Fixed warnings

Now we're down to two warning with number conversions
Enable Saving Sessions
Enable Copy and Paste

15 files changed, 121 insertions, 29 deletions

diff --git a/noncore/apps/opie-console/MyPty.cpp b/noncore/apps/opie-console/MyPty.cpp
index 16bb5ff..984e347 100644
--- a/noncore/apps/opie-console/MyPty.cpp
+++ b/noncore/apps/opie-console/MyPty.cpp
@@ -17,326 +17,326 @@
 
 /* If you're compiling konsole on non-Linux platforms and find
    problems that you can track down to this file, please have
    a look into ../README.ports, too.
 */
 
 /*! \file
 */
 
 /*! \class TEPty
 
     \brief Ptys provide a pseudo terminal connection to a program.
 
     Although closely related to pipes, these pseudo terminal connections have
     some ability, that makes it nessesary to uses them. Most importent, they
     know about changing screen sizes and UNIX job control.
 
     Within the terminal emulation framework, this class represents the
     host side of the terminal together with the connecting serial line.
 
     One can create many instances of this class within a program.
     As a side effect of using this class, a signal(2) handler is
     installed on SIGCHLD.
 
     \par FIXME
 
     [NOTE: much of the technical stuff below will be replaced by forkpty.]
 
     publish the SIGCHLD signal if not related to an instance.
 
     clearify TEPty::done vs. TEPty::~TEPty semantics.
     check if pty is restartable via run after done.
 
     \par Pseudo terminals
 
     Pseudo terminals are a unique feature of UNIX, and always come in form of
     pairs of devices (/dev/ptyXX and /dev/ttyXX), which are connected to each
     other by the operating system. One may think of them as two serial devices
     linked by a null-modem cable. Being based on devices the number of
     simultanous instances of this class is (globally) limited by the number of
     those device pairs, which is 256.
 
     Another technic are UNIX 98 PTY's. These are supported also, and prefered
     over the (obsolete) predecessor.
 
     There's a sinister ioctl(2), signal(2) and job control stuff
     nessesary to make everything work as it should.
 */
 
 
 #include <qapplication.h>
 #include <qsocketnotifier.h>
 #include <qstring.h>
 
 #include <stdlib.h>
 #include <stdio.h>
 #include <signal.h>
 #include <fcntl.h>
 #include <unistd.h>
 #include <termios.h>
 #include <sys/types.h>
 #include <sys/ioctl.h>
 #include <sys/wait.h>
 
 #ifdef HAVE_OPENPTY
 #include <pty.h>
 #endif
 
 #include "procctl.h"
 #include "MyPty.h"
 
 
 #undef VERBOSE_DEBUG
 
 
 /* -------------------------------------------------------------------------- */
 
 /*!
    Informs the client program about the
    actual size of the window.
 */
 
 void MyPty::setSize(int lines, int columns)
 {
     qWarning("setting size");
   struct winsize wsize;
   wsize.ws_row = (unsigned short)lines;
   wsize.ws_col = (unsigned short)columns;
   if(m_fd < 0) return;
   ioctl(m_fd,TIOCSWINSZ,(char *)&wsize);
 }
 
 
 void MyPty::donePty()
 {
     // This is code from the Qt DumbTerminal example
-    int status = 0;
 
     ::close(m_fd);
 
     if (m_cpid) {
 	kill(m_cpid, SIGHUP);
 	//waitpid(m_cpid, &status, 0);
         delete m_sn_e;
         delete m_sn_r;
         m_sn_e = 0l;
         m_sn_r = 0l;
     }
 
     m_cpid = 0;
     m_fd = -1;
 //    emit done(status);
 }
 
 
 const char* MyPty::deviceName()
 {
     return m_ttynam;
 }
 
 
 void MyPty::error()
 {
     // This is code from the Qt DumbTerminal example
     donePty();
 }
 
 void MyPty::start() {
     char* cmd = "/bin/sh";
     QStrList lis;
     int r =run(cmd, lis, 0, 0);
     r = r;
 }
 /*!
     start the client program.
 */
 int MyPty::run(const char* cmd, QStrList &, const char*, int)
 {
     // This is code from the Qt DumbTerminal example
     m_cpid = fork();
 
     if ( !m_cpid ) {
 	// child - exec shell on tty
 	for (int sig = 1; sig < NSIG; sig++) signal(sig,SIG_DFL);
 	int ttyfd = ::open(m_ttynam, O_RDWR);
 	dup2(ttyfd, STDIN_FILENO);
 	dup2(ttyfd, STDOUT_FILENO);
 	dup2(ttyfd, STDERR_FILENO);
 	// should be done with tty, so close it
 	::close(ttyfd);
 	static struct termios ttmode;
 	if ( setsid() < 0 )
 	    perror( "failed to set process group" );
 #if defined (TIOCSCTTY)
 	// grabbed from APUE by Stevens
 	ioctl(STDIN_FILENO, TIOCSCTTY, 0);
 #endif
 	tcgetattr( STDIN_FILENO, &ttmode );
 	ttmode.c_cc[VINTR] = 3;
 	ttmode.c_cc[VERASE] = 8;
 	tcsetattr( STDIN_FILENO, TCSANOW, &ttmode );
 	setenv("TERM",m_term,1);
 	setenv("COLORTERM","0",1);
 
 	if (getuid() == 0) {
 	    char msg[] = "WARNING: You are running this shell as root!\n";
 	    write(ttyfd, msg, sizeof(msg));
 	}
 	execl(cmd, cmd, 0);
 
 	donePty();
 	exit(-1);
     }
 
     // parent - continue as a widget
     delete m_sn_r;
     m_sn_r = new QSocketNotifier(m_fd,QSocketNotifier::Read,this);
     delete m_sn_e;
     m_sn_e = new QSocketNotifier(m_fd,QSocketNotifier::Exception,this);
     connect(m_sn_r,SIGNAL(activated(int)),this,SLOT(readPty()));
     connect(m_sn_e,SIGNAL(activated(int)),this,SLOT(error()));
 
     return 0;
 }
 
 int MyPty::openPty()
 {
     // This is code from the Qt DumbTerminal example
     int ptyfd = -1;
 
 #ifdef HAVE_OPENPTY
     int ttyfd;
     if ( openpty(&ptyfd,&ttyfd,ttynam,0,0) )
 	ptyfd = -1;
     else
 	close(ttyfd); // we open the ttynam ourselves.
 #else
     for (const char* c0 = "pqrstuvwxyzabcde"; ptyfd < 0 && *c0 != 0; c0++) {
 	for (const char* c1 = "0123456789abcdef"; ptyfd < 0 && *c1 != 0; c1++) {
 	    sprintf(m_ptynam,"/dev/pty%c%c",*c0,*c1);
 	    sprintf(m_ttynam,"/dev/tty%c%c",*c0,*c1);
 	    if ((ptyfd = ::open(m_ptynam,O_RDWR)) >= 0) {
 		if (geteuid() != 0 && !access(m_ttynam,R_OK|W_OK) == 0) {
 		    ::close(ptyfd);
 		    ptyfd = -1;
 		}
 	    }
 	}
     }
 #endif
 
     if ( ptyfd < 0 ) {
 //	qApp->exit(1);
 	return -1;
     }
 
     return ptyfd;
 }
 
 /*!
     Create an instance.
 */
 MyPty::MyPty(const Profile& prof) : m_cpid(0)
 {
 
     int term = prof.readNumEntry("Terminal", Profile::VT100 );
     switch( term ) {
     default:
     case Profile::VT100:
     case Profile::VT102:
         m_term = "vt100";
         break;
     case Profile::Linux:
         m_term = "linux";
         break;
     case Profile::XTerm:
         m_term = "xterm";
         break;
     }
     m_sn_e = 0l;
     m_sn_r = 0l;
   m_fd = openPty();
   ProcCtl* ctl = ProcCtl::self();
+  Q_UNUSED(ctl);
 }
 
 /*!
     Destructor.
     Note that the related client program is not killed
     (yet) when a instance is deleted.
 */
 MyPty::~MyPty()
 {
     donePty();
 }
 QString MyPty::identifier()const {
     return QString::fromLatin1("term");
 }
 QString MyPty::name()const{
     return identifier();
 }
 bool MyPty::open() {
     if (m_fd < 0)
         m_fd = openPty();
 
     start();
     return true;
 }
 void MyPty::close() {
     donePty();
     m_fd = openPty();
 }
 void MyPty::reload( const Profile& ) {
 
 }
 /*! sends len bytes through the line */
 void MyPty::send(const QByteArray& ar)
 {
 #ifdef VERBOSE_DEBUG
   // verbose debug
   printf("sending bytes:\n");
   for (uint i = 0; i < ar.count(); i++)
     printf("%c", ar[i]);
   printf("\n");
 #endif
 
