summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--libopie2/opiecore/device/odevice.cpp64
1 files changed, 60 insertions, 4 deletions
diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp
index 2b10034..ec861ee 100644
--- a/libopie2/opiecore/device/odevice.cpp
+++ b/libopie2/opiecore/device/odevice.cpp
@@ -323,51 +323,56 @@ bool ODevice::setDisplayStatus ( bool on )
#ifdef QT_QWS_DEVFS
if (( fd = ::open ( "/dev/fb/0", O_RDWR )) >= 0 ) {
#else
if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
#endif
res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
::close ( fd );
}
return res;
}
/**
* This sets the display brightness
*
* @param p The brightness to be set on a scale from 0 to 255
* @return success or failure
*/
bool ODevice::setDisplayBrightness ( int p)
{
Q_UNUSED( p )
return false;
}
/**
-* @return returns the number of steppings on the brightness slider
-* in the Light-'n-Power settings.
-*/
+ *
+ * @return Returns the number of steppings on the brightness slider
+ * in the Light-'n-Power settings. Values smaller zero and bigger
+ * than 255 do not make sense.
+ *
+ * \sa QSlider::setLineStep
+ * \sa QSlider::setPageStep
+ */
int ODevice::displayBrightnessResolution() const
{
return 16;
}
/**
* This sets the display contrast
* @param p The contrast to be set on a scale from 0 to 255
* @return success or failure
*/
bool ODevice::setDisplayContrast ( int p)
{
Q_UNUSED( p )
return false;
}
/**
* @return return the max value for the brightness settings slider
* or 0 if the device doesn't support setting of a contrast
*/
int ODevice::displayContrastResolution() const
{
return 0;
}
@@ -690,105 +695,156 @@ void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
// buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction(). data()));
QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
}
void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
{
initButtons();
if ( button >= (int) d->m_buttons->count())
return;
ODeviceButton &b = ( *d->m_buttons ) [button];
b. setHeldAction ( action );
Config buttonFile ( "ButtonSettings" );
buttonFile. setGroup ( "Button" + QString::number ( button ));
buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction(). channel());
buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction(). message());
// buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction(). data()));
QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
}
+
+/**
+ * @internal
+ */
void ODevice::virtual_hook(int, void* ){
}
/**
+ * \brief Send a QCOP Message before suspending
+ *
* Sends a QCOP message to channel QPE/System
* with the message "aboutToSuspend()" if this
- * is the windowing server
+ * is the windowing server.
+ *
+ * Call this in your custom \sa suspend() Method
+ * before going to suspend.
+ *
*/
void ODevice::sendSuspendmsg()
{
if ( isQWS() )
return;
QCopEnvelope ( "QPE/System", "aboutToSuspend()" );
}
/**
* \brief Prepend the QWSServer::KeyboardFilter to the list of installed KeyFilters
*
* Prepend a QWSServer::KeyboardFilter to the List of Keyboard
* Filters. This function is the only way to prepend a KeyFilter.
*
* @param aFilter The KeyFilter to be prepended to the list of filters
*
* @see Opie::Core::OKeyFilter
* @see Opie::Core::OKeyFilter::inst()
*/
void ODevice::addPreHandler(QWSServer::KeyboardFilter*aFilter)
{
Opie::Core::OKeyFilter::inst()->addPreHandler(aFilter);
}
/**
* \brief Remove the QWSServer::KeyboardFilter in the param from the list
*
* Remove the QWSServer::KeyboardFilter \par aFilter from the List
* of Keyfilters. Call this when you delete the KeyFilter!
*
* @param aFilter The filter to be removed from the Opie::Core::OKeyFilter
* @see Opie::Core::ODevice::addPreHandler
*/
void ODevice::remPreHandler(QWSServer::KeyboardFilter*aFilter)
{
Opie::Core::OKeyFilter::inst()->remPreHandler(aFilter);
}
+
+/**
+ * @internal
+ *
+ * @see changeMixerForAlarm
+ */
void ODevice::playingStopped() {
const_cast<QObject*>(sender())->disconnect( this );
#ifndef QT_NO_SOUND
if ( d->m_sound >= 0 ) {
::ioctl ( d->m_sound, MIXER_WRITE( d->m_mixer ), &d->m_vol );
::close ( d->m_sound );
}
#endif
}
+
+/**
+ * \brief Change the Volume for the Alarm and set it back after playing is finished
+ *
+ * If you play an Alarm Sound you might want to change the Mixer to
+ * full volume and ignore the user setting. After it \sa Sound::isFinished
+ * you would turn the volume back to the user preference.
+ * The problem is that we used to enter the event loop while waiting
+ * for the sound to be finished triggering all kind of reentrance
+ * problems what a library shouldn't introduce.
+ * Instead of manually waiting for the sound to be finished use
+ * this Method and it will automatically restore the Mixer to
+ * the user configuration after the sound finished playing.
+ *
+ * Note: The onwership of \param snd is not transfered and playing
+ * is not started in this method. If 'snd' gets deleted before
+ * playing is finished the volume doesn't get set back to
+ * the user preference!
+ *
+ * \code
+ * static Sound snd("alarm");
+ * if(!snd.isFinished())
+ * return;
+ *
+ * changeMixerForAlarm( my_channel, "/dev/mixer", &snd );
+ * snd.play()
+ * \endcode
+ *
+ *
+ *
+ * @param mixer The mixer number/channel to use
+ * @param file The file name. If you convert from QString use QFile::encodeName
+ * @param snd The sound to wait for finishing
+ *
+ */
void ODevice::changeMixerForAlarm( int mixer, const char* file, Sound *snd ) {
#ifndef QT_NO_SOUND
if (( d->m_sound = ::open ( file, O_RDWR )) >= 0 ) {
if ( ::ioctl ( d->m_sound, MIXER_READ( mixer ), &d->m_vol ) >= 0 ) {
Config cfg ( "qpe" );
cfg. setGroup ( "Volume" );
int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
if ( volalarm < 0 )
volalarm = 0;
else if ( volalarm > 100 )
volalarm = 100;
volalarm |= ( volalarm << 8 );
if ( ::ioctl ( d->m_sound, MIXER_WRITE( mixer ), &volalarm ) >= 0 )
register_qpe_sound_finished(snd, this, SLOT(playingStopped()));
}
d->m_mixer = mixer;
}
#endif
}
}
}