summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--core/launcher/screensaver.cpp97
1 files changed, 77 insertions, 20 deletions
diff --git a/core/launcher/screensaver.cpp b/core/launcher/screensaver.cpp
index b9bb64c..182084d 100644
--- a/core/launcher/screensaver.cpp
+++ b/core/launcher/screensaver.cpp
@@ -25,246 +25,303 @@ OpieScreenSaver::OpieScreenSaver ( )
m_enable_lightoff_ac = false;
m_enable_suspend_ac = false;
m_onlylcdoff_ac = false;
m_use_light_sensor = false;
m_backlight_sensor = -1;
::memset ( m_sensordata, 0xff, LS_Count * sizeof( m_sensordata [0] ));
m_lcd_status = true;
m_backlight_normal = -1;
m_backlight_current = -1;
m_backlight_forcedoff = false;
m_on_ac = false;
m_level = -1;
// Make sure the LCD is in fact on, (if opie was killed while the LCD is off it would still be off)
ODevice::inst ( )-> setDisplayStatus ( true );
setBacklight ( -1 );
}
+/**
+ * Stops the screen saver
+ */
void OpieScreenSaver::restore()
{
m_level = -1;
if ( !m_lcd_status ) { // We must have turned it off
ODevice::inst ( ) -> setDisplayStatus ( true );
m_lcd_status = true;
}
setBacklightInternal ( -1 );
}
+/**
+ * Starts the screen saver
+ *
+ * @param level what level of screen saving should happen (0=lowest non-off, 1=off,
+ * 2=suspend whole machine)
+ * @returns true on success
+ */
bool OpieScreenSaver::save( int level )
{
m_level = level;
switch ( level ) {
case 0:
if (( m_on_ac && m_enable_dim_ac ) ||
( !m_on_ac && m_enable_dim )) {
if (( m_disable_suspend > 0 ) && ( m_backlight_current > 1 ) && !m_use_light_sensor )
setBacklightInternal ( 1 ); // lowest non-off
}
return true;
break;
case 1:
if (( m_on_ac && m_enable_lightoff_ac ) ||
( !m_on_ac && m_enable_lightoff )) {
if ( m_disable_suspend > 1 )
setBacklightInternal ( 0 ); // off
}
return true;
break;
case 2:
if (( m_on_ac && !m_enable_suspend_ac ) ||
( !m_on_ac && !m_enable_suspend )) {
return true;
}
if (( m_on_ac && m_onlylcdoff_ac ) ||
( !m_on_ac && m_onlylcdoff )) {
ODevice::inst ( ) -> setDisplayStatus ( false );
m_lcd_status = false;
return true;
}
// We're going to suspend the whole machine
if (( m_disable_suspend > 2 ) && !Network::networkOnline ( )) {
+ // TODO: why is this key F34 hard coded? -- schurig
+ // Does this now only work an devices with a ODevice::filter?