   ::write(m_fd, ar.data(), ar.count());
 }
 
 /*! indicates that a block of data is received */
 void MyPty::readPty()
 {
   QByteArray buf(4096);
 
   int len = ::read( m_fd, buf.data(), 4096 );
 
   if (len == -1 || len == 0) {
      donePty();
      return;
   }
 
   if (len < 0)
      return;
 
 
   buf.resize(len);
   emit received(buf);
 
 #ifdef VERBOSE_DEBUG
   // verbose debug
   printf("read bytes:\n");
   for (uint i = 0; i < buf.count(); i++)
     printf("%c", buf[i]);
   printf("\n");
 #endif
 
 }
 QBitArray MyPty::supports()const {
     QBitArray ar(3);
     //autoconnect
     ar[0] = 1;
     //
     ar[1] = 0;
     ar[2] = 0;
 
     return ar;
 }
diff --git a/noncore/apps/opie-console/TEWidget.cpp b/noncore/apps/opie-console/TEWidget.cpp
index f3f462f..e4415dc 100644
--- a/noncore/apps/opie-console/TEWidget.cpp
+++ b/noncore/apps/opie-console/TEWidget.cpp
@@ -2,192 +2,217 @@
 /*                                                                          */
 /* [TEWidget.C]            Terminal Emulation Widget                        */
 /*                                                                          */
 /* ------------------------------------------------------------------------ */
 /*                                                                          */
 /* Copyright (c) 1997,1998 by Lars Doelle <lars.doelle@on-line.de>          */
 /*                                                                          */
 /* This file is part of Konsole - an X terminal for KDE                     */
 /*                                                                          */
 /* ------------------------------------------------------------------------ */
 /*                        */
 /* Ported Konsole to Qt/Embedded                                              */
 /*                        */
 /* Copyright (C) 2000 by John Ryland <jryland@trolltech.com>                  */
 /*                        */
 /* -------------------------------------------------------------------------- */
 /*! \class TEWidget
 
     \brief Visible screen contents
 
    This class is responsible to map the `image' of a terminal emulation to the
    display. All the dependency of the emulation to a specific GUI or toolkit is
    localized here. Further, this widget has no knowledge about being part of an
    emulation, it simply work within the terminal emulation framework by exposing
    size and key events and by being ordered to show a new image.
 
    <ul>
    <li> The internal image has the size of the widget (evtl. rounded up)
    <li> The external image used in setImage can have any size.
    <li> (internally) the external image is simply copied to the internal
         when a setImage happens. During a resizeEvent no painting is done
         a paintEvent is expected to follow anyway.
    </ul>
 
    \sa TEScreen \sa Emulation
 */
 
 /* FIXME:
    - 'image' may also be used uninitialized (it isn't in fact) in resizeEvent
    - 'font_a' not used in mouse events
    - add destructor
 */
 
 /* TODO
    - evtl. be sensitive to `paletteChange' while using default colors.
    - set different 'rounding' styles? I.e. have a mode to show clipped chars?
 */
 
 // #include "config.h"
 #include "TEWidget.h"
 #include "session.h"
 #include <qpe/config.h>
 
 #include <qapplication.h>
 #include <qcursor.h>
 #include <qregexp.h>
 #include <qpainter.h>
 #include <qclipboard.h>
 #include <qstyle.h>
 #include <qfile.h>
 #include <qdragobject.h>
 #include <qvbox.h>
 
 #include <stdio.h>
 #include <stdlib.h>
 #include <unistd.h>
 #include <ctype.h>
 #include <sys/stat.h>
 #include <sys/types.h>
 #include <signal.h>
 
 #include <assert.h>
 
 
 
 // #include "TEWidget.moc"
 //#include <kapp.h>
 //#include <kcursor.h>
 //#include <kurl.h>
 //#include <kdebug.h>
 //#include <klocale.h>
 
 #define HERE printf("%s(%d): %s\n",__FILE__,__LINE__,__FUNCTION__)
 #define HCNT(Name) // { static int cnt = 1; printf("%s(%d): %s %d\n",__FILE__,__LINE__,Name,cnt++); }
 
 #define loc(X,Y) ((Y)*columns+(X))
 
 //FIXME: the rim should normally be 1, 0 only when running in full screen mode.
 #define rimX 0      // left/right rim width
 #define rimY 0      // top/bottom rim high
 
 #define SCRWIDTH 16 // width of the scrollbar
 
 #define yMouseScroll 1
 // scroll increment used when dragging selection at top/bottom of window.
 
+/* Button XPM */
+namespace {
+static char * menu_xpm[] = {
+"12 12 5 1",
+" 	c None",
+".	c #000000",
+"+	c #FFFDAD",
+"@	c #FFFF00",
+"#	c #E5E100",
+"            ",
+"            ",
+"  ......... ",
+"  .+++++++. ",
+"  .+@@@@#.  ",
+"  .+@@@#.   ",
+"  .+@@#.    ",
+"  .+@#.     ",
+"  .+#.      ",
+"  .+.       ",
+"  ..        ",
+"            "};
+
+}
+
+
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                Colors                                     */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 //FIXME: the default color table is in session.C now.
 //       We need a way to get rid of this one, here.
 static const ColorEntry base_color_table[TABLE_COLORS] =
 // The following are almost IBM standard color codes, with some slight
 // gamma correction for the dim colors to compensate for bright X screens.
 // It contains the 8 ansiterm/xterm colors in 2 intensities.
 {
   // Fixme: could add faint colors here, also.
   // normal
   ColorEntry(QColor(0x00,0x00,0x00), 0, 0 ), ColorEntry( QColor(0xB2,0xB2,0xB2), 1, 0 ), // Dfore, Dback
   ColorEntry(QColor(0x00,0x00,0x00), 0, 0 ), ColorEntry( QColor(0xB2,0x18,0x18), 0, 0 ), // Black, Red
   ColorEntry(QColor(0x18,0xB2,0x18), 0, 0 ), ColorEntry( QColor(0xB2,0x68,0x18), 0, 0 ), // Green, Yellow
   ColorEntry(QColor(0x18,0x18,0xB2), 0, 0 ), ColorEntry( QColor(0xB2,0x18,0xB2), 0, 0 ), // Blue,  Magenta
   ColorEntry(QColor(0x18,0xB2,0xB2), 0, 0 ), ColorEntry( QColor(0xB2,0xB2,0xB2), 0, 0 ), // Cyan,  White
   // intensiv
   ColorEntry(QColor(0x00,0x00,0x00), 0, 1 ), ColorEntry( QColor(0xFF,0xFF,0xFF), 1, 0 ),
   ColorEntry(QColor(0x68,0x68,0x68), 0, 0 ), ColorEntry( QColor(0xFF,0x54,0x54), 0, 0 ),
   ColorEntry(QColor(0x54,0xFF,0x54), 0, 0 ), ColorEntry( QColor(0xFF,0xFF,0x54), 0, 0 ),
   ColorEntry(QColor(0x54,0x54,0xFF), 0, 0 ), ColorEntry( QColor(0xB2,0x18,0xB2), 0, 0 ),
   ColorEntry(QColor(0x54,0xFF,0xFF), 0, 0 ), ColorEntry( QColor(0xFF,0xFF,0xFF), 0, 0 )
 };
 
 /* Note that we use ANSI color order (bgr), while IBMPC color order is (rgb)
 
    Code        0       1       2       3       4       5       6       7
    ----------- ------- ------- ------- ------- ------- ------- ------- -------
    ANSI  (bgr) Black   Red     Green   Yellow  Blue    Magenta Cyan    White
    IBMPC (rgb) Black   Blue    Green   Cyan    Red     Magenta Yellow  White
 */
 
 QColor TEWidget::getDefaultBackColor()
 {
   return color_table[DEFAULT_BACK_COLOR].color;
 }
 
 const ColorEntry* TEWidget::getColorTable() const
 {
   return color_table;
 }
 
 const ColorEntry* TEWidget::getdefaultColorTable() const
 {
   return base_color_table;
 }
 
 
 const QPixmap *TEWidget::backgroundPixmap()
 {
   static QPixmap *bg = new QPixmap("~/qpim/main/pics/faded_bg.xpm");
   const QPixmap *pm = bg;
   return pm;
 }
 
 void TEWidget::setColorTable(const ColorEntry table[])
 {
   for (int i = 0; i < TABLE_COLORS; i++) color_table[i] = table[i];
 
   const QPixmap* pm = backgroundPixmap();
   if (!pm) setBackgroundColor(color_table[DEFAULT_BACK_COLOR].color);
   update();
 }
 
 //FIXME: add backgroundPixmapChanged.
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                   Font                                    */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 /*
    The VT100 has 32 special graphical characters. The usual vt100 extended
    xterm fonts have these at 0x00..0x1f.
 
