1 files changed, 34 insertions, 10 deletions

diff --git a/noncore/apps/zsafe/zsafe.cpp b/noncore/apps/zsafe/zsafe.cpp
index ef16b46..e86b3d2 100644
--- a/noncore/apps/zsafe/zsafe.cpp
+++ b/noncore/apps/zsafe/zsafe.cpp
@@ -2408,625 +2408,649 @@ int ZSafe::saveEntry(char *entry[FIELD_SIZE])
         Krc2* krc2 = new Krc2();
 
         buffer = (char*)memset(buffer, '\0', save_buffer_length);
 
         for (count2 = 0; count2 < FIELD_SIZE; count2++) {
                 text1 = entry[count2];
                 if (strlen (text1) == 0) {
                         strncat(buffer, " ", strlen(" "));
                 } else {
                         strncat(buffer, text1, strlen(text1));
                 }
                 /* Use 255 as the marker.  \n is too tough to test for */
                 buffer[strlen (buffer)] = 255;
         } /*for (count2 = 0; count2 < 5; count2++)*/
         count2 = 0;
         /* I'm using CBC mode and encrypting the data straight from top down.
          * At the bottom, encrypted, I will append an MD5 hash of the file, eventually.
          * PKCS 5 padding (explained at the code section
          */
         while (count2 < (int)strlen (buffer)) {
 #ifndef WORDS_BIGENDIAN
                 plaintext[bufferIndex] = buffer[count2 + 1] << 8;
                 plaintext[bufferIndex] += buffer[count2] & 0xff;
 #endif
 #ifdef WORDS_BIGENDIAN
                 plaintext[bufferIndex] = buffer[count2] << 8;
                 plaintext[bufferIndex] += buffer[count2 + 1] & 0xff;
 #endif
                 bufferIndex++;
                 if (bufferIndex == 4) {
                         krc2->rc2_encrypt (plaintext);
 
                         for (count3 = 0; count3 < 4; count3++) {
                                 ciphertext[count3] = iv[count3] ^ plaintext[count3];
 
                                 /* Now store the ciphertext as the iv */
                                 iv[count3] = plaintext[count3];
 
                                 /* reset the buffer index */
                                 bufferIndex = 0;
                                 if (putc ((unsigned char) (ciphertext[count3] >> 8), fd) == EOF) return PWERR_DATA;
                                 if (putc ((unsigned char) (ciphertext[count3] & 0xff), fd) == EOF) return PWERR_DATA;
                         } /*for (count3 = 0; count3 < 5; count3++)*/
                 } /*if (bufferIndex == 5)*/
                 /* increment a short, not a byte */
                 count2 += 2;
         } /*while (count2 < strlen (buffer))*/
         int ret = PWERR_GOOD;
         return ret;
 }
 
 int ZSafe::saveFinalize(void)
 {
         int count1, retval = PWERR_GOOD;
         unsigned short ciphertext[4];
         Krc2* krc2 = new Krc2();
 
         /* Tack on the PKCS 5 padding
          * How it works is we fill up the last n bytes with the value n
          *
          * So, if we have, say, 13 bytes, 8 of which are used, we have 5 left
          * over, leaving us 3 short, so we fill it in with 3's.
          *
          * If we come out even, we fill it with 8 8s
          *
          * um, except that in this instance we are using 4 shorts instead of 8 bytes.
          * so, half everything
          */
         for (count1 = bufferIndex; count1 < 4; count1++) {
                 plaintext[count1] = (4 - bufferIndex);
         }
         krc2->rc2_encrypt (plaintext);
         for (count1 = 0; count1 < 4; count1++) {
                 ciphertext[count1] = iv[count1] ^ plaintext[count1];
                 if (putc ((unsigned char) (ciphertext[count1] >> 8), fd) == EOF) retval = PWERR_DATA;
                 if (putc ((unsigned char) (ciphertext[count1] & 0xff), fd) == EOF) retval = PWERR_DATA;
         }
 
         fclose (fd);
         free(buffer);
         return retval;
 }
 
 void ZSafe::quitMe ()
 {
     qWarning ("QUIT...");
 
     if (modified)
     {
       switch( QMessageBox::information( this, tr("ZSafe"),
                                       tr("Do you want to save\nbefore exiting?"),
                                       tr("&Save"), 
                                       tr("S&ave with\nnew\npassword"),
                                       tr("&Don't Save"), 
                                       0      // Enter == button 0
                                       ) ) 
       { // Escape == button 2
       case 0: // Save clicked, Alt-S or Enter pressed.
         // save
         modified = false;
         saveDocument(filename, FALSE);
         exitZs (1);
         break;
       case 1: // 
         // Save with new password
         modified = false;
         saveDocument(filename, TRUE);
         exitZs (1);
         break;
       case 2: // Don't Save clicked or Alt-D pressed
         // don't save but exitZs
         exitZs (1);
         break;
       }
     }
     exitZs (1);
 