QWSServer::sendKeyEvent( 0xffff, Qt::Key_F34, FALSE, TRUE, FALSE );
return true;
}
break;
}
return false;
}
-void OpieScreenSaver::setIntervals ( int i1, int i2, int i3 )
+/**
+ * Set intervals in seconds for automatic dimming, light off and suspend
+ *
+ * This function also sets the member variables m_m_enable_dim[_ac],
+ * m_enable_lightoff[_ac], m_enable_suspend[_ac], m_onlylcdoff[_ac]
+ *
+ * @param dim time in seconds to dim, -1 to read value from config file,
+ * 0 to disable
+ * @param lightoff time in seconds to turn LCD backlight off, -1 to
+ * read value from config file, 0 to disable
+ * @param suspend time in seconds to do an APM suspend, -1 to
+ * read value from config file, 0 to disable
+ */
+void OpieScreenSaver::setIntervals ( int dim, int lightoff, int suspend )
{
Config config ( "apm" );
config. setGroup ( m_on_ac ? "AC" : "Battery" );
int v[ 4 ];
- if ( i1 < 0 )
- i1 = config. readNumEntry ( "Dim", m_on_ac ? 60 : 30 );
- if ( i2 < 0 )
- i2 = config. readNumEntry ( "LightOff", m_on_ac ? 120 : 20 );
- if ( i3 < 0 )
- i3 = config. readNumEntry ( "Suspend", m_on_ac ? 0 : 60 );
+ if ( dim < 0 )
+ dim = config. readNumEntry ( "Dim", m_on_ac ? 60 : 30 );
+ if ( lightoff < 0 )
+ lightoff = config. readNumEntry ( "LightOff", m_on_ac ? 120 : 20 );
+ if ( suspend < 0 )
+ suspend = config. readNumEntry ( "Suspend", m_on_ac ? 0 : 60 );
if ( m_on_ac ) {
- m_enable_dim_ac = ( i1 > 0 );
- m_enable_lightoff_ac = ( i2 > 0 );
- m_enable_suspend_ac = ( i3 > 0 );
+ m_enable_dim_ac = ( dim > 0 );
+ m_enable_lightoff_ac = ( lightoff > 0 );
+ m_enable_suspend_ac = ( suspend > 0 );
m_onlylcdoff_ac = config.readBoolEntry ( "LcdOffOnly", false );
}
else {
- m_enable_dim = ( i1 > 0 );
- m_enable_lightoff = ( i2 > 0 );
- m_enable_suspend = ( i3 > 0 );
+ m_enable_dim = ( dim > 0 );
+ m_enable_lightoff = ( lightoff > 0 );
+ m_enable_suspend = ( suspend > 0 );
m_onlylcdoff = config.readBoolEntry ( "LcdOffOnly", false );
}
- //qDebug("screen saver intervals: %d %d %d", i1, i2, i3);
+ //qDebug("screen saver intervals: %d %d %d", dim, lightoff, suspend);
- v [ 0 ] = QMAX( 1000 * i1, 100 );
- v [ 1 ] = QMAX( 1000 * i2, 100 );
- v [ 2 ] = QMAX( 1000 * i3, 100 );
+ v [ 0 ] = QMAX( 1000 * dim, 100 );
+ v [ 1 ] = QMAX( 1000 * lightoff, 100 );
+ v [ 2 ] = QMAX( 1000 * suspend, 100 );
v [ 3 ] = 0;
- if ( !i1 && !i2 && !i3 )
+ if ( !dim && !lightoff && !suspend )
QWSServer::setScreenSaverInterval( 0 );
else
QWSServer::setScreenSaverIntervals( v );
}
+/**
+ * Set suspend time. Will read the dim and lcd-off times from the config file.
+ *
+ * @param suspend time in seconds to go into APM suspend, -1 to
+ * read value from config file, 0 to disable
+ */
void OpieScreenSaver::setInterval ( int interval )
{
setIntervals ( -1, -1, interval );
}
void OpieScreenSaver::setMode ( int mode )
{
if ( mode > m_disable_suspend )
setInterval ( -1 );
m_disable_suspend = mode;
}
+/**
+ * Set display brightness
+ *
+ * Get's default values for backlight and light sensor from config file.