    QT's iso mapping leaves 0x00..0x7f without any changes. But the graphicals
    come in here as proper unicode characters.
 
    We treat non-iso10646 fonts as VT100 extended and do the requiered mapping
    from unicode to 0x00..0x1f. The remaining translation is then left to the
    QCodec.
 */
 
 // assert for i in [0..31] : vt100extended(vt100_graphics[i]) == i.
 
 unsigned short vt100_graphics[32] =
 { // 0/8     1/9    2/10    3/11    4/12    5/13    6/14    7/15
   0x0020, 0x25C6, 0x2592, 0x2409, 0x240c, 0x240d, 0x240a, 0x00b0,
   0x00b1, 0x2424, 0x240b, 0x2518, 0x2510, 0x250c, 0x2514, 0x253c,
   0xF800, 0xF801, 0x2500, 0xF803, 0xF804, 0x251c, 0x2524, 0x2534,
   0x252c, 0x2502, 0x2264, 0x2265, 0x03C0, 0x2260, 0x00A3, 0x00b7
@@ -1148,131 +1173,131 @@ void TEWidget::makeImage()
 //FIXME: rename 'calcGeometry?
 {
   calcGeometry();
   image = (ca*) malloc(lines*columns*sizeof(ca));
   clearImage();
 }
 
 // calculate the needed size
 QSize TEWidget::calcSize(int cols, int lins) const
 {
   int frw = width() - contentsRect().width();
   int frh = height() - contentsRect().height();
   int scw = (scrollLoc==SCRNONE?0:scrollbar->width());
   return QSize( font_w*cols + 2*rimX + frw + scw, font_h*lins + 2*rimY + frh );
 }
 
 QSize TEWidget::sizeHint() const
 {
    return size();
 }
 
 void TEWidget::styleChange(QStyle &)
 {
     propagateSize();
 }
 
 #ifndef QT_NO_DRAGANDDROP
 
 /* --------------------------------------------------------------------- */
 /*                                                                       */
 /* Drag & Drop                                                           */
 /*                                                                       */
 /* --------------------------------------------------------------------- */
 
 
 void TEWidget::dragEnterEvent(QDragEnterEvent* e)
 {
   e->accept(QTextDrag::canDecode(e) ||
       QUriDrag::canDecode(e));
 }
 
 void TEWidget::dropEvent(QDropEvent* event)
 {
     // The current behaviour when url(s) are dropped is
     // * if there is only ONE url and if it's a LOCAL one, ask for paste or cd
     // * in all other cases, just paste
     //   (for non-local ones, or for a list of URLs, 'cd' is nonsense)
   QStrList strlist;
   int file_count = 0;
   dropText = "";
   bool bPopup = true;
 
   if(QUriDrag::decode(event, strlist)) {
     if (strlist.count()) {
       for(const char* p = strlist.first(); p; p = strlist.next()) {
         if(file_count++ > 0) {
           dropText += " ";
           bPopup = false; // more than one file, don't popup
         }
 
 /*
         KURL url(p);
         if (url.isLocalFile()) {
           dropText += url.path(); // local URL : remove protocol
         }
         else {
           dropText += url.prettyURL();
           bPopup = false; // a non-local file, don't popup
         }
 */
 
       }
 
       if (bPopup)
         // m_drop->popup(pos() + event->pos());
   m_drop->popup(mapToGlobal(event->pos()));
       else
   {
     if (currentSession) {
       currentSession->getEmulation()->sendString(dropText.local8Bit());
     }
 //    kdDebug() << "Drop:" << dropText.local8Bit() << "\n";
   }
     }
   }
   else if(QTextDrag::decode(event, dropText)) {
 //    kdDebug() << "Drop:" << dropText.local8Bit() << "\n";
     if (currentSession) {
       currentSession->getEmulation()->sendString(dropText.local8Bit());
     }
     // Paste it
   }
 }
 #endif
 
 
-void TEWidget::drop_menu_activated(int item)
+void TEWidget::drop_menu_activated(int)
 {
 #ifndef QT_NO_DRAGANDDROP
   switch (item)
   {
     case 0: // paste
       currentSession->getEmulation()->sendString(dropText.local8Bit());
 //    KWM::activate((Window)this->winId());
       break;
     case 1: // cd ...
       currentSession->getEmulation()->sendString("cd ");
       struct stat statbuf;
       if ( ::stat( QFile::encodeName( dropText ), &statbuf ) == 0 )
       {
         if ( !S_ISDIR(statbuf.st_mode) )
         {
 /*
           KURL url;
           url.setPath( dropText );
           dropText = url.directory( true, false ); // remove filename
 */
         }
       }
       dropText.replace(QRegExp(" "), "\\ "); // escape spaces
       currentSession->getEmulation()->sendString(dropText.local8Bit());
       currentSession->getEmulation()->sendString("\n");
 //    KWM::activate((Window)this->winId());
       break;
   }
 #endif
 }
 
 QPushButton* TEWidget::cornerButton() {
     return m_cornerButton;
 }
diff --git a/noncore/apps/opie-console/TEWidget.h b/noncore/apps/opie-console/TEWidget.h
index 1b5300f..f03a16e 100644
--- a/noncore/apps/opie-console/TEWidget.h
+++ b/noncore/apps/opie-console/TEWidget.h
@@ -1,151 +1,133 @@
 /* ----------------------------------------------------------------------- */
 /*                                                                         */
 /* [te_widget.h]           Terminal Emulation Widget                       */
 /*                                                                         */
 /* ----------------------------------------------------------------------- */
 /*                                                                         */
 /* Copyright (c) 1997,1998 by Lars Doelle <lars.doelle@on-line.de>         */
 /*                                                                         */
 /* This file is part of Konsole - an X terminal for KDE                    */
 /*                                                                         */
 /* ----------------------------------------------------------------------- */
 /*                        */
 /* Ported Konsole to Qt/Embedded                                              */
 /*                        */
 /* Copyright (C) 2000 by John Ryland <jryland@trolltech.com>                  */
 /*                        */
 /* -------------------------------------------------------------------------- */
 #ifndef TE_WIDGET_H
 #define TE_WIDGET_H
 
 #include <qwidget.h>
 #include <qlabel.h>
 #include <qtimer.h>
 #include <qcolor.h>
 #include <qkeycode.h>
 #include <qscrollbar.h>
 
 #include <qpopupmenu.h>
 #include <qpushbutton.h>
 
 #include "TECommon.h"
 
 extern unsigned short vt100_graphics[32];
 
 
 
-static char * menu_xpm[] = {
-"12 12 5 1",
-" 	c None",
-".	c #000000",
-"+	c #FFFDAD",
-"@	c #FFFF00",
-"#	c #E5E100",
-"            ",
-"            ",
-"  ......... ",
-"  .+++++++. ",
-"  .+@@@@#.  ",
-"  .+@@@#.   ",
-"  .+@@#.    ",
-"  .+@#.     ",
-"  .+#.      ",
-"  .+.       ",
-"  ..        ",
-"            "};
+
 
 class TESession;
 
 // class Konsole;
 
 class TEWidget : public QFrame
 // a widget representing attributed text
 {
     Q_OBJECT
 
 //  friend class Konsole;
 
 public:
 
     TEWidget(QWidget *parent=0, const char *name=0);
     virtual ~TEWidget();
 
 public:
 
     QColor getDefaultBackColor();
     QPushButton *cornerButton();
 
     const ColorEntry* getColorTable() const;
     const ColorEntry* getdefaultColorTable() const;
     void              setColorTable(const ColorEntry table[]);
 
     void setScrollbarLocation(int loc);
     enum { SCRNONE=0, SCRLEFT=1, SCRRIGHT=2 };
 
     void setScroll(int cursor, int lines);
     void doScroll(int lines);
 
     void emitSelection();
 
 public:
 
     void setImage(const ca* const newimg, int lines, int columns);
 
     int  Lines()   { return lines;   }
     int  Columns() { return columns; }
 
     void calcGeometry();
     void propagateSize();
     QSize calcSize(int cols, int lins) const;
 
