run the optimize_connect script

the whole cvs is tagged with "before_optimize_connect" if there are problems you
can check the diff (but it had compiled and run here)

6 files changed, 13 insertions, 13 deletions

diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp
index b8d48fe..27b0e53 100644
--- a/libopie2/opiecore/device/odevice.cpp
+++ b/libopie2/opiecore/device/odevice.cpp
@@ -1,340 +1,340 @@
 /*
                      This file is part of the Opie Project
                       Copyright (C) The Opie Team <opie-devel@handhelds.org>
               =.
             .=l.
      .>+-=
 _;:,   .>  :=|.         This program is free software; you can
 .> <`_,  > .  <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--  :           the terms of the GNU Library General Public
 .="- .-=="i,   .._         License as published by the Free Software
 - .  .-<_>   .<>         Foundation; either version 2 of the License,
   ._= =}    :          or (at your option) any later version.
   .%`+i>    _;_.
   .i_,=:_.   -<s.       This program is distributed in the hope that
   + . -:.    =       it will be useful,  but WITHOUT ANY WARRANTY;
   : ..  .:,   . . .    without even the implied warranty of
   =_    +   =;=|`    MERCHANTABILITY or FITNESS FOR A
  _.=:.    :  :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=    =    ;      Library General Public License for more
 ++=  -.   .`   .:       details.
 :   = ...= . :.=-
 -.  .:....=;==+<;          You should have received a copy of the GNU
  -_. . .  )=. =           Library General Public License along with
   --    :-=`           this library; see the file COPYING.LIB.
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 */
 
 #include "odevice_ipaq.h"
 #include "odevice_jornada.h"
 #include "odevice_ramses.h"
 #include "odevice_simpad.h"
 #include "odevice_yopy.h"
 #include "odevice_zaurus.h"
 
 /* QT */
 #include <qapplication.h>
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qwindowsystem_qws.h>
 
 /* OPIE */
 #include <qpe/config.h>
 #include <qpe/resource.h>
 #include <qpe/sound.h>
 #include <qpe/qcopenvelope_qws.h>
 
 /* STD */
 #include <fcntl.h>
 #include <math.h>
 #include <stdlib.h>
 #include <signal.h>
 #include <sys/ioctl.h>
 #include <sys/time.h>
 #include <unistd.h>
 #ifndef QT_NO_SOUND
 #include <linux/soundcard.h>
 #endif
 
 const char* PATH_PROC_CPUINFO = "/proc/cpuinfo";
 
 using namespace Opie;
 
 ODevice *ODevice::inst()
 {
     static ODevice *dev = 0;
 
     // rewrite this to only use /proc/cpuinfo or so
 
     if ( !dev )
     {
         QFile f( PATH_PROC_CPUINFO );
         if ( f.open( IO_ReadOnly ) )
         {
             QTextStream s( &f );
             while ( !s.atEnd() )
             {
                 QString line;
                 line = s.readLine();
                 if ( line.startsWith( "Hardware" ) )
                 {
                     qDebug( "ODevice() - found '%s'", (const char*) line );
                     if ( line.contains( "sharp", false ) ) dev = new Zaurus();
                     else if ( line.contains( "ipaq", false ) ) dev = new iPAQ();
                     else if ( line.contains( "simpad", false ) ) dev = new SIMpad();
                     else if ( line.contains( "jornada", false ) ) dev = new Jornada();
                     else if ( line.contains( "ramses", false ) ) dev = new Ramses();
                     else qWarning( "ODevice() - unknown hardware - using default." );
                     break;
                 }
             }
         }
         else
         {
             qWarning( "ODevice() - can't open '%s' - unknown hardware - using default." );
         }
         if ( !dev ) dev = new ODevice();
         dev->init();
     }
     return dev;
 }
 
 ODevice::ODevice()
 {
     d = new ODeviceData;
 
     d->m_modelstr = "Unknown";
     d->m_model = Model_Unknown;
     d->m_vendorstr = "Unknown";
     d->m_vendor = Vendor_Unknown;
     d->m_systemstr = "Unknown";
     d->m_system = System_Unknown;
     d->m_sysverstr = "0.0";
     d->m_rotation = Rot0;
     d->m_direction = CW;
 
     d->m_holdtime = 1000; // 1000ms
     d->m_buttons = 0;
     d->m_cpu_frequencies = new QStrList;
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
     if ( msg == "deviceButtonMappingChanged()" ) {
         reloadButtonMapping();
     }
 }
 
 void ODevice::init()
 {
 }
 
 /**
 * This method initialises the button mapping
 */
 void ODevice::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     qDebug ( "init Buttons" );
     d->m_buttons = new QValueList <ODeviceButton>;
 
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 ODevice::~ODevice()
 {
 // we leak m_devicebuttons and m_cpu_frequency
 // but it's a singleton and it is not so importantant
 // -zecke
     delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
     return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 /**
 * This method will try to suspend the device
 * It only works if the user is the QWS Server and the apm application
 * is installed.
 * It tries to suspend and then waits some time cause some distributions
 * do have asynchronus apm implementations.
 * This method will either fail and return false or it'll suspend the
 * device and return once the device got woken up
 *
 * @return if the device got suspended
 */
 bool ODevice::suspend()
 {
     qDebug("ODevice::suspend");
     if ( !isQWS( ) ) // only qwsserver is allowed to suspend
         return false;
 
     if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
         return false;
 
     bool res = false;
     ODevice::sendSuspendmsg();
     
     struct timeval tvs, tvn;
     ::gettimeofday ( &tvs, 0 );
 
     ::sync(); // flush fs caches
     res = ( ::system ( "apm --suspend" ) == 0 );
 
     // This is needed because the iPAQ apm implementation is asynchronous and we
     // can not be sure when exactly the device is really suspended
     // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
     if ( res ) {
         do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
             ::usleep ( 200 * 1000 );
             ::gettimeofday ( &tvn, 0 );
         } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
     }
 
     return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 /**
 * This sets the display on or off
 */
 bool ODevice::setDisplayStatus ( bool on )
 {
     qDebug("ODevice::setDisplayStatus(%d)", on);
 
     if ( d->m_model == Model_Unknown )
         return false;
 
     bool res = false;
     int fd;
 
     if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
         res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
         ::close ( fd );
     }
     return res;
 }
 
 /**
 * This sets the display brightness
 *
 * @param p The brightness to be set on a scale from 0 to 255
 * @return success or failure
 */
 bool ODevice::setDisplayBrightness ( int p)
 {
         Q_UNUSED( p )
     return false;
 }
 
 /**
 * @return returns the number of steppings on the brightness slider
 * in the Light-'n-Power settings.
 */
 int ODevice::displayBrightnessResolution() const
 {
     return 16;
 }
 
