summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--noncore/net/networksetup/wlan/wlanimp.cpp9
-rw-r--r--noncore/settings/networksettings/wlan/wlanimp.cpp9
2 files changed, 12 insertions, 6 deletions
diff --git a/noncore/net/networksetup/wlan/wlanimp.cpp b/noncore/net/networksetup/wlan/wlanimp.cpp
index 120d4e5..84e0bae 100644
--- a/noncore/net/networksetup/wlan/wlanimp.cpp
+++ b/noncore/net/networksetup/wlan/wlanimp.cpp
@@ -21,99 +21,102 @@
/**
* Constructor, read in the wireless.opts file for parsing later.
*/
WLANImp::WLANImp( QWidget* parent, const char* name, Interface *i, bool modal, WFlags fl):WLAN(parent, name, modal, fl), currentProfile("*") {
interfaceSetup = new InterfaceSetupImp(tabWidget, "InterfaceSetupImp", i);
tabWidget->insertTab(interfaceSetup, "TCP/IP");
// Read in the config file.
QString wlanFile = WIRELESS_OPTS;
QFile file(wlanFile);
if (file.open(IO_ReadOnly)){
QTextStream stream( &file );
QString line = "";
while ( !stream.eof() ) {
line += stream.readLine();
line += "\n";
}
file.close();
settingsFileText = QStringList::split("\n", line, true);
parseSettingFile();
}
else
qDebug(QString("WLANImp: Can't open file: %1 for reading.").arg(wlanFile).latin1());
connect(networkType, SIGNAL(activated(int)), this, SLOT(typeChanged(int)));
-
}
void WLANImp::typeChanged(int mod){
networkChannel->setEnabled(mod);
channelLabel->setEnabled(mod);
}
/**
* Change the profile for both wireless settings and network settings.
*/
void WLANImp::setProfile(const QString &profile){
interfaceSetup->setProfile(profile);
parseSettingFile();
}
/**
* Parses the settings file that was read in and gets any setting from it.
*/
void WLANImp::parseSettingFile(){
bool foundCase = false;
bool found = false;
for ( QStringList::Iterator it = settingsFileText.begin(); it != settingsFileText.end(); ++it ) {
QString line = (*it).simplifyWhiteSpace();
if(line.contains("case"))
foundCase = true;
// See if we found our scheme to write or the sceme couldn't be found
if((foundCase && line.contains("esac")) ||
(foundCase && line.left(currentProfile.length()+7) == currentProfile + ",*,*,*)" && line.at(0) != '#'))
found = true;
if(line.contains(";;"))
found = false;
if(found){
// write out scheme
if(line.contains("ESSID=")){
QString id = line.mid(line.find("ESSID=")+6, line.length());
if(id == "any"){
essAny->setChecked(false);
}else{
essAny->setChecked(true);
essSpecificLineEdit->setText(id);
}
}
if(line.contains("MODE=")){
QString mode = line.mid(line.find("MODE=")+5, line.length());
if(mode == "Managed"){
networkType->setCurrentItem(0);
+ channelLabel->setEnabled(false);
+ networkChannel->setEnabled(false);
}
else{
- networkType->setCurrentItem(0);
+ networkType->setCurrentItem(1);
+ networkChannel->setEnabled(true);
+ channelLabel->setEnabled(true);
}
}
if(line.contains("KEY0="))
keyLineEdit0->setText(line.mid(5, line.length()));
if(line.contains("KEY1="))
keyLineEdit1->setText(line.mid(5, line.length()));
if(line.contains("KEY2="))
keyLineEdit2->setText(line.mid(5, line.length()));
if(line.contains("KEY3="))
keyLineEdit3->setText(line.mid(5, line.length()));
if(line.contains("KEY=")){
wepEnabled->setChecked(true);
QString key;
if(line.right(5) == (" open")){
key = line.mid(4, line.length()-5);
authOpen->setChecked(true);
authShared->setChecked(false);
}
else{
authOpen->setChecked(false);
authShared->setChecked(true);
key = line.mid(4, line.length());
}
@@ -202,42 +205,42 @@ void WLANImp::changeAndSaveSettingFile(){
/**
* Check to see if the current config is valid
* Save wireless.opts, save interfaces
*/
void WLANImp::accept(){
if(wepEnabled->isChecked()){
if(keyLineEdit0->text().isEmpty() && keyLineEdit1->text().isEmpty() && keyLineEdit2->text().isEmpty() && keyLineEdit3->text().isEmpty() )
{
QMessageBox::information(this, "Error", "Please enter a key for WEP.", QMessageBox::Ok);
return;
}
}
if(essSpecificLineEdit->text().isEmpty()){
QMessageBox::information(this, "Error", "Please enter a ESS-ID.", QMessageBox::Ok);
return;
}
// Ok settings are good here, save
changeAndSaveSettingFile();
// Try to save the interfaces settings.
if(!interfaceSetup->saveChanges())
return;
-
+
// Restart the device now that the settings have changed
QString initpath;
if( QDir("/etc/rc.d/init.d").exists() )
initpath = "/etc/rc.d/init.d";
else if( QDir("/etc/init.d").exists() )
initpath = "/etc/init.d";
if( initpath )
system(QString("%1/pcmcia stop").arg(initpath));
if( initpath )
system(QString("%1/pcmcia start").arg(initpath));
// Close out the dialog
QDialog::accept();
}
// wlanimp.cpp
diff --git a/noncore/settings/networksettings/wlan/wlanimp.cpp b/noncore/settings/networksettings/wlan/wlanimp.cpp
index 120d4e5..84e0bae 100644
--- a/noncore/settings/networksettings/wlan/wlanimp.cpp
+++ b/noncore/settings/networksettings/wlan/wlanimp.cpp
@@ -21,99 +21,102 @@
/**
* Constructor, read in the wireless.opts file for parsing later.