     QSize sizeHint() const;
 
 public:
 
     void Bell();
     void emitText(QString text);
     void pasteClipboard();
 
 signals:
 
     void keyPressedSignal(QKeyEvent *e);
     void mouseSignal(int cb, int cx, int cy);
     void changedImageSizeSignal(int lines, int columns);
     void changedHistoryCursor(int value);
     void configureRequest( TEWidget*, int state, int x, int y );
 
     void clearSelectionSignal();
     void beginSelectionSignal( const int x, const int y );
     void extendSelectionSignal( const int x, const int y );
     void endSelectionSignal(const BOOL preserve_line_breaks);
 
 
 protected:
 
     virtual void styleChange( QStyle& );
 
     bool eventFilter( QObject *, QEvent * );
 
     void drawAttrStr(QPainter &paint, QRect rect,
                      QString& str, ca attr, BOOL pm, BOOL clear);
     void paintEvent( QPaintEvent * );
 
     void resizeEvent(QResizeEvent*);
 
     void fontChange(const QFont &font);
     void frameChanged();
 
     void mouseDoubleClickEvent(QMouseEvent* ev);
     void mousePressEvent( QMouseEvent* );
     void mouseReleaseEvent( QMouseEvent* );
     void mouseMoveEvent( QMouseEvent* );
 
     void focusInEvent( QFocusEvent * );
     void focusOutEvent( QFocusEvent * );
     bool focusNextPrevChild( bool next );
 
 #ifndef QT_NO_DRAGANDDROP
     // Dnd
     void dragEnterEvent(QDragEnterEvent* event);
     void dropEvent(QDropEvent* event);
 #endif
diff --git a/noncore/apps/opie-console/emulation_handler.cpp b/noncore/apps/opie-console/emulation_handler.cpp
index bdc8b43..bb3dd28 100644
--- a/noncore/apps/opie-console/emulation_handler.cpp
+++ b/noncore/apps/opie-console/emulation_handler.cpp
@@ -99,96 +99,102 @@ QFont EmulationHandler::font( int id ) {
     case 0:
         name = QString::fromLatin1("Micro");
         size = 4;
         break;
     case 1:
         name = QString::fromLatin1("Fixed");
         size = 7;
         break;
     case 2:
         name = QString::fromLatin1("Fixed");
         size = 12;
         break;
     }
     QFont font(name, size, QFont::Normal );
     font.setFixedPitch(TRUE );
     return font;
 }
 QColor EmulationHandler::foreColor(int col) {
     QColor co;
     /* we need to switch it */
     switch( col ) {
     default:
     case Profile::White:
         /* color is black */
         co = Qt::white;
         break;
     case Profile::Black:
         co = Qt::black;
         break;
     case Profile::Green:
         qWarning("Foreground green");
         co = Qt::green;
         break;
     case Profile::Orange:
         qWarning("Foreground orange");
         // FIXME needs better color here
         co = Qt::darkYellow;
         break;
     }
 
     return co;
 }
 QColor EmulationHandler::backColor(int col ) {
   QColor co;
     /* we need to switch it */
     switch( col ) {
     default:
     case Profile::White:
         /* color is white */
         co = Qt::black;
         break;
     case Profile::Black:
         co = Qt::white;
         break;
     case Profile::Green:
         qWarning("Background black");
         co = Qt::black;
         break;
     case Profile::Orange:
         qWarning("Background black");
         co = Qt::black;
         break;
     }
 
     return co;
 }
 
 QPushButton*  EmulationHandler::cornerButton() {
     return m_teWid->cornerButton();
 }
 
 
 Script *EmulationHandler::script() {
     return m_script;
 }
 
 bool EmulationHandler::isRecording() {
     return (m_script != 0);
 }
 
 void EmulationHandler::startRecording() {
     if (!isRecording())
         m_script = new Script();
 }
 
 void EmulationHandler::clearScript() {
     if (isRecording()) {
         delete m_script;
         m_script = 0;
     }
 }
 
 void EmulationHandler::runScript(const Script *script) {
     emit send(script->script());
 }
 
+void EmulationHandler::copy() {
+    m_teWid->emitSelection();
+}
+void EmulationHandler::paste() {
+    m_teWid->pasteClipboard();
+}
diff --git a/noncore/apps/opie-console/emulation_handler.h b/noncore/apps/opie-console/emulation_handler.h
index 7ca2cf3..12abbc5 100644
--- a/noncore/apps/opie-console/emulation_handler.h
+++ b/noncore/apps/opie-console/emulation_handler.h
@@ -1,90 +1,92 @@
 #ifndef OPIE_EMULATION_HANDLER_H
 #define OPIE_EMULATION_HANDLER_H
 
 #include <qobject.h>
 #include <qcolor.h>
 #include <qcstring.h>
 
 /*
  * Badly ibotty lacks the time to finish
  * his widget in time..
  * Never the less we've to have an EmulationWidget
  * This is why I'm taking the inferior not cleaned
  * up TE* KDE STUFF
  */
 
 /**
  * This is the layer above the IOLayer*
  * This nice QObject here will get stuff from
  * got a slot and a signal
  * the signal for data
  * the slot for receiving
  * it'll set up the widget internally
  * and manage the communication between
  * the pre QByteArray world!
  */
 class Profile;
 class QWidget;
 class QPushButton;
 class TEWidget;
 class TEmulation;
 class QFont;
 class Script;
 class EmulationHandler : public QObject {
     Q_OBJECT
 public:
     /**
      * simple c'tor the parent of the TEWdiget
      * and a name
      * and a Profile
      */
     EmulationHandler( const Profile&, QWidget* parent, const char* name = 0l );
 
     /**
      * delete all components
      */
     ~EmulationHandler();
 
     void load( const Profile& );
     QWidget* widget();
     void setColor( const QColor& fore, const QColor& back );
     QPushButton* cornerButton();
   
     /* Scripts */
     /* Create a new script and record all typed characters */
     void startRecording();
 
     /* Return whether we are currently recording a script */
     bool isRecording();
 
     /* Return the current script (or NULL) */
     Script *script();
 
     /* Stop recording and remove the current script from memory */
     void clearScript();
 
     /* Run a script by forwarding its keys to the EmulationLayer */
     void runScript(const Script *);
 
 signals:
     void send( const QByteArray& );
     void changeSize(int rows, int cols );
 
 
 public slots:
     void recv( const QByteArray& );
+    void paste();
+    void copy();
 
 private slots:
     void recvEmulation( const char*,  int len );
 private:
     QFont font( int );
     QColor foreColor(int );
     QColor backColor(int );
 
 private:
     TEWidget* m_teWid;
     TEmulation* m_teEmu;
     Script * m_script;
 };
 
 #endif
diff --git a/noncore/apps/opie-console/file_layer.cpp b/noncore/apps/opie-console/file_layer.cpp
index 43e9c8f..0c83700 100644
--- a/noncore/apps/opie-console/file_layer.cpp
+++ b/noncore/apps/opie-console/file_layer.cpp
@@ -1,23 +1,23 @@
 #include <qfile.h>
 #include <opie/oprocess.h>
 
 #include "file_layer.h"
 
 FileTransferLayer::FileTransferLayer(IOLayer *layer)
     : QObject(), m_layer( layer )
 {
 }
 
 FileTransferLayer::~FileTransferLayer() {
 }
 
-void FileTransferLayer::sendFile(const QFile& file) {
+void FileTransferLayer::sendFile(const QFile&) {
 
 }
 
-void FileTransferLayer::sendFile(const QString& file) {
+void FileTransferLayer::sendFile(const QString&) {
 }
 
 IOLayer* FileTransferLayer::layer() {
     return m_layer;
 }
diff --git a/noncore/apps/opie-console/io_bt.cpp b/noncore/apps/opie-console/io_bt.cpp
index 4486eea..8dd8151 100644
--- a/noncore/apps/opie-console/io_bt.cpp
+++ b/noncore/apps/opie-console/io_bt.cpp
@@ -1,77 +1,80 @@
 
 #include "io_bt.h"
 
 IOBt::IOBt( const Profile &config ) : IOSerial( config ) {
     m_attach = 0;
 }
 
 
 IOBt::~IOBt() {
     if ( m_attach ) {
         delete m_attach;
     }
 }
 
 
 void IOBt::close() {
 
     IOSerial::close();
     // still need error handling
     if ( m_attach ) {
         delete m_attach;
         m_attach = 0;
     }
 }
 
 bool IOBt::open() {
+    bool ret = false;
 
     // only set up bt stuff if mac address was set, otherwise use the device set
     if ( !m_mac.isEmpty() ) {
 
         // now it should also be checked, if there is a connection to the device with that mac allready
         // hciattach here
         m_attach = new OProcess();
         *m_attach << "hciattach /dev/ttyS2 any 57600";
 
