fix a problem in the c7x0 backlight handling...

Bah! Got confused by the input interval for ODevice::setDisplayBrightness()
(once) again - it has been ridiculous to scale that down from [0-255] to the actual
interval since the day we invented ODevice::displayBrightnessResolution().
I'm going to remove that antique cruft soon.

1 files changed, 14 insertions, 12 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index bc09e92..82a0099 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -1542,59 +1542,59 @@ bool Zaurus::isZaurus()
 	bool is_zaurus = false;
 	QFile f ( "/proc/cpuinfo" );
 	if ( f. open ( IO_ReadOnly ) ) {
 		QString model;
 		QFile f ( "/proc/cpuinfo" );
 
   		QTextStream ts ( &f );
   		QString line;
   		while( line = ts. readLine ( ) ) {
   			if ( line. left ( 8 ) == "Hardware" )
   				break;
   		}
   		int loc = line. find ( ":" );
   		if ( loc != -1 )
   			model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
 
-		if ( model == "Sharp-Collie" 
-		     || model == "Collie" 
+		if ( model == "Sharp-Collie"
+		     || model == "Collie"
 		     || model == "SHARP Corgi"
-		     || model == "SHARP Shepherd" 
-		     || model == "SHARP Poodle" 
+		     || model == "SHARP Shepherd"
+		     || model == "SHARP Poodle"
                      || model == "SHARP Husky"
 		   )
 			is_zaurus = true;
 
   	}
 	return is_zaurus;
 }
 
 
 void Zaurus::init ( )
 {
 	d-> m_vendorstr = "Sharp";
 	d-> m_vendor = Vendor_Sharp;
 	m_embedix = true;  // Not openzaurus means: It has an embedix kernel !
 
 	// QFile f ( "/proc/filesystems" );
 	QString model;
 
-	// It isn't a good idea to check the system configuration to 
-	// detect the distribution ! 
+	// It isn't a good idea to check the system configuration to
+	// detect the distribution !
 	// Otherwise it may happen that any other distribution is detected as openzaurus, just
-	// because it uses a jffs2 filesystem..  
+	// because it uses a jffs2 filesystem..
 	// (eilers)
 	// if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
 	QFile f ("/etc/oz_version");
 	if ( f.exists() ){
 		d-> m_vendorstr = "OpenZaurus Team";
 		d-> m_systemstr = "OpenZaurus";
 		d-> m_system = System_OpenZaurus;
 
 		if ( f. open ( IO_ReadOnly )) {
 			QTextStream ts ( &f );
 			d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
 			f. close ( );
 		}
 
 		// Openzaurus sometimes uses the embedix kernel!
 		// => Check whether this is an embedix kernel
@@ -1683,44 +1683,44 @@ void Zaurus::initButtons ( )
 			pz_buttons = z_buttons_c700;
 			buttoncount = ARRAY_SIZE(z_buttons_c700);
 			break;
 		default:
 			pz_buttons = z_buttons;
 			buttoncount = ARRAY_SIZE(z_buttons);
 			break;
 	}
 
 	for ( int i = 0; i < buttoncount; i++ ) {
 		struct z_button *zb = pz_buttons + i;
 		ODeviceButton b;
 
 		b. setKeycode ( zb-> code );
 		b. setUserText ( QObject::tr ( "Button", zb-> utext ));
 		b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
-		b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), 
+		b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ),
 								  zb-> fpressedaction ));
-		b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), 
+		b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ),
 							       zb-> fheldaction ));
 
 		d-> m_buttons-> append ( b );
 	}
 
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), 
+	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )),
 		  this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
 #define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
@@ -1951,48 +1951,50 @@ bool Zaurus::setSoftSuspend ( bool soft )
 				perror ( "APM_IOCGEVTSRC" );
 		}
 		else
 			perror ( "APM_IOCGEVTSRC" );
 
 		::close ( fd );
 	}
 	else
 		perror ( "/dev/apm_bios or /dev/misc/apm_bios" );
 
     return res;
 }
 
 
 bool Zaurus::setDisplayBrightness ( int bright )
 {
+    //qDebug( "Zaurus::setDisplayBrightness( %d )", bright );
     bool res = false;
     int fd;
 
     if ( bright > 255 ) bright = 255;
     if ( bright < 0 ) bright = 0;
 
     if ( m_embedix )
     {
         if ( d->m_model == Model_Zaurus_SLC7x0 )
         {
+            //qDebug( "using special treatment for devices with the corgi backlight interface" );
             // special treatment for devices with the corgi backlight interface
             if (( fd = ::open ( "/proc/driver/fl/corgi-bl", O_WRONLY )) >= 0 )
             {
-                if ( bright > 0x11 ) bright = 0x11;
+                int value = ( bright == 1 ) ? 1 : bright * ( 17.0 / 255.0 );
                 char writeCommand[100];
-                const int count = sprintf( writeCommand, "0x%x\n", bright );
+                const int count = sprintf( writeCommand, "0x%x\n", value );
                 res = ( ::write ( fd, writeCommand, count ) != -1 );
                 ::close ( fd );
             }
             return res;
         }
         else
         {
             // standard treatment for devices with the dumb embedix frontlight interface
             if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
                 int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
                 if ( bright && !bl )
                     bl = 1;
                 res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
                 ::close ( fd );
             }
         }