterval();
 
-        if ( ( interface == "<select>" ) || ( cardtype == 0 ) )
+        if ( ( interface == "" ) || ( cardtype == 0 ) )
         {
-            QMessageBox::information( this, "Wellenreiter/Opie", "Your device is not\nptoperly configured. Please reconfigure!" );
+            QMessageBox::information( this, "Wellenreiter II", "Your device is not\nproperly configured. Please reconfigure!" );
             return;
         }
 
-        // start wellenreiterd
+        // configure device
 
-        QString cmdline;
-        cmdline.sprintf( "wellenreiterd %s %d &", (const char*) interface, cardtype );
+        ONetwork* net = ONetwork::instance();
+        iface = static_cast<OWirelessNetworkInterface*>(net->interface( interface ));
+
+        // set monitor mode
+
+        switch ( cardtype )
+        {
+            case 1: iface->setMonitoring( new OCiscoMonitoringInterface( iface ) ); break;
+            case 2: iface->setMonitoring( new OWlanNGMonitoringInterface( iface ) ); break;
+            case 3: iface->setMonitoring( new OHostAPMonitoringInterface( iface ) ); break;
+            case 4: iface->setMonitoring( new OOrinocoMonitoringInterface( iface ) ); break;
+            default: assert( 0 ); // shouldn't happen
+        }
+
+        iface->setMonitorMode( true );
+
+        // open pcap and start sniffing
+        pcap->open( interface );
+
+        if ( !pcap->isOpen() )
+        {
+            QMessageBox::warning( this, "Wellenreiter II", "Can't open packet capturer:\n" + QString(strerror( errno ) ));
+            return;
+        }
+
+        // set capturer to non-blocking mode
+        pcap->setBlocking( false );
+
+        // start channel hopper
+        iface->setChannelHopping( 1000 ); //use interval from config window
 
-        qDebug( "about to execute '%s' ...", (const char*) cmdline );
-        system( cmdline );
-        qDebug( "done!" );
+        // connect
+        connect( pcap, SIGNAL( receivedPacket(OPacket*) ), this, SLOT( receivePacket(OPacket*) ) );
 
         logwindow->log( "(i) Daemon has been started." );
-        daemonRunning = true;
-        setCaption( tr( "Scanning ..." ) );
+        oApp->setTitle( "Scanning ..." );
+        sniffing = true;
 
     }
 }
diff --git a/noncore/net/wellenreiter/gui/wellenreiter.h b/noncore/net/wellenreiter/gui/wellenreiter.h
index ee9dca9..3ec4021 100644
--- a/noncore/net/wellenreiter/gui/wellenreiter.h
+++ b/noncore/net/wellenreiter/gui/wellenreiter.h
@@ -1,82 +1,67 @@
 /**********************************************************************
 ** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
 **
 ** This file is part of Opie Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 **********************************************************************/
 
 #ifndef WELLENREITER_H
 #define WELLENREITER_H
 
 #include "wellenreiterbase.h"
 
 #ifdef QWS
 #include <opie/odevice.h>
 using namespace Opie;
 #endif
 
-// ugly... not here!
-
-#include <assert.h>
-#include <errno.h>
-#include <unistd.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <daemon/source/config.hh>
-#include <libwellenreiter/source/wl_types.hh>
-#include <libwellenreiter/source/wl_sock.hh>
-#include <libwellenreiter/source/wl_proto.hh>
-
 class QTimerEvent;
 class QPixmap;
+class OPacket;
+class OPacketCapturer;
+class OWirelessNetworkInterface;
 class ManufacturerDB;
 class WellenreiterConfigWindow;
 
 class Wellenreiter : public WellenreiterBase {
     Q_OBJECT
 
   public:
     Wellenreiter( QWidget* parent = 0 );
     ~Wellenreiter();
 
     void setConfigWindow( WellenreiterConfigWindow* cw );
     MScanListView* netView() const { return netview; };
     MLogWindow* logWindow() const { return logwindow; };
-    bool isDaemonRunning() const { return daemonRunning; };
-
-  protected:
-    bool daemonRunning;
+    bool isDaemonRunning() const { return sniffing; };
 
   public slots:
-    void dataReceived();
+    void receivePacket(OPacket*);
     void startStopClicked();
 
   private:
-    int daemon_fd;                  // socket filedescriptor for udp communication socket
     #ifdef QWS
     OSystem _system;                // Opie Operating System identifier
     #endif
-    void handleMessage();
 
+    bool sniffing;
+    OWirelessNetworkInterface* iface;
+    OPacketCapturer* pcap;
     ManufacturerDB* manufacturerdb;
     WellenreiterConfigWindow* configwindow;
-    struct sockaddr_in sockaddr;
 
     //void readConfig();
     //void writeConfig();
 };
 
 
 
 #endif
diff --git a/noncore/net/wellenreiter/gui/wlan.cpp b/noncore/net/wellenreiter/gui/wlan.cpp
deleted file mode 100644
index b046cc8..0000000
--- a/noncore/net/wellenreiter/gui/wlan.cpp
+++ b/dev/null
@@ -1,57 +0,0 @@
-/**********************************************************************
-** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
-**
-** This file is part of Opie Environment.
-**
-** This file may be distributed and/or modified under the terms of the
-** GNU General Public License version 2 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-**********************************************************************/
-
-#include "wlan.h"
-#include "cardconfig.h"
-
-// Qt
-#include <qstring.h>
-
-// Qtopia
-#ifdef QWS
-#include <opie/odevice.h>
-using namespace Opie;
-#endif
-
-WLAN::WLAN( const QString& interface )
-{
-    _configuration = new CardConfig( interface );
-}
-
-WLAN::WLAN( const CardConfig* configuration )
-{
-    _configuration = configuration;
-
-}
-
-WLAN::~WLAN()
-{
-    delete _configuration;
-
-}
-  
-void WLAN::setMonitorMode( bool enabled )
-{
-
-    /*
-    
-    if ( _configuration->system() == System_OpenZaurus && _configuration->type() == CardConfig::Prism )
-    {
-    }
-    
-    */
-
-}
-
diff --git a/noncore/net/wellenreiter/gui/wlan.h b/noncore/net/wellenreiter/gui/wlan.h
deleted file mode 100644
index 139e218..0000000
--- a/noncore/net/wellenreiter/gui/wlan.h
+++ b/dev/null
@@ -1,38 +0,0 @@
-/**********************************************************************
-** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
-**
-** This file is part of Opie Environment.
-**
-** This file may be distributed and/or modified under the terms of the
-** GNU General Public License version 2 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-**********************************************************************/
-
-#ifndef WLAN_H
-#define WLAN_H
-
-class QString;
-class CardConfig;
-
-class WLAN
-{
-  public:
-  
-    WLAN( const QString& interface );
-    WLAN( const CardConfig* );
-    virtual ~WLAN();
-    void setMonitorMode( bool enabled );
-    
-  private:
-  
-    const CardConfig* _configuration;
-    
-};
-
-#endif
-
diff --git a/noncore/net/wellenreiter/libwellenreiter/.cvsignore b/noncore/net/wellenreiter/libwellenreiter/.cvsignore
deleted file mode 100644
index 4299fd9..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/.cvsignore
+++ b/dev/null
@@ -1,4 +0,0 @@
-*.o
-*~
-moc_*
-Makefile*
diff --git a/noncore/net/wellenreiter/libwellenreiter/docs/quickintro b/noncore/net/wellenreiter/libwellenreiter/docs/quickintro
deleted file mode 100644
index 97458b7..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/docs/quickintro
+++ b/dev/null
@@ -1,88 +0,0 @@
-
-Name:   libwellenreiter
-Author: Martin J. Muench
-
-NOTE: This is just a very short summary of the functions included 
-in libwellenreiter, written because a lack of time. The whole 
-library will be rewritten with extended documentation and 
-test programs.
-
--- 
-Wellenreiter types:
-In proto.hh the following type (wl_network_t) is declared:
-
-typedef struct {
-  int net_type;    /* 1 = Accesspoint ; 2 = Ad-Hoc   */
-  int ssid_len;    /* Length of SSID                 */
-  int channel;     /* Channel                        */
-  int wep;         /* 1 = WEP enabled ; 0 = disabled */
-  char mac[64];    /* MAC address of Accesspoint     */
-  char bssid[128]; /* BSSID of Accesspoint           */
-} wl_network_t;
-
-When a network is found, the structure has to be set and 
-sent to the send_network_found() function.
-
-When the GUI receives a found network string it calls the 
-get_network_found() function to get its own structure set.
-
---
-Included functions:
-
---
-Protocol:
-
-Send a found network to GUI:
-int send_network_found (const char *, int, void *);
-
-The first two arguments are the guihost and the guiport.
-The third is the filled structure (wl_network_t), that will 
-be send to the GUI.
-
-Setup structure for found network:
-int get_network_found (void *, const char *);
-
-When the GUI receives a new network found packet it calls
-this function and passes a wl_network_t structure and the
-received buffer. The function will strip the data from
-the buffer and set it to the structure.
-
---
-Log to syslog/info:
-void wl_loginfo(const char *, ...);
-
-Log to syslog/err:
-void wl_logerr(const char *, ...);
-
-Use like printf() function with format strings and so on.
-
---
-Setup udp socket for incoming commands:
-int commsock(const char *, int);
-
-Fist argument is the host where it should listen and second
-is the port. Socket is returned, on failure -1 is returned.
-
-
-Recvfrom socket:
-int recv_commsock(int *, char *, int);
-
-First argument is the address of the socket, second is a buffer
-that should be filled in and the third is the maxlength of the
-buffer. On error, -1 is returned, on success the number of 
-packet type is returned. (return value should be used with switch
-command, for types see proto.hh)
-
-Send command to udp socket:
-int sendcomm(const char *, int, const char *, ...);
-
-First two arguments are the host and port where the command should
-be send to, followed by buffer that should be send. On error, -1
-is returned.
-
-
----
-
-Thats it for the moment.
-
-mjm.
diff --git a/noncore/net/wellenreiter/libwellenreiter/docs/wl_conf.8 b/noncore/net/wellenreiter/libwellenreiter/docs/wl_conf.8
deleted file mode 100644
index 8d2fe27..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/docs/wl_conf.8
+++ b/dev/null
@@ -1,17 +0,0 @@
-wl_conf
-
-#include <wellenreiter/wl_conf.hh>
-
-int wl_checkcfg(void);
-int wl_cfgvalue(const char *token, char *out, int maxlen);
-
-wl_checkcfg checks whether the wellenreiter configfile exists.
-wl_cfgvalue searches for the given token and copies maxlen 
-characters of its value to out.
-
-wl_ckeckcfg returns 1 if the file exists and is readable and
-0 on error.
-
-wl_cfgvalue returns -1 on error, 0 if nothing was found and
-1 on success.
-
diff --git a/noncore/net/wellenreiter/libwellenreiter/docs/wl_log.8 b/noncore/net/wellenreiter/libwellenreiter/docs/wl_log.8
deleted file mode 100644
index 00262bd..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/docs/wl_log.8
+++ b/dev/null
@@ -1,12 +0,0 @@
-wl_log
-
-#include <wellenreiter/wl_log.hh>
-
-void wl_loginfo(const char *string, ...)
-void wl_logerr(const char *string, ...)
-
-wl_loginfo() and wl_err() write string to syslog(), 
-either to INFO or to ERR.
-
-no return values
-
diff --git a/noncore/net/wellenreiter/libwellenreiter/docs/wl_sniff.8 b/noncore/net/wellenreiter/libwellenreiter/docs/wl_sniff.8
deleted file mode 100644
index 9a65223..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/docs/wl_sniff.8
+++ b/dev/null
@@ -1,21 +0,0 @@
-sniff.cc
-
-#include <wellenreiter/sniff.hh>
-
-void process_packets(const struct pcap_pkthdr *pkthdr, 
-		     const unsigned char *packet, 
-		     char *guihost, 
-		     int guiport)
-
-The function process_packets() will use libpcap to get the
-informations for a 802.11b packet. When it finds a valid 
-network it calls the wl_send function and sends a found
-network packet to the guiport on the guihost.
-
-
-Return value
-
-none
-
-NOTE: process_packets() is void at the moment because there
-will be alot of non-critical and annoying errors.
diff --git a/noncore/net/wellenreiter/libwellenreiter/docs/wl_sock.8 b/noncore/net/wellenreiter/libwellenreiter/docs/wl_sock.8
deleted file mode 100644
index 62e935b..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/docs/wl_sock.8
+++ b/dev/null
@@ -1,26 +0,0 @@
-wl_sock
-
-#include <wellenreiter/wl_sock.hh>
-
-int wl_setupsock(const char *host, int port, struct sockaddr_in *)
-int wl_send(const char *host, int port, const char *string, ...)
-int wl_recv(int *socket, struct sockaddr_in *, char *out, int len)
-
-
-wl_setupsock() returns the number of the activated udp socket.
-
-wl_send() sends string to the given host.
-
-wl_recv() checks for incoming data on a socket (created using
-wl_setupsock()). It writes the incoming data to out with a
-maxlen of len.
-
-
-wl_setupsock() returns -1 on error and the number of socket on
-success.
-wl_send() returns 0 on error and 1 on success.
-wl_recv() returns -1 on error and the type of the received packet
-on success.
-
-Note: To use this function you have to set a sockaddr_in structure
-and pass it to wl_setupsock and wl_receive.
diff --git a/noncore/net/wellenreiter/libwellenreiter/docs/wl_types.8 b/noncore/net/wellenreiter/libwellenreiter/docs/wl_types.8
deleted file mode 100644
index d12f564..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/docs/wl_types.8
+++ b/dev/null
@@ -1,25 +0,0 @@
-wl_types.hh
-
-wl_types.hh contains the global buffers and type definitions.
-
-At the moment these are:
-
-/* Type definitions, to be continued */
-#define WL_NETFOUND 01
-#define WL_NETLOST  02
-#define WL_STARTSNIFF 98
-#define WL_STOPSNIFF  99
-
-#define WL_SOCKBUF 512 /* Buffer for wl_send and wl_recv calls */
-
-/* WL network structure */
-typedef struct {
-  int net_type;    /* 1 = Accesspoint ; 2 = Ad-Hoc   */
-  int ssid_len;    /* Length of SSID                 */
-  int channel;     /* Channel                        */