         // then start hcid, then rcfomm handling (m_mac)
 
         connect( m_attach, SIGNAL( processExited( OProcess* ) ),
                  this, SLOT( slotExited( OProcess* ) ) );
 
         if ( m_attach->start() ) {
-            IOSerial::open();
+            ret = IOSerial::open();
         } else {
             qWarning("could not attach to device");
             delete m_attach;
             m_attach = 0;
         }
     } else {
         // directly to the normal serial
         // TODO: look first if the connection really exists. ( is set up )
 
-        IOSerial::open();
+        ret =IOSerial::open();
     }
+    return ret;
 }
 
 void IOBt::reload( const Profile &config ) {
     m_device = config.readEntry("Device", BT_DEFAULT_DEVICE);
     m_mac = config.readEntry("Mac", BT_DEFAULT_MAC);
     m_baud = config.readNumEntry("Baud", BT_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", BT_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", BT_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", BT_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", BT_DEFAULT_FLOW);
 }
 
 
 QString IOBt::identifier() const {
     return "bluetooth";
 }
 
 QString IOBt::name() const {
     return "BLuetooth IO Layer";
 }
 
 void IOBt::slotExited( OProcess* proc ){
     close();
+    delete proc;
 }
diff --git a/noncore/apps/opie-console/io_irda.cpp b/noncore/apps/opie-console/io_irda.cpp
index 56a373c..b3b693f 100644
--- a/noncore/apps/opie-console/io_irda.cpp
+++ b/noncore/apps/opie-console/io_irda.cpp
@@ -1,62 +1,65 @@
 
 #include "io_irda.h"
 
 IOIrda::IOIrda( const Profile &config ) : IOSerial( config ) {
     m_attach = 0;
 }
 
 
 IOIrda::~IOIrda() {
     if ( m_attach ) {
         delete m_attach;
     }
 }
 
 
 void IOIrda::close() {
 
     IOSerial::close();
     // still need error handling
     delete m_attach;
 }
 
 bool IOIrda::open() {
+    bool ret;
 
     // irdaattach here
     m_attach = new OProcess();
     *m_attach << "irattach /dev/ttyS2 -s";
 
     connect( m_attach, SIGNAL( processExited( OProcess* ) ),
             this, SLOT( slotExited( OProcess* ) ) );
 
     if ( m_attach->start() ) {
-        IOSerial::open();
+        ret= IOSerial::open();
     } else {
     // emit error!!!
         qWarning("could not attach to device");
         delete m_attach;
 	m_attach = 0l;
     }
+    return ret;
 }
 
 void IOIrda::reload( const Profile &config ) {
     m_device = config.readEntry("Device", IRDA_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Baud", IRDA_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", IRDA_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", IRDA_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", IRDA_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", IRDA_DEFAULT_FLOW);
 }
 
 
 QString IOIrda::identifier() const {
     return "irda";
 }
 
 QString IOIrda::name() const {
     return "Irda IO Layer";
 }
 
 void IOIrda::slotExited(OProcess* proc ){
     close();
+    delete proc;
 }
diff --git a/noncore/apps/opie-console/mainwindow.cpp b/noncore/apps/opie-console/mainwindow.cpp
index e2f4d12..02a3fa9 100644
--- a/noncore/apps/opie-console/mainwindow.cpp
+++ b/noncore/apps/opie-console/mainwindow.cpp
@@ -1,320 +1,344 @@
 #include <assert.h>
 
 #include <qaction.h>
 #include <qmenubar.h>
 #include <qlabel.h>
 #include <qpopupmenu.h>
 #include <qtoolbar.h>
 #include <qmessagebox.h>
 #include <qpushbutton.h>
 #include <qwhatsthis.h>
 
 #include <qpe/resource.h>
 
 #include <opie/ofiledialog.h>
 
 #include "keytrans.h"
 #include "profileeditordialog.h"
 #include "configdialog.h"
 #include "default.h"
 #include "metafactory.h"
 #include "profile.h"
 #include "profilemanager.h"
 #include "mainwindow.h"
 #include "tabwidget.h"
 #include "transferdialog.h"
 #include "function_keyboard.h"
 #include "emulation_handler.h"
 #include "script.h"
 #include "quick_button.h"
 
 
 
 MainWindow::MainWindow(QWidget *parent, const char *name, WFlags) : QMainWindow(parent, name, WStyle_ContextHelp)  {
     KeyTrans::loadAll();
     for (int i = 0; i < KeyTrans::count(); i++ ) {
         KeyTrans* s = KeyTrans::find(i );
         assert( s );
     }
     m_factory = new MetaFactory();
     Default def(m_factory);
     m_sessions.setAutoDelete( TRUE );
     m_curSession = 0;
     m_manager = new ProfileManager( m_factory );
     m_manager->load();
 
     initUI();
     populateProfiles();
 }
 void MainWindow::initUI() {
     setToolBarsMovable( FALSE  );
 
     /* tool bar for the menu */
     m_tool = new QToolBar( this );
     m_tool->setHorizontalStretchable( TRUE );
 
     m_bar = new QMenuBar( m_tool );
     m_console = new QPopupMenu( this );
     m_scripts = new QPopupMenu( this );
     m_sessionsPop= new QPopupMenu( this );
     //m_settings = new QPopupMenu( this );
 
     /* add a toolbar for icons */
     m_icons = new QToolBar(this);
 
 
 
 
     /*
      * the settings action
      */
     m_setProfiles = new QAction(tr("Configure Profiles"),
                              Resource::loadPixmap( "SettingsIcon" ),
                              QString::null, 0, this, 0);
     //  m_setProfiles->addTo( m_settings );
     m_setProfiles->addTo( m_icons );
     m_setProfiles->addTo( m_console );
     connect( m_setProfiles, SIGNAL(activated() ),
              this, SLOT(slotConfigure() ) );
 
     m_console->insertSeparator();
     /*
      * new Action for new sessions
      */
     QAction* a = new QAction(tr("New Connection"),
                              Resource::loadPixmap( "new" ),
                              QString::null, 0, this, 0);
     a->addTo( m_console );
     a->addTo( m_icons );
     connect(a, SIGNAL(activated() ),
             this, SLOT(slotNew() ) );
 
+    m_console->insertSeparator();
+    /* save icon is not available */
+    a = new QAction(tr("Save Connection"),
+                    Resource::loadPixmap("save"), QString::null,
+                    0, this, 0 );
+    a->addTo( m_console );
+    connect(a, SIGNAL(activated() ),
+            this, SLOT(slotSaveSession() ) );
+    m_console->insertSeparator();
+
     /*
      * connect action
      */
     m_connect = new QAction();
     m_connect->setText( tr("Connect") );
     m_connect->addTo( m_console );
     connect(m_connect, SIGNAL(activated() ),
             this, SLOT(slotConnect() ) );
 
     /*
      * disconnect action
      */
     m_disconnect = new QAction();
     m_disconnect->setText( tr("Disconnect") );
     m_disconnect->addTo( m_console );
     connect(m_disconnect, SIGNAL(activated() ),
             this, SLOT(slotDisconnect() ) );
 
     m_console->insertSeparator();
 
     m_transfer = new QAction();
     m_transfer->setText( tr("Transfer file...") );
     m_transfer->addTo( m_console );
     connect(m_transfer, SIGNAL(activated() ),
             this, SLOT(slotTransfer() ) );
 
 
     /*
      * fullscreen
      */
     m_isFullscreen = false;
 
     m_fullscreen = new QAction( tr("Full screen"), Resource::loadPixmap( "fullscreen" )
                            , QString::null, 0, this, 0);
     m_fullscreen->addTo( m_console );
     m_fullscreen->addTo( m_icons );
     connect( m_fullscreen, SIGNAL( activated() ),
              this,  SLOT( slotFullscreen() ) );
 
     m_console->insertSeparator();
     /*
      * terminate action
      */
     m_terminate = new QAction();
     m_terminate->setText( tr("Terminate") );
     m_terminate->addTo( m_console );
     connect(m_terminate, SIGNAL(activated() ),
             this, SLOT(slotTerminate() ) );
 
     m_closewindow = new QAction();
     m_closewindow->setText( tr("Close Window") );
     m_closewindow->addTo( m_console );
     connect( m_closewindow, SIGNAL(activated() ),
             this, SLOT(slotClose() ) );
 
 
     /*
      * script actions
      */
     m_recordScript = new QAction(tr("Record Script"), QString::null, 0, this, 0);
     m_recordScript->addTo(m_scripts);
     connect(m_recordScript, SIGNAL(activated()), this, SLOT(slotRecordScript()));
 
     m_saveScript = new QAction(tr("Save Script"), QString::null, 0, this, 0);
     m_saveScript->addTo(m_scripts);
     connect(m_saveScript, SIGNAL(activated()), this, SLOT(slotSaveScript()));
 
     m_runScript = new QAction(tr("Run Script"), QString::null, 0, this, 0);
     m_runScript->addTo(m_scripts);
     connect(m_runScript, SIGNAL(activated()), this, SLOT(slotRunScript()));
 
