| -rw-r--r-- | noncore/net/wellenreiter/gui/wellenreiter.cpp | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/noncore/net/wellenreiter/gui/wellenreiter.cpp b/noncore/net/wellenreiter/gui/wellenreiter.cpp index 5dc2e79..14f251a 100644 --- a/noncore/net/wellenreiter/gui/wellenreiter.cpp +++ b/noncore/net/wellenreiter/gui/wellenreiter.cpp @@ -158,408 +158,427 @@ void Wellenreiter::handleBeacon( OPacket* p, OWaveLanManagementPacket* beacon ) { type = "managed"; } else { qWarning( "Wellenreiter::invalid frame [possibly noise] detected!" ); return; } OWaveLanManagementSSID* ssid = static_cast<OWaveLanManagementSSID*>( p->child( "802.11 SSID" ) ); QString essid = ssid ? ssid->ID() : QString("<unknown>"); OWaveLanManagementDS* ds = static_cast<OWaveLanManagementDS*>( p->child( "802.11 DS" ) ); int channel = ds ? ds->channel() : -1; OWaveLanPacket* header = static_cast<OWaveLanPacket*>( p->child( "802.11" ) ); GpsLocation loc( 0, 0 ); if ( configwindow->enableGPS->isChecked() ) { // TODO: add check if GPS is working!? qDebug( "Wellenreiter::gathering GPS data..." ); loc = gps->position(); qDebug( "Wellenreiter::GPS data received is ( %f , %f )", loc.latitude, loc.longitude ); } netView()->addNewItem( type, essid, header->macAddress2(), beacon->canPrivacy(), channel, 0, loc ); // update graph window if ( ds ) { OPrismHeaderPacket* prism = static_cast<OPrismHeaderPacket*>( p->child( "Prism" ) ); if ( prism ) graphwindow->traffic( ds->channel(), prism->signalStrength() ); else graphwindow->traffic( ds->channel(), 95 ); } } void Wellenreiter::handleData( OPacket* p, OWaveLanDataPacket* data ) { OWaveLanPacket* wlan = (OWaveLanPacket*) p->child( "802.11" ); if ( wlan->fromDS() && !wlan->toDS() ) { netView()->fromDStraffic( wlan->macAddress3(), wlan->macAddress1(), wlan->macAddress2() ); } else if ( !wlan->fromDS() && wlan->toDS() ) { netView()->toDStraffic( wlan->macAddress2(), wlan->macAddress3(), wlan->macAddress1() ); } else if ( wlan->fromDS() && wlan->toDS() ) { netView()->WDStraffic( wlan->macAddress4(), wlan->macAddress3(), wlan->macAddress1(), wlan->macAddress2() ); } else { netView()->IBSStraffic( wlan->macAddress2(), wlan->macAddress1(), wlan->macAddress3() ); } OARPPacket* arp = (OARPPacket*) p->child( "ARP" ); if ( arp ) { qDebug( "Received ARP traffic (type '%s'): ", (const char*) arp->type() ); if ( arp->type() == "REQUEST" ) { netView()->identify( arp->senderMacAddress(), arp->senderIPV4Address().toString() ); } else if ( arp->type() == "REPLY" ) { netView()->identify( arp->senderMacAddress(), arp->senderIPV4Address().toString() ); netView()->identify( arp->targetMacAddress(), arp->targetIPV4Address().toString() ); } } OIPPacket* ip = (OIPPacket*) p->child( "IP" ); if ( ip ) { qDebug( "Received IP packet." ); } } QObject* Wellenreiter::childIfToParse( OPacket* p, const QString& protocol ) { if ( configwindow->parsePackets->isProtocolChecked( protocol ) ) if ( configwindow->parsePackets->protocolAction( protocol ) == "Discard!" ) return 0; return p->child( protocol ); } bool Wellenreiter::checkDumpPacket( OPacket* p ) { // go through all child packets and see if one is inside the child hierarchy for p // if so, do what the user requested (protocolAction), e.g. pass or discard if ( !configwindow->writeCaptureFile->isChecked() ) return false; QObjectList* l = p->queryList(); QObjectListIt it( *l ); QObject* o; while ( (o = it.current()) != 0 ) { QString name = it.current()->name(); if ( configwindow->capturePackets->isProtocolChecked( name ) ) { QString action = configwindow->capturePackets->protocolAction( name ); qDebug( "capturePackets-action for '%s' seems to be '%s'", (const char*) name, (const char*) action ); if ( action == "Discard" ) { logwindow->log( QString().sprintf( "(i) dump-discarding of '%s' packet requested.", (const char*) name ) ); return false; } } else { qDebug( "protocol '%s' not checked in capturePackets.", (const char*) name ); } ++it; } return true; } void Wellenreiter::receivePacket( OPacket* p ) { hexWindow()->log( p->dump( 8 ) ); if ( checkDumpPacket( p ) ) { pcap->dump( p ); } // check if we received a beacon frame OWaveLanManagementPacket* beacon = static_cast<OWaveLanManagementPacket*>( childIfToParse( p, "802.11 Management" ) ); if ( beacon && beacon->managementType() == "Beacon" ) { handleBeacon( p, beacon ); return; } //TODO: WEP check here // check for a data frame OWaveLanDataPacket* data = static_cast<OWaveLanDataPacket*>( childIfToParse( p, "802.11 Data" ) ); if ( data ) { handleData( p, data ); } handleNotification( p ); } void Wellenreiter::stopClicked() { if ( iface ) { disconnect( SIGNAL( receivedPacket(OPacket*) ), this, SLOT( receivePacket(OPacket*) ) ); disconnect( SIGNAL( hopped(int) ), this, SLOT( channelHopped(int) ) ); iface->setChannelHopping(); // stop hopping channels } else killTimers(); pcap->close(); sniffing = false; if ( iface ) { // switch off monitor mode iface->setMonitorMode( false ); // switch off promisc flag iface->setPromiscuousMode( false ); system( "cardctl reset; sleep 1" ); //FIXME: Use OProcess } logwindow->log( "(i) Stopped Scanning." ); assert( parent() ); ( (QMainWindow*) parent() )->setCaption( "Wellenreiter II" ); // message the user QMessageBox::information( this, "Wellenreiter II", tr( "Your wireless card\nshould now be usable again." ) ); sniffing = false; emit( stoppedSniffing() ); + #ifdef QWS + if ( WellenreiterConfigWindow::instance()->disablePM->isChecked() ) + { + QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::Enable; + } + #else + #warning FIXME: setScreenSaverMode is not operational on the X11 build + #endif + // print out statistics for( QMap<QString,int>::ConstIterator it = pcap->statistics().begin(); it != pcap->statistics().end(); ++it ) statwindow->updateCounter( it.key(), it.data() ); } void Wellenreiter::startClicked() { // get configuration from config window const QString& interface = configwindow->interfaceName->currentText(); const int cardtype = configwindow->driverType(); const int interval = configwindow->hoppingInterval(); if ( ( interface == "" ) || ( cardtype == 0 ) ) { QMessageBox::information( this, "Wellenreiter II", tr( "Your device is not\nproperly configured. Please reconfigure!" ) ); return; } // configure device ONetwork* net = ONetwork::instance(); // TODO: check if interface is wireless and support sniffing for non-wireless interfaces iface = static_cast<OWirelessNetworkInterface*>(net->interface( interface )); // fails if network is not wireless! // bring device UP iface->setUp( true ); if ( !iface->isUp() ) { QMessageBox::warning( this, "Wellenreiter II", tr( "Can't bring interface '%1' up:\n" ).arg( iface->name() ) + strerror( errno ) ); return; } // set monitor mode bool usePrism = configwindow->usePrismHeader(); switch ( cardtype ) { case DEVTYPE_CISCO: iface->setMonitoring( new OCiscoMonitoringInterface( iface, usePrism ) ); break; case DEVTYPE_WLAN_NG: iface->setMonitoring( new OWlanNGMonitoringInterface( iface, usePrism ) ); break; case DEVTYPE_HOSTAP: iface->setMonitoring( new OHostAPMonitoringInterface( iface, usePrism ) ); break; case DEVTYPE_ORINOCO: iface->setMonitoring( new OOrinocoMonitoringInterface( iface, usePrism ) ); break; case DEVTYPE_MANUAL: QMessageBox::information( this, "Wellenreiter II", tr( "Bring your device into\nmonitor mode now." ) ); break; case DEVTYPE_FILE: qDebug( "Wellenreiter: Capturing from file '%s'", (const char*) interface ); break; default: assert( 0 ); // shouldn't reach this } // switch device into monitor mode if ( cardtype < DEVTYPE_FILE ) { if ( cardtype != DEVTYPE_MANUAL ) iface->setMonitorMode( true ); if ( !iface->monitorMode() ) { if ( QMessageBox::warning( this, "Wellenreiter II", tr( "Can't set interface '%1'\ninto monitor mode:\n" ).arg( iface->name() ) + strerror( errno ) + tr( "\nContinue with limited functionality?" ), QMessageBox::Yes, QMessageBox::No ) == QMessageBox::No ) return; } } // open GPS device if ( configwindow->enableGPS->isChecked() ) { qDebug( "Wellenreiter:GPS enabled @ %s:%d", (const char*) configwindow->gpsdHost->currentText(), configwindow->gpsdPort->value() ); gps->open( configwindow->gpsdHost->currentText(), configwindow->gpsdPort->value() ); } // open pcap and start sniffing if ( cardtype != DEVTYPE_FILE ) { pcap->open( interface ); if ( configwindow->writeCaptureFile->isChecked() ) { QString dumpname( configwindow->captureFileName->text() ); if ( dumpname.isEmpty() ) dumpname = "captureFile"; dumpname.append( '-' ); dumpname.append( QTime::currentTime().toString().replace( QRegExp( ":" ), "-" ) ); dumpname.append( ".wellenreiter" ); pcap->openDumpFile( dumpname ); } else { pcap->open( interface ); } } else { pcap->open( QFile( interface ) ); } if ( !pcap->isOpen() ) { QMessageBox::warning( this, "Wellenreiter II", tr( "Can't open packet capturer for '%1':\n" ).arg( iface->name() ) + QString(strerror( errno ) )); return; } // set capturer to non-blocking mode pcap->setBlocking( false ); // start channel hopper if ( cardtype != DEVTYPE_FILE ) { logwindow->log( QString().sprintf( "(i) Starting channel hopper (d=%d ms)", configwindow->hopInterval->value() ) ); iface->setChannelHopping( configwindow->hopInterval->value() ); //use interval from config window } if ( cardtype != DEVTYPE_FILE ) { // connect socket notifier and start channel hopper connect( pcap, SIGNAL( receivedPacket(OPacket*) ), this, SLOT( receivePacket(OPacket*) ) ); connect( iface->channelHopper(), SIGNAL( hopped(int) ), this, SLOT( channelHopped(int) ) ); } else { // start timer for reading packets startTimer( 100 ); } logwindow->log( "(i) Started Scanning." ); sniffing = true; + + #ifdef QWS + if ( WellenreiterConfigWindow::instance()->disablePM->isChecked() ) + { + QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::Disable; + } + #else + #warning FIXME: setScreenSaverMode is not operational on the X11 build + #endif + emit( startedSniffing() ); if ( cardtype != DEVTYPE_FILE ) channelHopped( 6 ); // set title else { assert( parent() ); ( (QMainWindow*) parent() )->setCaption( tr( "Wellenreiter II - replaying capture file..." ) ); } } void Wellenreiter::timerEvent( QTimerEvent* ) { qDebug( "Wellenreiter::timerEvent()" ); OPacket* p = pcap->next(); if ( !p ) // no more packets available { stopClicked(); } else { receivePacket( p ); delete p; } } void Wellenreiter::doAction( const QString& action, const QString& protocol, OPacket* p ) { #ifdef QWS if ( action == "TouchSound" ) ODevice::inst()->touchSound(); else if ( action == "AlarmSound" ) ODevice::inst()->alarmSound(); else if ( action == "KeySound" ) ODevice::inst()->keySound(); else if ( action == "LedOn" ) ODevice::inst()->setLedState( Led_Mail, Led_On ); else if ( action == "LedOff" ) ODevice::inst()->setLedState( Led_Mail, Led_Off ); else if ( action == "LogMessage" ) logwindow->log( QString().sprintf( "Got packet with protocol '%s'", (const char*) protocol ) ); else if ( action == "MessageBox" ) QMessageBox::information( this, "Notification!", QString().sprintf( "Got packet with protocol '%s'", (const char*) protocol ) ); #else #warning Actions do not work with Qt/X11 yet #endif } void Wellenreiter::joinNetwork(const QString& type, const QString& essid, int channel, const QString& macaddr) { #ifdef QWS if ( !iface ) { QMessageBox::warning( this, tr( "Can't do that!" ), tr( "No wireless\ninterface available." ) ); return; } if ( sniffing ) { QMessageBox::warning( this, tr( "Can't do that!" ), tr( "Stop sniffing before\njoining a net." ) ); return; } qDebug( "joinNetwork() with Interface %s: %s, %s, %d, %s", (const char*) iface->name(), (const char*) type, (const char*) essid, channel, (const char*) macaddr ); QCopEnvelope msg( "QPE/Application/networksettings", "wlan(QString,QString,QString)" ); int count = 3; qDebug("sending %d messages",count); msg << QString("count") << QString::number(count); qDebug("msg >%s< Mode >%s<", iface->name(),type.latin1() ); msg << QString(iface->name()) << QString("Mode") << type; qDebug("msg >%s< essid >%s<", iface->name(),essid.latin1()); msg << QString(iface->name()) << QString("ESSID") << essid; qDebug("msg >%s< channel >%d<", iface->name(),channel); msg << QString(iface->name()) << QString("Channel") << channel; // qDebug("msg >%s< mac >%s<", iface->name(),macaddr); // msg << QString(iface->name()) << QString("MacAddr") << macaddr; #else QMessageBox::warning( this, tr( "Can't do that!" ), tr( "Function only available on Embedded build" ) ); #endif } |