 /**
 * This sets the display contrast
 * @param p The contrast to be set on a scale from 0 to 255
 * @return success or failure
 */
 bool ODevice::setDisplayContrast ( int p)
 {
         Q_UNUSED( p )
     return false;
 }
 
 /**
 * @return return the max value for the brightness settings slider
 *         or 0 if the device doesn't support setting of a contrast
 */
 int ODevice::displayContrastResolution() const
 {
     return 0;
 }
 
 /**
 * This returns the vendor as string
 * @return Vendor as QString
 */
 QString ODevice::vendorString() const
 {
     return d->m_vendorstr;
 }
 
 /**
 * This returns the vendor as one of the values of OVendor
 * @return OVendor
 */
 OVendor ODevice::vendor() const
 {
     return d->m_vendor;
 }
 
 /**
 * This returns the model as a string
 * @return A string representing the model
 */
 QString ODevice::modelString() const
 {
     return d->m_modelstr;
 }
 
 /**
 * This does return the OModel used
 */
 OModel ODevice::model() const
 {
     return d->m_model;
 }
 
 /**
 * This does return the systen name
 */
 QString ODevice::systemString() const
 {
     return d->m_systemstr;
 }
 
 /**
 * Return System as OSystem value
 */
 OSystem ODevice::system() const
 {
     return d->m_system;
 }
 
 /**
 * @return the version string of the base system
 */
 QString ODevice::systemVersionString() const
 {
     return d->m_sysverstr;
 }
 
diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp
index cc4b01a..8ecea1b 100644
--- a/libopie2/opiecore/device/odevice_ipaq.cpp
+++ b/libopie2/opiecore/device/odevice_ipaq.cpp
@@ -23,385 +23,385 @@
   -_. . .   )=.  =           Library General Public License along with
     --        :-=`           this library; see the file COPYING.LIB.
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 */
 
 #include "odevice_ipaq.h"
 
 /* QT */
 #include <qapplication.h>
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qwindowsystem_qws.h>
 
 /* OPIE */
 #include <qpe/config.h>
 #include <qpe/resource.h>
 #include <qpe/sound.h>
 #include <qpe/qcopenvelope_qws.h>
 
 /* STD */
 #include <fcntl.h>
 #include <math.h>
 #include <stdlib.h>
 #include <signal.h>
 #include <sys/ioctl.h>
 #include <sys/time.h>
 #include <unistd.h>
 #ifndef QT_NO_SOUND
 #include <linux/soundcard.h>
 #endif
 
 /* KERNEL */
 #define OD_IOC(dir,type,number,size)    (( dir << 30 ) | ( type << 8 ) | ( number ) | ( size << 16 ))
 
 #define OD_IO(type,number)              OD_IOC(0,type,number,0)
 #define OD_IOW(type,number,size)        OD_IOC(1,type,number,sizeof(size))
 #define OD_IOR(type,number,size)        OD_IOC(2,type,number,sizeof(size))
 #define OD_IORW(type,number,size)       OD_IOC(3,type,number,sizeof(size))
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
         unsigned char mode;
         unsigned char pwr;
         unsigned char brightness;
 } FLITE_IN;
 
 #define LED_ON    OD_IOW( 'f', 5, LED_IN )
 #define FLITE_ON  OD_IOW( 'f', 7, FLITE_IN )
 
 struct i_button ipaq_buttons [] = {
     { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx,
     Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"),
     "devicebuttons/ipaq_calendar",
     "datebook", "nextView()",
     "today", "raise()" },
     { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx,
     Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"),
     "devicebuttons/ipaq_contact",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx,
     Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
     "devicebuttons/ipaq_menu",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx,
     Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"),
     "devicebuttons/ipaq_mail",
     "mail", "raise()",
     "mail", "newMail()" },
     { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
     "devicebuttons/ipaq_home",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx,
     Qt::Key_F24, QT_TRANSLATE_NOOP("Button", "Record Button"),
     "devicebuttons/ipaq_record",
     "QPE/VMemo", "toggleRecord()",
     "sound", "raise()" },
 };
 
 void iPAQ::init()
 {
     d->m_vendorstr = "HP";
     d->m_vendor = Vendor_HP;
 
     QFile f ( "/proc/hal/model" );
 
     if ( f. open ( IO_ReadOnly )) {
         QTextStream ts ( &f );
 
         d->m_modelstr = "H" + ts. readLine();
 
         if ( d->m_modelstr == "H3100" )
             d->m_model = Model_iPAQ_H31xx;
         else if ( d->m_modelstr == "H3600" )
             d->m_model = Model_iPAQ_H36xx;
         else if ( d->m_modelstr == "H3700" )
             d->m_model = Model_iPAQ_H37xx;
         else if ( d->m_modelstr == "H3800" )
             d->m_model = Model_iPAQ_H38xx;
         else if ( d->m_modelstr == "H3900" )
             d->m_model = Model_iPAQ_H39xx;
         else if ( d->m_modelstr == "H5400" )
             d->m_model = Model_iPAQ_H5xxx;
         else
             d->m_model = Model_Unknown;
 
         f. close();
     }
 
     switch ( d->m_model ) {
         case Model_iPAQ_H31xx:
         case Model_iPAQ_H38xx:
             d->m_rotation = Rot90;
             break;
         case Model_iPAQ_H36xx:
         case Model_iPAQ_H37xx:
         case Model_iPAQ_H39xx:
 
         default:
             d->m_rotation = Rot270;
             break;
         case Model_iPAQ_H5xxx:
             d->m_rotation = Rot0;
         }
 
     f. setName ( "/etc/familiar-version" );
     if ( f. open ( IO_ReadOnly )) {
         d->m_systemstr = "Familiar";
         d->m_system = System_Familiar;
 
         QTextStream ts ( &f );
         d->m_sysverstr = ts. readLine(). mid ( 10 );
 
         f. close();
     } else {
         f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
             d->m_systemstr = "OpenEmbedded/iPaq";
             d->m_system = System_Familiar;
 
             QTextStream ts ( &f );
             ts.setDevice ( &f );
             d->m_sysverstr = ts. readLine();
             f. close();
         }
     }
 
     m_leds [0] = m_leds [1] = Led_Off;
 
     m_power_timer = 0;
 
 }
 
 void iPAQ::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     if ( isQWS( ) )
         QWSServer::setKeyboardFilter ( this );
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
         i_button *ib = ipaq_buttons + i;
         ODeviceButton b;
 
         if (( ib->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( ib->code );
             b. setUserText ( QObject::tr ( "Button", ib->utext ));
             b. setPixmap ( Resource::loadPixmap ( ib->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 QValueList <OLed> iPAQ::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power;
 
     if ( d->m_model == Model_iPAQ_H38xx )
         vl << Led_BlueTooth;
     return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Power )
         vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
     else if ( l == Led_BlueTooth && d->m_model == Model_iPAQ_H38xx )
         vl << Led_Off; // << Led_On << ???
 