     /*
      * action that open/closes the keyboard
      */
     m_openKeys = new QAction (tr("Open Keyboard..."),
                              Resource::loadPixmap( "down" ),
                              QString::null, 0, this, 0);
 
     m_openKeys->setToggleAction(true);
 
     connect (m_openKeys, SIGNAL(toggled(bool)),
              this, SLOT(slotOpenKeb(bool)));
     m_openKeys->addTo(m_icons);
 
 
     /*
      * action that open/closes the keyboard
  
     m_openButtons = new QAction ( tr( "Open Buttons..." ),
                              Resource::loadPixmap( "" ),
                              QString::null, 0, this, 0 );
 
     m_openButtons->setToggleAction( true );
 
     connect ( m_openButtons, SIGNAL( toggled( bool ) ),
              this, SLOT( slotOpenButtons( bool ) ) );
     m_openButtons->addTo( m_icons );
 
     */
 
     /* insert the submenu */
     m_console->insertItem(tr("New from Profile"), m_sessionsPop,
                           -1, 0);
 
     /* insert the connection menu */
     m_bar->insertItem( tr("Connection"), m_console );
 
     /* the scripts menu */
     m_bar->insertItem( tr("Scripts"), m_scripts );
 
     /* the settings menu */
     // m_bar->insertItem( tr("Settings"), m_settings );
 
     /* and the keyboard */
     m_keyBar = new QToolBar(this);
     addToolBar( m_keyBar,  "Keyboard", QMainWindow::Top, TRUE );
     m_keyBar->setHorizontalStretchable( TRUE );
     m_keyBar->hide();
 
     m_kb = new FunctionKeyboard(m_keyBar);
     connect(m_kb, SIGNAL(keyPressed(FKey, ushort, ushort, bool)),
             this, SLOT(slotKeyReceived(FKey, ushort, ushort, bool)));
 
     m_buttonBar = new QToolBar( this );
     addToolBar( m_buttonBar, "Buttons",  QMainWindow::Top, TRUE );
     m_buttonBar->setHorizontalStretchable( TRUE );
     m_buttonBar->hide();
 
     /*
     m_qb = new QuickButton( m_buttonBar );
     connect( m_qb, SIGNAL( keyPressed( ushort, ushort, bool, bool, bool) ),
             this, SLOT( slotKeyReceived( ushort, ushort, bool, bool, bool) ) );
     */
+    /* now add the copy and paste actions */
+    a = new QAction(tr("Copy"),
+                    Resource::loadPixmap("copy"), QString::null,
+                    0, this, 0 );
+    //a->addTo( m_icons );
+    connect( a, SIGNAL(activated() ),
+             this, SLOT(slotCopy() ) );
+
+    a = new QAction(tr("Paste"),
+                    Resource::loadPixmap("paste"), QString::null,
+                    0, this, 0 );
+    a->addTo( m_icons );
+    connect( a, SIGNAL(activated() ),
+             this, SLOT(slotPaste() ) );
 
 
     m_connect->setEnabled( false );
     m_disconnect->setEnabled( false );
     m_terminate->setEnabled( false );
     m_transfer->setEnabled( false );
     m_recordScript->setEnabled( false );
     m_saveScript->setEnabled( false );
     m_runScript->setEnabled( false );
     m_fullscreen->setEnabled( false );
     m_closewindow->setEnabled( false );
 
     /*
      * connect to the menu activation
      */
     connect( m_sessionsPop, SIGNAL(activated( int ) ),
              this, SLOT(slotProfile( int ) ) );
 
     m_consoleWindow = new TabWidget( this, "blah");
     connect(m_consoleWindow, SIGNAL(activated(Session*) ),
             this, SLOT(slotSessionChanged(Session*) ) );
     setCentralWidget( m_consoleWindow );
 
 }
 
 ProfileManager* MainWindow::manager() {
     return m_manager;
 }
 TabWidget* MainWindow::tabWidget() {
     return m_consoleWindow;
 }
 void MainWindow::populateProfiles() {
     m_sessionsPop->clear();
     Profile::ValueList list = manager()->all();
     for (Profile::ValueList::Iterator it = list.begin(); it != list.end(); ++it ) {
         m_sessionsPop->insertItem( (*it).name() );
     }
 
 }
 MainWindow::~MainWindow() {
     delete m_factory;
     manager()->save();
 }
 
 MetaFactory* MainWindow::factory() {
     return m_factory;
 }
 
 Session* MainWindow::currentSession() {
     return m_curSession;
 }
 
 QList<Session> MainWindow::sessions() {
     return m_sessions;
 }
 
 void MainWindow::slotNew() {
     ProfileEditorDialog dlg(factory() );
     dlg.showMaximized();
     int ret = dlg.exec();
 
     if ( ret == QDialog::Accepted ) {
         create( dlg.profile() );
     }
 }
 
 void MainWindow::slotRecordScript() {
     if (currentSession()) {
         currentSession()->emulationHandler()->startRecording();
     }
 }
 
 void MainWindow::slotSaveScript() {
     if (currentSession() && currentSession()->emulationHandler()->isRecording()) {
         MimeTypes types;
         QStringList script;
         script << "text/plain";
         script << "text/all";
         script << "application/octet-stream";
         types.insert("Script", script);
         QString filename = OFileDialog::getSaveFileName(2, "/", QString::null, types);
         if (!filename.isEmpty()) {
             currentSession()->emulationHandler()->script()->saveTo(filename);
             currentSession()->emulationHandler()->clearScript();
         }
     }
 }
 
 void MainWindow::slotRunScript() {
     if (currentSession()) {
         MimeTypes types;
         QStringList script;
         script << "text/plain";
         script << "text/all";
         script << "application/octet-stream";
         types.insert("Script", script);
@@ -446,96 +470,119 @@ void MainWindow::create( const Profile& prof ) {
     QWidget *w = currentSession()->widget();
     if(w) w->setFocus();
 }
 
 void MainWindow::slotTransfer()
 {
     if ( currentSession() ) {
 	TransferDialog dlg(currentSession()->widgetStack(), this);
 	dlg.showMaximized();
 	//currentSession()->widgetStack()->add(dlg);
 	dlg.exec();
     }
 }
 
 
 void MainWindow::slotOpenKeb(bool state) {
 
     if (state) m_keyBar->show();
     else m_keyBar->hide();
 
 }
 
 
 void MainWindow::slotOpenButtons( bool state ) {
 
     if ( state ) {
         m_buttonBar->show();
     } else {
         m_buttonBar->hide();
     }
 }
 
 
 
 void MainWindow::slotSessionChanged( Session* ses ) {
     qWarning("changed!");
     if ( ses ) {
         m_curSession = ses;
         qDebug(QString("is connected : %1").arg(  m_curSession->layer()->isConnected() ) );
         if ( m_curSession->layer()->isConnected() ) {
             m_connect->setEnabled( false );
             m_disconnect->setEnabled( true );
         } else {
             m_connect->setEnabled( true );
             m_disconnect->setEnabled( false );
         }
 
         QWidget *w = m_curSession->widget();
         if(w) w->setFocus();
     }
 }
 
 void MainWindow::slotFullscreen() {
 
 
 
     if ( m_isFullscreen ) {
         ( m_curSession->widgetStack() )->reparent(  savedParentFullscreen, 0, QPoint(0,0), true );
         ( m_curSession->widgetStack() )->resize( savedParentFullscreen->width(), savedParentFullscreen->height() );
         ( m_curSession->emulationHandler() )->cornerButton()->hide();
         disconnect( ( m_curSession->emulationHandler() )->cornerButton(), SIGNAL( pressed() ), this, SLOT( slotFullscreen() ) );
 
     } else {
         savedParentFullscreen = ( m_curSession->widgetStack() )->parentWidget();
         ( m_curSession->widgetStack() )->setFrameStyle( QFrame::NoFrame );
         ( m_curSession->widgetStack() )->reparent( 0, WStyle_Tool | WStyle_Customize | WStyle_StaysOnTop
                                                    , QPoint(0,0), false );
         ( m_curSession->widgetStack() )->resize( qApp->desktop()->width(), qApp->desktop()->height() );
         ( m_curSession->widgetStack() )->setFocus();
         ( m_curSession->widgetStack() )->show();
 
         ( ( m_curSession->emulationHandler() )->cornerButton() )->show();
 
         connect( ( m_curSession->emulationHandler() )->cornerButton(), SIGNAL( pressed() ), this, SLOT( slotFullscreen() ) );
     }
 
     m_isFullscreen = !m_isFullscreen;
 }
 
 
 void MainWindow::slotKeyReceived(FKey k, ushort, ushort, bool pressed) {
 
     if ( m_curSession ) {
 
         QEvent::Type state;
 
         if (pressed) state = QEvent::KeyPress;
         else state = QEvent::KeyRelease;
 
         QKeyEvent ke(state, k.qcode, k.unicode, 0, QString(QChar(k.unicode)));
 
         // where should i send this event? doesnt work sending it here
         QApplication::sendEvent((QObject *)m_curSession->widget(), &ke);
         ke.ignore();
     }
 }
+void MainWindow::slotCopy() {
+    if (!currentSession() ) return;
+    currentSession()->emulationHandler()->copy();
+}
+void MainWindow::slotPaste() {
+    if (!currentSession() ) return;
+    currentSession()->emulationHandler()->paste();
+}
+
+/*
+ * Save the session
+ */
+
+void MainWindow::slotSaveSession() {
+    if (!currentSession() ) {
+      QMessageBox::information(this, tr("Save Connection"),
+                                          tr("<qt>There is no Connection.</qt>"), 1 );
+      return;
+    }
+    manager()->add( currentSession()->profile() );
+    manager()->save();
+    populateProfiles();
+}
diff --git a/noncore/apps/opie-console/mainwindow.h b/noncore/apps/opie-console/mainwindow.h
index 0f52e76..16b6252 100644
--- a/noncore/apps/opie-console/mainwindow.h
+++ b/noncore/apps/opie-console/mainwindow.h
@@ -1,124 +1,131 @@
 #ifndef OPIE_MAIN_WINDOW_H
 #define OPIE_MAIN_WINDOW_H
 
 #include <qmainwindow.h>
 #include <qlist.h>
 
 #include "session.h"
 
 /**
  * this is the MainWindow of the new opie console
  * it's also the dispatcher between the different
  * actions supported by the gui
  */
 class QToolBar;
 class QToolButton;
 class QMenuBar;
 class QAction;
 class MetaFactory;
 class TabWidget;
 class ProfileManager;
 class Profile;
 class FunctionKeyboard;
 class FKey;
 class QuickButton;
 
 class MainWindow : public QMainWindow {
     Q_OBJECT
 public:
     MainWindow( QWidget *parent = 0, const char *name = 0, WFlags fl = 0 );
     ~MainWindow();
 
     /**
      * our factory to generate IOLayer and so on
      *
      */
     MetaFactory* factory();
 
     /**
      * A session contains a QWidget*,
      * an IOLayer* and some infos for us
      */
     Session* currentSession();
 
     /**
      * the session list
      */
     QList<Session> sessions();
 
     /**
      *
      */
     ProfileManager* manager();
     TabWidget* tabWidget();
 
 private slots:
     void slotNew();
     void slotConnect();
     void slotDisconnect();
     void slotTerminate();
     void slotConfigure();
     void slotClose();
     void slotProfile(int);
     void slotTransfer();
     void slotOpenKeb(bool);
     void slotOpenButtons(bool);
     void slotRecordScript();
     void slotSaveScript();
     void slotRunScript();
     void slotFullscreen();
     void slotSessionChanged( Session* );
     void slotKeyReceived(FKey, ushort, ushort, bool);
 
+    /* what could these both slot do? */
+    void slotCopy();
+    void slotPaste();
+
+    /* save the currentSession() to Profiles */
+    void slotSaveSession();
+
 private:
     void initUI();
     void populateProfiles();
     void create( const Profile& );
     /**
      * the current session
      */
     Session* m_curSession;
 
     /**
      * the session list
      */
     QList<Session> m_sessions;
 
     /**
      * the metafactory
      */
     MetaFactory* m_factory;
     ProfileManager* m_manager;
 
     TabWidget* m_consoleWindow;
     QToolBar* m_tool;
     QToolBar* m_icons;
     QToolBar* m_keyBar;
     QToolBar* m_buttonBar;
     QMenuBar* m_bar;
     QPopupMenu* m_console;
     QPopupMenu* m_settings;
     QPopupMenu* m_sessionsPop;
     QPopupMenu* m_scripts;
     QAction* m_connect;
     QAction* m_disconnect;
     QAction* m_terminate;
     QAction* m_transfer;
     QAction* m_setProfiles;
     QAction* m_openKeys;
     QAction* m_openButtons;
     QAction* m_recordScript;
     QAction* m_saveScript;
     QAction* m_runScript;
     QAction* m_fullscreen;
     QAction* m_closewindow;
 
     FunctionKeyboard *m_kb;
     QuickButton *m_qb;
     bool m_isFullscreen;
 
     QWidget* savedParentFullscreen;
 };
 
 
 #endif
diff --git a/noncore/apps/opie-console/opie-console.control b/noncore/apps/opie-console/opie-console.control
index d41ef58..8541d22 100644
--- a/noncore/apps/opie-console/opie-console.control
+++ b/noncore/apps/opie-console/opie-console.control
@@ -1,10 +1,10 @@
-Files: bin/opie-console apps/Applications/opie-console.desktop pics/console/* etc/keytabs/default.Keytab
+Files: bin/opie-console apps/Applications/opie-console.desktop pics/console/* etc/keytabs/default.Keytab bin/sz bin/rz
 Priority: optional
 Section: opie/applications
 Maintainer: Opie team <opie@handhelds.org>
 Architecture: arm
 Version: 0.6-$SUB_VERSION
 Depends: qpe-base ($QPE_VERSION), libopie ($QPE_VERSION), opie-console-help-en
 License: GPL
 Description: Opie terminal app
  
diff --git a/noncore/apps/opie-console/profilemanager.cpp b/noncore/apps/opie-console/profilemanager.cpp
index 5d39d96..cad2567 100644
--- a/noncore/apps/opie-console/profilemanager.cpp
+++ b/noncore/apps/opie-console/profilemanager.cpp
@@ -1,137 +1,141 @@
 #include <stdio.h>
 #include <stdlib.h>
 
 #include <qfile.h>
 #include <qhbox.h>
 #include <qlayout.h>
 #include <qwidgetstack.h>
 
 #include <qpe/config.h>
 
 #include "emulation_handler.h"
 #include "widget_layer.h"
 #include "emulation_widget.h"
 #include "metafactory.h"
 #include "profileconfig.h"
 #include "profilemanager.h"
 
 ProfileManager::ProfileManager( MetaFactory* fact )
     : m_fact( fact )
 {
 
 }
 ProfileManager::~ProfileManager() {
 
 }
 void ProfileManager::load() {
     m_list.clear();
     ProfileConfig conf("opie-console-profiles");
     QStringList groups = conf.groups();
     QStringList::Iterator it;
 
     /*
      * for each profile
      */
     for ( it = groups.begin(); it != groups.end(); ++it ) {
         conf.setGroup( (*it) );
         Profile prof;
         prof.setName( conf.readEntry("name") );
         prof.setIOLayer( conf.readEntry("iolayer").utf8() );
         prof.setTerminalName( conf.readEntry("term").utf8() );
         prof.setAutoConnect( conf.readBoolEntry("autoConnect") );
         prof.setBackground( conf.readNumEntry("back") );
         prof.setForeground( conf.readNumEntry("fore") );
         prof.setTerminal( conf.readNumEntry("terminal") );
 
         // THIS is evil because all data get's reset
         prof.setConf( conf.items( (*it) ) );
 
         /* now add it */
         m_list.append( prof );
     }
 
 }
 void ProfileManager::clear() {
     m_list.clear();
 }
 Profile::ValueList ProfileManager::all()const {
     return m_list;
 }
 /*
  * Our goal is to create a Session
  * We will load the the IOLayer and EmulationLayer
  * from the factory
  * we will generate a QWidgetStack
  * add a dummy widget with layout
  * add "Widget" to the layout
  * add the dummy to the stack
  * raise the dummy
  * call session->connect(=
  * this way we only need to reparent
  * in TabWidget
  */
 Session* ProfileManager::fromProfile( const Profile& prof,  QWidget* parent) {
 /* TEST PROFILE!!!
     Profile prof;
     QString str = "/dev/ttyS0";
     prof.writeEntry("Device",str );
     prof.writeEntry("Baud", 115200 );
     prof.setIOLayer("serial");
     prof.setName( "test");
 */
     Session* session = new Session();
     session->setName( prof.name() );
     /* translate the internal name to the external */
     session->setIOLayer(m_fact->newIOLayer( m_fact->external(prof.ioLayerName()) ,
                                             prof) );
 