 }
 
 void ZSafe::categoryFieldActivated( const QString& category)
 {
    if (categoryDialog)
       setCategoryDialogFields(categoryDialog, category);
 }
 
 void ZSafe::addCategory()
 {
     if (filename.isEmpty())
     {
        QMessageBox::critical( 0, tr("ZSafe"),
          tr("No document defined.\nYou have to create a new document"));
        return;
     }
     else
     {
        // open the 'Category' dialog
         bool initIcons = false;
        // open the 'Category' dialog
         CategoryDialog *dialog;
         if (categoryDialog)
         {
            dialog = categoryDialog;
         }
         else
         {
            categoryDialog = new CategoryDialog(this, tr("Category"), TRUE);
 #ifdef WIN32
            categoryDialog->setCaption ("Qt " + tr("Category"));
 #endif
            dialog = categoryDialog;
            connect( dialog->CategoryField, 
                     SIGNAL( activated ( const QString &)),
                     this, SLOT( categoryFieldActivated( const QString & ) ) );
            initIcons = true;
         }
 
 #ifdef DESKTOP
 #ifndef WIN32
         QStringList list = conf->entryList( APP_KEY+"/fieldDefs" );
 #else
         // read all categories from the config file and store
         // into a list
         QFile f (cfgFile);
         QStringList list;
         if ( f.open(IO_ReadOnly) ) {    // file opened successfully
            QTextStream t( &f );        // use a text stream
            QString s;
            int n = 1;
            while ( !t.eof() ) {        // until end of file...
                s = t.readLine();       // line of text excluding '\n'
                list.append(s);
            }
            f.close();
         }
 #endif
 #else           
         // read all categories from the config file and store
         // into a list
         QFile f (cfgFile);
         QStringList list;
         if ( f.open(IO_ReadOnly) ) {    // file opened successfully
            QTextStream t( &f );        // use a text stream
            QString s;
            while ( !t.eof() ) {        // until end of file...
                s = t.readLine();       // line of text excluding '\n'
                list.append(s);
            }
            f.close();
         }
 #endif
         QStringList::Iterator it = list.begin();
         QString categ;
+        QString firstCategory;
         dialog->CategoryField->clear(); // remove all items
         while( it != list.end() ) 
         {
            QString *cat = new QString (*it);
            if (cat->contains("-field1", FALSE))
            { 
 #ifdef DESKTOP
 #ifndef WIN32
               categ = cat->section ("-field1", 0, 0);
 #else
               int pos = cat->find ("-field1");
                           categ = cat->left (pos);
 #endif
 #else
               int pos = cat->find ("-field1");
               cat->truncate(pos);
               categ = *cat;
 #endif
               if (!categ.isEmpty())
               {
                  dialog->CategoryField->insertItem (categ, -1);
+                 if (firstCategory.isEmpty())
+                    firstCategory = categ;
               }
            }
            ++it;
         }
 
 
-        setCategoryDialogFields(dialog);
+        if (firstCategory.isEmpty())
+           setCategoryDialogFields(dialog);
+        else
+           setCategoryDialogFields(dialog, firstCategory);
 
         // CategoryDialog *dialog = new CategoryDialog(this, "Category", TRUE);
 
            if (initIcons)
            {
                 Wait waitDialog(this, tr("Wait dialog"));
                 waitDialog.waitLabel->setText(tr("Gathering icons..."));
                 waitDialog.show();
                 qApp->processEvents();
 