     return vl;
 }
 
 OLedState iPAQ::ledState ( OLed l ) const
 {
     switch ( l ) {
         case Led_Power:
             return m_leds [0];
         case Led_BlueTooth:
             return m_leds [1];
         default:
             return Led_Off;
     }
 }
 
 bool iPAQ::setLedState ( OLed l, OLedState st )
 {
     static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK );
 
     if ( l == Led_Power ) {
         if ( fd >= 0 ) {
             LED_IN leds;
             ::memset ( &leds, 0, sizeof( leds ));
             leds. TotalTime  = 0;
             leds. OnTime     = 0;
             leds. OffTime    = 1;
             leds. OffOnBlink = 2;
 
             switch ( st ) {
                 case Led_Off      : leds. OffOnBlink = 0; break;
                 case Led_On       : leds. OffOnBlink = 1; break;
                 case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
                 case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
             }
 
             if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) {
                 m_leds [0] = st;
                 return true;
             }
         }
     }
     return false;
 }
 
 
 bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
     int newkeycode = keycode;
 
     switch ( keycode ) {
         // H38xx/H39xx have no "Q" key anymore - this is now the Mail key
         case HardKey_Menu: {
             if (( d->m_model == Model_iPAQ_H38xx ) ||
                 ( d->m_model == Model_iPAQ_H39xx ) ||
                 ( d->m_model == Model_iPAQ_H5xxx)) {
                 newkeycode = HardKey_Mail;
             }
             break;
         }
 
         // Rotate cursor keys 180° or 270°
         case Key_Left :
         case Key_Right:
         case Key_Up   :
         case Key_Down : {
             if (( d->m_model == Model_iPAQ_H31xx ) ||
                 ( d->m_model == Model_iPAQ_H38xx )) {
                 newkeycode = Key_Left + ( keycode - Key_Left + 2 ) % 4;
             }
             // Rotate the cursor keys by 270°
             // keycode - Key_Left = position of the button starting from left clockwise
             // add the rotation to it and modolo. No we've the original offset
             // add the offset to the Key_Left key
             if ( d-> m_model == Model_iPAQ_H5xxx )
                 newkeycode = Key_Left + ( keycode - Key_Left + 3 ) % 4;
             break;
         }
 
         // map Power Button short/long press to F34/F35
         case Key_SysReq: {
             if ( isPress ) {
                 if ( m_power_timer )
                     killTimer ( m_power_timer );
                 m_power_timer = startTimer ( 500 );
             }
             else if ( m_power_timer ) {
                 killTimer ( m_power_timer );
                 m_power_timer = 0;
                 QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, true, false );
                 QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, false, false );
             }
             newkeycode = Key_unknown;
             break;
         }
     }
 
     if ( newkeycode != keycode ) {
         if ( newkeycode != Key_unknown )
             QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat );
         return true;
     }
     else
         return false;
 }
 
 void iPAQ::timerEvent ( QTimerEvent * )
 {
     killTimer ( m_power_timer );
     m_power_timer = 0;
     QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
     QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void iPAQ::playAlarmSound()
 {
 #ifndef QT_NO_SOUND
     static Sound snd ( "alarm" );
     int fd;
     int vol;
     bool vol_reset = false;
 
     if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
         if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
             Config cfg ( "qpe" );
             cfg. setGroup ( "Volume" );
 
             int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
             if ( volalarm < 0 )
                 volalarm = 0;
             else if ( volalarm > 100 )
                 volalarm = 100;
             volalarm |= ( volalarm << 8 );
 
             if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
                 vol_reset = true;
         }
     }
 
     snd. play();
     while ( !snd. isFinished())
         qApp->processEvents();
 
     if ( fd >= 0 ) {
         if ( vol_reset )
             ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
         ::close ( fd );
     }
 #endif
 }
 
 
 bool iPAQ::setSoftSuspend ( bool soft )
 {
     bool res = false;
     int fd;
 
     if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
         if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
             res = true;
         else
             ::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 
         ::close ( fd );
     }
     else
         ::perror ( "/proc/sys/ts/suspend_button_mode" );
 
     return res;
 }
 
diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp
index 31b9297..90aca2f 100644
--- a/libopie2/opiecore/device/odevice_simpad.cpp
+++ b/libopie2/opiecore/device/odevice_simpad.cpp
@@ -1,384 +1,384 @@
 /*
                      This file is part of the Opie Project
                       Copyright (C) The Opie Team <opie-devel@handhelds.org>
               =.
             .=l.
      .>+-=
 _;:,   .>  :=|.         This program is free software; you can
 .> <`_,  > .  <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--  :           the terms of the GNU Library General Public
 .="- .-=="i,   .._         License as published by the Free Software
 - .  .-<_>   .<>         Foundation; either version 2 of the License,
   ._= =}    :          or (at your option) any later version.
   .%`+i>    _;_.
   .i_,=:_.   -<s.       This program is distributed in the hope that
   + . -:.    =       it will be useful,  but WITHOUT ANY WARRANTY;
   : ..  .:,   . . .    without even the implied warranty of
   =_    +   =;=|`    MERCHANTABILITY or FITNESS FOR A
  _.=:.    :  :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=    =    ;      Library General Public License for more
 ++=  -.   .`   .:       details.
 :   = ...= . :.=-
 -.  .:....=;==+<;          You should have received a copy of the GNU
  -_. . .  )=. =           Library General Public License along with
   --    :-=`           this library; see the file COPYING.LIB.
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 */
 
 #include "odevice_simpad.h"
 
 /* QT */
 #include <qapplication.h>
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qwindowsystem_qws.h>
 
 /* OPIE */
 #include <qpe/config.h>
 #include <qpe/resource.h>
 #include <qpe/sound.h>
 #include <qpe/qcopenvelope_qws.h>
 
 /* STD */
 #include <fcntl.h>
 #include <math.h>
 #include <stdlib.h>
 #include <signal.h>
 #include <sys/ioctl.h>
 #include <sys/time.h>
 #include <unistd.h>
 #ifndef QT_NO_SOUND
 #include <linux/soundcard.h>
 #endif
 
 using namespace Opie;
 
 struct s_button simpad_buttons [] = {
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Lower+Up"),
     "devicebuttons/simpad_lower_up",
     "datebook", "nextView()",
     "today", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Lower+Down"),
     "devicebuttons/simpad_lower_down",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Lower+Right"),
     "devicebuttons/simpad_lower_right",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Lower+Left"),
     "devicebuttons/simpad_lower_left",
     "mail", "raise()",
     "mail", "newMail()" },
 
