Merging the corgie-patches from Branch manually.. (no cvs -j would caused

a big mess .. ;) )
Changed the keysound handling for zaurus: Just all C7x0 and the 5600 will
use the sounddevice.. All other will use the old /dev/sharp_buz device..

1 files changed, 13 insertions, 10 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index fef623a..58254a7 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -1127,24 +1127,25 @@ void iPAQ::init ( )
 
 		f. close ( );
 	}
 
 	switch ( d-> m_model ) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H38xx:
 			d-> m_rotation = Rot90;
 			break;
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 		case Model_iPAQ_H39xx:
+
 		default:
 			d-> m_rotation = Rot270;
 			break;
 		case Model_iPAQ_H5xxx:
 			d-> m_rotation = Rot0;
 		}
 
 	f. setName ( "/etc/familiar-version" );
 	if ( f. open ( IO_ReadOnly )) {
 		d-> m_systemstr = "Familiar";
 		d-> m_system = System_Familiar;
 
@@ -1491,46 +1492,47 @@ int iPAQ::lightSensorResolution ( ) const
  *
  **************************************************/
 
 // Check whether this device is the sharp zaurus..
 bool Zaurus::isZaurus()
 {
 
 	// If the special devices by embedix exist, it is quite simple: it is a Zaurus !
 	if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ) ){
 		return true;
 	}	
 
-	// On non-embedix kenrnels, we have too look closer.
+	// On non-embedix kernels, we have to look closer.
 	bool is_zaurus = false;
 	QFile f ( "/proc/cpuinfo" );
 	if ( f. open ( IO_ReadOnly ) ) {
 		QString model;
 		QFile f ( "/proc/cpuinfo" );
 
   		QTextStream ts ( &f );
   		QString line;
   		while( line = ts. readLine ( ) ) {
   			if ( line. left ( 8 ) == "Hardware" )
   				break;
   		}
   		int loc = line. find ( ":" );
   		if ( loc != -1 )
   			model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
 
 		if ( model == "Sharp-Collie" 
 		     || model == "Collie" 
 		     || model == "SHARP Corgi"
 		     || model == "SHARP Shepherd" 
 		     || model == "SHARP Poodle" 
+                     || model == "SHARP Husky" )
 		   )
 			is_zaurus = true;
 
   	}
 	return is_zaurus;
 }
 
 
 void Zaurus::init ( )
 {
 	d-> m_vendorstr = "Sharp";
 	d-> m_vendor = Vendor_Sharp;
@@ -1583,46 +1585,49 @@ void Zaurus::init ( )
 		QTextStream ts ( &f );
 		QString line;
 		while( line = ts. readLine ( ) ) {
 			if ( line. left ( 8 ) == "Hardware" )
 				break;
 		}
 		int loc = line. find ( ":" );
 		if ( loc != -1 )
 			model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
 	}
 
 	if ( model == "SHARP Corgi" ) {
-		d-> m_model = Model_Zaurus_SLC700;
+		d-> m_model = Model_Zaurus_SLC7x0;
 		d-> m_modelstr = "Zaurus SL-C700";
 	} else if ( model == "SHARP Shepherd" ) {
-		d-> m_model = Model_Zaurus_SLC700; // Do we need a special type for the C750 ? (eilers)
+		d-> m_model = Model_Zaurus_SLC7x0;
 		d-> m_modelstr = "Zaurus SL-C750";
+	} else if ( model == "SHARP Husky" ) {
+		d-> m_model = Model_Zaurus_SLC7x0;
+		d-> m_modelstr = "Zaurus SL-C760";
 	} else if ( model == "SHARP Poodle" ) {
 		d-> m_model = Model_Zaurus_SLB600;
 		d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
 	} else if ( model == "Sharp-Collie" || model == "Collie" ) {
 		d-> m_model = Model_Zaurus_SL5500;
 		d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
 	} else {
 		d-> m_model = Model_Zaurus_SL5500;
 		d-> m_modelstr = "Zaurus (Model unknown)";
 	}
 
 	bool flipstate = false;
 	switch ( d-> m_model ) {
 		case Model_Zaurus_SLA300:
 			d-> m_rotation = Rot0;
 			break;
-		case Model_Zaurus_SLC700:
+		case Model_Zaurus_SLC7x0:
 			// Note: need to 1) set flipstate based on physical screen orientation
 			// and 2) check to see if the user overrode the rotation direction
 			// using appearance, and if so, remove that item from the Config to
 			// ensure the rotate applet flips us back to the previous state.
 			if ( flipstate ) {
 				// 480x640
 				d-> m_rotation = Rot0;
 				d-> m_direction = CW;
 			} else {
 				// 640x480
 				d-> m_rotation = Rot270;
 				d-> m_direction = CCW;
@@ -1639,25 +1644,25 @@ void Zaurus::init ( )
 }
 
 void Zaurus::initButtons ( )
 {
 	if ( d-> m_buttons )
 		return;
 
 	d-> m_buttons = new QValueList <ODeviceButton>;
 
 	struct z_button * pz_buttons;
 	int buttoncount;
 	switch ( d-> m_model ) {
-		case Model_Zaurus_SLC700:
+		case Model_Zaurus_SLC7x0:
 			pz_buttons = z_buttons_c700;
 			buttoncount = ARRAY_SIZE(z_buttons_c700);
 			break;
 		default:
 			pz_buttons = z_buttons;
 			buttoncount = ARRAY_SIZE(z_buttons);
 			break;
 	}
 
 	for ( int i = 0; i < buttoncount; i++ ) {
 		struct z_button *zb = pz_buttons + i;
 		ODeviceButton b;
@@ -1743,29 +1748,27 @@ typedef struct sharp_led_status {
 #define APM_IOCGEVTSRC          OD_IOR( 'A', 203, int )
 #define APM_IOCSEVTSRC          OD_IORW( 'A', 204, int )
 #define APM_EVT_POWER_BUTTON    (1 << 0)
 
 #define FL_IOCTL_STEP_CONTRAST    100
 
 
 void Zaurus::buzzer ( int sound )
 {
 #ifndef QT_NO_SOUND
 	QString soundname;
 
-	// Not all devices have real sound. But I expect
-	// that Openzaurus now has a sound driver which 
-	// I will use instead the buzzer...		
-	if ( ( d->m_model == Model_Zaurus_SLC700 )
-	     || d->m_system == System_OpenZaurus ){
+	// Not all devices have real sound
+	if ( d->m_model == Model_Zaurus_SLC7x0
+	     || d->m_model == Model_Zaurus_SLB600 ){
 
 		switch ( sound ){
 		case SHARP_BUZ_SCHEDULE_ALARM:
 			soundname = "alarm";
 			break;
 		case SHARP_BUZ_TOUCHSOUND:
 			soundname = "touchsound";
 			break;
 		case SHARP_BUZ_KEYSOUND:
 			soundname = "keysound";
 			break;
 		default: