author | alwin <alwin> | 2004-03-02 12:14:15 (UTC) |
---|---|---|
committer | alwin <alwin> | 2004-03-02 12:14:15 (UTC) |
commit | 0d59c780513da78033f4d9040475dee9db0256d4 (patch) (side-by-side diff) | |
tree | 503d320b4aa3daae9982082e7b34e3e2c48bdfb7 /libopie2/opiecore/device | |
parent | a0981652d61776d70f25980f035748b21339e946 (diff) | |
download | opie-0d59c780513da78033f4d9040475dee9db0256d4.zip opie-0d59c780513da78033f4d9040475dee9db0256d4.tar.gz opie-0d59c780513da78033f4d9040475dee9db0256d4.tar.bz2 |
run the optimize_connect script
the whole cvs is tagged with "before_optimize_connect" if there are problems you
can check the diff (but it had compiled and run here)
-rw-r--r-- | libopie2/opiecore/device/odevice.cpp | 2 | ||||
-rw-r--r-- | libopie2/opiecore/device/odevice_ipaq.cpp | 2 | ||||
-rw-r--r-- | libopie2/opiecore/device/odevice_simpad.cpp | 2 | ||||
-rw-r--r-- | libopie2/opiecore/device/odevice_yopy.cpp | 4 | ||||
-rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.cpp | 4 |
5 files changed, 7 insertions, 7 deletions
diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp index b8d48fe..27b0e53 100644 --- a/libopie2/opiecore/device/odevice.cpp +++ b/libopie2/opiecore/device/odevice.cpp @@ -100,97 +100,97 @@ ODevice *ODevice::inst() } return dev; } ODevice::ODevice() { d = new ODeviceData; d->m_modelstr = "Unknown"; d->m_model = Model_Unknown; d->m_vendorstr = "Unknown"; d->m_vendor = Vendor_Unknown; d->m_systemstr = "Unknown"; d->m_system = System_Unknown; d->m_sysverstr = "0.0"; d->m_rotation = Rot0; d->m_direction = CW; d->m_holdtime = 1000; // 1000ms d->m_buttons = 0; d->m_cpu_frequencies = new QStrList; } void ODevice::systemMessage ( const QCString &msg, const QByteArray & ) { if ( msg == "deviceButtonMappingChanged()" ) { reloadButtonMapping(); } } void ODevice::init() { } /** * This method initialises the button mapping */ void ODevice::initButtons() { if ( d->m_buttons ) return; qDebug ( "init Buttons" ); d->m_buttons = new QValueList <ODeviceButton>; reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); + connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } ODevice::~ODevice() { // we leak m_devicebuttons and m_cpu_frequency // but it's a singleton and it is not so importantant // -zecke delete d; } bool ODevice::setSoftSuspend ( bool /*soft*/ ) { return false; } //#include <linux/apm_bios.h> #define APM_IOC_SUSPEND OD_IO( 'A', 2 ) /** * This method will try to suspend the device * It only works if the user is the QWS Server and the apm application * is installed. * It tries to suspend and then waits some time cause some distributions * do have asynchronus apm implementations. * This method will either fail and return false or it'll suspend the * device and return once the device got woken up * * @return if the device got suspended */ bool ODevice::suspend() { qDebug("ODevice::suspend"); if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices return false; bool res = false; ODevice::sendSuspendmsg(); struct timeval tvs, tvn; ::gettimeofday ( &tvs, 0 ); ::sync(); // flush fs caches res = ( ::system ( "apm --suspend" ) == 0 ); diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp index cc4b01a..8ecea1b 100644 --- a/libopie2/opiecore/device/odevice_ipaq.cpp +++ b/libopie2/opiecore/device/odevice_ipaq.cpp @@ -167,97 +167,97 @@ void iPAQ::init() f. close(); } else { f. setName ( "/etc/oz_version" ); if ( f. open ( IO_ReadOnly )) { d->m_systemstr = "OpenEmbedded/iPaq"; d->m_system = System_Familiar; QTextStream ts ( &f ); ts.setDevice ( &f ); d->m_sysverstr = ts. readLine(); f. close(); } } m_leds [0] = m_leds [1] = Led_Off; m_power_timer = 0; } void iPAQ::initButtons() { if ( d->m_buttons ) return; if ( isQWS( ) ) QWSServer::setKeyboardFilter ( this ); d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) { i_button *ib = ipaq_buttons + i; ODeviceButton b; if (( ib->model & d->m_model ) == d->m_model ) { b. setKeycode ( ib->code ); b. setUserText ( QObject::tr ( "Button", ib->utext )); b. setPixmap ( Resource::loadPixmap ( ib->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction )); d->m_buttons->append ( b ); } } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); + connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } QValueList <OLed> iPAQ::ledList() const { QValueList <OLed> vl; vl << Led_Power; if ( d->m_model == Model_iPAQ_H38xx ) vl << Led_BlueTooth; return