-  int wep;         /* 1 = WEP enabled ; 0 = disabled */
-  char mac[64];    /* MAC address of Accesspoint     */
-  char bssid[128]; /* BSSID of Net                   */
-} wl_network_t;
-
-Will be filled up with other structs and size definitions asap.
diff --git a/noncore/net/wellenreiter/libwellenreiter/libwellenreiter.pro b/noncore/net/wellenreiter/libwellenreiter/libwellenreiter.pro
deleted file mode 100644
index 5930c60..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/libwellenreiter.pro
+++ b/dev/null
@@ -1,16 +0,0 @@
-DESTDIR = $(OPIEDIR)/lib
-TEMPLATE = lib
-CONFIG = warn_on debug
-VERSION = 0.2
-HEADERS = source/cardmode.hh source/wl_log.hh source/wl_proto.hh source/sniff.hh source/wl_sock.hh source/wl_types.hh
-SOURCES = source/cardmode.cc source/wl_log.cc source/wl_proto.cc source/sniff.cc source/wl_sock.cc
-
-LIBS = -lpcap
-TMAKE_CFLAGS += -D__UNIX__
-DEFINES += DEBUG
-TARGET = wellenreiter
-
-!contains( platform, x11 ) {
-  include ( $(OPIEDIR)/include.pro )
-}
-
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/.cvsignore b/noncore/net/wellenreiter/libwellenreiter/source/.cvsignore
deleted file mode 100644
index ed65c71..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/.cvsignore
+++ b/dev/null
@@ -1,3 +0,0 @@
-*.o
-*~
-moc_*
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/Makefile b/noncore/net/wellenreiter/libwellenreiter/source/Makefile
deleted file mode 100644
index 0017f05..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/Makefile
+++ b/dev/null
@@ -1,20 +0,0 @@
-# $Id$
-
-OBJ = wl_proto.o wl_sock.o wl_log.o wl_conf.o cardmode.o sniff.o 
-CPP = g++
-CPPFLAGS = -Wall -pedantic -g -DDEBUG
-
-%.o : %.cc
-	$(CPP) $(CPPFLAGS) -c $< -o $@
-
-static:	libwellenreiter.a
-libwellenreiter.a: $(OBJ)
-	ar -cr libwellenreiter.a $(OBJ)
-
-shared:	libwellenreiter.so
-libwellenreiter.so: $(OBJ)
-	$(CPP) $(CPPFLAGS) -shared -o libwellenreiter.so $(OBJ)
-
-clean:
-	rm -f *.o *.a *.so *~
-
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
deleted file mode 100644
index 4f187c0..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
+++ b/dev/null
@@ -1,451 +0,0 @@
-/* 
- * Set card modes for sniffing
- *
- * $Id$
- */
-
-#include "cardmode.hh"
-#include "wl_log.hh"
-pcap_t *handletopcap;
-/* main card into monitor function */
-int card_into_monitormode (const char *device, int cardtype)
-{
-  char CiscoRFMON[35] = "/proc/driver/aironet/";
-  FILE *CISCO_CONFIG_FILE;
-
-  /* Checks if we have a device to sniff on */
-  if(device == NULL)
-  {
-      wl_logerr("No device given");
-      return 0;
-  }
-  
-  /* Setting the promiscous and up flag to the interface */
-  if (!card_set_promisc_up(device))
-  {
-    wl_logerr("Cannot set interface to promisc mode");
-    return 0;
-  } 
-  wl_loginfo("Interface set to promisc mode");
-  
-  /* Check the cardtype and executes the commands to go into monitor mode */
-  if (cardtype == CARD_TYPE_CISCO)
-  {
-      /* bring the sniffer into rfmon  mode */
-      snprintf(CiscoRFMON, sizeof(CiscoRFMON) - 1, DEFAULT_PATH, device);
-      if((CISCO_CONFIG_FILE = fopen(CiscoRFMON,"w")) == NULL)
-      {
-	  wl_logerr("Cannot open config file: %s", strerror(errno));
-	  return 0;
-      }
-      fputs ("Mode: r",CISCO_CONFIG_FILE);
-      fputs ("Mode: y",CISCO_CONFIG_FILE);
-      fputs ("XmitPower: 1",CISCO_CONFIG_FILE);
-      fclose(CISCO_CONFIG_FILE);
-  }
-  else if (cardtype == CARD_TYPE_NG)
-  {
-      char wlanngcmd[80];
-      snprintf(wlanngcmd, sizeof(wlanngcmd) - 1, "$(which wlanctl-ng) %s lnxreq_wlansniff channel=%d enable=true", device, 1);
-      if (system(wlanngcmd) != 0)
-      {
-	  wl_logerr("Could not set %s in raw mode, check cardtype", device);
-	  return 0;
-      }
-  }
-  else if (cardtype == CARD_TYPE_HOSTAP)
-  {
-#if WIRELESS_EXT > 14
-          // IW_MODE_MONITOR was implemented in Wireless Extensions Version 15
-	  int skfd;
-	  skfd = socket(AF_INET, SOCK_STREAM, 0);
-	  struct iwreq wrq;
-	  wrq.u.mode = IW_MODE_MONITOR;
-
-	  if(iw_set_ext(skfd,(char *) device,SIOCSIWMODE,&wrq)<0)
- 	 {
-  	  wl_logerr("Could not set hostap card %s to raw mode, check cardtype", device);
-  	  return 0;
-      }
-      else
-      {
-	    wl_loginfo("Successfully set hostap card %s into raw mode",device);
-	    return 1;
-      }
-    return 1;
-#else
-       // Wireless Extensions < Version 15 need iwpriv commandos for monitoring
-       int fd;
-   	//Wireless tools structure for the iocalls
-   	struct iwreq ireq;  
-   	int *ptr;
-	   /* Socket needed to use the iocall to */
-	   fd = socket(AF_INET, SOCK_STREAM, 0);
-
-	   if ( fd == -1 ) {
- 	     return -1;
- 	  }
-
-	   ptr = (int *) ireq.u.name;
-	   // This is the monitor mode for 802.11 non-prism header
-	   ptr[0] = 2;
-	   strcpy(ireq.ifr_ifrn.ifrn_name, device);
-	   if (ioctl( fd, SIOCDEVPRIVATE, &ireq)==0)
-	   {
-		  /* All was fine... */
-		  close(fd);
-  		wl_loginfo("Set hostap card %s into monitormode",device);
-	       return 1;
-	   }
-	   else
-	   {
-	   	   /* iocall does not work */
-			close(fd);
-			wl_logerr("Could not set hostap card %s into monitormode, check cardtype",device);
-			return 0;
-	   }
-#endif
-  }
-  else if (cardtype == CARD_TYPE_ORINOCCO )
-  {
-	 if (!card_set_channel (device, 1, CARD_TYPE_ORINOCCO))
-	 {
-  	  wl_logerr("Could not set %s in raw mode, check cardtype", device);
-  	  return 0;
-      }
-      else
-      {
-	    wl_loginfo("Successfully set %s into raw mode",device);
-      }
-  }
-
-  /* Setting the promiscous and up flag to the interface */
-  if (!card_check_rfmon_datalink(device))
-  {
-    wl_logerr("Cannot set interface to rfmon mode");
-    return 0;
-  }
-  else 
-  {
-    wl_loginfo("Interface set to rfmon mode");
-  }
-  return 1;
-}
-
-/* Check card is in the rfmon mode */
-int card_check_rfmon_datalink (const char *device)
-{
-  int datalinktype=0;
-  pcap_t *phandle;
-  phandle = pcap_open_live((char *)device, 65,0,0,NULL);
-  datalinktype = pcap_datalink (phandle);
-  pcap_close(phandle);
-
-  if (datalinktype != DLT_IEEE802_11) /* Rawmode is IEEE802_11 */
-    {
-        return 0;
-    }
-  else
-  {
-    wl_loginfo("Your successfully listen on %s in 802.11 raw mode", device);
-    return 1; 
-  }
-}
-
-/* Ipaq running familiar does not have a loopback device, we need one */
-int check_loopback()
-{
-    /* Checking for a loopback interface with 127.0.0.1, otherwise the other stuff seems to fail on
-     familiar linux on ipaq's */
-    int err;
-    /* First generate a socket to use with iocalls */
-    int fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (fd < 0)
-    {
-        /* In case of an error */
-        wl_logerr("check_loopback, generation of a socket failed, cannot continue");
-        return 0;
-    }
-    /* Fill an empty an interface structure with the right flags (UP and Promsic) */
-    struct ifreq ifr;
-    strncpy(ifr.ifr_name, "lo",3);
-
-	/* Get the interface flags, loopback interfaces can be detected that way */
-    err = ioctl(fd, SIOCGIFFLAGS, &ifr);
-    if (err < 0)
-    {
-        wl_logerr("check_loopback, could not get the flags of lo, check if you got a lo loopback interface, cannot continue");
-    	close(fd);
-        return 0;
-    }
-	/* Checking the flags for IFF_LOOPBACK flags */
-    if(ifr.ifr_flags && IFF_LOOPBACK)
-    {
-    	/* Yes, we do have a loopback interface....sup! */
-    	close(fd);
-        wl_loginfo ("check_loopback, check for loopback interface lo successful");
-        return 1;
-    }
-    else
-    {
-		wl_logerr("check_loopback, did not found an interface lo with the IFF_LOOPBACK flag set, cannot continue");
-		close(fd);
-        return 0;
-    }
-	/* Should never be reached */
-	return 0;
-} /*check_loopback */
-
-
-/* Set card into promisc mode */
-int card_set_promisc_up (const char *device)
-{
-    int err;
-    /* First generate a socket to use with iocalls */
-    int fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (fd < 0)
-    {
-        /* In case of an error */
-        perror("socket");
-        return 0;
-    }
-
-    /* Fill an empty an interface structure with the right flags (UP and Promsic) */
-    struct ifreq ifr;
-    strncpy(ifr.ifr_name, device,10);
-    ifr.ifr_flags = IFF_UP + IFF_PROMISC;
-    err = ioctl(fd, SIOCSIFFLAGS, &ifr);
-    if (err < 0)
-    {
-    	perror("Could not access the interface, ");
-    	close(fd);
-        return 0;
-    }
-    
-    /* Get the informations back from the interface to check if the flags are correct */
-    strncpy(ifr.ifr_name, device,10);
-    err = ioctl(fd, SIOCGIFFLAGS, &ifr);
-    if (err < 0)
-    {
-        perror("Could not access the interface, ");
-    	close(fd);
-        return 0;
-    }
-
-    if(ifr.ifr_flags && IFF_UP)
-    {
-    	close(fd);
-        return 1;
-    }
-    else
-    {
-		wl_logerr("Could not set promisc flag on %d", device);
-		close(fd);
-        return 0;
-    }
-}
-
-/* Remove card from promisc mode */
-int card_remove_promisc (const char *device)
-{
-    int err;
-    /* First generate a socket to use with iocalls */
-    int fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (fd < 0)
-    {
-        /* In case of an error */
-        perror("socket");
-        return 0;
