Auto connect on Locale Console again!

MyPty test if cmd is available(exists) and then
either use /bin/bash or /bin/sh
ConsoleConfigWidget added a comment about the expected behaviour

3 files changed, 25 insertions, 5 deletions

diff --git a/noncore/apps/opie-console/MyPty.cpp b/noncore/apps/opie-console/MyPty.cpp
index b0f0275..c3c58be 100644
--- a/noncore/apps/opie-console/MyPty.cpp
+++ b/noncore/apps/opie-console/MyPty.cpp
@@ -270,49 +270,64 @@ MyPty::MyPty(const Profile& prof) : m_cpid(0)
 */
 MyPty::~MyPty()
 {
     donePty();
 }
 QString MyPty::identifier()const {
     return QString::fromLatin1("term");
 }
 QString MyPty::name()const{
     return identifier();
 }
 bool MyPty::open() {
     if (m_fd < 0)
         m_fd = openPty();
 
     start();
     return true;
 }
 void MyPty::close() {
     donePty();
     m_fd = openPty();
 }
 void MyPty::reload( const Profile& prof) {
     m_env.clear();
-    m_cmd = prof.readEntry("Command", "/bin/bash");
+    m_cmd = prof.readEntry("Command", "/bin/sh");
+
+    /*
+     * Lets check if m_cmd actually
+     * exists....
+     * we try to use bin/bash and if
+     * this fails we
+     * will fallback to /bin/sh
+     * which should be there 100%
+     */
+    if ( !QFile::exists(QFile::encodeName(m_cmd) ) )
+        if (QFile::exists("/bin/bash") )
+            m_cmd = "/bin/bash";
+        else
+            m_cmd = "/bin/sh";
+
     int envcount = prof.readNumEntry("EnvVars", 0);
     for (int i=0; i<envcount; i++) {
         QString name = prof.readEntry("Env_Name_" + QString::number(i), "");
         QString value = prof.readEntry("Env_Value_" + QString::number(i), "");
         if (!(name.isEmpty() || value.isEmpty())) {
             m_env.insert(name, value);
         }
     }
 }
 /*! sends len bytes through the line */
 void MyPty::send(const QByteArray& ar)
 {
 #ifdef VERBOSE_DEBUG
   // verbose debug
   printf("sending bytes:\n");
   for (uint i = 0; i < ar.count(); i++)
     printf("%c", ar[i]);
   printf("\n");
 #endif
 
   ::write(m_fd, ar.data(), ar.count());
 }
 
 /*! indicates that a block of data is received */
diff --git a/noncore/apps/opie-console/consoleconfigwidget.cpp b/noncore/apps/opie-console/consoleconfigwidget.cpp
index 70e2e78..3f2d154 100644
--- a/noncore/apps/opie-console/consoleconfigwidget.cpp
+++ b/noncore/apps/opie-console/consoleconfigwidget.cpp
@@ -3,90 +3,95 @@
 #include <qcombobox.h>
 #include <qlineedit.h>
 #include <qpushbutton.h>
 #include <qlistview.h>
 #include <qhbox.h>
 #include <qregexp.h>
 #include <stdio.h>
 
 #include "consoleconfigwidget.h"
 
 ConsoleConfigWidget::ConsoleConfigWidget( const QString& name, QWidget* parent,
                                 const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
     m_lay = new QVBoxLayout( this );
     QLabel *label = new QLabel(tr("Command to execute"), this);
     m_lay->addWidget(label);
     m_cmd = new QLineEdit(this);
     m_lay->addWidget(m_cmd);
     label = new QLabel(tr("Environment Variables"), this);
     m_lay->addWidget(label);
     m_env = new QListView(this);
     m_env->addColumn(tr("Name"));
     m_env->addColumn(tr("Value"));
     m_lay->addWidget(m_env);
-    
+
     QHBox *hbox = new QHBox(this);
     label = new QLabel(tr("Name :"), hbox);
     m_name = new QLineEdit(hbox);
     m_lay->addWidget(hbox);
 