vl; } QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Power ) vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast; else if ( l == Led_BlueTooth && d->m_model == Model_iPAQ_H38xx ) vl << Led_Off; // << Led_On << ??? return vl; } OLedState iPAQ::ledState ( OLed l ) const { switch ( l ) { case Led_Power: return m_leds [0]; case Led_BlueTooth: return m_leds [1]; default: return Led_Off; } } bool iPAQ::setLedState ( OLed l, OLedState st ) { static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK ); if ( l == Led_Power ) { if ( fd >= 0 ) { LED_IN leds; ::memset ( &leds, 0, sizeof( leds )); leds. TotalTime = 0; leds. OnTime = 0; leds. OffTime = 1; leds. OffOnBlink = 2; diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp index 31b9297..90aca2f 100644 --- a/libopie2/opiecore/device/odevice_simpad.cpp +++ b/libopie2/opiecore/device/odevice_simpad.cpp @@ -144,97 +144,97 @@ void SIMpad::init() f. close(); } else { f. setName ( "/etc/oz_version" ); if ( f. open ( IO_ReadOnly )) { d->m_systemstr = "OpenEmbedded/SIMpad"; d->m_system = System_OpenZaurus; QTextStream ts ( &f ); ts.setDevice ( &f ); d->m_sysverstr = ts. readLine(); f. close(); } } m_leds [0] = m_leds [1] = Led_Off; m_power_timer = 0; } void SIMpad::initButtons() { if ( d->m_buttons ) return; if ( isQWS( ) ) QWSServer::setKeyboardFilter ( this ); d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) { s_button *sb = simpad_buttons + i; ODeviceButton b; if (( sb->model & d->m_model ) == d->m_model ) { b. setKeycode ( sb->code ); b. setUserText ( QObject::tr ( "Button", sb->utext )); b. setPixmap ( Resource::loadPixmap ( sb->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction )); d->m_buttons->append ( b ); } } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); + connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } // SIMpad boardcontrol register CS3 #define SIMPAD_BOARDCONTROL "/proc/cs3" #define SIMPAD_VCC_5V_EN 0x0001 // For 5V PCMCIA #define SIMPAD_VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA #define SIMPAD_EN1 0x0004 // This is only for EPROM's #define SIMPAD_EN0 0x0008 // Both should be enable for 3.3V or 5V #define SIMPAD_DISPLAY_ON 0x0010 #define SIMPAD_PCMCIA_BUFF_DIS 0x0020 #define SIMPAD_MQ_RESET 0x0040 #define SIMPAD_PCMCIA_RESET 0x0080 #define SIMPAD_DECT_POWER_ON 0x0100 #define SIMPAD_IRDA_SD 0x0200 // Shutdown for powersave #define SIMPAD_RS232_ON 0x0400 #define SIMPAD_SD_MEDIAQ 0x0800 // Shutdown for powersave #define SIMPAD_LED2_ON 0x1000 #define SIMPAD_IRDA_MODE 0x2000 // Fast/Slow IrDA mode #define SIMPAD_ENABLE_5V 0x4000 // Enable 5V circuit #define SIMPAD_RESET_SIMCARD 0x8000 //SIMpad touchscreen backlight strength control #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL" #define SIMPAD_BACKLIGHT_MASK 0x00a10044 QValueList <OLed> SIMpad::ledList() const { QValueList <OLed> vl; vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one? //vl << Led_Mail; //TODO find out if LED1 is accessible anyway return vl; } QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Power ) //FIXME which LED is LED2 ? The green one or the amber one? vl << Led_Off << Led_On; //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway //vl << Led_Off; return vl; } OLedState SIMpad::ledState ( OLed l ) const { switch ( l ) { case Led_Power: diff --git a/libopie2/opiecore/device/odevice_yopy.cpp b/libopie2/opiecore/device/odevice_yopy.cpp index a76f90b..d241db8 100644 --- a/libopie2/opiecore/device/odevice_yopy.cpp +++ b/libopie2/opiecore/device/odevice_yopy.cpp @@ -74,90 +74,90 @@ void Yopy::init() { d->m_vendorstr = "G.Mate"; d->m_vendor = Vendor_GMate; d->m_modelstr = "Yopy3700"; d->m_model = Model_Yopy_3700; d->m_rotation = Rot0; d->m_systemstr = "Linupy"; d->m_system = System_Linupy; QFile f ( "/etc/issue" ); if ( f. open ( IO_ReadOnly ) ) { QTextStream ts ( &f ); ts.readLine(); d->m_sysverstr = ts. readLine(); f. close(); } } void Yopy::initButtons() { if ( d->m_buttons ) return ; d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof( yopy_button ) ); i++ ) { yopy_button *ib = yopy_buttons + i; ODeviceButton b; b. setKeycode ( ib->code ); b. setUserText ( QObject::tr ( "Button", ib->utext ) ); b. setPixmap ( Resource::loadPixmap ( ib->pix ) ); b. setFactoryPresetPressedAction ( OQCopMessage( makeChannel( ib->fpressedservice ), ib->fpressedaction ) ); b. setFactoryPresetHeldAction ( OQCopMessage( makeChannel( ib->fheldservice ), ib->fheldaction ) ); d->m_buttons->append ( b ); } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel( "QPE/System", this ); - connect( sysch, SIGNAL( received( const QCString &, const QByteArray & ) ), - this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) ); + connect( sysch, SIGNAL( received(const QCString&,const QByteArray&) ), + this, SLOT( systemMessage(const QCString&,const QByteArray&) ) ); } bool Yopy::suspend() { /* Opie for Yopy does not implement its own power management at the moment. The public version runs parallel to X, and relies on the existing power management features. */ return false; } bool Yopy::setDisplayBrightness( int bright ) { /* The code here works, but is disabled as the current version runs parallel to X, and relies on the existing backlight demon. */ #if 0 if ( QFile::exists( "/proc/sys/pm/light" ) ) { int fd = ::open( "/proc/sys/pm/light", O_WRONLY ); if ( fd >= 0 ) { if ( bright ) ::write( fd, "1\n", 2 ); else ::write( fd, "0\n", 2 ); ::close( fd ); return true; } } #endif return false; } int Yopy::displayBrightnessResolution() const { return 2; } diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp index 9d23a12..8ab3cbe 100644 --- a/libopie2/opiecore/device/odevice_zaurus.cpp +++ b/libopie2/opiecore/device/odevice_zaurus.cpp @@ -207,98 +207,98 @@ void Zaurus::init() case Model_Zaurus_SLB600: case Model_Zaurus_SL5500: case Model_Zaurus_SL5000: default: d->m_rotation = Rot270; break; } m_leds [0] = Led_Off; } void Zaurus::initButtons() { if ( d->m_buttons ) return; d->m_buttons = new QValueList <ODeviceButton>; struct z_button * pz_buttons; int buttoncount; switch ( d->m_model ) { case Model_Zaurus_SLC7x0: pz_buttons = z_buttons_c700; buttoncount = ARRAY_SIZE(z_buttons_c700); break; default: pz_buttons = z_buttons; buttoncount = ARRAY_SIZE(z_buttons); break; } for ( int i = 0; i < buttoncount; i++ ) { struct z_button *zb = pz_buttons + i; ODeviceButton b; b. setKeycode ( zb->code ); b. setUserText ( QObject::tr ( "Button", zb->utext )); b. setPixmap ( Resource::loadPixmap ( zb->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb->fpressedservice ), zb->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb->fheldservice ), zb->fheldaction )); d->m_buttons->append ( b ); } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), - this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); + connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), + this, SLOT( systemMessage(const QCString&,const QByteArray&))); } #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> //#include <asm/sharp_char.h> // including kernel headers is evil ... #define SHARP_DEV_IOCTL_COMMAND_START 0x5680 #define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) #define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START) #define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */ #define SHARP_BUZ_KEYSOUND 2 /* key sound */ #define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */ /* --- for SHARP_BUZZER device --- */ //#define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) //#define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START) #define SHARP_BUZZER_SETVOLUME (SHARP_BUZZER_IOCTL_START+1) #define SHARP_BUZZER_GETVOLUME (SHARP_BUZZER_IOCTL_START+2) #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3) #define SHARP_BUZZER_SETMUTE (SHARP_BUZZER_IOCTL_START+4) #define SHARP_BUZZER_STOPSOUND (SHARP_BUZZER_IOCTL_START+5) //#define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */ //#define SHARP_BUZ_KEYSOUND 2 /* key sound */ //#define SHARP_PDA_ILLCLICKSOUND 3 /* illegal click */ //#define SHARP_PDA_WARNSOUND 4 /* warning occurred */ //#define SHARP_PDA_ERRORSOUND 5 /* error occurred */ //#define SHARP_PDA_CRITICALSOUND 6 /* critical error occurred */ //#define SHARP_PDA_SYSSTARTSOUND 7 /* system start */ //#define SHARP_PDA_SYSTEMENDSOUND 8 /* system shutdown */ //#define SHARP_PDA_APPSTART 9 /* application start */ //#define SHARP_PDA_APPQUIT 10 /* application ends */ //#define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */ //#define SHARP_BUZ_DAILY_ALARM 12 /* daily alarm */ //#define SHARP_BUZ_GOT_PHONE_CALL 13 /* phone call sound */ //#define SHARP_BUZ_GOT_MAIL 14 /* mail sound */ // #define SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) #define SHARP_LED_SETSTATUS (SHARP_LED_IOCTL_START+1) |