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F5, QT_TRANSLATE_NOOP("Button", "Upper+Up"),
     "devicebuttons/simpad_upper_up",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F6, QT_TRANSLATE_NOOP("Button", "Upper+Down"),
     "devicebuttons/simpad_upper_down",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F7, QT_TRANSLATE_NOOP("Button", "Upper+Right"),
     "devicebuttons/simpad_upper_right",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Upper+Left"),
     "devicebuttons/simpad_upper_left",
     "QPE/Rotation", "flip()",
     "QPE/Rotation", "flip()" },
     /*
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"),
     "devicebuttons/simpad_lower_upper",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"),
     "devicebuttons/simpad_upper_lower",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     */
 };
 
 void SIMpad::init()
 {
     d->m_vendorstr = "SIEMENS";
     d->m_vendor = Vendor_SIEMENS;
 
     QFile f ( "/proc/hal/model" );
 
     //TODO Implement model checking
     //FIXME For now we assume an SL4
 
     d->m_modelstr = "SL4";
     d->m_model = Model_SIMpad_SL4;
 
     switch ( d->m_model ) {
         default:
             d->m_rotation = Rot0;
             d->m_direction = CCW;
             d->m_holdtime = 1000; // 1000ms
 
             break;
     }
 
     f. setName ( "/etc/familiar-version" );
     if ( f. open ( IO_ReadOnly )) {
         d->m_systemstr = "Familiar";
         d->m_system = System_Familiar;
 
         QTextStream ts ( &f );
         d->m_sysverstr = ts. readLine(). mid ( 10 );
 
         f. close();
     } else {
         f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
             d->m_systemstr = "OpenEmbedded/SIMpad";
             d->m_system = System_OpenZaurus;
 
             QTextStream ts ( &f );
             ts.setDevice ( &f );
             d->m_sysverstr = ts. readLine();
             f. close();
         }
     }
 
     m_leds [0] = m_leds [1] = Led_Off;
 
     m_power_timer = 0;
 
 }
 
 void SIMpad::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     if ( isQWS( ) )
         QWSServer::setKeyboardFilter ( this );
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
         s_button *sb = simpad_buttons + i;
         ODeviceButton b;
 
         if (( sb->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( sb->code );
             b. setUserText ( QObject::tr ( "Button", sb->utext ));
             b. setPixmap ( Resource::loadPixmap ( sb->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
 #define SIMPAD_BACKLIGHT_MASK    0x00a10044
 
 QValueList <OLed> SIMpad::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
     //vl << Led_Mail; //TODO find out if LED1 is accessible anyway
     return vl;
 }
 
 QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Power )  //FIXME which LED is LED2 ? The green one or the amber one?
         vl << Led_Off << Led_On;
     //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
         //vl << Led_Off;
     return vl;
 }
 
 OLedState SIMpad::ledState ( OLed l ) const
 {
     switch ( l ) {
         case Led_Power:
             return m_leds [0];
         //case Led_Mail:
         //	return m_leds [1];
         default:
             return Led_Off;
     }
 }
 
 bool SIMpad::setLedState ( OLed l, OLedState st )
 {
 #if 0
     static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK );
 
             /*TODO Implement this like that:
             read from cs3
             && with SIMPAD_LED2_ON
             write to cs3 */
                 m_leds [0] = st;
                 return true;
             }
         }
     }
 
 #endif
     return false;
 }
 
 
 bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
     //TODO
     return false;
 }
 
 void SIMpad::timerEvent ( QTimerEvent * )
 {
     killTimer ( m_power_timer );
     m_power_timer = 0;
     QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
     QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void SIMpad::playAlarmSound()
 {
 #ifndef QT_NO_SOUND
     static Sound snd ( "alarm" );
     int fd;
     int vol;
     bool vol_reset = false;
 
     if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
         if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
             Config cfg ( "qpe" );
             cfg. setGroup ( "Volume" );
 
             int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
             if ( volalarm < 0 )
                 volalarm = 0;
             else if ( volalarm > 100 )
                 volalarm = 100;
             volalarm |= ( volalarm << 8 );
 
             if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
                 vol_reset = true;
         }
     }
 
     snd. play();
     while ( !snd. isFinished())
         qApp->processEvents();
 
     if ( fd >= 0 ) {
         if ( vol_reset )
             ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
         ::close ( fd );
     }
 #endif
 }
 
 
 bool SIMpad::suspend() // Must override because SIMpad does NOT have apm
 {
     qDebug( "ODevice for SIMpad: suspend()" );
     if ( !isQWS( ) ) // only qwsserver is allowed to suspend
         return false;
 
     bool res = false;
     ODevice::sendSuspendmsg();
 
     struct timeval tvs, tvn;
     ::gettimeofday ( &tvs, 0 );
 
     ::sync(); // flush fs caches
     res = ( ::system ( "cat /dev/fb/0 >/tmp/.buffer; echo > /proc/sys/pm/suspend; cat /tmp/.buffer >/dev/fb/0" ) == 0 ); //TODO make better :)
 
     return res;
 }
 
 
 bool SIMpad::setSoftSuspend ( bool soft )
 {
     qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" );
     return false;
 }
 
 
 bool SIMpad::setDisplayStatus ( bool on )
 {
     qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" );
 
     bool res = false;
     int fd;
 
     QString cmdline = QString().sprintf( "echo %s > /proc/cs3", on ? "0xd41a" : "0xd40a" ); //TODO make better :)
 
     res = ( ::system( (const char*) cmdline ) == 0 );
 
     return res;
 }
 
 
 bool SIMpad::setDisplayBrightness ( int bright )
 {
     qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright );
     bool res = false;
     int fd;
 
     if ( bright > 255 )
         bright = 255;
     if ( bright < 1 )
         bright = 0;
 
     if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
         int value = 255 - bright;
         const int mask = SIMPAD_BACKLIGHT_MASK;
         value = value << 8;
         value += mask;
         char writeCommand[100];
         const int count = sprintf( writeCommand, "0x%x\n", value );
         res = ( ::write ( fd, writeCommand, count ) != -1 );
         ::close ( fd );
     }
     return res;
diff --git a/libopie2/opiecore/device/odevice_yopy.cpp b/libopie2/opiecore/device/odevice_yopy.cpp
index a76f90b..d241db8 100644
--- a/libopie2/opiecore/device/odevice_yopy.cpp
+++ b/libopie2/opiecore/device/odevice_yopy.cpp
@@ -1,163 +1,163 @@
 /*
                             This file is part of the Opie Project
                             Copyright (C) The Opie Team <opie-devel@handhelds.org>
              =.
            .=l.
           .>+-=
 _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
 - .   .-<_>     .<>         Foundation; either version 2 of the License,
     ._= =}       :          or (at your option) any later version.
    .%`+i>       _;_.
    .i_,=:_.      -<s.       This program is distributed in the hope that
     +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
    : ..    .:,     . . .    without even the implied warranty of
    =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
  _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=       =       ;      Library General Public License for more
 ++=   -.     .`     .:       details.
 :     =  ...= . :.=-
 -.   .:....=;==+<;          You should have received a copy of the GNU
  -_. . .   )=.  =           Library General Public License along with
    --        :-=`           this library; see the file COPYING.LIB.
                             If not, write to the Free Software Foundation,
                             Inc., 59 Temple Place - Suite 330,
                             Boston, MA 02111-1307, USA.
 */
 
