correct simpad cs3 readout

1 files changed, 1 insertions, 1 deletions

diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp
index 2e54216..d6c2c80 100644
--- a/libopie2/opiecore/device/odevice_simpad.cpp
+++ b/libopie2/opiecore/device/odevice_simpad.cpp
@@ -169,129 +169,129 @@ void SIMpad::initButtons()
         ODeviceButton b;
 
         if (( sb->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( sb->code );
             b. setUserText ( QObject::tr ( "Button", sb->utext ));
             b. setPixmap ( Resource::loadPixmap ( sb->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/backlight"
 
 
 /*
  * The SIMpad exposes ChipSelect3 to userspace
  * via a proc filesystem file. Using this register
  * one can toggle power of serial, irda, dect circuits
  * change the video driver and display status and
  * many more things.
  * To not lose the current setting we read the current
  * cs3 setting and toggle the necessary bits and then
  * write it.
  */
 static bool setCS3Bit(  bool bitset, int bit ) {
     QFile file( SIMPAD_BOARDCONTROL );
     if ( !file.open( IO_ReadOnly ) )
         return false;
 
     unsigned int val = 0;
     bool ok = false;
     QTextStream stream( &file );
 
     /*
      * Use QFile and QTextStream for parsing to be more
      * robust
      */
     while ( !stream.atEnd() ) {
         QString line = stream.readLine();
         if ( line.startsWith( "Chipselect3 : " ) ) {
-            val = line.mid( 15 ).toUInt( 0, 16 );
+            val = line.mid( 14 ).toUInt( 0, 16 );
             ok = true;
             break;
         }
     }
 
     if ( !ok )
         return false;
 
     file.close();
 
     /*
      * change the value
      */
     val = bitset ? (val | bit) : (val & ~bit);
 
     /*
      * write it back
      */
     int cs3_fd = ::open( SIMPAD_BOARDCONTROL, O_WRONLY );
     if ( cs3_fd < 0 )
         return false;
 
     char line[32];
     ::snprintf(line, sizeof(line), "0x%04x\n", val);
     ::write(cs3_fd, line, strlen(line));
     ::close(cs3_fd);
 
     return true;
 }
 
 
 QValueList <OLed> SIMpad::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
     //vl << Led_Mail; //TODO find out if LED1 is accessible anyway
     return vl;
 }
 
 QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Power )  //FIXME which LED is LED2 ? The green one or the amber one?
         vl << Led_Off << Led_On;
     //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
         //vl << Led_Off;
     return vl;
 }
 
 OLedState SIMpad::ledState ( OLed l ) const
 {
     switch ( l ) {
         case Led_Power:
             return m_leds [0];
         //case Led_Mail:
         //  return m_leds [1];
         default:
             return Led_Off;
     }
 }
 
 bool SIMpad::setLedState ( OLed l, OLedState st )
 {