 #ifdef DESKTOP
                 QDir d(iconPath);
 #else
                 QDir d(QPEApplication::qpeDir() + "/pics/");
 #endif
                 d.setFilter( QDir::Files);
 
                 const QFileInfoList *list = d.entryInfoList();
                 QFileInfoListIterator it( *list );      // create list iterator
                 QFileInfo *fi;                          // pointer for traversing
 
                 dialog->IconField->insertItem("predefined");
                 while ( (fi=it.current()) ) {           // for each file...
                         QString fileName = fi->fileName();
                         if(fileName.right(4) == ".png"){
                                 fileName = fileName.mid(0,fileName.length()-4);
 #ifdef DESKTOP
                                 QPixmap imageOfFile;
                                 imageOfFile.load(iconPath + fi->fileName());
 #else
                                 QPixmap imageOfFile(Resource::loadPixmap(fileName));
 #endif
                                 QImage foo = imageOfFile.convertToImage();
                                 foo = foo.smoothScale(16,16);
                                 imageOfFile.convertFromImage(foo);
                                 dialog->IconField->insertItem(imageOfFile,fileName);
                         }
                         ++it;
                 }
                 waitDialog.hide();
            }
         
 #ifndef WIN32
         dialog->show();
 #endif
 #ifndef DESKTOP
         // dialog->move (20, 100);
 #endif
         DialogCode result = (DialogCode) dialog->exec();
 #ifdef DESKTOP
        result = Accepted;
 #endif
 
         QString category;
         QString icon;
         QString fullIconPath;
         QPixmap *pix;
         if (result == Accepted)
         {
            modified = true;
            category = dialog->CategoryField->currentText();
            icon = dialog->IconField->currentText()+".png";
 
            qWarning (category);
 
            QListViewItem *li = new ShadedListItem( 1, ListView );
            Category *c1 = new Category();
            c1->setCategoryName(category);
 
            // if (!icon.isEmpty() && !icon.isNull())
            if (icon != "predefined.png")
            {
                // build the full path
                fullIconPath = iconPath + icon;
                pix = new QPixmap (fullIconPath);
                // pix->resize(14, 14); 
                if (pix)
                {
                   // save the full pixmap name into the config file
 // #ifndef WIN32
                   conf->writeEntry(APP_KEY+category, icon);
 // #endif
                   saveConf();
                   QImage img = pix->convertToImage();
                   pix->convertFromImage(img.smoothScale(14,14));
                   c1->setIcon (*pix);
                   c1->setIconName(icon);
                }
                else
                {
                   QPixmap folder( ( const char** ) general_data );
                   c1->setIcon (folder);
                }
            }
            else
            {
               c1->setIcon (*getPredefinedIcon(category));
            }
 
            c1->setListItem (li);
            c1->initListItem();
            categories.insert (c1->getCategoryName(), c1);
 
            saveCategoryDialogFields(dialog);
         }
         else
         {
            // delete dialog;
            dialog->hide();
            return;
         }
 
     }
 
 }
 
 void ZSafe::delCategory()
 {
     if (!selectedItem)
        return;
     if (isCategory(selectedItem))
     {
        switch( QMessageBox::information( this, tr("ZSafe"),
                                       tr("Do you want to delete?"),
                                       tr("&Delete"), tr("D&on't Delete"), 
                                       0      // Enter == button 0
                                       ) ) { // Escape == button 2
        case 0: // Delete clicked, Alt-S or Enter pressed.
           // Delete from the category list
           modified = true;
           categories.remove (selectedItem->text(0));
 // #ifndef WIN32
           conf->removeEntry (selectedItem->text(0));
 // #endif
           saveConf();
 
           // Delete the selected item and all subitems
           // step through all subitems
           QListViewItem *si;
           for (si = selectedItem->firstChild();
                si != NULL; )
           {
               QListViewItem *_si = si;
               si = si->nextSibling();
               selectedItem->takeItem(_si); // remove from view list
               if (_si) delete _si;
           }
           ListView->takeItem(selectedItem);
           delete selectedItem;
 
           selectedItem = NULL;
           break;
        case 1: // Don't delete
           break;
        }
 
     }
 }
 
 void ZSafe::setCategoryDialogFields(CategoryDialog *dialog)
 {
-   dialog->Field1->setText(getFieldLabel (selectedItem, "1", tr("Name")));
-   dialog->Field2->setText(getFieldLabel (selectedItem, "2", tr("Username")));
-   dialog->Field3->setText(getFieldLabel (selectedItem, "3", tr("Password")));
-   dialog->Field4->setText(getFieldLabel (selectedItem, "4", tr("Comment")));
-   dialog->Field5->setText(getFieldLabel (selectedItem, "5", tr("Field 4")));
-   dialog->Field6->setText(getFieldLabel (selectedItem, "6", tr("Field 5")));
+   if (!dialog)
+      return;
 