+ *
+ * @param bright desired brighness (-1 to use automatic sensor data or value
+ * from config file, -2 to toggle backlight on and off, -3 to
+ * force backlight off)
+ */
void OpieScreenSaver::setBacklight ( int bright )
{
// Read from config
Config config ( "apm" );
config. setGroup ( m_on_ac ? "AC" : "Battery" );
m_backlight_normal = config. readNumEntry ( "Brightness", m_on_ac ? 255 : 127 );
-
m_use_light_sensor = config. readBoolEntry ( "LightSensor", false );
//qDebug ( "setBacklight: %d (norm: %d) (ls: %d)", bright, m_backlight_normal, m_use_light_sensor ? 1 : 0 );
killTimers ( );
if (( bright < 0 ) && m_use_light_sensor ) {
QStringList sl = config. readListEntry ( "LightSensorData", ';' );
m_sensordata [LS_SensorMin] = 40;
m_sensordata [LS_SensorMax] = 215;
m_sensordata [LS_LightMin] = 1;
m_sensordata [LS_LightMax] = 255;
m_sensordata [LS_Steps] = 12;
m_sensordata [LS_Interval] = 2000;
for ( uint i = 0; i < LS_Count; i++ ) {
if ( i < sl. count ( ))
m_sensordata [i] = sl [i]. toInt ( );
}
if ( m_sensordata [LS_Steps] < 2 ) // sanity check to avoid SIGFPE
m_sensordata [LS_Steps] = 2;
timerEvent ( 0 );
startTimer ( m_sensordata [LS_Interval] );
}
setBacklightInternal ( bright );
}
+/**
+ * Internal brightness setting method
+ *
+ * Get's default values for backlight and light sensor from config file.
+ *
+ * @param bright desired brighness (-1 to use automatic sensor data or value
+ * from config file, -2 to toggle backlight on and off, -3 to
+ * force backlight off)
+ */
void OpieScreenSaver::setBacklightInternal ( int bright )
{
if ( bright == -3 ) {
// Forced on
m_backlight_forcedoff = false;
bright = -1;
}
if ( m_backlight_forcedoff && bright != -2 )
return ;
if ( bright == -2 ) {
// Toggle between off and on
bright = m_backlight_current ? 0 : -1;
m_backlight_forcedoff = !bright;
}
if ( bright == -1 )
bright = m_use_light_sensor ? m_backlight_sensor : m_backlight_normal;
if ( bright != m_backlight_current ) {
ODevice::inst ( )-> setDisplayBrightness ( bright );
m_backlight_current = bright;
}
}
+/**
+ * Timer event used for automatic setting the backlight according to a light sensor
+ * and to set the default brightness
+ */
void OpieScreenSaver::timerEvent ( QTimerEvent * )
{
int s = ODevice::inst ( )-> readLightSensor ( ) * 256 / ODevice::inst ( )-> lightSensorResolution ( );
if ( s < m_sensordata [LS_SensorMin] )
m_backlight_sensor = m_sensordata [LS_LightMax];
else if ( s >= m_sensordata [LS_SensorMax] )
m_backlight_sensor = m_sensordata [LS_LightMin];
else {
int dx = m_sensordata [LS_SensorMax] - m_sensordata [LS_SensorMin];
int dy = m_sensordata [LS_LightMax] - m_sensordata [LS_LightMin];
int stepno = ( s - m_sensordata [LS_SensorMin] ) * m_sensordata [LS_Steps] / dx; // dx is never 0
m_backlight_sensor = m_sensordata [LS_LightMax] - dy * stepno / ( m_sensordata [LS_Steps] - 1 );
}
//qDebug ( "f(%d) = %d [%d - %d] -> [%d - %d] / %d", s, m_backlight_sensor, m_sensordata [LS_SensorMin], m_sensordata [LS_SensorMax], m_sensordata [LS_LightMin], m_sensordata [LS_LightMax], m_sensordata [LS_Steps] );
if ( m_level <= 0 )
setBacklightInternal ( -1 );
}
+/**
+ * Like ODevice::setDisplayStatus(), but keep current state in m_lcd_status.
+ */
void OpieScreenSaver::setDisplayState ( bool on )
{
if ( m_lcd_status != on ) {
ODevice::inst ( ) -> setDisplayStatus ( on );
m_lcd_status = on;
}
}
+/**
+ * Set display to default ac/battery settings when power status changed.
+ */
void OpieScreenSaver::powerStatusChanged ( PowerStatus ps )
{
bool newonac = ( ps. acStatus ( ) == PowerStatus::Online );
if ( newonac != m_on_ac ) {
m_on_ac = newonac;
setInterval ( -1 );
setBacklight ( -1 );
restore ( );
}
}
-