 #include "odevice_yopy.h"
 
 /* QT */
 #include <qapplication.h>
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qwindowsystem_qws.h>
 
 /* OPIE */
 #include <qpe/config.h>
 #include <qpe/resource.h>
 #include <qpe/sound.h>
 #include <qpe/qcopenvelope_qws.h>
 
 /* STD */
 #include <fcntl.h>
 #include <math.h>
 #include <stdlib.h>
 #include <signal.h>
 #include <sys/ioctl.h>
 #include <sys/time.h>
 #include <unistd.h>
 #ifndef QT_NO_SOUND
 #include <linux/soundcard.h>
 #endif
 
 using namespace Opie;
 
 struct yopy_button yopy_buttons [] = {
     { Qt::Key_F10, QT_TRANSLATE_NOOP( "Button", "Action Button" ),
         "devicebuttons/yopy_action",
         "datebook", "nextView()",
         "today", "raise()" },
     { Qt::Key_F11, QT_TRANSLATE_NOOP( "Button", "OK Button" ),
         "devicebuttons/yopy_ok",
         "addressbook", "raise()",
         "addressbook", "beamBusinessCard()" },
     { Qt::Key_F12, QT_TRANSLATE_NOOP( "Button", "End Button" ),
         "devicebuttons/yopy_end",
         "QPE/Launcher", "home()",
         "buttonsettings", "raise()" },
 };
 
 void Yopy::init()
 {
     d->m_vendorstr = "G.Mate";
     d->m_vendor = Vendor_GMate;
     d->m_modelstr = "Yopy3700";
     d->m_model = Model_Yopy_3700;
     d->m_rotation = Rot0;
 
     d->m_systemstr = "Linupy";
     d->m_system = System_Linupy;
 
     QFile f ( "/etc/issue" );
     if ( f. open ( IO_ReadOnly ) )
     {
         QTextStream ts ( &f );
         ts.readLine();
         d->m_sysverstr = ts. readLine();
         f. close();
     }
 }
 
 
 void Yopy::initButtons()
 {
     if ( d->m_buttons )
         return ;
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof( yopy_button ) ); i++ )
     {
 
         yopy_button *ib = yopy_buttons + i;
 
         ODeviceButton b;
 
         b. setKeycode ( ib->code );
         b. setUserText ( QObject::tr ( "Button", ib->utext ) );
         b. setPixmap ( Resource::loadPixmap ( ib->pix ) );
         b. setFactoryPresetPressedAction
         ( OQCopMessage( makeChannel( ib->fpressedservice ), ib->fpressedaction ) );
         b. setFactoryPresetHeldAction
         ( OQCopMessage( makeChannel( ib->fheldservice ), ib->fheldaction ) );
 
         d->m_buttons->append ( b );
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel( "QPE/System", this );
-    connect( sysch, SIGNAL( received( const QCString &, const QByteArray & ) ),
-             this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) );
+    connect( sysch, SIGNAL( received(const QCString&,const QByteArray&) ),
+             this, SLOT( systemMessage(const QCString&,const QByteArray&) ) );
 }
 
 
 bool Yopy::suspend()
 {
     /* Opie for Yopy does not implement its own power management at the
         moment.  The public version runs parallel to X, and relies on the
         existing power management features. */
     return false;
 }
 
 
 bool Yopy::setDisplayBrightness( int bright )
 {
     /* The code here works, but is disabled as the current version runs
         parallel to X, and relies on the existing backlight demon. */
 #if 0
     if ( QFile::exists( "/proc/sys/pm/light" ) )
     {
         int fd = ::open( "/proc/sys/pm/light", O_WRONLY );
         if ( fd >= 0 )
         {
             if ( bright )
                 ::write( fd, "1\n", 2 );
             else
                 ::write( fd, "0\n", 2 );
             ::close( fd );
             return true;
         }
     }
 #endif
     return false;
 }
 
 
 int Yopy::displayBrightnessResolution() const
 {
     return 2;
 }
 
diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp
index 9d23a12..8ab3cbe 100644
--- a/libopie2/opiecore/device/odevice_zaurus.cpp
+++ b/libopie2/opiecore/device/odevice_zaurus.cpp
@@ -63,386 +63,386 @@ struct z_button z_buttons [] = {
     { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"),
     "devicebuttons/z_contact",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
     "devicebuttons/z_home",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
     "devicebuttons/z_menu",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"),
     "devicebuttons/z_mail",
     "mail", "raise()",
     "mail", "newMail()" },
 };
 
 struct z_button z_buttons_c700 [] = {
     { Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"),
     "devicebuttons/z_calendar",
     "datebook", "nextView()",
     "today", "raise()" },
     { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"),
     "devicebuttons/z_contact",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
     "devicebuttons/z_home",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
     "devicebuttons/z_menu",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Qt::Key_F14, QT_TRANSLATE_NOOP("Button", "Display Rotate"),
     "devicebuttons/z_hinge",
     "QPE/Rotation", "rotateDefault()",
     "QPE/Dummy", "doNothing()" },
 };
 
 // FIXME This gets unnecessary complicated. We should think about splitting the Zaurus
 //       class up into individual classes. We need three classes
 //
 //       Zaurus-Collie (SA-model  w/ 320x240 lcd, for SL5500 and SL5000)
 //       Zaurus-Poodle (PXA-model w/ 320x240 lcd, for SL5600)
 //       Zaurus-Corgi  (PXA-model w/ 640x480 lcd, for C700, C750, C760, and C860)
 //
 //       Only question right now is: Do we really need to do it? Because as soon
 //       as the OpenZaurus kernel is ready, there will be a unified interface for all
 //       Zaurus models (concerning apm, backlight, buttons, etc.)
 //
 //       Comments? - mickeyl.
 
 void Zaurus::init()
 {
     d->m_vendorstr = "Sharp";
     d->m_vendor = Vendor_Sharp;
     m_embedix = true;  // Not openzaurus means: It has an embedix kernel !
 