-    }
-
-    /* Fill an empty an interface structure with the right flags (UP and Promsic) */
-    struct ifreq ifr;
-    /* Get the flags from the interface*/
-    strncpy(ifr.ifr_name, device,10);
-    err = ioctl(fd, SIOCGIFFLAGS, &ifr);
-    if (err < 0)
-    {
-        perror("Could not access the interface, ");
-    	close(fd);
-        return 0;
-    }
-	/* Remove the IFF_PROMISC flag */
-    ifr.ifr_flags = ifr.ifr_flags - IFF_PROMISC;
-    /*Set the new flags to the interface*/
-    err = ioctl(fd, SIOCSIFFLAGS, &ifr);
-    if (err < 0)
-    {
-    	perror("Could not access the interface, ");
-    	close(fd);
-        return 0;
-    }
-
-	/* Get the flags again to check if IFF_PROMISC is removed */
-    err = ioctl(fd, SIOCGIFFLAGS, &ifr);
-    if (err < 0)
-    {
-        perror("Could not access the interface, ");
-    	close(fd);
-        return 0;
-    }
-    if(ifr.ifr_flags && IFF_PROMISC)
-    {
-		wl_logerr("Could not remove the promisc flag on %d", device);
-		close(fd);
-        return 0;
-    }
-    else
-    {
-	    /* Successfully removed the promisc flags */		
-    	close(fd);
-        return 1;
-    }
-}
-
-
-
-
-/* Set channel (Wireless frequency) of the device */
-int card_set_channel (const char *device, int channel, int cardtype)
-{
-    if (cardtype == CARD_TYPE_CISCO || cardtype == CARD_TYPE_NG)
-    {
-    	/* Cisco and wlan-ng drivers don't need channelswitching */
-    	return 1;
-    }
-    /* If it is a lucent orinocco card */ 
-    else if (cardtype == CARD_TYPE_ORINOCCO)
-    {
-    	int fd;
-   	//Wireless tools structure for the iocalls
-   	struct iwreq ireq;  
-   	int *ptr;
-	   /* Socket needed to use the iocall to */
-	   fd = socket(AF_INET, SOCK_STREAM, 0);
-
-	   if ( fd == -1 ) {
- 	     return -1;
- 	  }
-
-	   ptr = (int *) ireq.u.name;
-	   // This is the monitor mode for 802.11 non-prism header
-	   ptr[0] = 2;
-	   ptr[1] = channel;
-	   strcpy(ireq.ifr_ifrn.ifrn_name, device);
-	   if (ioctl( fd, SIOCIWFIRSTPRIV + 0x8, &ireq)==0)
-	   {
-		  /* All was fine... */
-		  close(fd);
-  		wl_loginfo("Set channel %d on interface %s",channel, device);
-	       return 1;
-	   }
-	   else
-	   {
-	   	   /* iocall does not work */
-			close(fd);
-			wl_logerr("Could not set channel %d on %s, check cardtype",channel, device);
-			return 0;
-	   }
-    }
-	/* when it is an hostap card you need another iocall for channel switching */
-	    else if (cardtype == CARD_TYPE_HOSTAP)
-    {
-	  int skfd;  	
-      skfd = socket(AF_INET, SOCK_STREAM, 0);
-	  struct iwreq wrq;
-      iw_float2freq((double) channel, &wrq.u.freq);
-
-	  if(iw_set_ext(skfd,(char *) device,SIOCSIWFREQ,&wrq)<0)
- 	 {
-  	  wl_logerr("Could not set hostap card %s to channel %d", device, channel);
-  	  return 0;
-      }
-      else
-      {
-	    wl_loginfo("Successfully set hostap card %s to channel %d", device, channel);
-	    return 1;
-      }
-	}
-    /* For undefined situations */
-	return 0;
-}
-
-
-int card_detect_channels (char * device)
-{
-	int skfd;
-    skfd = socket(AF_INET, SOCK_STREAM, 0);
-    struct iw_range	range;
-    /* Get list of frequencies / channels */
-		printf ("\n hostap card get the frequencies");
-        /* Get list of frequencies / channels */
-        if(iw_get_range_info(skfd, device, &range) < 0)
- 	   {   /* We are failsave if something went wrong, asume only 11 channels */
- 	   	return 11;
- 	   }
- 	   else
-        {
-        	if(range.num_frequency > 0)
-			{
-				return range.num_frequency;
-			}
-			else
-			{   /* We are failsave asume only 11 channels */
-				return 11;
-			}
-		}
-
-} /* End of card_detect_channels */ 
-
-int iw_get_range_info(int skfd, const char * ifname,  iw_range * range)
-{
-  struct iwreq wrq2;
-  char   buffer[sizeof(iw_range) * 2];	/* Large enough */
-
-  /* Cleanup */
-  memset(buffer, 0, sizeof(buffer));
-  wrq2.u.data.pointer = (caddr_t) buffer;
-  wrq2.u.data.length = sizeof(buffer);
-  wrq2.u.data.flags = 0;
-
-  if(iw_get_ext(skfd, (char *)ifname, SIOCGIWRANGE, &wrq2) < 0)
-  {
-      wl_logerr("Could not get the range from the interface");
-  	return(-1);
-  }
-  else
-  {
-      /* Copy stuff at the right place, ignore extra */
-      memcpy((char *) range, buffer, sizeof(iw_range));
-      return 0;
-  }
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Convert our internal representation of frequencies to a floating point.
- */  
-double iw_freq2float(iw_freq *  in)
-{
-  int           i;
-  double        res = (double) in->m;
-  for(i = 0; i < in->e; i++)
-    res *= 10;
-  return(res);
-}
-
-
-void iw_float2freq(double	in, iw_freq *	out)
-{
-  /* Version without libm : slower */
-  out->e = 0;
-  while(in > 1e9)
-    {
-      in /= 10;
-      out->e++;
-    }
-  out->m = (long) in;
-}
-
-
-
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
deleted file mode 100644
index 73e0ae1..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
+++ b/dev/null
@@ -1,107 +0,0 @@
-/* $Id$ */
-
-#ifndef CARDMODE_HH
-#define CARDMODE_HH
-
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-#include <linux/if.h>
-
-/* Following typedefs are needed here, because linux/wireless.h
-   includes linux/ethertool.h which is using them */
-typedef signed char s8;
-typedef unsigned char u8;
-typedef signed short s16;
-typedef unsigned short u16;
-typedef signed int s32;
-typedef unsigned int u32;
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#include <linux/wireless.h>
-
-#ifndef SIOCIWFIRSTPRIV
-#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
-#endif
-
-extern "C"
-{
-#include <net/bpf.h>
-#include <pcap.h>  
-}
-
-extern pcap_t *handletopcap;
-
-/* Defines, used for the card setup */
-#define   DEFAULT_PATH       "/proc/driver/aironet/%s/Config"
-#define   CISCO_STATUS       "/proc/driver/aironet/%s/Status"
-#define   CARD_TYPE_CISCO       1
-#define   CARD_TYPE_NG          2
-#define   CARD_TYPE_HOSTAP      3
-#define   CARD_TYPE_ORINOCCO    4
-
-/* Some usefull constants for frequencies */
-#define KILO    1e3
-#define MEGA    1e6
-#define GIGA    1e9
-
-
-/* only for now, until we have the daemon running */
-/*the config file should provide these information */
-#define   CARD_TYPE              CARD_TYPE_HOSTAP
-
-/* Prototypes */
-int card_check_rfmon_datalink (const char *device);
-int card_into_monitormode (const char *, int);
-int check_loopback();
-int card_set_promisc_up (const char *device);
-int card_remove_promisc (const char *device);
-int card_set_channel (const char *device, int channel,int cardtype); 
-int iw_get_range_info(int skfd, const char * ifname,  struct iw_range * range);
-double iw_freq2float(iw_freq * in);
-void iw_float2freq(double in, iw_freq *	out);
-int card_detect_channels (char * device);
-
-/*------------------------------------------------------------------*/
-/*
- * Wrapper to push some Wireless Parameter in the driver
- */
-static inline int
-iw_set_ext(int			skfd,		/* Socket to the kernel */
-	   char *		ifname,		/* Device name */
-	   int			request,	/* WE ID */
-	   struct iwreq *	pwrq)		/* Fixed part of the request */
-{
-  /* Set device name */
-  strncpy(pwrq->ifr_name, ifname, IFNAMSIZ);
-  /* Do the request */
-  return(ioctl(skfd, request, pwrq));
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wrapper to extract some Wireless Parameter out of the driver
- */
-static inline int
-iw_get_ext(int			skfd,		/* Socket to the kernel */
-	   char *		ifname,		/* Device name */
-	   int			request,	/* WE ID */
-	   struct iwreq *	pwrq)		/* Fixed part of the request */
-{
-  /* Set device name */
-  strncpy(pwrq->ifr_name, ifname, IFNAMSIZ);
-  /* Do the request */
-  return(ioctl(skfd, request, pwrq));
-}
-
-
-
-#endif /* CARDMODE_HH */
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/extract.hh b/noncore/net/wellenreiter/libwellenreiter/source/extract.hh
deleted file mode 100644
index f948bcb..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/extract.hh
+++ b/dev/null
@@ -1,59 +0,0 @@
-/* $Id$ */
-/*
- * Copyright (c) 1992, 1993, 1994, 1995, 1996
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that: (1) source code distributions
- * retain the above copyright notice and this paragraph in its entirety, (2)
- * distributions including binary code include the above copyright notice and
- * this paragraph in its entirety in the documentation or other materials
- * provided with the distribution, and (3) all advertising materials mentioning
- * features or use of this software display the following acknowledgement:
- * ``This product includes software developed by the University of California,
- * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
- * the University nor the names of its contributors may be used to endorse
- * or promote products derived from this software without specific prior
- * written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-/* Network to host order macros */
-
-#ifndef EXTRACT_HH
-#define EXTRACT_HH
-
-#ifdef LBL_ALIGN
-#define EXTRACT_16BITS(p) \
-	((u_int16_t)((u_int16_t)*((const u_int8_t *)(p) + 0) << 8 | \
-		     (u_int16_t)*((const u_int8_t *)(p) + 1)))
-#define EXTRACT_32BITS(p) \
-	((u_int32_t)((u_int32_t)*((const u_int8_t *)(p) + 0) << 24 | \