    QString icon;
-   Category *cat= categories.find (selectedItem->text(0));
-   if (cat)
+   if (selectedItem) 
    {
-      icon = cat->getIconName();
+      dialog->Field1->setText(getFieldLabel (selectedItem, "1", tr("Name")));
+      dialog->Field2->setText(getFieldLabel (selectedItem, "2", tr("Username")));
+      dialog->Field3->setText(getFieldLabel (selectedItem, "3", tr("Password")));
+      dialog->Field4->setText(getFieldLabel (selectedItem, "4", tr("Comment")));
+      dialog->Field5->setText(getFieldLabel (selectedItem, "5", tr("Field 4")));
+      dialog->Field6->setText(getFieldLabel (selectedItem, "6", tr("Field 5")));
+
+      Category *cat= categories.find (selectedItem->text(0));
+      if (cat)
+      {
+         icon = cat->getIconName();
+      }
+   }
+   else
+   {
+      dialog->Field1->setText(tr("Name"));
+      dialog->Field2->setText(tr("Username"));
+      dialog->Field3->setText(tr("Password"));
+      dialog->Field4->setText(tr("Comment"));
+      dialog->Field5->setText(tr("Field 4"));
+      dialog->Field6->setText(tr("Field 5"));
    }
 
 #ifdef DESKTOP
         QDir d(iconPath);
 #else
         QDir d(QPEApplication::qpeDir() + "/pics/");
 #endif
         d.setFilter( QDir::Files);
 
         const QFileInfoList *list = d.entryInfoList();
         int i=0;
         QFileInfoListIterator it( *list );      // create list iterator
         QFileInfo *fi;                          // pointer for traversing
    if (icon.isEmpty() || icon.isNull())
    {
       dialog->IconField->setCurrentItem(0);
    }
    else
    {
                 while ( (fi=it.current()) ) 
       { // for each file...
                         QString fileName = fi->fileName();
                         if(fileName.right(4) == ".png")
                         {
                         fileName = fileName.mid(0,fileName.length()-4);
 
                         if(fileName+".png"==icon) 
          {
             dialog->IconField->setCurrentItem(i+1);
             break;
          }
                            ++i;
                         }
                         ++it;
                 }
         }
 }
 
 void ZSafe::setCategoryDialogFields(CategoryDialog *dialog, QString category)
 {
+   if (!dialog)
+      return;
+
    dialog->Field1->setText(getFieldLabel (category, "1", tr("Name")));
    dialog->Field2->setText(getFieldLabel (category, "2", tr("Username")));
    dialog->Field3->setText(getFieldLabel (category, "3", tr("Password")));
    dialog->Field4->setText(getFieldLabel (category, "4", tr("Comment")));
    dialog->Field5->setText(getFieldLabel (category, "5", tr("Field 4")));
    dialog->Field6->setText(getFieldLabel (category, "6", tr("Field 5")));
 
    QString icon;
    Category *cat= categories.find (category);
    if (cat)
    {
       icon = cat->getIconName();
    }
 
 #ifdef DESKTOP
         QDir d(iconPath);
 #else
         QDir d(QPEApplication::qpeDir() + "/pics/");
 #endif
         d.setFilter( QDir::Files);
 
         const QFileInfoList *list = d.entryInfoList();
         int i=0;
         QFileInfoListIterator it( *list );      // create list iterator
         QFileInfo *fi;                          // pointer for traversing
    if (icon.isEmpty() || icon.isNull())
    {
       dialog->IconField->setCurrentItem(0);
    }
    else
    {
                 while ( (fi=it.current()) ) 
       { // for each file...
                         QString fileName = fi->fileName();
                         if(fileName.right(4) == ".png")
                         {
                         fileName = fileName.mid(0,fileName.length()-4);
 