     // QFile f ( "/proc/filesystems" );
     QString model;
 
     // It isn't a good idea to check the system configuration to
     // detect the distribution !
     // Otherwise it may happen that any other distribution is detected as openzaurus, just
     // because it uses a jffs2 filesystem..
     // (eilers)
     // if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read(). find ( "\tjffs2\n" ) >= 0 )) {
     QFile f ("/etc/oz_version");
     if ( f.exists() ){
         d->m_vendorstr = "OpenZaurus Team";
         d->m_systemstr = "OpenZaurus";
         d->m_system = System_OpenZaurus;
 
         if ( f. open ( IO_ReadOnly )) {
             QTextStream ts ( &f );
             d->m_sysverstr = ts. readLine();//. mid ( 10 );
             f. close();
         }
 
         // Openzaurus sometimes uses the embedix kernel!
         // => Check whether this is an embedix kernel
         FILE *uname = popen("uname -r", "r");
         QString line;
         if ( f.open(IO_ReadOnly, uname) ) {
             QTextStream ts ( &f );
             line = ts. readLine();
             int loc = line. find ( "embedix" );
             if ( loc != -1 )
                 m_embedix = true;
             else
                 m_embedix = false;
             f. close();
         }
         pclose(uname);
     }
     else {
         d->m_systemstr = "Zaurus";
         d->m_system = System_Zaurus;
     }
 
     f. setName ( "/proc/cpuinfo" );
     if ( f. open ( IO_ReadOnly ) ) {
         QTextStream ts ( &f );
         QString line;
         while( line = ts. readLine() ) {
             if ( line. left ( 8 ) == "Hardware" )
                 break;
         }
         int loc = line. find ( ":" );
         if ( loc != -1 )
             model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
     }
 
     if ( model == "SHARP Corgi" ) {
         d->m_model = Model_Zaurus_SLC7x0;
         d->m_modelstr = "Zaurus SL-C700";
     } else if ( model == "SHARP Shepherd" ) {
         d->m_model = Model_Zaurus_SLC7x0;
         d->m_modelstr = "Zaurus SL-C750";
     } else if ( model == "SHARP Husky" ) {
         d->m_model = Model_Zaurus_SLC7x0;
         d->m_modelstr = "Zaurus SL-C760";
     } else if ( model == "SHARP Poodle" ) {
         d->m_model = Model_Zaurus_SLB600;
         d->m_modelstr = "Zaurus SL-B500 or SL-5600";
     } else if ( model == "Sharp-Collie" || model == "Collie" ) {
         d->m_model = Model_Zaurus_SL5500;
         d->m_modelstr = "Zaurus SL-5500 or SL-5000d";
     } else {
         d->m_model = Model_Zaurus_SL5500;
         d->m_modelstr = "Zaurus (Model unknown)";
     }
 
     bool flipstate = false;
     switch ( d->m_model ) {
         case Model_Zaurus_SLA300:
             d->m_rotation = Rot0;
             break;
         case Model_Zaurus_SLC7x0:
             d->m_rotation = rotation();
             d->m_direction = direction();
             break;
         case Model_Zaurus_SLB600:
         case Model_Zaurus_SL5500:
         case Model_Zaurus_SL5000:
         default:
             d->m_rotation = Rot270;
             break;
     }
     m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     struct z_button * pz_buttons;
     int buttoncount;
     switch ( d->m_model ) {
         case Model_Zaurus_SLC7x0:
             pz_buttons = z_buttons_c700;
             buttoncount = ARRAY_SIZE(z_buttons_c700);
             break;
         default:
             pz_buttons = z_buttons;
             buttoncount = ARRAY_SIZE(z_buttons);
             break;
     }
 
     for ( int i = 0; i < buttoncount; i++ ) {
         struct z_button *zb = pz_buttons + i;
         ODeviceButton b;
 
         b. setKeycode ( zb->code );
         b. setUserText ( QObject::tr ( "Button", zb->utext ));
         b. setPixmap ( Resource::loadPixmap ( zb->pix ));
         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb->fpressedservice ),
                                 zb->fpressedaction ));
         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb->fheldservice ),
                                 zb->fheldaction ));
 
         d->m_buttons->append ( b );
     }
 
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )),
-        this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)),
+        this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
 #define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
 //#define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
 #define	SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)
 
 #define  SHARP_IOCTL_GET_ROTATION 0x413c
 
 typedef struct sharp_led_status {
 int which;   /* select which LED status is wanted. */
 int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 #define SHARP_LED_MAIL_EXISTS  9       /* mail status (exists or not) */
 
 #define LED_MAIL_NO_UNREAD_MAIL  0   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_NEWMAIL_EXISTS  1   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_UNREAD_MAIL_EX  2   /* for SHARP_LED_MAIL_EXISTS */
 
 // #include <asm/sharp_apm.h> // including kernel headers is evil ...
 
 #define APM_IOCGEVTSRC          OD_IOR( 'A', 203, int )
 #define APM_IOCSEVTSRC          OD_IORW( 'A', 204, int )
 #define APM_EVT_POWER_BUTTON    (1 << 0)
 
 #define FL_IOCTL_STEP_CONTRAST    100
 
 
 void Zaurus::buzzer ( int sound )
 {
 #ifndef QT_NO_SOUND
     QString soundname;
 
     // Not all devices have real sound
     if ( d->m_model == Model_Zaurus_SLC7x0
         || d->m_model == Model_Zaurus_SLB600 ){
 
         switch ( sound ){
         case SHARP_BUZ_SCHEDULE_ALARM:
             soundname = "alarm";
             break;
         case SHARP_BUZ_TOUCHSOUND:
             soundname = "touchsound";
             break;
         case SHARP_BUZ_KEYSOUND:
             soundname = "keysound";
             break;
         default:
             soundname = "alarm";
 
         }
     }
 
     // If a soundname is defined, we expect that this device has
     // sound capabilities.. Otherwise we expect to have the buzzer
     // device..
     if ( !soundname.isEmpty() ){
         int fd;
         int vol;
         bool vol_reset = false;
 
         Sound snd ( soundname );
 
         if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
             if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
                 Config cfg ( "qpe" );
                 cfg. setGroup ( "Volume" );
 
                 int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
                 if ( volalarm < 0 )
                     volalarm = 0;
                 else if ( volalarm > 100 )
                     volalarm = 100;
                 volalarm |= ( volalarm << 8 );
 
                 if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
                     vol_reset = true;
             }
         }
 
         snd. play();
         while ( !snd. isFinished())
             qApp->processEvents();
 
         if ( fd >= 0 ) {
             if ( vol_reset )
                 ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
             ::close ( fd );
         }
     } else {		
         int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK );
 
         if ( fd >= 0 ) {
             ::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
             ::close ( fd );
         }
 