-		     (u_int32_t)*((const u_int8_t *)(p) + 1) << 16 | \
-		     (u_int32_t)*((const u_int8_t *)(p) + 2) << 8 | \
-		     (u_int32_t)*((const u_int8_t *)(p) + 3)))
-#else
-#define EXTRACT_16BITS(p) \
-	((u_int16_t)ntohs(*(const u_int16_t *)(p)))
-#define EXTRACT_32BITS(p) \
-	((u_int32_t)ntohl(*(const u_int32_t *)(p)))
-#endif
-
-#define EXTRACT_24BITS(p) \
-	((u_int32_t)((u_int32_t)*((const u_int8_t *)(p) + 0) << 16 | \
-		     (u_int32_t)*((const u_int8_t *)(p) + 1) << 8 | \
-		     (u_int32_t)*((const u_int8_t *)(p) + 2)))
-
-/* Little endian protocol host order macros */
-#define EXTRACT_LE_8BITS(p) (*(p))
-#define EXTRACT_LE_16BITS(p) \
-	((u_int16_t)((u_int16_t)*((const u_int8_t *)(p) + 1) << 8 | \
-		     (u_int16_t)*((const u_int8_t *)(p) + 0)))
-#define EXTRACT_LE_32BITS(p) \
-	((u_int32_t)((u_int32_t)*((const u_int8_t *)(p) + 3) << 24 | \
-		     (u_int32_t)*((const u_int8_t *)(p) + 2) << 16 | \
-		     (u_int32_t)*((const u_int8_t *)(p) + 1) << 8 | \
-		     (u_int32_t)*((const u_int8_t *)(p) + 0)))
-
-#endif /* EXTRACT_HH */
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/ieee802_11.hh b/noncore/net/wellenreiter/libwellenreiter/source/ieee802_11.hh
deleted file mode 100644
index 872fd40..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/ieee802_11.hh
+++ b/dev/null
@@ -1,250 +0,0 @@
-/* $Id$ */
-/*
- * Copyright (c) 2001
- *	Fortress Technologies
- *      Charlie Lenahan ( clenahan@fortresstech.com )
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that: (1) source code distributions
- * retain the above copyright notice and this paragraph in its entirety, (2)
- * distributions including binary code include the above copyright notice and
- * this paragraph in its entirety in the documentation or other materials
- * provided with the distribution, and (3) all advertising materials mentioning
- * features or use of this software display the following acknowledgement:
- * ``This product includes software developed by the University of California,
- * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
- * the University nor the names of its contributors may be used to endorse
- * or promote products derived from this software without specific prior
- * written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef IEEE802_11_HH
-#define IEEE802_11_HH
-
-#define IEEE802_11_FC_LEN	2
-
-#define T_MGMT 0x0  /* management */
-#define T_CTRL 0x1  /* control */
-#define T_DATA 0x2 /* data */
-#define T_RESV 0x3  /* reserved */
-
-#define ST_ASSOC_REQUEST   	0x0
-#define ST_ASSOC_RESPONSE 	0x1
-#define ST_REASSOC_REQUEST   	0x2
-#define ST_REASSOC_RESPONSE  	0x3
-#define ST_PROBE_REQUEST   	0x4
-#define ST_PROBE_RESPONSE   	0x5
-/* RESERVED 			0x6  */
-/* RESERVED 			0x7  */
-#define ST_BEACON   		0x8
-#define ST_ATIM			0x9
-#define ST_DISASSOC		0xA
-#define ST_AUTH			0xB
-#define ST_DEAUTH		0xC
-/* RESERVED 			0xD  */
-/* RESERVED 			0xE  */
-/* RESERVED 			0xF  */
-
-
-#define CTRL_PS_POLL	0xA
-#define CTRL_RTS	0xB
-#define CTRL_CTS	0xC
-#define CTRL_ACK	0xD
-#define CTRL_CF_END	0xE
-#define CTRL_END_ACK	0xF
-
-/*
- * Bits in the frame control field.
- */
-#define FC_VERSION(fc)		((fc) & 0x3)
-#define FC_TYPE(fc)		(((fc) >> 2) & 0x3)
-#define FC_SUBTYPE(fc)		(((fc) >> 4) & 0xF)
-#define FC_TO_DS(fc)		((fc) & 0x0100)
-#define FC_FROM_DS(fc)		((fc) & 0x0200)
-#define FC_MORE_FLAG(fc)	((fc) & 0x0400)
-#define FC_RETRY(fc)		((fc) & 0x0800)
-#define FC_POWER_MGMT(fc)	((fc) & 0x1000)
-#define FC_MORE_DATA(fc)	((fc) & 0x2000)
-#define FC_WEP(fc)		((fc) & 0x4000)
-#define FC_ORDER(fc)		((fc) & 0x8000)
-
-struct mgmt_header_t {
-  u_int16_t	fc;
-  u_int16_t 	duration;
-  u_int8_t	da[6];
-  u_int8_t	sa[6];
-  u_int8_t	bssid[6];
-  u_int16_t	seq_ctrl;
-};
-
-#define MGMT_HEADER_LEN	(2+2+6+6+6+2)
-
-#define CAPABILITY_ESS(cap)	((cap) & 0x0001)
-#define CAPABILITY_IBSS(cap)	((cap) & 0x0002)
-#define CAPABILITY_CFP(cap)	((cap) & 0x0004)
-#define CAPABILITY_CFP_REQ(cap)	((cap) & 0x0008)
-#define CAPABILITY_PRIVACY(cap)	((cap) & 0x0010)
-
-struct ssid_t {
-  u_int8_t	element_id;
-  u_int8_t	length;
-  u_char		ssid[33];  /* 32 + 1 for null */
-} ;
-
-struct rates_t {
-  u_int8_t	element_id;
-  u_int8_t	length;
-  u_int8_t	rate[8];
-};
-
-struct challenge_t {
-  u_int8_t	element_id;
-  u_int8_t	length;
-  u_int8_t	text[254]; /* 1-253 + 1 for null */
-};
-struct fh_t {
-  u_int8_t	element_id;
-  u_int8_t	length;
-  u_int16_t	dwell_time;
-  u_int8_t	hop_set;
-  u_int8_t 	hop_pattern;
-  u_int8_t	hop_index;
-};
-
-struct ds_t {
-  u_int8_t	element_id;
-  u_int8_t	length;
-  u_int8_t	channel;
-};
-
-struct cf_t {
-  u_int8_t	element_id;
-  u_int8_t	length;
-  u_int8_t	count;
-  u_int8_t	period;
-  u_int16_t	max_duration;
-  u_int16_t	dur_remaing;
-};
-
-struct tim_t {
-  u_int8_t	element_id;
-  u_int8_t	length;
-  u_int8_t	count;
-  u_int8_t	period;
-  u_int8_t	bitmap_control;
-  u_int8_t	bitmap[251];
-};
-
-#define E_SSID 		0
-#define E_RATES 	1
-#define E_FH	 	2
-#define E_DS 		3
-#define E_CF	 	4
-#define E_TIM	 	5
-#define E_IBSS 		6
-#define E_CISCO		133
-/* reserved 		7 */
-/* reserved 		8 */
-/* reserved 		9 */
-/* reserved 		10 */
-/* reserved 		11 */
-/* reserved 		12 */
-/* reserved 		13 */
-/* reserved 		14 */
-/* reserved 		15 */
-/* reserved 		16 */
-
-#define E_CHALLENGE 	16
-/* reserved 		17 */
-/* reserved 		18 */
-/* reserved 		19 */
-/* reserved 		16 */
-/* reserved 		16 */
-
-
-struct mgmt_body_t {
-  u_int8_t   	timestamp[8];
-  u_int16_t  	beacon_interval;
-  u_int16_t 	listen_interval;
-  u_int16_t 	status_code;
-  u_int16_t 	aid;
-  u_char		ap[6];
-  u_int16_t	reason_code;
-  u_int16_t	auth_alg;
-  u_int16_t	auth_trans_seq_num;
-  struct challenge_t  challenge;
-  u_int16_t	capability_info;
-  struct ssid_t	ssid;
-  struct rates_t 	rates;
-  struct ds_t	ds;
-  struct cf_t	cf;
-  struct fh_t	fh;
-  struct tim_t	tim;
-};
-
-struct ctrl_rts_t {
-  u_int16_t	fc;
-  u_int16_t	duration;
-  u_int8_t	ra[6];
-  u_int8_t	ta[6];
-  u_int8_t	fcs[4];
-};
-
-#define CTRL_RTS_LEN	(2+2+6+6+4)
-
-struct ctrl_cts_t {
-  u_int16_t	fc;
-  u_int16_t	duration;
-  u_int8_t	ra[6];
-  u_int8_t	fcs[4];
-};
-
-#define CTRL_CTS_LEN	(2+2+6+4)
-
-struct ctrl_ack_t {
-  u_int16_t	fc;
-  u_int16_t	duration;
-  u_int8_t	ra[6];
-  u_int8_t	fcs[4];
-};
-
-#define CTRL_ACK_LEN	(2+2+6+4)
-
-struct ctrl_ps_poll_t {
-  u_int16_t	fc;
-  u_int16_t	aid;
-  u_int8_t	bssid[6];
-  u_int8_t	ta[6];
-  u_int8_t	fcs[4];
-};
-
-#define CTRL_PS_POLL_LEN	(2+2+6+6+4)
-
-struct ctrl_end_t {
-  u_int16_t	fc;
-  u_int16_t	duration;
-  u_int8_t	ra[6];
-  u_int8_t	bssid[6];
-  u_int8_t	fcs[4];
-};
-
-#define CTRL_END_LEN	(2+2+6+6+4)
-
-struct ctrl_end_ack_t {
-  u_int16_t	fc;
-  u_int16_t	duration;
-  u_int8_t	ra[6];
-  u_int8_t	bssid[6];
-  u_int8_t	fcs[4];
-};
-
-#define CTRL_END_ACK_LEN	(2+2+6+6+4)
-
-#define IV_IV(iv)	((iv) & 0xFFFFFF)
-#define IV_PAD(iv)	(((iv) >> 24) & 0x3F)
-#define IV_KEYID(iv)	(((iv) >> 30) & 0x03)
-
-#endif /* IEEE802_11_HH */
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/sniff.cc b/noncore/net/wellenreiter/libwellenreiter/source/sniff.cc
deleted file mode 100644
index 0616a7e..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/sniff.cc
+++ b/dev/null
@@ -1,419 +0,0 @@
-/* 
- *  rfmon mode sniffer
- *
- *  $Id$
- */
-
-#include "sniff.hh"
-#include "ieee802_11.hh"
-#include "extract.hh"
-#include "wl_log.hh"
-#include "wl_types.hh"
-#include "wl_proto.hh"
-#include "cardmode.hh"
-
-int start_sniffer(const char *device, int cardtype )
-{
-	
-	/* This function initialize the sniffing
-	   1. Check for lo interface
-	   2. bring it into promsicous mode and UP
-	   3. bring device into rfmon mode
-	   start the pcap sniffing process.
-	  */
-
-  	/* Do we have the device name ? */
-	  if(device == NULL)
- 	 {
-  	    wl_logerr("start_sniffer, parameter \"device\" is empty, please check your config");
-   	   return 0;
-  	}
-	
-	/* Some Linux System does not have a loopback device lo with 127.0.0.1 so sockets could 
-	   not made correctly, let the proggie check that and proceed only if it exists. */
-	if (!check_loopback())
-	{
-		wl_logerr("start_sniffer, check_loopback failed, cannot continue without a loopback");
-		return 0;
-	}
-
-	/* Set the card into regulary promiscous mode first and set the UP flag, in case no ip 
-	   was given. It would work without the promisc flags but i dont like this */
-	if (!card_set_promisc_up(device))
-        {
-    		wl_logerr("start_sniffer, card_set_promisc_up failed, cannot continue");
-    		return 0;
-    	} 
-
-	/* Set card into the rfmon/monitoring mode */
-	if (!card_into_monitormode(device,cardtype))
-    {
-	    wl_logerr("start_sniffer, cannot put wireless card into monitoring mode, aborting");
-		return 0;
-	}
-
-    /* setup pcap handle, used for the packet decoding etc. */
-    if((handletopcap = pcap_open_live((char *) device, BUFSIZ, 1, 0, NULL)) == NULL)
-    {
-    	wl_logerr("pcap_open_live() failed: %s", strerror(errno));
-    	return 0;
-    }
-  
-#ifdef HAVE_PCAP_NONBLOCK
-  pcap_setnonblock(handletopcap, 1, NULL);
-#endif
-	return 1;
-}
-
-
-int stop_sniffer(const char *device, int cardtype)
-{
-	/* This function terminates the sniffing 
-	   1. get the device state
-	   2. remove the rfmon state
-	   3. Remove the promisc state