                         if(fileName+".png"==icon) 
          {
             dialog->IconField->setCurrentItem(i+1);
             break;
          }
                            ++i;
                         }
                         ++it;
                 }
         }
 }
 
 void ZSafe::saveCategoryDialogFields(CategoryDialog *dialog)
 {
    QString app_key = APP_KEY;
 #ifndef DESKTOP
    conf->setGroup ("fieldDefs");
 #else
 #ifndef WIN32
    app_key += "/fieldDefs/";
 #endif
 #endif
    QString category = dialog->CategoryField->currentText();
 // #ifndef WIN32
    conf->writeEntry(app_key+category+"-field1", dialog->Field1->text());
    conf->writeEntry(app_key+category+"-field2", dialog->Field2->text());
    conf->writeEntry(app_key+category+"-field3", dialog->Field3->text());
    conf->writeEntry(app_key+category+"-field4", dialog->Field4->text());
    conf->writeEntry(app_key+category+"-field5", dialog->Field5->text());
    conf->writeEntry(app_key+category+"-field6", dialog->Field6->text());
 // #endif
    saveConf();
 #ifndef DESKTOP
    conf->setGroup ("zsafe");
 #endif
 }
 
 void ZSafe::editCategory()
 {
     if (!selectedItem)
        return;
     if (isCategory(selectedItem))
     {
         QString category = selectedItem->text(0);
         bool initIcons = false;
         // open the 'Category' dialog
         CategoryDialog *dialog;
         if (categoryDialog)
         {
            dialog = categoryDialog;
         }
         else
         {
            categoryDialog = new CategoryDialog(this, tr("Category"), TRUE);
 #ifdef WIN32
            categoryDialog->setCaption ("Qt " + tr("Category"));
 #endif
            dialog = categoryDialog;
            connect( dialog->CategoryField, 
                     SIGNAL( activated ( const QString &)),
                     this, SLOT( categoryFieldActivated( const QString & ) ) );
            initIcons = true;
         }
         setCategoryDialogFields(dialog);
 
 #ifdef DESKTOP
 #ifndef WIN32
         QStringList list = conf->entryList( APP_KEY+"/fieldDefs" );
 #else
         // read all categories from the config file and store
         // into a list
         QFile f (cfgFile);
         QStringList list;
         if ( f.open(IO_ReadOnly) ) {    // file opened successfully
            QTextStream t( &f );        // use a text stream
            QString s;
            int n = 1;
            while ( !t.eof() ) {        // until end of file...
                s = t.readLine();       // line of text excluding '\n'
                list.append(s);
            }
            f.close();
         }
 #endif
 #else
         // read all categories from the config file and store
         // into a list
         QFile f (cfgFile);
         QStringList list;
         if ( f.open(IO_ReadOnly) ) {    // file opened successfully
            QTextStream t( &f );        // use a text stream
            QString s;
            while ( !t.eof() ) {        // until end of file...
                s = t.readLine();       // line of text excluding '\n'
                list.append(s);
            }
            f.close();
         }
 #endif
         QStringList::Iterator it = list.begin();
         QString categ;
         dialog->CategoryField->clear(); // remove all items
         int i=0;
         bool foundCategory = false;
         while( it != list.end() ) 
         {
            QString *cat = new QString (*it);
            if (cat->contains("-field1", FALSE))
            { 
 #ifdef DESKTOP
 #ifndef WIN32
               categ = cat->section ("-field1", 0, 0);
 #else
                   int pos = cat->find ("-field1");
                           categ = cat->left (pos);
 #endif
 #else
               int pos = cat->find ("-field1");
               cat->truncate(pos);
               categ = *cat;
 #endif
               if (!categ.isEmpty())
               {
                  dialog->CategoryField->insertItem (categ, i);
                  if (category.compare(categ) == 0)
                  {
                      dialog->CategoryField->setCurrentItem(i);
                      foundCategory = true;
                  }
                  i++;
               }
            }
            ++it;
         }
         if (!foundCategory)
         {
             dialog->CategoryField->insertItem (category, i);
             dialog->CategoryField->setCurrentItem(i);
         }
 
         QString icon;
         Category *cat= categories.find (selectedItem->text(0));
         if (cat)
         {
            icon = cat->getIconName();
         }
 
            if (initIcons)
            {
 
                 Wait waitDialog(this, tr("Wait dialog"));
                 waitDialog.waitLabel->setText(tr("Gathering icons..."));
                 waitDialog.show();
                 qApp->processEvents();