1 files changed, 5 insertions, 8 deletions

diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp
index 89b9258..59d4eb0 100644
--- a/libopie2/opiecore/device/odevice_zaurus.cpp
+++ b/libopie2/opiecore/device/odevice_zaurus.cpp
@@ -113,267 +113,267 @@ struct z_button z_buttons_c700 [] = {
     { Qt::Key_F17, QT_TRANSLATE_NOOP("Button", "Hinge3"),
     "devicebuttons/z_hinge3",
     "QPE/Rotation", "rotateDefault()",
     "QPE/Rotation", "rotateDefault()" },
 };
 
 // FIXME This gets unnecessary complicated. We should think about splitting the Zaurus
 //       class up into individual classes. We need three classes
 //
 //       Zaurus-Collie (SA-model  w/ 320x240 lcd, for SL5500 and SL5000)
 //       Zaurus-Poodle (PXA-model w/ 320x240 lcd, for SL5600)
 //       Zaurus-Corgi  (PXA-model w/ 640x480 lcd, for C700, C750, C760, C860, C3000)
 //       Zaurus-Tosa   (PXA-model w/ 480x640 lcd, for SL6000)
 //
 //       Only question right now is: Do we really need to do it? Because as soon
 //       as the OpenZaurus kernel is ready, there will be a unified interface for all
 //       Zaurus models (concerning apm, backlight, buttons, etc.)
 //
 //       Comments? - mickeyl.
 
 void Zaurus::init(const QString& cpu_info)
 {
     // Set the time to wait until the system is realy suspended
     // the delta between apm --suspend and sleeping
     setAPMTimeOut( 15000 );
 
     // generic distribution code already scanned /etc/issue at that point -
     // embedix releases contain "Embedix <version> | Linux for Embedded Devices"
     if ( d->m_sysverstr.contains( "embedix", false ) )
     {
         d->m_vendorstr = "Sharp";
         d->m_vendor = Vendor_Sharp;
         d->m_systemstr = "Zaurus";
         d->m_system = System_Zaurus;
         m_embedix = true;
     }
     else
     {
         d->m_vendorstr = "OpenZaurus Team";
         d->m_systemstr = "OpenZaurus";
         d->m_system = System_OpenZaurus;
         // sysver already gathered
 
         // OpenZaurus sometimes uses the embedix kernel, check if this is one
         FILE *uname = popen("uname -r", "r");
         QFile f;
         QString line;
         if ( f.open(IO_ReadOnly, uname) ) {
             QTextStream ts ( &f );
             line = ts. readLine();
             int loc = line. find ( "embedix" );
             if ( loc != -1 )
                 m_embedix = true;
             else
                 m_embedix = false;
             f.close();
         }
         pclose(uname);
     }
 
     // check the Zaurus model
     QString model;
     int loc = cpu_info.find( ":" );
     if ( loc != -1 )
         model = cpu_info.mid( loc+2 ).simplifyWhiteSpace();
     else
         model = cpu_info;
 
     if ( model == "SHARP Corgi" ) {
         d->m_model = Model_Zaurus_SLC7x0;
         d->m_modelstr = "Zaurus SL-C700";
     } else if ( model == "SHARP Shepherd" ) {
         d->m_model = Model_Zaurus_SLC7x0;
         d->m_modelstr = "Zaurus SL-C750";
     } else if ( model == "SHARP Husky" ) {
         d->m_model = Model_Zaurus_SLC7x0;
         d->m_modelstr = "Zaurus SL-C760 or SL-C860";
     } else if ( model == "SHARP Boxer" ) {
         d->m_model = Model_Zaurus_SLC7x0;
         d->m_modelstr = "Zaurus SL-C760 or SL-C860";
     } else if ( model == "SHARP Poodle" ) {
         d->m_model = Model_Zaurus_SLB600;
         d->m_modelstr = "Zaurus SL-B500 or SL-5600";
     } else if ( model == "Sharp-Collie" || model == "Collie" ) {
         d->m_model = Model_Zaurus_SL5500;
         d->m_modelstr = "Zaurus SL-5500 or SL-5000d";
     } else if ( model == "SHARP Tosa" ) {
         d->m_model = Model_Zaurus_SL6000;
         d->m_modelstr = "Zaurus SL-6000";
     } else if ( model == "SHARP Spitz" ) {
         d->m_model = Model_Zaurus_SLC3000;
         d->m_modelstr = "Zaurus SL-C3000";
     } else {
         d->m_model = Model_Zaurus_SL5500;
         d->m_modelstr = "Unknown Zaurus";
     }
 
     // set initial rotation
     switch( d->m_model ) {
         case Model_Zaurus_SL6000: // fallthrough
         case Model_Zaurus_SLA300:
             d->m_rotation = Rot0;
             break;
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC7x0:
             d->m_rotation = rotation();
             d->m_direction = direction();
             break;
         case Model_Zaurus_SLB600: // fallthrough
         case Model_Zaurus_SL5000: // fallthrough
         case Model_Zaurus_SL5500: // fallthrough
         default:
             d->m_rotation = Rot270;
             break;
     }
     m_leds[0] = Led_Off;
 
     if ( m_embedix )
         qDebug( "Zaurus::init() - Using the Embedix HAL on a %s", (const char*) d->m_modelstr );
     else
         qDebug( "Zaurus::init() - Using the OpenZaurus HAL on a %s", (const char*) d->m_modelstr );
 }
 
 void Zaurus::initButtons()
 {
     if ( d->m_buttons )
         return;
 
-    if ( isQWS( ) ) {
-        addPreHandler(this);
-    }
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     struct z_button * pz_buttons;
     int buttoncount;
     switch ( d->m_model ) {
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC7x0:
+            if ( isQWS( ) ) {
+                addPreHandler(this); // hinge-sensor-handler
+            }
             pz_buttons = z_buttons_c700;
             buttoncount = ARRAY_SIZE(z_buttons_c700);
             break;
         default:
             pz_buttons = z_buttons;
             buttoncount = ARRAY_SIZE(z_buttons);
             break;
     }
 
     for ( int i = 0; i < buttoncount; i++ ) {
         struct z_button *zb = pz_buttons + i;
         ODeviceButton b;
 
         b.setKeycode( zb->code );
         b.setUserText( QObject::tr( "Button", zb->utext ));
         b.setPixmap( Resource::loadPixmap( zb->pix ));
         b.setFactoryPresetPressedAction( OQCopMessage( makeChannel ( zb->fpressedservice ), zb->fpressedaction ));
         b.setFactoryPresetHeldAction( OQCopMessage( makeChannel ( zb->fheldservice ), zb->fheldaction ));
         d->m_buttons->append( b );
     }
 
     reloadButtonMapping();
 }
 
 
 
 typedef struct sharp_led_status {
     int which;   /* select which LED status is wanted. */
     int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 void Zaurus::buzzer( int sound )
 {
 #ifndef QT_NO_SOUND
     Sound *snd = 0;
 
     // All devices except SL5500 have a DSP device
     if ( d->m_model != Model_Zaurus_SL5000
       && d->m_model != Model_Zaurus_SL5500 ) {
 
         switch ( sound ){
         case SHARP_BUZ_TOUCHSOUND: {
             static Sound touch_sound("touchsound");
             snd = &touch_sound;
     }
             break;
         case SHARP_BUZ_KEYSOUND: {
             static Sound key_sound( "keysound" );
             snd = &key_sound;
     }
             break;
         case SHARP_BUZ_SCHEDULE_ALARM:
         default: {
             static Sound alarm_sound("alarm");
             snd = &alarm_sound;
     }
             break;
         }
     }
 
     // If a soundname is defined, we expect that this device has
     // sound capabilities.. Otherwise we expect to have the buzzer
     // device..
     if ( snd && snd->isFinished() ){
         changeMixerForAlarm( 0, "/dev/sound/mixer", snd );
         snd->play();
     } else if( !snd ) {
         int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK );
 
         if ( fd >= 0 ) {
             ::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
             ::close ( fd );
         }
 
     }
 #endif
 }
 
 
 void Zaurus::playAlarmSound()
 {
     buzzer( SHARP_BUZ_SCHEDULE_ALARM );
 }
 
 void Zaurus::playTouchSound()
 {
     buzzer( SHARP_BUZ_TOUCHSOUND );
 }
 
 void Zaurus::playKeySound()
 {
     buzzer( SHARP_BUZ_KEYSOUND );
 }
 
 
 QValueList <OLed> Zaurus::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Mail;
     return vl;
 }
 
 QValueList <OLedState> Zaurus::ledStateList( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Mail )
         vl << Led_Off << Led_On << Led_BlinkSlow;
     return vl;
 }
 
 OLedState Zaurus::ledState( OLed which ) const
 {
     if ( which == Led_Mail )
         return m_leds [0];
     else
         return Led_Off;
 }
 
 bool Zaurus::setLedState( OLed which, OLedState st )
 {
      // Currently not supported on non_embedix kernels
     if (!m_embedix)
     {
         qDebug( "Zaurus::setLedState: ODevice handling for non-embedix kernels not yet implemented" );
         return false;
     }
 
@@ -478,159 +478,156 @@ bool Zaurus::setDisplayStatus( bool on )
     else
     {
         int fd = ::open( "/sys/class/backlight/corgi-bl/power", O_WRONLY|O_NONBLOCK );
         if ( fd )
         {
             char buf[10];
             buf[0] = on ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
             buf[1] = '\0';
             res = ( ::write( fd, &buf[0], 2 ) == 0 );
             ::close( fd );
         }
     }
     return res;
 }
 
 Transformation Zaurus::rotation() const
 {
     qDebug( "Zaurus::rotation()" );
     Transformation rot;
 
     switch ( d->m_model ) {
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC7x0:
         {
             OHingeStatus hs = readHingeSensor();
             qDebug( "Zaurus::rotation() - hinge sensor = %d", (int) hs );
 
             if ( m_embedix )
             {
                 if ( hs == CASE_PORTRAIT ) rot = Rot0;
                 else if ( hs == CASE_UNKNOWN ) rot = Rot0;
                 else rot = Rot270;
             }
             else
             {
                 if ( hs == CASE_PORTRAIT ) rot = Rot90;
                 else if ( hs == CASE_UNKNOWN ) rot = Rot0;
                 else rot = Rot0;
             }
         }
             break;
         case Model_Zaurus_SL6000:
         case Model_Zaurus_SLB600:
         case Model_Zaurus_SLA300:
         case Model_Zaurus_SL5500:
         case Model_Zaurus_SL5000:
         default:
             rot = d->m_rotation;
             break;
     }
 
     return rot;
 }
 ODirection Zaurus::direction() const
 {
     ODirection dir;
 
     switch ( d->m_model ) {
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC7x0: {
                 OHingeStatus hs = readHingeSensor();
                 if ( hs == CASE_PORTRAIT ) dir = CCW;
                 else if ( hs == CASE_UNKNOWN ) dir = CCW;
                 else dir = CW;
             }
             break;
         case Model_Zaurus_SL6000:
         case Model_Zaurus_SLA300:
         case Model_Zaurus_SLB600:
         case Model_Zaurus_SL5500:
         case Model_Zaurus_SL5000:
         default: dir = d->m_direction;
             break;
     }
     return dir;
 
 }
 
 bool Zaurus::hasHingeSensor() const
 {
     return d->m_model == Model_Zaurus_SLC7x0 || d->m_model == Model_Zaurus_SLC3000;
 }
 
 OHingeStatus Zaurus::readHingeSensor() const
 {
     if (m_embedix)
     {
         int handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK);
         if (handle == -1)
         {
             qWarning("Zaurus::readHingeSensor() - failed (%s)", "unknown reason" ); //FIXME: use strerror
             return CASE_UNKNOWN;
         }
         else
         {
             int retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION);
             ::close (handle);
             if ( retval == CASE_CLOSED || retval == CASE_PORTRAIT || retval == CASE_LANDSCAPE )
             {
                 qDebug( "Zaurus::readHingeSensor() - result = %d", retval );
                 return static_cast<OHingeStatus>( retval );
             }
             else
             {
                 qWarning("Zaurus::readHingeSensor() - couldn't compute hinge status!" );
                 return CASE_UNKNOWN;
             }
         }
     }
     else
     {
         // corgi keyboard is event source 0 in OZ kernel 2.6
         OInputDevice* keyboard = OInputSystem::instance()->device( "event0" );
         if ( keyboard && keyboard->isHeld( OInputDevice::Key_KP0 ) ) return CASE_LANDSCAPE;
         else if ( keyboard && keyboard->isHeld( OInputDevice::Key_KP1 ) ) return CASE_PORTRAIT;
         else if ( keyboard && keyboard->isHeld( OInputDevice::Key_KP2 ) ) return CASE_CLOSED;
         qWarning("Zaurus::readHingeSensor() - couldn't compute hinge status!" );
         return CASE_UNKNOWN;
     }
 }
 
 /*
  * Take code from iPAQ device.
  * That way we switch the cursor directions depending on status of hinge sensor, eg. hardware direction.
  * I hope that is ok - Alwin
  */
 bool Zaurus::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
-    Transformation rot;
     int newkeycode = keycode;
 
-
     if (d->m_model!=Model_Zaurus_SLC3000 && d->m_model!=Model_Zaurus_SLC7x0) return false;
-    rot = rotation();
-    if (rot==Rot0) return false;
 
     /* map cursor keys depending on the hinge status */
     switch ( keycode ) {
         // Rotate cursor keys
         case Key_Left :
         case Key_Right:
         case Key_Up   :
         case Key_Down :
         {
-            if (rot==Rot90) {
+            if (rotation()==Rot90) {
                 newkeycode = Key_Left + ( keycode - Key_Left + 3 ) % 4;
             }
         }
         break;
 
     }
     if (newkeycode!=keycode) {
         if ( newkeycode != Key_unknown ) {
             QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat );
         }
         return true;
     }
     return false;
 }
+