2 files changed, 88 insertions, 12 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index e24e043..bc09e92 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -119,48 +119,51 @@ public:
         static bool isJornada();
 
 };
 
 class Zaurus : public ODevice {
 protected:
         virtual void init ( );
         virtual void initButtons ( );
 
 public:
         virtual bool setSoftSuspend ( bool soft );
 
         virtual bool setDisplayBrightness ( int b );
         virtual int displayBrightnessResolution ( ) const;
 
         virtual void alarmSound ( );
         virtual void keySound ( );
         virtual void touchSound ( );
 
         virtual QValueList <OLed> ledList ( ) const;
         virtual QValueList <OLedState> ledStateList ( OLed led ) const;
         virtual OLedState ledState ( OLed led ) const;
         virtual bool setLedState ( OLed led, OLedState st );
 
+        virtual bool hasHingeSensor() const;
+        virtual OHingeStatus readHingeSensor();
+
         static bool isZaurus();
         
         // Does this break BC? 
         virtual bool suspend ( );
         virtual Transformation rotation ( ) const;
         virtual ODirection direction ( ) const;
 
 protected:
         virtual void buzzer ( int snd );
 
         OLedState m_leds [1];
         bool m_embedix;
 };
 
 class SIMpad : public ODevice, public QWSServer::KeyboardFilter {
 protected:
         virtual void init ( );
         virtual void initButtons ( );
 
 public:
         virtual bool setSoftSuspend ( bool soft );
         virtual bool suspend();
 
         virtual bool setDisplayStatus( bool on );
@@ -802,64 +805,80 @@ OLedState ODevice::ledState ( OLed /*which*/ ) const
 }
 
 /**
  * Set the state for a LED
  * @param which Which OLed to use
  * @param st The state to set
  * @return success or failure
  */
 bool ODevice::setLedState ( OLed which, OLedState st )
 {
         Q_UNUSED( which )
         Q_UNUSED( st    )
         return false;
 }
 
 /**
  * @return if the device has a light sensor
  */
 bool ODevice::hasLightSensor ( ) const
 {
         return false;
 }
 
 /**
- * @return a value from the light senso
+ * @return a value from the light sensor
  */
 int ODevice::readLightSensor ( )
 {
         return -1;
 }
 
 /**
- * @return the light sensor resolution whatever that is ;)
+ * @return the light sensor resolution
  */
 int ODevice::lightSensorResolution ( ) const
 {
         return 0;
 }
 
 /**
+ * @return if the device has a hinge sensor
+ */
+bool ODevice::hasHingeSensor ( ) const
+{
+        return false;
+}
+
+/**
+ * @return a value from the hinge sensor
+ */
+OHingeStatus ODevice::readHingeSensor ( )
+{
+        return CASE_UNKNOWN;
+}
+
+/**
  * @return a list with CPU frequencies supported by the hardware
  */
 const QStrList &ODevice::allowedCpuFrequencies ( ) const
 {
         return *d->m_cpu_frequencies;
 }
 
 
 /**
  * Set desired CPU frequency
  * 
  * @param index index into d->m_cpu_frequencies of the frequency to be set
  */
 bool ODevice::setCurrentCpuFrequency(uint index)
 {
         if (index >= d->m_cpu_frequencies->count())
                 return false;
 
         char *freq = d->m_cpu_frequencies->at(index);
         qWarning("set freq to %s", freq);
 
         int fd;
 
         if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) {
@@ -1924,68 +1943,84 @@ bool Zaurus::setSoftSuspend ( bool soft )
                         if ( soft )
                                 sources &= ~APM_EVT_POWER_BUTTON;
                         else
                                 sources |= APM_EVT_POWER_BUTTON;
 
                         if ( ::ioctl ( fd, APM_IOCSEVTSRC, sources ) >= 0 ) // set new event sources
                                 res = true;
                         else
                                 perror ( "APM_IOCGEVTSRC" );
                 }
                 else
                         perror ( "APM_IOCGEVTSRC" );
 