-	   start the pcap sniffing process.
-	   
-	  */
-
-	/* Do we really have at least a lo interface with the 127.0.0.1 ? */
-	return 0;	
-
-}
-
-
-/* Main function, checks packets */
-void process_packets(const struct pcap_pkthdr *pkthdr, 
-		     const unsigned char *packet, 
-		     char *guihost, 
-		     int guiport)
-{
-  unsigned int caplen = pkthdr->caplen;
-  unsigned int length = pkthdr->len;
-  u_int16_t fc;
-  unsigned int HEADER_LENGTH;
-  
-  /* pinfo holds all interresting information for us */
-  struct packetinfo pinfo;
-  struct packetinfo *pinfoptr;
-
-  /* wl_network_t will finally be set and send to the ui */
-  wl_network_t wl_net;
-
-  pinfoptr=&pinfo;
-  
-  pinfoptr->isvalid = 0;
-  pinfoptr->pktlen = pkthdr->len;
-  
-  if (caplen < IEEE802_11_FC_LEN) 
-  {
-      /* This is a garbage packet, because is does not long enough
-	 to hold a 802.11b header */
-      pinfoptr->isvalid = 0;
-      return;
-  }
-  
-  /* Gets the framecontrol bits (2bytes long) */
-  fc = EXTRACT_LE_16BITS(packet);
-  
-  HEADER_LENGTH = GetHeaderLength(fc);
-  
-  if (caplen < HEADER_LENGTH) 
-  {
-      /* This is a garbage packet, because it is not long enough
-	 to hold a correct header of its type */
-      pinfoptr->isvalid = 0;
-      return;
-  }
-  
-  /* Decode 802.11b header out of the packet */
-  if (decode_80211b_hdr(packet,pinfoptr) == 0)
-  {
-      /* Justification of the ofset to further process the packet */
-      length -= HEADER_LENGTH;
-      caplen -= HEADER_LENGTH;
-      packet += HEADER_LENGTH;
-  }
-  else /* Something is wrong,could not be a correct packet */
-    return;
-  
-  switch (FC_TYPE(fc)) 
-  {
-      /* Is it a managemnet frame? */
-    case T_MGMT:
-      switch (FC_SUBTYPE(fc))
-      {
-	case ST_BEACON:
-	  if (handle_beacon(fc, packet,pinfoptr) ==0)
-	  {
-	      if (!strcmp(pinfoptr->desthwaddr,"ff:ff:ff:ff:ff:ff") == 0)
-	      {
-		  /* Every beacon must have the broadcast as destination
-		     so it must be a shitti packet */
-		  pinfoptr->isvalid = 0;
-		  return;
-	      } 
-	      
-	      if (pinfoptr->cap_ESS == pinfoptr->cap_IBSS)
-	      {
-		  /* Only one of both are possible, so must be 
-		     a noise packet, if this comes up */
-		  pinfoptr->isvalid = 0;
-		  return;
-	      }
-	      if (pinfoptr->channel < 1 || pinfoptr->channel > 14)
-	      {
-		  /* Only channels between 1 and 14 are possible
-		     others must be noise packets */
-		  pinfoptr->isvalid = 0;
-		  return;
-	      }
-
-	      /* Here should be the infos to the gui issued */
-	      if (pinfoptr->cap_ESS == 1 && pinfoptr->cap_IBSS ==0)
-	      {
-		wl_loginfo("Found an access point");
-		wl_net.net_type=1;
-	      }
-	      else if(pinfoptr->cap_ESS == 0 && pinfoptr->cap_IBSS == 2) 
-	      {
-		wl_loginfo("Found an ad-hoc network");
-		wl_net.net_type=2;
-	      }
-
-	      if (strcmp (pinfoptr->ssid,NONBROADCASTING) ==0)
-		  wl_loginfo("Net is a non-broadcasting network");
-	      else
-		  wl_loginfo("SSID is: %s", pinfoptr->ssid);
-
-              wl_loginfo("SSID is: %s", pinfoptr->ssid);
-              memset(wl_net.bssid, 0, sizeof(wl_net.bssid));
-	      memcpy(wl_net.bssid, pinfoptr->ssid, sizeof(wl_net.bssid)-1);
-
-	      wl_loginfo("SSID length is: %d", pinfoptr->ssid_len);
-	      wl_net.ssid_len=pinfoptr->ssid_len;
-	    
-              wl_loginfo("Channel is: %d", pinfoptr->channel);
-	      wl_net.channel=pinfoptr->channel;
-	      wl_net.wep=pinfoptr->cap_WEP;
-
-	      wl_loginfo("Mac is: %s", pinfoptr->sndhwaddr);
-	      memset(wl_net.mac, 0, sizeof(wl_net.mac));
-	      memcpy(wl_net.mac, pinfoptr->sndhwaddr, sizeof(wl_net.mac)-1);
-	      
-	      if(!send_network_found((char *)guihost, guiport, &wl_net))
-	      {
-		wl_logerr("Error sending data to UI: %s", strerror(errno));
-		break;
-	      }
-	      wl_loginfo("Sent network to GUI '%s:%d'", guihost, guiport);
-	    }
-	  break;	
-
-	default:
-	  wl_logerr("Unknown IEEE802.11 frame subtype (%d)", FC_SUBTYPE(fc));
-	  break;	
-	} /* End of switch over different mgt frame types */
-      
-      break;
-  
-  case T_CTRL:
-    wl_loginfo("Received control frame, not implemented yet");
-    break;
-
-  case T_DATA:
-    wl_loginfo("Received date frame, not implemented yet");
-    break;
-
-  default:
-    wl_logerr("Unknown IEEE802.11 frame type (%d)", FC_TYPE(fc));
-    break;
-    }
-}
-
-/* This decodes the 802.11b frame header out of the 802.11b packet 
-   all the infos is placed into the packetinfo structure			 */
-int decode_80211b_hdr(const u_char *p,struct packetinfo *ppinfo)
-{
-  const struct mgmt_header_t *mgthdr = (const struct mgmt_header_t *) p;
-  ppinfo->fcsubtype = FC_SUBTYPE(mgthdr->fc);
-  
-  /* Get the sender, bssid and dest mac address */
-  etheraddr_string(mgthdr->bssid,ppinfo->bssid);
-  etheraddr_string(mgthdr->da,ppinfo->desthwaddr);
-  etheraddr_string(mgthdr->sa,ppinfo->sndhwaddr);
-  ppinfo->fc_wep = FC_WEP(mgthdr->fc);
-  return 0;
-}
-
-
-void etheraddr_string(register const u_char *ep, char *text)
-{
-  static char hex[] = "0123456789abcdef";
-  register unsigned int i, j;
-  register char *cp;
-  char buf[sizeof("00:00:00:00:00:00\0")];
-  cp = buf;
-  if ((j = *ep >> 4) != 0)
-  {
-  	*cp++ = hex[j];
-  }
-  else
-  {
-  	*cp++ = '0';
-  }
-  *cp++ = hex[*ep++ & 0xf];
-  
-  for (i = 5; (int)--i >= 0;) 
-  {
-    *cp++ = ':';
-    if ((j = *ep >> 4) != 0)
-    {
-    	*cp++ = hex[j];
-    }
-    else
-    {
-    	*cp++ = '0';
-    }
-  
-    *cp++ = hex[*ep++ & 0xf];
-  }
-  *cp = '\0';
-  strcpy(text,buf);
-}
-
-/* beacon handler */
-int handle_beacon(u_int16_t fc, const u_char *p,struct packetinfo *ppinfo)
-{
-  struct mgmt_body_t pbody;
-  int offset = 0;
-  
-  /* Get the static informations out of the packet */
-  memset(&pbody, 0, sizeof(pbody));
-  memcpy(&pbody.timestamp, p, 8);
-  offset += 8;
-  pbody.beacon_interval = EXTRACT_LE_16BITS(p+offset);
-  offset += 2;
-  pbody.capability_info = EXTRACT_LE_16BITS(p+offset);
-  offset += 2;
-  
-  /* Gets the different flags out of the capabilities */
-  ppinfo->cap_ESS = CAPABILITY_ESS(pbody.capability_info);
-  ppinfo->cap_IBSS = CAPABILITY_IBSS(pbody.capability_info);
-  ppinfo->cap_WEP = CAPABILITY_PRIVACY(pbody.capability_info);
-  
-  /* Gets the tagged elements out of the packets */
-  while (offset + 1 < ppinfo->pktlen)
-  {
-      switch (*(p + offset)) 
-      {
-	case E_SSID:
-	  memcpy(&(pbody.ssid),p+offset,2); offset += 2;
-	  if (pbody.ssid.length > 0)
-	  {
-	      memcpy(&(pbody.ssid.ssid),p+offset,pbody.ssid.length); 
-	      offset += pbody.ssid.length;
-	      pbody.ssid.ssid[pbody.ssid.length]='\0';
-	      if (strcmp((char *)pbody.ssid.ssid,"")==0)
-		memcpy(ppinfo->ssid, NONBROADCASTING, sizeof(ppinfo->ssid));
-	      else
-		  memcpy(ppinfo->ssid, pbody.ssid.ssid, sizeof(ppinfo->ssid));
-	      ppinfo->ssid_len = pbody.ssid.length;
-	  }
-	  break;
-	  
-	case E_CHALLENGE:
-	  memcpy(&(pbody.challenge),p+offset,2); offset += 2;
-	  if (pbody.challenge.length > 0)
-	  {
-	      memcpy(&(pbody.challenge.text),p+offset,pbody.challenge.length); 
-	      offset += pbody.challenge.length;
-	      pbody.challenge.text[pbody.challenge.length]='\0';
-	  }
-	  break;
-	case E_RATES:
-	  memcpy(&(pbody.rates),p+offset,2); offset += 2;
-	  if (pbody.rates.length > 0) 
-	  {
-	    memcpy(&(pbody.rates.rate),p+offset,pbody.rates.length); 
-	    offset += pbody.rates.length;
-	  }
-	  break;
-	case E_DS:
-	  memcpy(&(pbody.ds),p+offset,3); 
-	  offset +=3;
-	  ppinfo->channel = pbody.ds.channel;
-	  break;
-	case E_CF:
-	  memcpy(&(pbody.cf),p+offset,8); 
-	  offset +=8;
-	  break;
-	case E_TIM:
-	  memcpy(&(pbody.tim),p+offset,2); 
-	  offset +=2;
-	  memcpy(&(pbody.tim.count),p+offset,3); 
-	  offset +=3;
-	  if ((pbody.tim.length -3) > 0)
-	  {
-	      memcpy((pbody.tim.bitmap),p+(pbody.tim.length -3),(pbody.tim.length -3));
-	      offset += pbody.tim.length -3;
-	  }
-	  break;
-	default:
-	  
-	  offset+= *(p+offset+1) + 2;
-	  break;
-	} /* end of switch*/
-    } /* end of for loop */
-  return 0;
-  
-} /* End of handle_beacon */
-
-
-int GetHeaderLength(u_int16_t fc)
-{
-  int iLength=0;
-  
-  switch (FC_TYPE(fc)) 
-  {
-    case T_MGMT:
-      iLength = MGMT_HEADER_LEN;
-      break;
-    case T_CTRL:
-      switch (FC_SUBTYPE(fc)) 
-      {
-        case CTRL_PS_POLL:
-	  iLength = CTRL_PS_POLL_LEN;
-	  break;
-        case CTRL_RTS:
-	  iLength = CTRL_RTS_LEN;
-	  break;
-        case CTRL_CTS:
-	  iLength = CTRL_CTS_LEN;
-	  break;
-        case CTRL_ACK:
-	  iLength = CTRL_ACK_LEN;
-	  break;
-        case CTRL_CF_END:
-	  iLength = CTRL_END_LEN;
-	  break;
-        case CTRL_END_ACK:
-	  iLength = CTRL_END_ACK_LEN;
-	  break;
-        default:
-	  iLength = 0;
-	  break;
-      }
-      break;
-    case T_DATA:
-      if (FC_TO_DS(fc) && FC_FROM_DS(fc))
-	iLength = 30;
-      else
-	iLength = 24;
-      break;
-    default:
-      wl_logerr("unknown IEEE802.11 frame type (%d)", FC_TYPE(fc));
-      break;
-  }
-  return iLength;
-}
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/sniff.hh b/noncore/net/wellenreiter/libwellenreiter/source/sniff.hh
deleted file mode 100644
index a4cf4b7..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/sniff.hh