     hbox = new QHBox(this);
     label = new QLabel(tr("Value :"), hbox);
     m_value = new QLineEdit(hbox);
     m_lay->addWidget(hbox);
-    
+
     hbox = new QHBox(this);
     hbox->setSpacing(10);
     m_remove = new QPushButton(tr("Remove"), hbox);
     connect(m_remove, SIGNAL(clicked()), this, SLOT(slotRemove()));
     m_add = new QPushButton(tr("Add"), hbox);
     connect(m_add, SIGNAL(clicked()), this, SLOT(slotAdd()));
     m_lay->addWidget(hbox);
 }
 
 void ConsoleConfigWidget::slotAdd() {
     if (!(m_name->text().isEmpty() || m_value->text().isEmpty())) {
         QListViewItem *item = new QListViewItem(m_env);
         item->setText(0, m_name->text());
         item->setText(1, m_value->text());
         m_env->insertItem(item);
     }
 }
 
 void ConsoleConfigWidget::slotRemove() {
     QListViewItem *item = m_env->currentItem();
     if (item) {
         m_env->takeItem(item);
     }
 }
 
 ConsoleConfigWidget::~ConsoleConfigWidget() {
 }
 
 void ConsoleConfigWidget::load( const Profile& prof ) {
+    /*
+     * we will use /bin/bash as default
+     * but will fallback in MyPty to /bin/sh
+     * if necessary
+     */
     m_cmd->setText(prof.readEntry("Command", "/bin/bash"));
-    int envcount = prof.readNumEntry("EnvVars", 0); 
+    int envcount = prof.readNumEntry("EnvVars", 0);
     for (int i=0; i<envcount; i++) {
         QString name = prof.readEntry("Env_Name_" + QString::number(i), "");
         QString value = prof.readEntry("Env_Value_" + QString::number(i), "");
         if (!(name.isEmpty() || value.isEmpty())) {
             QListViewItem *item = new QListViewItem(m_env);
             item->setText(0, name);
             item->setText(1, value);
             m_env->insertItem(item);
         }
     }
 }
 
 void ConsoleConfigWidget::save( Profile& prof ) {
     prof.writeEntry( "Command", m_cmd->text());
     QListViewItem *item = m_env->firstChild();
     int counter = 0;
     while (item) {
         QString name = item->text(0);
         QString value = item->text(1);
         prof.writeEntry("Env_Name_" + QString::number(counter), name);
         prof.writeEntry("Env_Value_" + QString::number(counter), value);
         item = item->nextSibling();
         counter++;
     }
diff --git a/noncore/apps/opie-console/profileeditordialog.cpp b/noncore/apps/opie-console/profileeditordialog.cpp
index fd04b6b..6b607df 100644
--- a/noncore/apps/opie-console/profileeditordialog.cpp
+++ b/noncore/apps/opie-console/profileeditordialog.cpp
@@ -179,49 +179,49 @@ QString ProfileEditorDialog::profName()const
 QCString ProfileEditorDialog::profType()const
 {
     /*QStringList w = m_fact->configWidgets();
 	for(QStringList::Iterator it = w.begin(); it != w.end(); it++)
 		if(device_box->currentText() == m_fact->name((*it))) return (*it);
     */
     return QCString();
 }
 /*
  * we need to switch the widget
  */
 void ProfileEditorDialog::slotConActivated( const QString& str ) {
 
     delete m_con;
 
     m_con = m_fact->newConnectionPlugin( str, m_svCon->viewport() );
 
     if ( !m_con ) {
         m_con = new NoOptions( str, m_svCon->viewport(), "name");
     }
 
     // FIXME ugly hack right. Right solution would be to look into the layer and see if it
     // supports auto connect and then set it as prefered
     //if (  (  )->layer()->supports()[0] == 1 ) {
-    if ( m_conCmb ->currentText() == tr("local Console") ) {
+    if ( m_conCmb ->currentText() == tr("Local Console") ) {
         m_autoConnect->setChecked( true );
     } else {
         m_autoConnect->setChecked( false );
     }
 
     m_con->load( m_prof );
     m_svCon->addChild( m_con );
 }
 
 
 /*
  * we need to switch the widget
  */
 void ProfileEditorDialog::slotTermActivated( const QString& str ) {
 
     delete m_term;
 
     m_term = m_fact->newTerminalPlugin( str, m_svTerm->viewport() );
 
     if (m_term) {
         m_term->load( m_prof );
         m_svTerm->addChild( m_term );
     }
 }