                 ::close ( fd );
         }
         else
                 perror ( "/dev/apm_bios or /dev/misc/apm_bios" );
 
     return res;
 }
 
 
 bool Zaurus::setDisplayBrightness ( int bright )
 {
-// FIXME The C7x0 have a proc-interface (/proc/drivers/corgi-bl) which
-//       is nice to use. Currently it exposes 16+1 levels. Implement this!
-//       (or wait for kergoth unifying the interfaces in the OpenZaurus kernel.)
         bool res = false;
         int fd;
 
-        if ( bright > 255 )
-                bright = 255;
-        if ( bright < 0 )
-                bright = 0;
+    if ( bright > 255 ) bright = 255;
+    if ( bright < 0 ) bright = 0;
 
-        if (m_embedix) {
+    if ( m_embedix )
+    {
+        if ( d->m_model == Model_Zaurus_SLC7x0 )
+        {
+            // special treatment for devices with the corgi backlight interface
+            if (( fd = ::open ( "/proc/driver/fl/corgi-bl", O_WRONLY )) >= 0 )
+            {
+                if ( bright > 0x11 ) bright = 0x11;
+                char writeCommand[100];
+                const int count = sprintf( writeCommand, "0x%x\n", bright );
+                res = ( ::write ( fd, writeCommand, count ) != -1 );
+                ::close ( fd );
+            }
+            return res;
+        }
+        else
+        {
+            // standard treatment for devices with the dumb embedix frontlight interface
                 if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
                         int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
                         if ( bright && !bl )
                                 bl = 1;
                         res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
                         ::close ( fd );
                 }
-        } else {
+        }
+    }
+    else
+    {
+        // special treatment for the OpenZaurus unified interface
 #define FB_BACKLIGHT_SET_BRIGHTNESS     _IOW('F', 1, u_int)             /* set brightness */
                 if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) {
                         res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 );
                         ::close ( fd );
                 }
         }
         return res;
 }
 
 bool Zaurus::suspend ( )
 {
         qDebug("ODevice::suspend");
         if ( !isQWS( ) ) // only qwsserver is allowed to suspend
                 return false;
 
         if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
                 return false;
 
         bool res = false;
 
         struct timeval tvs, tvn;
         ::gettimeofday ( &tvs, 0 );
 
         ::sync ( ); // flush fs caches
@@ -2052,53 +2087,84 @@ ODirection Zaurus::direction ( ) const
                         } else {
                                 retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION);
                                 ::close (handle);
                                 if (retval == 2 )
                                         dir = CCW;
                                 else
                                         dir = CW;
                         }
                         break;
                 case Model_Zaurus_SLA300:
                 case Model_Zaurus_SLB600:
                 case Model_Zaurus_SL5500:
                 case Model_Zaurus_SL5000:
                 default:
                         dir = d-> m_direction;
                         break;
         }
         return dir;
 
 }
 
 int Zaurus::displayBrightnessResolution ( ) const
 {
         if (m_embedix)
-                return 5;
+                return d->m_model == Model_Zaurus_SLC7x0 ? 18 : 5;
         else
                 return 256;
 }
 
+bool Zaurus::hasHingeSensor() const
+{
+    return d->m_model == Model_Zaurus_SLC7x0;
+}
+
+OHingeStatus Zaurus::readHingeSensor()
+{
+    int handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK);
+    if (handle == -1)
+    {
+        qWarning("Zaurus::readHingeSensor() - failed (%s)", "unknown reason" ); //FIXME: use strerror
+        return CASE_UNKNOWN;
+    }
+    else
+    {
+        int retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION);
+        ::close (handle);
+        if ( retval == CASE_CLOSED || retval == CASE_PORTRAIT || retval == CASE_LANDSCAPE )
+        {
+            qDebug( "Zaurus::readHingeSensor() - result = %d", retval );
+            return static_cast<OHingeStatus>( retval );
+        }
+        else
+        {
+            qWarning("Zaurus::readHingeSensor() - couldn't compute hinge status!" );
+            return CASE_UNKNOWN;
+        }
+    }
+}
+
+
 /**************************************************
  *
  * SIMpad
  *
  **************************************************/
 
 void SIMpad::init ( )
 {
         d-> m_vendorstr = "SIEMENS";
         d-> m_vendor = Vendor_SIEMENS;
 
         QFile f ( "/proc/hal/model" );
 
