summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--libopie/odevice.cpp2
1 files changed, 1 insertions, 1 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 58254a7..71ed9e4 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -1334,385 +1334,385 @@ bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, b
newkeycode = Key_unknown;
break;
}
}
if ( newkeycode != keycode ) {
if ( newkeycode != Key_unknown )
QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat );
return true;
}
else
return false;
}
void iPAQ::timerEvent ( QTimerEvent * )
{
killTimer ( m_power_timer );
m_power_timer = 0;
QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
}
void iPAQ::alarmSound ( )
{
#ifndef QT_NO_SOUND
static Sound snd ( "alarm" );
int fd;
int vol;
bool vol_reset = false;
if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
Config cfg ( "qpe" );
cfg. setGroup ( "Volume" );
int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
if ( volalarm < 0 )
volalarm = 0;
else if ( volalarm > 100 )
volalarm = 100;
volalarm |= ( volalarm << 8 );
if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
vol_reset = true;
}
}
snd. play ( );
while ( !snd. isFinished ( ))
qApp-> processEvents ( );
if ( fd >= 0 ) {
if ( vol_reset )
::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
::close ( fd );
}
#endif
}
bool iPAQ::setSoftSuspend ( bool soft )
{
bool res = false;
int fd;
if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
res = true;
else
::perror ( "write to /proc/sys/ts/suspend_button_mode" );
::close ( fd );
}
else
::perror ( "/proc/sys/ts/suspend_button_mode" );
return res;
}
bool iPAQ::setDisplayBrightness ( int bright )
{
bool res = false;
int fd;
if ( bright > 255 )
bright = 255;
if ( bright < 0 )
bright = 0;
if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
FLITE_IN bl;
bl. mode = 1;
bl. pwr = bright ? 1 : 0;
bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
::close ( fd );
}
return res;
}
int iPAQ::displayBrightnessResolution ( ) const
{
switch ( model ( )) {
case Model_iPAQ_H31xx:
case Model_iPAQ_H36xx:
case Model_iPAQ_H37xx:
return 128; // really 256, but >128 could damage the LCD
case Model_iPAQ_H38xx:
case Model_iPAQ_H39xx:
return 64;
case Model_iPAQ_H5xxx:
return 255;
default:
return 2;
}
}
bool iPAQ::hasLightSensor ( ) const
{
return true;
}
int iPAQ::readLightSensor ( )
{
int fd;
int val = -1;
if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) {
char buffer [8];
if ( ::read ( fd, buffer, 5 ) == 5 ) {
char *endptr;
buffer [4] = 0;
val = ::strtol ( buffer + 2, &endptr, 16 );
if ( *endptr != 0 )
val = -1;
}
::close ( fd );
}
return val;
}
int iPAQ::lightSensorResolution ( ) const
{
return 256;
}
/**************************************************
*
* Zaurus
*
**************************************************/
// Check whether this device is the sharp zaurus..
bool Zaurus::isZaurus()
{
// If the special devices by embedix exist, it is quite simple: it is a Zaurus !
if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ) ){
return true;
}
// On non-embedix kernels, we have to look closer.
bool is_zaurus = false;
QFile f ( "/proc/cpuinfo" );
if ( f. open ( IO_ReadOnly ) ) {
QString model;
QFile f ( "/proc/cpuinfo" );
QTextStream ts ( &f );
QString line;
while( line = ts. readLine ( ) ) {
if ( line. left ( 8 ) == "Hardware" )
break;
}
int loc = line. find ( ":" );
if ( loc != -1 )
model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
if ( model == "Sharp-Collie"
|| model == "Collie"
|| model == "SHARP Corgi"
|| model == "SHARP Shepherd"
|| model == "SHARP Poodle"
- || model == "SHARP Husky" )
+ || model == "SHARP Husky"
)
is_zaurus = true;
}
return is_zaurus;
}
void Zaurus::init ( )
{
d-> m_vendorstr = "Sharp";
d-> m_vendor = Vendor_Sharp;
m_embedix = true; // Not openzaurus means: It has an embedix kernel !
// QFile f ( "/proc/filesystems" );
QString model;
// It isn't a good idea to check the system configuration to
// detect the distribution !
// Otherwise it may happen that any other distribution is detected as openzaurus, just
// because it uses a jffs2 filesystem..
// (eilers)
// if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
QFile f ("/etc/oz_version");
if ( f.exists() ){
d-> m_vendorstr = "OpenZaurus Team";
d-> m_systemstr = "OpenZaurus";
d-> m_system = System_OpenZaurus;
if ( f. open ( IO_ReadOnly )) {
QTextStream ts ( &f );
d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
f. close ( );
}
// Openzaurus sometimes uses the embedix kernel!