+++ b/dev/null
@@ -1,73 +0,0 @@
-/* $Id$ */
-
-#ifndef SNIFF_HH
-#define SNIFF_HH
-
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-extern "C"
-{
-#include <net/bpf.h>
-#include <pcap.h>  
-}
-
-#define   NONBROADCASTING "non-broadcasting"
-
-/* holds all the interresting data */
-struct packetinfo
-{
-  int isvalid;
-  int pktlen;
-  int fctype;
-  int fcsubtype;
-  int fc_wep;
-  int cap_WEP;
-  int cap_IBSS;
-  int cap_ESS;
-  int channel;
-  char bssid[sizeof("00:00:00:00:00:00") + 1];
-  char desthwaddr[sizeof("00:00:00:00:00:00") + 1];
-  char sndhwaddr[sizeof("00:00:00:00:00:00") + 1];
-  char ssid[128];
-  int ssid_len;
-};
-
-/* Function definitions  */
-/* Used for stoping and starting the sniffer process */
-int start_sniffer(const char *device, int cardtype);
-int stop_sniffer(const char *device, int cardtype);
-void process_packets(const struct pcap_pkthdr* pkthdr,const u_char* packet, char *, int);
-int decode_80211b_hdr(const u_char *p,struct packetinfo *ppinfo);
-void etheraddr_string(register const u_char *ep,char * text);
-int handle_beacon(u_int16_t fc, const u_char *p,struct packetinfo *ppinfo);
-int GetHeaderLength(u_int16_t fc);
-
-/*
- * True if  "l" bytes of "var" were captured.
- *
- * The "snapend - (l) <= snapend" checks to make sure "l" isn't so large
- * that "snapend - (l)" underflows.
- *
- * The check is for <= rather than < because "l" might be 0.
- */
-#define TTEST2(var, l) (snapend - (l) <= snapend && \
-			(const u_char *)&(var) <= snapend - (l))
-
-/* True if "var" was captured */
-#define TTEST(var) TTEST2(var, sizeof(var))
-
-/* Bail if "l" bytes of "var" were not captured */
-#define TCHECK2(var, l) if (!TTEST2(var, l)) goto trunc
-
-/* Bail if "var" was not captured */
-#define TCHECK(var) TCHECK2(var, sizeof(var))
-
-#endif /* SNIFF_HH */
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_conf.cc b/noncore/net/wellenreiter/libwellenreiter/source/wl_conf.cc
deleted file mode 100644
index ba56754..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_conf.cc
+++ b/dev/null
@@ -1,81 +0,0 @@
-/* 
- * Configfile operations for wellenreiter
- * 
- * $Id$
- */
-
-#include "wl_conf.hh"
-#include "wl_log.hh"
-#include "wl_types.hh"
-
-/* Check whether configfile exists and is readable */
-int wl_checkcfg(void)
-{
-  FILE *wl_config;
-
-  if((wl_config = fopen(WL_CONFFILE, "r")) == NULL)
-  {
-    wl_logerr("Cannot open configfile: %s", strerror(errno));
-    return 0;
-  }
-  else
-  {
-    fclose(wl_config);
-    return 1;
-  }
-
-}
-
-/* Get value for given token from config file */
-int wl_cfgvalue(const char *token, char *out, int maxlen)
-{
-  FILE *wl_config;
-  char *ptr, *ptr2;
-  char confbuf[WL_CONFBUFF];
-
-  if(token == NULL)
-    return -1;
-
-  if((wl_config = fopen(WL_CONFFILE, "r")) == NULL)
-  {
-    wl_logerr("Cannot open configfile: %s", strerror(errno));
-    return -1;
-  }
-   
-  /* Clear buffers */
-  memset(out, 0, maxlen);
-  memset(confbuf, 0, sizeof(confbuf));
-
-  while((fgets(confbuf, sizeof(confbuf) - 1, wl_config)) != NULL)
-  {
-    
-    /* Ignore comments */
-    if(confbuf[0] == '#') continue;
- 
-    /* Search for token, if found check whether next character
-     *  is a '=' or a ' ' 
-     */
-    if(strstr(confbuf, token) != NULL &&
-       (confbuf[strlen(token)] == '=' || confbuf[strlen(token)] == ' '))
-    {
-
-      /* Get value between quotes */
-      if((ptr = strstr(confbuf, "\"")) == NULL)
-	break;
-      ++ptr;
-      if((ptr2 = strstr(ptr, "\"")) == NULL)
-	break;
-      ptr2[0] = '\0';
-
-      memcpy(out, ptr, maxlen - 1);
-      break;
-
-    }
-    memset(confbuf, 0, sizeof(confbuf));
-  }
-
-  fclose(wl_config);
-
-  return (out[0] == '\0' ? 0 : 1);
-}
-
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_conf.hh b/noncore/net/wellenreiter/libwellenreiter/source/wl_conf.hh
deleted file mode 100644
index 4061440..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_conf.hh
+++ b/dev/null
@@ -1,12 +0,0 @@
-/* $Id$ */
-
-#ifndef WLCONF_HH
-#define WLCONF_HH
-
-#include <string.h>
-#include <errno.h>
-
-int wl_checkcfg(void);
-int wl_cfgvalue(const char *, char *, int);
-
-#endif /* WLCONF_HH */
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_log.cc b/noncore/net/wellenreiter/libwellenreiter/source/wl_log.cc
deleted file mode 100644
index 7adaba8..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_log.cc
+++ b/dev/null
@@ -1,51 +0,0 @@
-/*
- * Small functions to log to syslog
- *
- * $Id$
- */
-
-#include "wl_log.hh"
-
-/* Log to syslog INFO */
-void wl_loginfo(const char *fmt,...) 
-{
-
-  char buffer[4096];
-  va_list ap;
-
-  memset(buffer, 0, sizeof(buffer));
-  va_start(ap, fmt);
-  vsnprintf(buffer, sizeof(buffer)-1, fmt, ap);
-  va_end(ap);
-  
-  openlog("libwellenreiter", LOG_PID, LOG_SYSLOG);
-  syslog(LOG_INFO, "(info) %s", buffer);
-  closelog();
-
-#ifdef DEBUG
-  fprintf(stderr, "(info) %s\n", buffer);
-#endif
-
-}
-
-/* Log to syslog ERR */
-void wl_logerr(const char *fmt,...) 
-{
-
-  char buffer[4096];
-  va_list ap;
-
-  memset(buffer, 0, sizeof(buffer));
-  va_start(ap, fmt);
-  vsnprintf(buffer, sizeof(buffer)-1, fmt, ap);
-  va_end(ap);
-
-  openlog("libwellenreiter", LOG_PID, LOG_SYSLOG);
-  syslog(LOG_INFO, "(err) %s", buffer); 	
-  closelog();
-
-#ifdef DEBUG
-  fprintf(stderr, "(err) %s\n", buffer);
-#endif        
-
-}
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_log.hh b/noncore/net/wellenreiter/libwellenreiter/source/wl_log.hh
deleted file mode 100644
index 8f6e543..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_log.hh
+++ b/dev/null
@@ -1,14 +0,0 @@
-/* $Id$ */
-
-#ifndef WLLOG_HH
-#define WLLOG_HH
-
-#include <stdio.h>
-#include <syslog.h>
-#include <stdarg.h>
-#include <string.h>
-
-void wl_loginfo(const char *, ...);
-void wl_logerr(const char *, ...);
-
-#endif /* WLLOG_HH */
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_proto.cc b/noncore/net/wellenreiter/libwellenreiter/source/wl_proto.cc
deleted file mode 100644
index 6c3846f..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_proto.cc
+++ b/dev/null
@@ -1,221 +0,0 @@
-/*
- * Communication protocol
- *
- * $Id$
- */
-
-#include "wl_types.hh"
-#include "wl_proto.hh"
-#include "wl_log.hh"
-#include "wl_sock.hh"
-
-/* Adds a field to the buffer */
-unsigned int add_field(char *buffer, const char *string, int len)
-{
-  char newlen[5];
-  
-  /* 3 Byte = Length */
-  memset(newlen, 0, sizeof(newlen));
-  snprintf(newlen, sizeof(newlen) - 1, "%.3d", len);
-  memcpy(buffer, newlen, 3);
-  
-  /* Length bytes = Value */
-  memcpy(buffer + 3, string, atoi(newlen));
-  
-  /* Return length of attached field */
-  return (atoi(newlen) + 3);
-}
-
-unsigned int get_field(const char *buffer, char *out, int maxlen)
-{
-  char len[5];
-
-  /* Get length of value */
-  memset(len, 0, sizeof(len));
-  memcpy(len, buffer, 3);
-
-  /* Copy buffer to out pointer */
-  memset(out, 0, maxlen);
-  if(atoi(len) > maxlen -1)
-    memcpy(out, buffer + 3, maxlen - 1);
-  else
-    memcpy(out, buffer + 3, atoi(len));
-
-  /* Return length of whole field (including 3 byte length) */
-  return (atoi(len) + 3);
-}
-
-/* Send ok message */
-int send_ok(const char *guihost, int guiport, int code)
-{
-  unsigned int len = 0;
-  char buffer[128], temp[5];
-
-  memset(buffer, 0, sizeof(buffer));
-
-  memset(temp, 0, sizeof(temp));
-  snprintf(temp, sizeof(temp) - 1, "%.2d", CMD_OK);
-  memcpy(buffer, temp, 2);
-  len += 2;
-
-  memset(temp, 0, sizeof(temp));
-  snprintf(temp, sizeof(temp) - 1, "%.2d", code);
-  len += add_field(buffer + len, temp, 2);
-
-  /* Send prepared buffer to UI */
-#ifdef DEBUG
-  wl_loginfo("Sent ok to UI: '%s'", buffer);
-#endif
-
-  return ((!wl_send(guihost, guiport, buffer)) ? 0 : 1);
-}
-
-/* Send fail message */
-int send_fail(const char *guihost, int guiport,
-	      int code, const char *errstr)
-{
-  unsigned int len = 0;
-  char buffer[128], temp[5];
-
-  memset(buffer, 0, sizeof(buffer));
-
-  memset(temp, 0, sizeof(temp));
-  snprintf(temp, sizeof(temp) - 1, "%.2d", CMD_FAIL);
-  memcpy(buffer, temp, 2);
-  len += 2;
-
-  memset(temp, 0, sizeof(temp));
-  snprintf(temp, sizeof(temp) - 1, "%.2d", code);
-  len += add_field(buffer + len, temp, 2);
-
-  len += add_field(buffer + len, errstr, strlen(errstr));
-
-  /* Send prepared buffer to UI */
-#ifdef DEBUG
-  wl_loginfo("Send CMD_FAIL to UI: '%s'", buffer);
-#endif
-
-  return ((!wl_send(guihost, guiport, buffer)) ? 0 : 1);
-}
-
-int get_ok(const char *buffer)
-{
-  char temp[5];
-  unsigned int len = 0;
-
-  /* packet type already determined, skip check */
-  len += 2;
-
-  /* what is ok for? */
-  memset(temp, 0, sizeof(temp));
-  len += get_field(buffer + len, temp, sizeof(temp));
-
-  return atoi(temp);
-}
-
-/* put failmessage into buffer */
-int get_fail(char *out, const char *buffer, size_t bufflen)
-{
-  char temp[5];
-  int error=0;
-  unsigned int len = 0;
-
-  /* packet type already determined, skip check */
-  len += 2;
-
-  /* what is fail for? */
-  memset(temp, 0, sizeof(temp));
-  len += get_field(buffer + len, temp, sizeof(temp));
-  error=atoi(temp);
-
-  /* get errorstring and fill into buffer */
-  memset(out, 0, bufflen);
-  len += get_field(buffer + len, out, bufflen - 1);