*/
WLANImp::WLANImp( QWidget* parent, const char* name, Interface *i, bool modal, WFlags fl):WLAN(parent, name, modal, fl), currentProfile("*") {
interfaceSetup = new InterfaceSetupImp(tabWidget, "InterfaceSetupImp", i);
tabWidget->insertTab(interfaceSetup, "TCP/IP");
// Read in the config file.
QString wlanFile = WIRELESS_OPTS;
QFile file(wlanFile);
if (file.open(IO_ReadOnly)){
QTextStream stream( &file );
QString line = "";
while ( !stream.eof() ) {
line += stream.readLine();
line += "\n";
}
file.close();
settingsFileText = QStringList::split("\n", line, true);
parseSettingFile();
}
else
qDebug(QString("WLANImp: Can't open file: %1 for reading.").arg(wlanFile).latin1());
connect(networkType, SIGNAL(activated(int)), this, SLOT(typeChanged(int)));
-
}
void WLANImp::typeChanged(int mod){
networkChannel->setEnabled(mod);
channelLabel->setEnabled(mod);
}
/**
* Change the profile for both wireless settings and network settings.
*/
void WLANImp::setProfile(const QString &profile){
interfaceSetup->setProfile(profile);
parseSettingFile();
}
/**
* Parses the settings file that was read in and gets any setting from it.
*/
void WLANImp::parseSettingFile(){
bool foundCase = false;
bool found = false;
for ( QStringList::Iterator it = settingsFileText.begin(); it != settingsFileText.end(); ++it ) {
QString line = (*it).simplifyWhiteSpace();
if(line.contains("case"))
foundCase = true;
// See if we found our scheme to write or the sceme couldn't be found
if((foundCase && line.contains("esac")) ||
(foundCase && line.left(currentProfile.length()+7) == currentProfile + ",*,*,*)" && line.at(0) != '#'))
found = true;
if(line.contains(";;"))
found = false;
if(found){
// write out scheme
if(line.contains("ESSID=")){
QString id = line.mid(line.find("ESSID=")+6, line.length());
if(id == "any"){
essAny->setChecked(false);
}else{
essAny->setChecked(true);
essSpecificLineEdit->setText(id);
}
}
if(line.contains("MODE=")){
QString mode = line.mid(line.find("MODE=")+5, line.length());
if(mode == "Managed"){
networkType->setCurrentItem(0);
+ channelLabel->setEnabled(false);
+ networkChannel->setEnabled(false);
}
else{
- networkType->setCurrentItem(0);
+ networkType->setCurrentItem(1);
+ networkChannel->setEnabled(true);
+ channelLabel->setEnabled(true);
}
}
if(line.contains("KEY0="))
keyLineEdit0->setText(line.mid(5, line.length()));
if(line.contains("KEY1="))
keyLineEdit1->setText(line.mid(5, line.length()));
if(line.contains("KEY2="))
keyLineEdit2->setText(line.mid(5, line.length()));
if(line.contains("KEY3="))
keyLineEdit3->setText(line.mid(5, line.length()));
if(line.contains("KEY=")){
wepEnabled->setChecked(true);
QString key;
if(line.right(5) == (" open")){
key = line.mid(4, line.length()-5);
authOpen->setChecked(true);
authShared->setChecked(false);
}
else{
authOpen->setChecked(false);
authShared->setChecked(true);
key = line.mid(4, line.length());
}
@@ -202,42 +205,42 @@ void WLANImp::changeAndSaveSettingFile(){
/**
* Check to see if the current config is valid
* Save wireless.opts, save interfaces
*/
void WLANImp::accept(){
if(wepEnabled->isChecked()){
if(keyLineEdit0->text().isEmpty() && keyLineEdit1->text().isEmpty() && keyLineEdit2->text().isEmpty() && keyLineEdit3->text().isEmpty() )
{
QMessageBox::information(this, "Error", "Please enter a key for WEP.", QMessageBox::Ok);
return;
}
}
if(essSpecificLineEdit->text().isEmpty()){
QMessageBox::information(this, "Error", "Please enter a ESS-ID.", QMessageBox::Ok);
return;
}
// Ok settings are good here, save
changeAndSaveSettingFile();
// Try to save the interfaces settings.
if(!interfaceSetup->saveChanges())
return;
-
+
// Restart the device now that the settings have changed
QString initpath;
if( QDir("/etc/rc.d/init.d").exists() )
initpath = "/etc/rc.d/init.d";
else if( QDir("/etc/init.d").exists() )
initpath = "/etc/init.d";
if( initpath )
system(QString("%1/pcmcia stop").arg(initpath));
if( initpath )
system(QString("%1/pcmcia start").arg(initpath));
// Close out the dialog
QDialog::accept();
}
// wlanimp.cpp