// => Check whether this is an embedix kernel
FILE *uname = popen("uname -r", "r");
QString line;
if ( f.open(IO_ReadOnly, uname) ) {
QTextStream ts ( &f );
line = ts. readLine ( );
int loc = line. find ( "embedix" );
if ( loc != -1 )
m_embedix = true;
else
m_embedix = false;
f. close ( );
}
pclose(uname);
}
else {
d-> m_systemstr = "Zaurus";
d-> m_system = System_Zaurus;
}
f. setName ( "/proc/cpuinfo" );
if ( f. open ( IO_ReadOnly ) ) {
QTextStream ts ( &f );
QString line;
while( line = ts. readLine ( ) ) {
if ( line. left ( 8 ) == "Hardware" )
break;
}
int loc = line. find ( ":" );
if ( loc != -1 )
model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
}
if ( model == "SHARP Corgi" ) {
d-> m_model = Model_Zaurus_SLC7x0;
d-> m_modelstr = "Zaurus SL-C700";
} else if ( model == "SHARP Shepherd" ) {
d-> m_model = Model_Zaurus_SLC7x0;
d-> m_modelstr = "Zaurus SL-C750";
} else if ( model == "SHARP Husky" ) {
d-> m_model = Model_Zaurus_SLC7x0;
d-> m_modelstr = "Zaurus SL-C760";
} else if ( model == "SHARP Poodle" ) {
d-> m_model = Model_Zaurus_SLB600;
d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
} else if ( model == "Sharp-Collie" || model == "Collie" ) {
d-> m_model = Model_Zaurus_SL5500;
d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
} else {
d-> m_model = Model_Zaurus_SL5500;
d-> m_modelstr = "Zaurus (Model unknown)";
}
bool flipstate = false;
switch ( d-> m_model ) {
case Model_Zaurus_SLA300:
d-> m_rotation = Rot0;
break;
case Model_Zaurus_SLC7x0:
// Note: need to 1) set flipstate based on physical screen orientation
// and 2) check to see if the user overrode the rotation direction
// using appearance, and if so, remove that item from the Config to
// ensure the rotate applet flips us back to the previous state.
if ( flipstate ) {
// 480x640
d-> m_rotation = Rot0;
d-> m_direction = CW;
} else {
// 640x480
d-> m_rotation = Rot270;
d-> m_direction = CCW;
}
break;
case Model_Zaurus_SLB600:
case Model_Zaurus_SL5500:
case Model_Zaurus_SL5000:
default:
d-> m_rotation = Rot270;
break;
}
m_leds [0] = Led_Off;
}
void Zaurus::initButtons ( )
{
if ( d-> m_buttons )
return;
d-> m_buttons = new QValueList <ODeviceButton>;
struct z_button * pz_buttons;
int buttoncount;
switch ( d-> m_model ) {
case Model_Zaurus_SLC7x0:
pz_buttons = z_buttons_c700;
buttoncount = ARRAY_SIZE(z_buttons_c700);
break;
default:
pz_buttons = z_buttons;
buttoncount = ARRAY_SIZE(z_buttons);
break;
}
for ( int i = 0; i < buttoncount; i++ ) {
struct z_button *zb = pz_buttons + i;
ODeviceButton b;
b. setKeycode ( zb-> code );
b. setUserText ( QObject::tr ( "Button", zb-> utext ));
b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ),
zb-> fpressedaction ));
b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ),
zb-> fheldaction ));
d-> m_buttons-> append ( b );
}
reloadButtonMapping ( );
QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )),
this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
}
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
//#include <asm/sharp_char.h> // including kernel headers is evil ...
#define SHARP_DEV_IOCTL_COMMAND_START 0x5680
#define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
#define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START)
#define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */
#define SHARP_BUZ_KEYSOUND 2 /* key sound */
#define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */
/* --- for SHARP_BUZZER device --- */
//#define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
//#define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START)
#define SHARP_BUZZER_SETVOLUME (SHARP_BUZZER_IOCTL_START+1)
#define SHARP_BUZZER_GETVOLUME (SHARP_BUZZER_IOCTL_START+2)
#define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
#define SHARP_BUZZER_SETMUTE (SHARP_BUZZER_IOCTL_START+4)
#define SHARP_BUZZER_STOPSOUND (SHARP_BUZZER_IOCTL_START+5)
//#define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */
//#define SHARP_BUZ_KEYSOUND 2 /* key sound */
//#define SHARP_PDA_ILLCLICKSOUND 3 /* illegal click */
//#define SHARP_PDA_WARNSOUND 4 /* warning occurred */