     } 
 #endif
 }
 
 
 void Zaurus::playAlarmSound()
 {
     buzzer ( SHARP_BUZ_SCHEDULE_ALARM );
 }
 
 void Zaurus::playTouchSound()
 {
     buzzer ( SHARP_BUZ_TOUCHSOUND );
 }
 
 void Zaurus::playKeySound()
 {
     buzzer ( SHARP_BUZ_KEYSOUND );
 }
 
 
 QValueList <OLed> Zaurus::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Mail;
     return vl;
 }
 
 QValueList <OLedState> Zaurus::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Mail )
         vl << Led_Off << Led_On << Led_BlinkSlow;
     return vl;
 }
 
 OLedState Zaurus::ledState ( OLed which ) const
 {
     if ( which == Led_Mail )
         return m_leds [0];
     else
         return Led_Off;
 }
 
 bool Zaurus::setLedState ( OLed which, OLedState st )
 {
     if (!m_embedix) // Currently not supported on non_embedix kernels
         return false;
 
     static int fd = ::open ( "/dev/sharp_led", O_RDWR|O_NONBLOCK );
 
diff --git a/libopie2/opiecore/oprocess.cpp b/libopie2/opiecore/oprocess.cpp
index 0a361a1..6349c83 100644
--- a/libopie2/opiecore/oprocess.cpp
+++ b/libopie2/opiecore/oprocess.cpp
@@ -483,406 +483,406 @@ void OProcess::flushStdin ( )
     do
     {
         d1 = input_total - input_sent;
         slotSendData ( 0 );
         d2 = input_total - input_sent;
     }
     while ( d2 <= d1 );
 }
 
 void OProcess::suspend()
 {
     if ( ( communication & Stdout ) && outnot )
         outnot->setEnabled( false );
 }
 
 void OProcess::resume()
 {
     if ( ( communication & Stdout ) && outnot )
         outnot->setEnabled( true );
 }
 
 bool OProcess::closeStdin()
 {
     bool rv;
 
     if ( communication & Stdin )
     {
         communication = ( Communication ) ( communication & ~Stdin );
         delete innot;
         innot = 0;
         close( in[ 1 ] );
         rv = true;
     }
     else
         rv = false;
     return rv;
 }
 
 bool OProcess::closeStdout()
 {
     bool rv;
 
     if ( communication & Stdout )
     {
         communication = ( Communication ) ( communication & ~Stdout );
         delete outnot;
         outnot = 0;
         close( out[ 0 ] );
         rv = true;
     }
     else
         rv = false;
     return rv;
 }
 
 bool OProcess::closeStderr()
 {
     bool rv;
 
     if ( communication & Stderr )
     {
         communication = static_cast<Communication>( communication & ~Stderr );
         delete errnot;
         errnot = 0;
         close( err[ 0 ] );
         rv = true;
     }
     else
         rv = false;
     return rv;
 }
 
 void OProcess::slotChildOutput( int fdno )
 {
     if ( !childOutput( fdno ) )
         closeStdout();
 }
 
 void OProcess::slotChildError( int fdno )
 {
     if ( !childError( fdno ) )
         closeStderr();
 }
 
 void OProcess::slotSendData( int )
 {
     if ( input_sent == input_total )
     {
         innot->setEnabled( false );
         input_data = 0;
         emit wroteStdin( this );
     }
     else
         input_sent += ::write( in[ 1 ], input_data + input_sent, input_total - input_sent );
 }
 
 void OProcess::processHasExited( int state )
 {
     if ( runs )
     {
         runs = false;
         status = state;
 
         commClose(); // cleanup communication sockets
 
         // also emit a signal if the process was run Blocking
         if ( DontCare != run_mode )
         {
             emit processExited( this );
         }
     }
 }
 
 int OProcess::childOutput( int fdno )
 {
     if ( communication & NoRead )
     {
         int len = -1;
         emit receivedStdout( fdno, len );
         errno = 0; // Make sure errno doesn't read "EAGAIN"
         return len;
     }
     else
     {
         char buffer[ 1024 ];
         int len;
 
         len = ::read( fdno, buffer, 1024 );
 
         if ( 0 < len )
         {
             emit receivedStdout( this, buffer, len );
         }
         return len;
     }
 }
 
 int OProcess::childError( int fdno )
 {
     char buffer[ 1024 ];
     int len;
 
     len = ::read( fdno, buffer, 1024 );
 
     if ( 0 < len )
         emit receivedStderr( this, buffer, len );
     return len;
 }
 
 int OProcess::setupCommunication( Communication comm )
 {
     int ok;
 
     communication = comm;
 
     ok = 1;
     if ( comm & Stdin )
         ok &= socketpair( AF_UNIX, SOCK_STREAM, 0, in ) >= 0;
 
     if ( comm & Stdout )
         ok &= socketpair( AF_UNIX, SOCK_STREAM, 0, out ) >= 0;
 
     if ( comm & Stderr )
         ok &= socketpair( AF_UNIX, SOCK_STREAM, 0, err ) >= 0;
 
     return ok;
 }
 
 int OProcess::commSetupDoneP()
 {
     int ok = 1;
 
     if ( communication != NoCommunication )
     {
         if ( communication & Stdin )
             close( in[ 0 ] );
         if ( communication & Stdout )
             close( out[ 1 ] );
         if ( communication & Stderr )
             close( err[ 1 ] );
 