-
-  return error;
-}
-
-
-/* Send found network to UI */
-int send_network_found (const char *guihost, int guiport, void *structure)
-{
-  wl_network_t *ptr;
-  char buffer[2048], temp[5];
-  unsigned int len = 0;
-
-  ptr = (wl_network_t *)structure;
-
-  memset(buffer,0,sizeof(buffer));
-  /* Type = Found new net (without length field) */
-  memset(temp, 0, sizeof(temp));
-  snprintf(temp, sizeof(temp) - 1, "%.2d", WL_NETFOUND);
-  memcpy(buffer, temp, 2);
-  len += 2;
-
-  /* Set Net-type */
-  memset(temp, 0, sizeof(temp));
-  snprintf(temp, sizeof(temp) - 1, "%d", ptr->net_type);
-  len += add_field(buffer + len, temp, 1);
-
-  /* Set channel */
-  memset(temp, 0, sizeof(temp));
-  snprintf(temp, sizeof(temp) - 1, "%.2d", ptr->channel);
-  len += add_field(buffer + len, temp, 2); 
-
-  /* Set WEP y/n */
-  memset(temp, 0, sizeof(temp));
-  snprintf(temp, sizeof(temp) - 1, "%d", ptr->wep);
-  len += add_field(buffer + len, temp, 1);
-
-  /* Set Mac */
-  len += add_field(buffer + len, ptr->mac, 17);
-
-  /* Set ssid */
-  if(len + ptr->ssid_len < sizeof(buffer) - 1)
-    len += add_field(buffer + len, ptr->bssid, ptr->ssid_len);
-  else
-    len += add_field(buffer + len, ptr->bssid, sizeof(buffer) - len - 1);
-
-  /* Send prepared buffer to UI */
-#ifdef DEBUG
-  wl_loginfo("Sending network to UI: '%s'", buffer);
-#endif
-
-  return ((!wl_send(guihost, guiport, buffer)) ? 0 : 1);
-}
-
-/* Fill buffer into structur */
-int get_network_found (void *structure, const char *buffer)
-{
-  wl_network_t *ptr;
-  char temp[5];
-  unsigned int len = 0;
-
-  ptr = (wl_network_t *)structure;
-
-  /* packet type already determined, skip check */
-  len += 2;
-
-  /* Get net type (accesspoint || ad-hoc || ...) */
-  memset(temp, 0, sizeof(temp));
-  len += get_field(buffer + len, temp, sizeof(temp));
-  ptr->net_type = atoi(temp); 
-   
-  /* Get channel */
-  memset(temp, 0, sizeof(temp));
-  len += get_field(buffer + len, temp, sizeof(temp));
-  ptr->channel = atoi(temp);
-
-  /* Set WEP y/n */
-  memset(temp, 0, sizeof(temp));
-  len += get_field(buffer + len, temp, sizeof(temp));
-  ptr->wep = atoi(temp);
-
-  /* Set MAC address */
-  len += get_field(buffer + len, ptr->mac, sizeof(ptr->mac));
-
-  /* Set BSSID */
-  len += get_field(buffer + len, ptr->bssid, sizeof(ptr->bssid));
-
-  return 1;
-}
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_proto.hh b/noncore/net/wellenreiter/libwellenreiter/source/wl_proto.hh
deleted file mode 100644
index 63ac53b..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_proto.hh
+++ b/dev/null
@@ -1,27 +0,0 @@
-/* $Id$ */
-
-#ifndef WLPROTO_HH
-#define WLPROTO_HH
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-/* Type definitions, to be continued */
-#define NETFOUND  01
-#define NETLOST   02
-#define CMD_FAIL  50
-#define CMD_OK    51
-#define STARTSNIFF 98
-#define STOPSNIFF  99
-
-unsigned int add_field(char *, const char *, int);
-unsigned int get_field(const char *, char *, int);
-int send_ok(const char *, int, int);
-int get_ok(const char *);
-int send_fail(const char *, int, int, const char *);
-int get_fail(char *, const char *, size_t);
-int send_network_found (const char *, int, void *);
-int get_network_found (void *, const char *);
-
-#endif /* WLPROTO_HH */
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_sock.cc b/noncore/net/wellenreiter/libwellenreiter/source/wl_sock.cc
deleted file mode 100644
index 6e26cb8..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_sock.cc
+++ b/dev/null
@@ -1,92 +0,0 @@
-/*
- * Socket operations for wellenreiter
- *
- * $Id$
- */
-
-#include "wl_sock.hh"
-#include "wl_log.hh"
-
-/* Setup UDP Socket for incoming commands */
-int wl_setupsock(const char *host, int port, struct sockaddr_in saddr)
-{
-  int sock;
-
-  if((sock = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
-  {
-    wl_logerr("Cannot set up socket: %s", strerror(errno));
-    return -1;
-  }
-
-  memset(&saddr, 0, sizeof(saddr));
-  saddr.sin_family = PF_INET;
-  saddr.sin_port = htons(port);
-  saddr.sin_addr.s_addr = inet_addr(host);
-
-  if(bind(sock,(struct sockaddr *)&saddr, sizeof(saddr)) < 0)
-  {
-    wl_logerr("Cannot bind socket: %s", strerror(errno));
-    close(sock);
-    return -1;
-  }
-
-  return sock;
-}
-
-/* Send a string to commsock */
-int wl_send(const char *host, int port, const char *string, ...) 
-{
-  int sock;
-  char buffer[4096];
-  struct sockaddr_in saddr;
-  va_list ap;
-
-  /* Generate string */
-  memset(buffer, 0, sizeof(buffer));
-  va_start(ap, string);
-  vsnprintf(buffer, sizeof(buffer)-1, string, ap);
-  va_end(ap);
-
-  saddr.sin_family = AF_INET;
-  saddr.sin_port = htons(port);
-  saddr.sin_addr.s_addr = inet_addr(host);
-
-  /* Setup socket */
-  if((sock = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
-  {
-    wl_logerr("Cannot set up socket: %s", strerror(errno));
-    return 0;
-  }
-
-  if(sendto(sock, buffer, sizeof(buffer), 0, (struct sockaddr *)&saddr, sizeof(saddr)) < 0)
-  {
-    wl_logerr("Cannot write to socket: %s", strerror(errno));
-    close(sock);
-    return 0;
-  }
-
-  if(close(sock) < 0)
-    wl_logerr("Cannot close socket: %s", strerror(errno));
-
-  return 1;
-}
-
-/* Check for new messages on commsock */
-int wl_recv(int *sock, struct sockaddr_in cliaddr, char *out, int maxlen)
-{
-  socklen_t len = sizeof(struct sockaddr);
-  char retval[3];
- 
-  memset(out, 0, maxlen);
-  if(recvfrom(*sock, out, maxlen - 1, 0, (struct sockaddr *)&cliaddr, &len) < 0)
-  {
-    wl_logerr("Cannot receive from socket: %s", strerror(errno));
-    return -1;
-  }
-
-  /* Get packet type and return it */
-  memset(retval, 0, sizeof(retval));
-  memcpy(retval, out, 2);
-
-  return atoi(retval);
-}
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_sock.hh b/noncore/net/wellenreiter/libwellenreiter/source/wl_sock.hh
deleted file mode 100644
index e7d9747..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_sock.hh
+++ b/dev/null
@@ -1,21 +0,0 @@
-/* $Id */
-
-#ifndef WLSOCK_HH
-#define WLSOCK_HH
-
-#include <stdarg.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <signal.h>
-#include <string.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <errno.h>
-
-int wl_setupsock(const char *, int, struct sockaddr_in);
-int wl_send(const char *, int, const char *, ...);
-int wl_recv(int *, struct sockaddr_in, char *, int);
-
-#endif /* WLSOCK_HH */
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_types.hh b/noncore/net/wellenreiter/libwellenreiter/source/wl_types.hh
deleted file mode 100644
index afc105c..0000000
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_types.hh
+++ b/dev/null
@@ -1,43 +0,0 @@
-/* 
- * Global bufffer size and type definitions
- *
- * $Id$
- *
- */
-
-#ifndef WL_TYPES_HH
-#define WL_TYPES_HH
-
-/* Type definitions, to be continued */
-#define WL_NETFOUND 01
-#define WL_NETLOST  02
-#define WL_STARTSNIFF 98
-#define WL_STOPSNIFF  99
-
-/* Socket specific */
-#define WL_SOCKBUF 512 /* Buffer for wl_send and wl_recv calls */
-
-/* Channelswitching */
-typedef struct {
-  int type;        /* Type of card (chip) */
-  char iface[6];   /* Interface of card   */
-} wl_cardtype_t;
-
-
-/* WL network structure */
-typedef struct {
-  int net_type;    /* 1 = Accesspoint ; 2 = Ad-Hoc   */
-  int ssid_len;    /* Length of SSID                 */
-  int channel;     /* Channel                        */
-  int wep;         /* 1 = WEP enabled ; 0 = disabled */
-  char mac[64];    /* MAC address of Accesspoint     */
-  char bssid[128]; /* BSSID of Net                   */
-} wl_network_t;
-
-/* Config specific */
-#define WL_CONFFILE "sample.conf"
-#define WL_CONFBUFF 128
-
-
-#endif /* WL_TYPES_HH */
-
diff --git a/noncore/net/wellenreiter/opie-wellenreiter.control b/noncore/net/wellenreiter/opie-wellenreiter.control
index 4414341..ca50207 100644
--- a/noncore/net/wellenreiter/opie-wellenreiter.control
+++ b/noncore/net/wellenreiter/opie-wellenreiter.control
@@ -1,9 +1,9 @@
-Files: bin/wellenreiter bin/wellenreiterd share/wellenreiter pics/wellenreiter apps/Applications/wellenreiter.desktop $OPIEDIR/lib/libwellenreiter.* $OPIEDIR/lib/libcornucopia.*
+Files: bin/wellenreiter share/wellenreiter pics/wellenreiter apps/Applications/wellenreiter.desktop
 Priority: optional
 Section: opie/applications
 Maintainer: Michael 'Mickey' Lauer <mickeyl@handhelds.org> 
 Architecture: arm
 Version: $QPE_VERSION-$SUB_VERSION
-Depends: opie-base, libpcap0
+Depends: opie-base, libpcap0, libopie2 (1.8.1)
 Description: A WaveLAN Network Monitor
  A WaveLAN Network Monitor/Sniffer for the Opie Environment.
diff --git a/noncore/net/wellenreiter/wellenreiter.pro b/noncore/net/wellenreiter/wellenreiter.pro
index 1d76564..d473695 100644
--- a/noncore/net/wellenreiter/wellenreiter.pro
+++ b/noncore/net/wellenreiter/wellenreiter.pro
@@ -1,14 +1,14 @@
 TEMPLATE        = subdirs
-unix:SUBDIRS    = cornucopia libwellenreiter daemon gui
+unix:SUBDIRS    = gui
 
 
 !contains( platform, x11 ) {
   message( Configuring Wellenreiter for build on Opie )
   include ( $(OPIEDIR)/include.pro )
 }
 
 contains( platform, x11 ) {
   message( Configuring Wellenreiter for build on Qt/X11 )
   system( mkdir -p $OPIEDIR/lib $OPIEDIR/bin $OPIEDIR/share/pics )
 }