- add fine granular backlight support for devices with the corgi backlight interface

- add hinge sensor framework for devices with hinge sensors

1 files changed, 101 insertions, 35 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index e24e043..bc09e92 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -127,35 +127,38 @@ protected:
 
 public:
 	virtual bool setSoftSuspend ( bool soft );
 
 	virtual bool setDisplayBrightness ( int b );
 	virtual int displayBrightnessResolution ( ) const;
 
 	virtual void alarmSound ( );
 	virtual void keySound ( );
 	virtual void touchSound ( );
 
 	virtual QValueList <OLed> ledList ( ) const;
 	virtual QValueList <OLedState> ledStateList ( OLed led ) const;
 	virtual OLedState ledState ( OLed led ) const;
 	virtual bool setLedState ( OLed led, OLedState st );
 
+	virtual bool hasHingeSensor() const;
+	virtual OHingeStatus readHingeSensor();
+
 	static bool isZaurus();
-	
-	// Does this break BC? 
+
+	// Does this break BC?
 	virtual bool suspend ( );
 	virtual Transformation rotation ( ) const;
 	virtual ODirection direction ( ) const;
 
 protected:
 	virtual void buzzer ( int snd );
 
 	OLedState m_leds [1];
 	bool m_embedix;
 };
 
 class SIMpad : public ODevice, public QWSServer::KeyboardFilter {
 protected:
 	virtual void init ( );
 	virtual void initButtons ( );
 
@@ -520,33 +523,33 @@ void ODevice::initButtons ( )
 			b. setKeycode ( ib-> code );
 			b. setUserText ( QObject::tr ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
 			d-> m_buttons-> append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 ODevice::~ODevice ( )
 {
-// we leak m_devicebuttons and m_cpu_frequency 
+// we leak m_devicebuttons and m_cpu_frequency
 // but it's a singleton and it is not so importantant
 // -zecke
 	delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
 	return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 /**
  * This method will try to suspend the device
@@ -810,59 +813,75 @@ OLedState ODevice::ledState ( OLed /*which*/ ) const
 bool ODevice::setLedState ( OLed which, OLedState st )
 {
         Q_UNUSED( which )
         Q_UNUSED( st    )
 	return false;
 }
 
 /**
  * @return if the device has a light sensor
  */
 bool ODevice::hasLightSensor ( ) const
 {
 	return false;
 }
 
 /**
- * @return a value from the light senso
+ * @return a value from the light sensor
  */
 int ODevice::readLightSensor ( )
 {
 	return -1;
 }
 
 /**
- * @return the light sensor resolution whatever that is ;)
+ * @return the light sensor resolution
  */
 int ODevice::lightSensorResolution ( ) const
 {
 	return 0;
 }
 
 /**
+ * @return if the device has a hinge sensor
+ */
+bool ODevice::hasHingeSensor ( ) const
+{
+	return false;
+}
+
+/**
+ * @return a value from the hinge sensor
+ */
+OHingeStatus ODevice::readHingeSensor ( )
+{
+	return CASE_UNKNOWN;
+}
+
+/**
  * @return a list with CPU frequencies supported by the hardware
  */
 const QStrList &ODevice::allowedCpuFrequencies ( ) const
 {
 	return *d->m_cpu_frequencies;
 }
 
 
 /**
  * Set desired CPU frequency
- * 
+ *
  * @param index index into d->m_cpu_frequencies of the frequency to be set
  */
 bool ODevice::setCurrentCpuFrequency(uint index)
 {
 	if (index >= d->m_cpu_frequencies->count())
 		return false;
 
 	char *freq = d->m_cpu_frequencies->at(index);
 	qWarning("set freq to %s", freq);
 
 	int fd;
 
 	if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) {
 		char writeCommand[50];
 		const int count = sprintf(writeCommand, "%s\n", freq);
 		int res = (::write(fd, writeCommand, count) != -1);
@@ -1769,33 +1788,33 @@ void Zaurus::buzzer ( int sound )
 	// Not all devices have real sound
 	if ( d->m_model == Model_Zaurus_SLC7x0
 	     || d->m_model == Model_Zaurus_SLB600 ){
 
 		switch ( sound ){
 		case SHARP_BUZ_SCHEDULE_ALARM:
 			soundname = "alarm";
 			break;
 		case SHARP_BUZ_TOUCHSOUND:
 			soundname = "touchsound";
 			break;
 		case SHARP_BUZ_KEYSOUND:
 			soundname = "keysound";
 			break;
 		default:
 			soundname = "alarm";
-			
+
 		}
 	}
 
 	// If a soundname is defined, we expect that this device has
 	// sound capabilities.. Otherwise we expect to have the buzzer
 	// device..
 	if ( !soundname.isEmpty() ){
 		int fd;
 		int vol;
 		bool vol_reset = false;
 
 		Sound snd ( soundname );
 		
 		if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
 			if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
 				Config cfg ( "qpe" );
@@ -1932,59 +1951,75 @@ bool Zaurus::setSoftSuspend ( bool soft )
 				perror ( "APM_IOCGEVTSRC" );
 		}
 		else
 			perror ( "APM_IOCGEVTSRC" );
 
 		::close ( fd );
 	}
 	else
 		perror ( "/dev/apm_bios or /dev/misc/apm_bios" );
 
     return res;
 }
 
 
 bool Zaurus::setDisplayBrightness ( int bright )
 {
-// FIXME The C7x0 have a proc-interface (/proc/drivers/corgi-bl) which
-//       is nice to use. Currently it exposes 16+1 levels. Implement this!
-//       (or wait for kergoth unifying the interfaces in the OpenZaurus kernel.)
-	bool res = false;
-	int fd;
-
-	if ( bright > 255 )
-		bright = 255;
-	if ( bright < 0 )
-		bright = 0;
-
-	if (m_embedix) {
-		if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
-			int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
-			if ( bright && !bl )
-				bl = 1;
-			res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
-			::close ( fd );
-		}
-	} else {
-#define FB_BACKLIGHT_SET_BRIGHTNESS     _IOW('F', 1, u_int)             /* set brightness */
-		if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) {
-			res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 );
-			::close ( fd );
-		}
-	}
-	return res;
+    bool res = false;
+    int fd;
+
+    if ( bright > 255 ) bright = 255;
+    if ( bright < 0 ) bright = 0;
+
+    if ( m_embedix )
+    {
+        if ( d->m_model == Model_Zaurus_SLC7x0 )
+        {
+            // special treatment for devices with the corgi backlight interface
+            if (( fd = ::open ( "/proc/driver/fl/corgi-bl", O_WRONLY )) >= 0 )
+            {
+                if ( bright > 0x11 ) bright = 0x11;
+                char writeCommand[100];
+                const int count = sprintf( writeCommand, "0x%x\n", bright );
+                res = ( ::write ( fd, writeCommand, count ) != -1 );
+                ::close ( fd );
+            }
+            return res;
+        }
+        else
+        {
+            // standard treatment for devices with the dumb embedix frontlight interface
+            if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
+                int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
+                if ( bright && !bl )
+                    bl = 1;
+                res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
+                ::close ( fd );
+            }
+        }
+    }
+    else
+    {
+        // special treatment for the OpenZaurus unified interface
+        #define FB_BACKLIGHT_SET_BRIGHTNESS     _IOW('F', 1, u_int)             /* set brightness */
+        if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) {
+            res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 );
+            ::close ( fd );
+        }
+    }
+    return res;
 }
 
 bool Zaurus::suspend ( )
 {
 	qDebug("ODevice::suspend");
 	if ( !isQWS( ) ) // only qwsserver is allowed to suspend
 		return false;
 
 	if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
 		return false;
 
 	bool res = false;
 
 	struct timeval tvs, tvn;
 	::gettimeofday ( &tvs, 0 );
 
@@ -2060,37 +2095,68 @@ ODirection Zaurus::direction ( ) const
 			break;
 		case Model_Zaurus_SLA300:
 		case Model_Zaurus_SLB600:
 		case Model_Zaurus_SL5500:
 		case Model_Zaurus_SL5000:
 		default:
 			dir = d-> m_direction;
 			break;
 	}
 	return dir;
 
 }
 
 int Zaurus::displayBrightnessResolution ( ) const
 {
 	if (m_embedix)
-		return 5;
+		return d->m_model == Model_Zaurus_SLC7x0 ? 18 : 5;
 	else
 		return 256;
 }
 
+bool Zaurus::hasHingeSensor() const
+{
+    return d->m_model == Model_Zaurus_SLC7x0;
+}
+
+OHingeStatus Zaurus::readHingeSensor()
+{
+    int handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK);
+    if (handle == -1)
+    {
+        qWarning("Zaurus::readHingeSensor() - failed (%s)", "unknown reason" ); //FIXME: use strerror
+        return CASE_UNKNOWN;
+    }
+    else
+    {
+        int retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION);
+        ::close (handle);
+        if ( retval == CASE_CLOSED || retval == CASE_PORTRAIT || retval == CASE_LANDSCAPE )
+        {
+            qDebug( "Zaurus::readHingeSensor() - result = %d", retval );
+            return static_cast<OHingeStatus>( retval );
+        }
+        else
+        {
+            qWarning("Zaurus::readHingeSensor() - couldn't compute hinge status!" );
+            return CASE_UNKNOWN;
+        }
+    }
+}
+
+
 /**************************************************
  *
  * SIMpad
  *
  **************************************************/
 
 void SIMpad::init ( )
 {
 	d-> m_vendorstr = "SIEMENS";
 	d-> m_vendor = Vendor_SIEMENS;
 
 	QFile f ( "/proc/hal/model" );
 
     //TODO Implement model checking
     //FIXME For now we assume an SL4