         // Don't create socket notifiers and set the sockets non-blocking if
         // blocking is requested.
         if ( run_mode == Block )
             return ok;
 
         if ( communication & Stdin )
         {
             //        ok &= (-1 != fcntl(in[1], F_SETFL, O_NONBLOCK));
             innot = new QSocketNotifier( in[ 1 ], QSocketNotifier::Write, this );
             CHECK_PTR( innot );
             innot->setEnabled( false ); // will be enabled when data has to be sent
-            QObject::connect( innot, SIGNAL( activated( int ) ),
-                              this, SLOT( slotSendData( int ) ) );
+            QObject::connect( innot, SIGNAL( activated(int) ),
+                              this, SLOT( slotSendData(int) ) );
         }
 
         if ( communication & Stdout )
         {
             //        ok &= (-1 != fcntl(out[0], F_SETFL, O_NONBLOCK));
             outnot = new QSocketNotifier( out[ 0 ], QSocketNotifier::Read, this );
             CHECK_PTR( outnot );
-            QObject::connect( outnot, SIGNAL( activated( int ) ),
-                              this, SLOT( slotChildOutput( int ) ) );
+            QObject::connect( outnot, SIGNAL( activated(int) ),
+                              this, SLOT( slotChildOutput(int) ) );
             if ( communication & NoRead )
                 suspend();
         }
 
         if ( communication & Stderr )
         {
             //        ok &= (-1 != fcntl(err[0], F_SETFL, O_NONBLOCK));
             errnot = new QSocketNotifier( err[ 0 ], QSocketNotifier::Read, this );
             CHECK_PTR( errnot );
-            QObject::connect( errnot, SIGNAL( activated( int ) ),
-                              this, SLOT( slotChildError( int ) ) );
+            QObject::connect( errnot, SIGNAL( activated(int) ),
+                              this, SLOT( slotChildError(int) ) );
         }
     }
     return ok;
 }
 
 int OProcess::commSetupDoneC()
 {
     int ok = 1;
     struct linger so;
     memset( &so, 0, sizeof( so ) );
 
     if ( communication & Stdin )
         close( in[ 1 ] );
     if ( communication & Stdout )
         close( out[ 0 ] );
     if ( communication & Stderr )
         close( err[ 0 ] );
 
     if ( communication & Stdin )
         ok &= dup2( in[ 0 ], STDIN_FILENO ) != -1;
     else
     {
         int null_fd = open( "/dev/null", O_RDONLY );
         ok &= dup2( null_fd, STDIN_FILENO ) != -1;
         close( null_fd );
     }
     if ( communication & Stdout )
     {
         ok &= dup2( out[ 1 ], STDOUT_FILENO ) != -1;
         ok &= !setsockopt( out[ 1 ], SOL_SOCKET, SO_LINGER, ( char* ) & so, sizeof( so ) );
     }
     else
     {
         int null_fd = open( "/dev/null", O_WRONLY );
         ok &= dup2( null_fd, STDOUT_FILENO ) != -1;
         close( null_fd );
     }
     if ( communication & Stderr )
     {
         ok &= dup2( err[ 1 ], STDERR_FILENO ) != -1;
         ok &= !setsockopt( err[ 1 ], SOL_SOCKET, SO_LINGER, reinterpret_cast<char *>( &so ), sizeof( so ) );
     }
     else
     {
         int null_fd = open( "/dev/null", O_WRONLY );
         ok &= dup2( null_fd, STDERR_FILENO ) != -1;
         close( null_fd );
     }
     return ok;
 }
 
 void OProcess::commClose()
 {
     if ( NoCommunication != communication )
     {
         bool b_in = ( communication & Stdin );
         bool b_out = ( communication & Stdout );
         bool b_err = ( communication & Stderr );
         if ( b_in )
             delete innot;
 
         if ( b_out || b_err )
         {
             // If both channels are being read we need to make sure that one socket buffer
             // doesn't fill up whilst we are waiting for data on the other (causing a deadlock).
             // Hence we need to use select.
 
             // Once one or other of the channels has reached EOF (or given an error) go back
             // to the usual mechanism.
 
             int fds_ready = 1;
             fd_set rfds;
 
             int max_fd = 0;
             if ( b_out )
             {
                 fcntl( out[ 0 ], F_SETFL, O_NONBLOCK );
                 if ( out[ 0 ] > max_fd )
                     max_fd = out[ 0 ];
                 delete outnot;
                 outnot = 0;
             }
             if ( b_err )
             {
                 fcntl( err[ 0 ], F_SETFL, O_NONBLOCK );
                 if ( err[ 0 ] > max_fd )
                     max_fd = err[ 0 ];
                 delete errnot;
                 errnot = 0;
             }
 
 
             while ( b_out || b_err )
             {
                 // * If the process is still running we block until we
                 // receive data. (p_timeout = 0, no timeout)
                 // * If the process has already exited, we only check
                 // the available data, we don't wait for more.
                 // (p_timeout = &timeout, timeout immediately)
                 struct timeval timeout;
                 timeout.tv_sec = 0;
                 timeout.tv_usec = 0;
                 struct timeval *p_timeout = runs ? 0 : &timeout;
 
                 FD_ZERO( &rfds );
                 if ( b_out )
                     FD_SET( out[ 0 ], &rfds );
 
                 if ( b_err )
                     FD_SET( err[ 0 ], &rfds );
 
                 fds_ready = select( max_fd + 1, &rfds, 0, 0, p_timeout );
                 if ( fds_ready <= 0 )
                     break;
 
                 if ( b_out && FD_ISSET( out[ 0 ], &rfds ) )
                 {
                     int ret = 1;
                     while ( ret > 0 )
                         ret = childOutput( out[ 0 ] );
                     if ( ( ret == -1 && errno != EAGAIN ) || ret == 0 )
                         b_out = false;
                 }
 
                 if ( b_err && FD_ISSET( err[ 0 ], &rfds ) )
                 {
                     int ret = 1;
                     while ( ret > 0 )
                         ret = childError( err[ 0 ] );
                     if ( ( ret == -1 && errno != EAGAIN ) || ret == 0 )
                         b_err = false;
                 }
             }
         }
 
         if ( b_in )
         {
             communication = ( Communication ) ( communication & ~Stdin );
             close( in[ 1 ] );
         }
         if ( b_out )
         {
             communication = ( Communication ) ( communication & ~Stdout );
             close( out[ 0 ] );
         }
         if ( b_err )
         {
             communication = ( Communication ) ( communication & ~Stderr );
             close( err[ 0 ] );
         }
     }
 }
 
 void OProcess::setUseShell( bool useShell, const char *shell )
 {
     if ( !d )
         d = new OProcessPrivate;
     d->useShell = useShell;
     d->shell = shell;
     if ( d->shell.isEmpty() )
         d->shell = searchShell();
 }
 
 QString OProcess::quote( const QString &arg )
 {
     QString res = arg;
     res.replace( QRegExp( QString::fromLatin1( "\'" ) ),
                  QString::fromLatin1( "'\"'\"'" ) );
     res.prepend( '\'' );
     res.append( '\'' );
     return res;
 }
 
 QCString OProcess::searchShell()
 {
     QCString tmpShell = QCString( getenv( "SHELL" ) ).stripWhiteSpace();
     if ( !isExecutable( tmpShell ) )
     {
         tmpShell = "/bin/sh";
     }
 
     return tmpShell;
 }
 
 bool OProcess::isExecutable( const QCString &filename )
 {
     struct stat fileinfo;
 
     if ( filename.isEmpty() )
         return false;
 
     // CC: we've got a valid filename, now let's see whether we can execute that file