run the optimize_connect script

the whole cvs is tagged with "before_optimize_connect" if there are problems you
can check the diff (but it had compiled and run here)

5 files changed, 7 insertions, 7 deletions

diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp
index b8d48fe..27b0e53 100644
--- a/libopie2/opiecore/device/odevice.cpp
+++ b/libopie2/opiecore/device/odevice.cpp
@@ -132,33 +132,33 @@ void ODevice::init()
 }
 
 /**
 * This method initialises the button mapping
 */
 void ODevice::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     qDebug ( "init Buttons" );
     d->m_buttons = new QValueList <ODeviceButton>;
 
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 ODevice::~ODevice()
 {
 // we leak m_devicebuttons and m_cpu_frequency
 // but it's a singleton and it is not so importantant
 // -zecke
     delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
     return false;
 }
 
 //#include <linux/apm_bios.h>
diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp
index cc4b01a..8ecea1b 100644
--- a/libopie2/opiecore/device/odevice_ipaq.cpp
+++ b/libopie2/opiecore/device/odevice_ipaq.cpp
@@ -199,33 +199,33 @@ void iPAQ::initButtons()
         i_button *ib = ipaq_buttons + i;
         ODeviceButton b;
 
         if (( ib->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( ib->code );
             b. setUserText ( QObject::tr ( "Button", ib->utext ));
             b. setPixmap ( Resource::loadPixmap ( ib->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 QValueList <OLed> iPAQ::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power;
 
     if ( d->m_model == Model_iPAQ_H38xx )
         vl << Led_BlueTooth;
     return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp
index 31b9297..90aca2f 100644
--- a/libopie2/opiecore/device/odevice_simpad.cpp
+++ b/libopie2/opiecore/device/odevice_simpad.cpp
@@ -176,33 +176,33 @@ void SIMpad::initButtons()
         s_button *sb = simpad_buttons + i;
         ODeviceButton b;
 
         if (( sb->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( sb->code );
             b. setUserText ( QObject::tr ( "Button", sb->utext ));
             b. setPixmap ( Resource::loadPixmap ( sb->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
diff --git a/libopie2/opiecore/device/odevice_yopy.cpp b/libopie2/opiecore/device/odevice_yopy.cpp
index a76f90b..d241db8 100644
--- a/libopie2/opiecore/device/odevice_yopy.cpp
+++ b/libopie2/opiecore/device/odevice_yopy.cpp
@@ -106,34 +106,34 @@ void Yopy::initButtons()
 
         ODeviceButton b;
 
         b. setKeycode ( ib->code );
         b. setUserText ( QObject::tr ( "Button", ib->utext ) );
         b. setPixmap ( Resource::loadPixmap ( ib->pix ) );
         b. setFactoryPresetPressedAction
         ( OQCopMessage( makeChannel( ib->fpressedservice ), ib->fpressedaction ) );
         b. setFactoryPresetHeldAction
         ( OQCopMessage( makeChannel( ib->fheldservice ), ib->fheldaction ) );
 
         d->m_buttons->append ( b );
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel( "QPE/System", this );
-    connect( sysch, SIGNAL( received( const QCString &, const QByteArray & ) ),
-             this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) );
+    connect( sysch, SIGNAL( received(const QCString&,const QByteArray&) ),
+             this, SLOT( systemMessage(const QCString&,const QByteArray&) ) );
 }
 
 
 bool Yopy::suspend()
 {
     /* Opie for Yopy does not implement its own power management at the
         moment.  The public version runs parallel to X, and relies on the
         existing power management features. */
     return false;
 }
 
 
 bool Yopy::setDisplayBrightness( int bright )
 {
     /* The code here works, but is disabled as the current version runs
         parallel to X, and relies on the existing backlight demon. */
diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp
index 9d23a12..8ab3cbe 100644
--- a/libopie2/opiecore/device/odevice_zaurus.cpp
+++ b/libopie2/opiecore/device/odevice_zaurus.cpp
@@ -239,34 +239,34 @@ void Zaurus::initButtons()
         ODeviceButton b;
 
         b. setKeycode ( zb->code );
         b. setUserText ( QObject::tr ( "Button", zb->utext ));
         b. setPixmap ( Resource::loadPixmap ( zb->pix ));
         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb->fpressedservice ),
                                 zb->fpressedaction ));
         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb->fheldservice ),
                                 zb->fheldaction ));
 
         d->m_buttons->append ( b );
     }
 
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )),
-        this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)),
+        this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
         #defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */