| -rw-r--r-- | libopie2/opiecore/device/odevice_simpad.cpp | 36 |
1 files changed, 17 insertions, 19 deletions
diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp index 9fde7f9..2e54216 100644 --- a/libopie2/opiecore/device/odevice_simpad.cpp +++ b/libopie2/opiecore/device/odevice_simpad.cpp @@ -26,377 +26,375 @@ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "odevice_simpad.h" /* QT */ #include <qapplication.h> #include <qfile.h> #include <qtextstream.h> #include <qwindowsystem_qws.h> #include <qwidgetlist.h> /* OPIE */ #include <qpe/config.h> #include <qpe/resource.h> #include <qpe/sound.h> #include <qpe/qcopenvelope_qws.h> #include <opie2/okeyfilter.h> /* STD */ #include <fcntl.h> #include <math.h> #include <stdlib.h> #include <signal.h> #include <sys/ioctl.h> #include <sys/time.h> #include <unistd.h> #ifndef QT_NO_SOUND #include <linux/soundcard.h> #endif namespace Opie { namespace Core { namespace Internal { namespace { struct s_button { uint model; Qt::Key code; char *utext; char *pix; char *fpressedservice; char *fpressedaction; char *fheldservice; char *fheldaction; }; static struct s_button simpad_buttons [] = { { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Lower+Up"), "devicebuttons/simpad_lower_up", "datebook", "nextView()", "today", "raise()" }, { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Lower+Down"), "devicebuttons/simpad_lower_down", "addressbook", "raise()", "addressbook", "beamBusinessCard()" }, { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Lower+Right"), "devicebuttons/simpad_lower_right", "QPE/TaskBar", "toggleMenu()", "QPE/TaskBar", "toggleStartMenu()" }, { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Lower+Left"), "devicebuttons/simpad_lower_left", "opiemail", "raise()", "opiemail", "newMail()" }, { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F5, QT_TRANSLATE_NOOP("Button", "Upper+Up"), "devicebuttons/simpad_upper_up", "QPE/Launcher", "home()", "buttonsettings", "raise()" }, { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F6, QT_TRANSLATE_NOOP("Button", "Upper+Down"), "devicebuttons/simpad_upper_down", "addressbook", "raise()", "addressbook", "beamBusinessCard()" }, { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F7, QT_TRANSLATE_NOOP("Button", "Upper+Right"), "devicebuttons/simpad_upper_right", "QPE/TaskBar", "toggleMenu()", "QPE/TaskBar", "toggleStartMenu()" }, { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Upper+Left"), "devicebuttons/simpad_upper_left", "QPE/Rotation", "flip()", "QPE/Rotation", "flip()" }, /* { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"), "devicebuttons/simpad_lower_upper", "QPE/Launcher", "home()", "buttonsettings", "raise()" }, { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"), "devicebuttons/simpad_upper_lower", "QPE/Launcher", "home()", "buttonsettings", "raise()" }, */ }; } void SIMpad::init(const QString&) { d->m_vendorstr = "SIEMENS"; d->m_vendor = Vendor_SIEMENS; //TODO Implement model checking //FIXME For now we assume an SL4 d->m_modelstr = "SL4"; d->m_model = Model_SIMpad_SL4; switch ( d->m_model ) { default: d->m_rotation = Rot0; d->m_direction = CCW; d->m_holdtime = 1000; // 1000ms break; } //Distribution detecting code is now in base class m_leds [0] = m_leds [1] = Led_Off; m_power_timer = 0; } void SIMpad::initButtons() { if ( d->m_buttons ) return; d->m_buttons = new QValueList <ODeviceButton>; uint size = sizeof(simpad_buttons)/sizeof(s_button); for ( uint i = 0; i < size; i++ ) { s_button *sb = simpad_buttons + i; ODeviceButton b; if (( sb->model & d->m_model ) == d->m_model ) { b. setKeycode ( sb->code ); b. setUserText ( QObject::tr ( "Button", sb->utext )); b. setPixmap ( Resource::loadPixmap ( sb->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction )); d->m_buttons->append ( b ); } } reloadButtonMapping(); } // SIMpad boardcontrol register CS3 #define SIMPAD_BOARDCONTROL "/proc/cs3" #define SIMPAD_VCC_5V_EN 0x0001 // For 5V PCMCIA #define SIMPAD_VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA #define SIMPAD_EN1 0x0004 // This is only for EPROM's #define SIMPAD_EN0 0x0008 // Both should be enable for 3.3V or 5V #define SIMPAD_DISPLAY_ON 0x0010 #define SIMPAD_PCMCIA_BUFF_DIS 0x0020 #define SIMPAD_MQ_RESET 0x0040 #define SIMPAD_PCMCIA_RESET 0x0080 #define SIMPAD_DECT_POWER_ON 0x0100 #define SIMPAD_IRDA_SD 0x0200 // Shutdown for powersave #define SIMPAD_RS232_ON 0x0400 #define SIMPAD_SD_MEDIAQ 0x0800 // Shutdown for powersave #define SIMPAD_LED2_ON 0x1000 #define SIMPAD_IRDA_MODE 0x2000 // Fast/Slow IrDA mode #define SIMPAD_ENABLE_5V 0x4000 // Enable 5V circuit #define SIMPAD_RESET_SIMCARD 0x8000 //SIMpad touchscreen backlight strength control #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/backlight" /* * The SIMpad exposes ChipSelect3 to userspace * via a proc filesystem file. Using this register * one can toggle power of serial, irda, dect circuits * change the video driver and display status and * many more things. * To not lose the current setting we read the current * cs3 setting and toggle the necessary bits and then * write it. */ static bool setCS3Bit( bool bitset, int bit ) { - int cs3_fd = ::open( SIMPAD_BOARDCONTROL, O_RDONLY ); - - if ( cs3_fd < 0 ) + QFile file( SIMPAD_BOARDCONTROL ); + if ( !file.open( IO_ReadOnly ) ) return false; - static char line[32]; - int val = 0; - bool ok = false; + unsigned int val = 0; + bool ok = false; + QTextStream stream( &file ); /* - * try to read and parse the Chipselect3 status - * be paranoid and make sure line[31] is null - * terminated + * Use QFile and QTextStream for parsing to be more + * robust */ - while( !ok && ::read(cs3_fd, &line, sizeof(line)) > 0 ) { - line[31] = '\0'; - if (::sscanf(line, "Chipselect3 : %x", &val )) + while ( !stream.atEnd() ) { + QString line = stream.readLine(); + if ( line.startsWith( "Chipselect3 : " ) ) { + val = line.mid( 15 ).toUInt( 0, 16 ); ok = true; + break; + } } - ::close(cs3_fd); - - /* - * we were not able to find the current value - * and as a result we won't set it - */ if ( !ok ) return false; + file.close(); + /* * change the value */ val = bitset ? (val | bit) : (val & ~bit); /* * write it back */ - cs3_fd = ::open( SIMPAD_BOARDCONTROL, O_WRONLY ); + int cs3_fd = ::open( SIMPAD_BOARDCONTROL, O_WRONLY ); if ( cs3_fd < 0 ) return false; + char line[32]; ::snprintf(line, sizeof(line), "0x%04x\n", val); ::write(cs3_fd, line, strlen(line)); ::close(cs3_fd); return true; } QValueList <OLed> SIMpad::ledList() const { QValueList <OLed> vl; vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one? //vl << Led_Mail; //TODO find out if LED1 is accessible anyway return vl; } QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Power ) //FIXME which LED is LED2 ? The green one or the amber one? vl << Led_Off << Led_On; //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway //vl << Led_Off; return vl; } OLedState SIMpad::ledState ( OLed l ) const { switch ( l ) { case Led_Power: return m_leds [0]; //case Led_Mail: // return m_leds [1]; default: return Led_Off; } } bool SIMpad::setLedState ( OLed l, OLedState st ) { if ( l == Led_Power ) { m_leds [0] = st; setCS3Bit(st == Led_On, SIMPAD_LED2_ON); return true; } return false; } void SIMpad::timerEvent ( QTimerEvent * ) { killTimer ( m_power_timer ); m_power_timer = 0; QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false ); QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false ); } void SIMpad::playAlarmSound() { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); if(!snd.isFinished()) return; /* save as the Sound is static! */ changeMixerForAlarm( 0, "/dev/sound/mixer" , &snd); snd. play(); #endif } bool SIMpad::suspend() // Must override because SIMpad does NOT have apm { if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; bool res = ODevice::suspend(); /* * restore the screen content if we really * supended the device */ if ( res ) updateAllWidgets(); return res; } bool SIMpad::setDisplayStatus ( bool on ) { qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" ); return setCS3Bit(on, SIMPAD_DISPLAY_ON); } bool SIMpad::setDisplayBrightness ( int bright ) { qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright ); bool res = false; int fd; if ( bright > 255 ) bright = 255; if ( bright < 1 ) bright = 0; if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) { QCString str = QFile::encodeName( QString::number(bright)); res = ( ::write(fd, str, str.length()) != -1 ); ::close ( fd ); } return res; } int SIMpad::displayBrightnessResolution() const { return 255; // All SIMpad models share the same display } /* * The MQ200 DRAM content is lost during suspend * so we will just repaint every widget on resume */ void SIMpad::updateAllWidgets() { QWidgetList *list = QApplication::allWidgets(); QWidgetListIt it( *list ); QWidget *wid; while ((wid=it.current()) != 0 ) { wid->update(); ++it; } delete list; } } } } |