     QWidgetStack *stack = new QWidgetStack( parent );
     session->setWidgetStack( stack );
     QWidget* dummy = new QHBox( stack );
     stack->raiseWidget( dummy );
 
     EmulationHandler* handler = new EmulationHandler(prof,dummy );
     session->setEmulationHandler( handler );
     session->connect();
+    session->setProfile( prof );
 
     return session;
 }
 void ProfileManager::save(  ) {
     QFile::remove( (QString(getenv("HOME") )+ "/Settings/opie-console-profiles.conf" ) );
     ProfileConfig conf("opie-console-profiles");
     Profile::ValueList::Iterator it2;
     for (it2 = m_list.begin(); it2 != m_list.end(); ++it2 ) {
         conf.setGroup( (*it2).name() );
 
         /* now the config stuff */
         QMap<QString, QString> map =  (*it2).conf();
         QMap<QString, QString>::Iterator confIt;
         for ( confIt = map.begin(); confIt != map.end(); ++confIt ) {
             conf.writeEntry( confIt.key(), confIt.data() );
         }
 
         conf.writeEntry( "name", (*it2).name() );
         QString str = QString::fromUtf8( (*it2).ioLayerName() );
 
         conf.writeEntry( "iolayer", str );
         conf.writeEntry( "term", QString::fromUtf8( (*it2).terminalName()  ) );
         conf.writeEntry( "autoConnect", (*it2).autoConnect());
         conf.writeEntry( "back", (*it2).background() );
         conf.writeEntry( "fore", (*it2).foreground() );
         conf.writeEntry( "terminal", (*it2).terminal() );
     }
 }
+void ProfileManager::add( const Profile& prof) {
+    m_list.append( prof );
+}
 void ProfileManager::setProfiles( const Profile::ValueList& list ) {
     m_list = list;
 };
 Profile ProfileManager::profile( const QString& name )const {
     Profile prof;
     Profile::ValueList::ConstIterator it;
     for ( it = m_list.begin(); it != m_list.end(); ++it ) {
         if ( name == (*it).name() ) {
             prof = (*it);
             break;
         }
     }
     return prof;
 }
diff --git a/noncore/apps/opie-console/receive_layer.cpp b/noncore/apps/opie-console/receive_layer.cpp
index 05e2c67..bbde339 100644
--- a/noncore/apps/opie-console/receive_layer.cpp
+++ b/noncore/apps/opie-console/receive_layer.cpp
@@ -1,33 +1,34 @@
 #include <unistd.h>
 
+#include <qdir.h>
 #include <qstring.h>
 #include <qfile.h>
 
 #include "io_layer.h"
 #include "receive_layer.h"
 
 ReceiveLayer::ReceiveLayer( IOLayer* lay, const QString& startDir )
     : QObject(), m_curDir( startDir ), m_layer(lay )
 {
 
 }
 ReceiveLayer::~ReceiveLayer() {
 
 }
 IOLayer* ReceiveLayer::layer() {
     return m_layer;
 }
 QString ReceiveLayer::currentDir()const{
     if (m_curDir.isEmpty() )
-        return QString::fromLocal8Bit( ::getwd(NULL) );
+        return QDir::currentDirPath();
     return m_curDir;
 }
 void ReceiveLayer::changeDir( const QString& str) {
     ::chdir( str.latin1() );
 }
 void ReceiveLayer::receive( const QString& dir, Mode, Features ) {
     receive( dir );
 }
 void ReceiveLayer::cancel() {
 
 }
diff --git a/noncore/apps/opie-console/session.cpp b/noncore/apps/opie-console/session.cpp
index 03d0fcd..c166d95 100644
--- a/noncore/apps/opie-console/session.cpp
+++ b/noncore/apps/opie-console/session.cpp
@@ -1,100 +1,107 @@
 
 
+#include "profile.h"
 #include "io_layer.h"
 #include "file_layer.h"
 #include "emulation_handler.h"
 #include "session.h"
 
 
 Session::Session() {
     m_widget = 0l;
     m_layer = 0l;
     m_emu = 0l;
 }
 Session::Session( const QString& na, QWidgetStack* widget, IOLayer* lay)
     : m_name( na ), m_widget( widget ), m_layer( lay )
 {
 //    m_widLay = 0l;
 //    m_emLay  = 0l;
     m_emu = 0l;
 }
 Session::~Session() {
     delete m_layer;
     delete m_emu;
     delete m_widget;
     /* the widget layer should be deleted by the m_widget */
 }
 QString Session::name()const {
     return m_name;
 }
 QWidgetStack* Session::widgetStack() {
     return m_widget;
 }
 IOLayer* Session::layer() {
     return m_layer;
 }
 EmulationHandler* Session::emulationHandler() {
     return m_emu;
 }
 QWidget* Session::widget() {
     if (!m_emu )
         return 0l;
 
     return m_emu->widget();
 }
+Profile Session::profile()const {
+    return m_prof;
+}
 /*
 WidgetLayer* Session::emulationWidget() {
     return m_widLay;
 }
 */
 void Session::connect() {
     if ( !m_layer || !m_emu )
         return;
 
     QObject::connect(m_layer, SIGNAL(received(const QByteArray&) ),
             m_emu, SLOT(recv(const QByteArray&) ) );
     QObject::connect(m_emu, SIGNAL(send(const QByteArray&) ),
             m_layer, SLOT(send(const QByteArray&) ) );
     QObject::connect(m_emu, SIGNAL(changeSize(int, int) ),
                      m_layer, SLOT(setSize(int, int) ) );
 }
 
 void Session::disconnect() {
 
     if ( !m_layer || !m_emu )
         return;
 
     QObject::disconnect(m_layer, SIGNAL(received(const QByteArray&) ),
             m_emu, SLOT(recv(const QByteArray&) ) );
     QObject::disconnect(m_emu, SIGNAL(send(const QByteArray&) ),
             m_layer, SLOT(send(const QByteArray&) ) );
 }
 
 void Session::setName( const QString& na){
     m_name = na;
 }
 
 void Session::setWidgetStack( QWidgetStack* wid ) {
     delete m_emu;
     m_emu = 0l;
     delete m_widget;
     /* the EmulationLayer was destroyed... */
 
     m_widget = wid;
 }
 void Session::setIOLayer( IOLayer* lay ) {
     delete m_layer;
     m_layer = lay;
 }
 
 void Session::setEmulationHandler( EmulationHandler* lay ) {
     delete m_emu;
     m_emu = lay;
 }
+void Session::setProfile( const Profile& prof ) {
+    m_prof = prof;
+}
 /*
 void Session::setEmulationWidget( WidgetLayer* lay ) {
     delete m_widLay;
     m_widLay = lay;
 }
 */
 
diff --git a/noncore/apps/opie-console/session.h b/noncore/apps/opie-console/session.h
index 83b2046..f60a6c0 100644
--- a/noncore/apps/opie-console/session.h
+++ b/noncore/apps/opie-console/session.h
@@ -1,72 +1,77 @@
 #ifndef OPIE_SESSION_H
 #define OPIE_SESSION_H
 
 #include <qwidgetstack.h>
 
+#include "profile.h"
+
 class IOLayer;
 class EmulationHandler;
 /**
  * This is a Session. A session contains
  * a QWidget pointer and a IOLayer
  * Imagine a session like a collection of what
  * is needed to show your widget in a tab ;)
  */
 class Session {
 public:
     /**
      * c'tor with widget and layer
      * ownership get's transfered
      */
     Session();
     Session( const QString&, QWidgetStack* widget, IOLayer* );
     ~Session();
 
     /**
      * return the name of the session
      */
     QString name()const;
 
     /**
      * return the widgetstack
      * this is used to be semi modal
      * for FileTransfer
      *
      * semi modal == SessionModal
      */
     QWidgetStack* widgetStack();
     QWidget* widget();
 
     /**
      * return the layer
      */
     IOLayer* layer();
 
     EmulationHandler* emulationHandler();
+    Profile profile()const;
 
     /*
      * connects the data flow from
      * the IOLayer to the EmulationLayer
      */
     void connect();
 
     /*
      * disconnect the dataflow
      * this will be done for ft
      */
     void disconnect();
 
     void setWidgetStack( QWidgetStack* widget );
     void setEmulationHandler( EmulationHandler* lay );
     void setIOLayer( IOLayer*  );
     void setName( const QString& );
+    void setProfile( const Profile& );
 
 private:
     QString m_name;
     QWidgetStack* m_widget;
     IOLayer* m_layer;
     EmulationHandler* m_emu;
-    bool m_connected;
+    bool m_connected : 1;
+    Profile m_prof;
 
 };
 
 #endif