     //TODO Implement model checking
     //FIXME For now we assume an SL4
 
     d-> m_modelstr = "SL4";
     d-> m_model = Model_SIMpad_SL4;
 
         switch ( d-> m_model ) {
                 default:
                         d-> m_rotation = Rot0;
                         d-> m_direction = CCW;
                         d-> m_holdtime = 1000; // 1000ms
diff --git a/libopie/odevice.h b/libopie/odevice.h
index 8273761..ee0b0ec 100644
--- a/libopie/odevice.h
+++ b/libopie/odevice.h
@@ -122,48 +122,55 @@ enum OLed {
         Led_Power,
         Led_BlueTooth
 };
 
 enum OHardKey {
         HardKey_Datebook  = Qt::Key_F9,
         HardKey_Contacts  = Qt::Key_F10,
         HardKey_Menu      = Qt::Key_F11,
         HardKey_Home      = Qt::Key_F12,
         HardKey_Mail      = Qt::Key_F13,
         HardKey_Record    = Qt::Key_F24,
         HardKey_Suspend   = Qt::Key_F34,
         HardKey_Backlight = Qt::Key_F35,
         HardKey_Action    = Qt::Key_F10,
         HardKey_OK        = Qt::Key_F11,
         HardKey_End       = Qt::Key_F12,
 };
 
 enum ODirection {
         CW   = 0,
         CCW  = 1,
         Flip = 2,
 };
 
+enum OHingeStatus {
+    CASE_CLOSED = 3,
+    CASE_PORTRAIT = 2,
+    CASE_LANDSCAPE = 0,
+    CASE_UNKNOWN = 1,
+};
+
 /**
  * A singleton which gives informations about device specefic option
  * like the Hardware used, LEDs, the Base Distribution and
  * hardware key mappings.
  *
  * @short A small class for device specefic options
  * @see QObject
  * @author Robert Griebl
  * @version 1.0
  */
 class ODevice : public QObject {
         Q_OBJECT
 
 private:
         /* disable copy */
         ODevice ( const ODevice & );
 
 protected:
         ODevice ( );
         virtual void init ( );
         virtual void initButtons ( );
 
         ODeviceData *d;
 
@@ -201,48 +208,51 @@ public:
         virtual bool setDisplayContrast ( int contrast );
         virtual int displayContrastResolution ( ) const;
 
         // don't add new virtual methods, use this:
                 ///*virtual */ void boo(int i ) { return virtual_hook(1,&i); };
         // and in your subclass do do overwrite
                 //protected virtual int virtual_hook(int, void *)
         // which is defined below
 
 // input / output
         //FIXME playAlarmSound and al might be better -zecke
         virtual void alarmSound ( );
         virtual void keySound ( );
         virtual void touchSound ( );
 
         virtual QValueList <OLed> ledList ( ) const;
         virtual QValueList <OLedState> ledStateList ( OLed led ) const;
         virtual OLedState ledState ( OLed led ) const;
         virtual bool setLedState ( OLed led, OLedState st );
 
         virtual bool hasLightSensor ( ) const;
         virtual int readLightSensor ( );
         virtual int lightSensorResolution ( ) const;
 
+        virtual bool hasHingeSensor ( ) const;
+        virtual OHingeStatus readHingeSensor ( );
+
         const QStrList &allowedCpuFrequencies() const;
         bool setCurrentCpuFrequency(uint index);
 
         /**
          * Returns the available buttons on this device.  The number and location
          * of buttons will vary depending on the device.  Button numbers will be assigned
          * by the device manufacturer and will be from most preferred button to least preffered
          * button.  Note that this list only contains "user mappable" buttons.
          */
        const QValueList<ODeviceButton> &buttons ( ) /* ### make const */;
 
         /**
          * Returns the DeviceButton for the \a keyCode.  If \a keyCode is not found, it
          * returns 0L
          */
         const ODeviceButton *buttonForKeycode ( ushort keyCode );
 
         /**
          * Reassigns the pressed action for \a button.  To return to the factory
          * default pass an empty string as \a qcopMessage.
          */
         void remapPressedAction ( int button, const OQCopMessage &qcopMessage );
 
         /**