summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--libopie/odevice.cpp2
1 files changed, 1 insertions, 1 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 62e3569..7d862cd 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -923,520 +923,520 @@ bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, b
( d-> m_model == Model_iPAQ_H39xx )) {
newkeycode = HardKey_Mail;
}
break;
}
// Rotate cursor keys 180°
case Key_Left :
case Key_Right:
case Key_Up :
case Key_Down : {
if (( d-> m_model == Model_iPAQ_H31xx ) ||
( d-> m_model == Model_iPAQ_H38xx )) {
newkeycode = Key_Left + ( keycode - Key_Left + 2 ) % 4;
}
break;
}
// map Power Button short/long press to F34/F35
case Key_SysReq: {
if ( isPress ) {
if ( m_power_timer )
killTimer ( m_power_timer );
m_power_timer = startTimer ( 500 );
}
else if ( m_power_timer ) {
killTimer ( m_power_timer );
m_power_timer = 0;
QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, true, false );
QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, false, false );
}
newkeycode = Key_unknown;
break;
}
}
if ( newkeycode != keycode ) {
if ( newkeycode != Key_unknown )
QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat );
return true;
}
else
return false;
}
void iPAQ::timerEvent ( QTimerEvent * )
{
killTimer ( m_power_timer );
m_power_timer = 0;
QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
}
void iPAQ::alarmSound ( )
{
#ifndef QT_NO_SOUND
static Sound snd ( "alarm" );
int fd;
int vol;
bool vol_reset = false;
if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
Config cfg ( "qpe" );
cfg. setGroup ( "Volume" );
int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
if ( volalarm < 0 )
volalarm = 0;
else if ( volalarm > 100 )
volalarm = 100;
volalarm |= ( volalarm << 8 );
if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
vol_reset = true;
}
}
snd. play ( );
while ( !snd. isFinished ( ))
qApp-> processEvents ( );
if ( fd >= 0 ) {
if ( vol_reset )
::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
::close ( fd );
}
#endif
}
bool iPAQ::setSoftSuspend ( bool soft )
{
bool res = false;
int fd;
if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
res = true;
else
::perror ( "write to /proc/sys/ts/suspend_button_mode" );
::close ( fd );
}
else
::perror ( "/proc/sys/ts/suspend_button_mode" );
return res;
}
bool iPAQ::setDisplayBrightness ( int bright )
{
bool res = false;
int fd;
if ( bright > 255 )
bright = 255;
if ( bright < 0 )
bright = 0;
if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
FLITE_IN bl;
bl. mode = 1;
bl. pwr = bright ? 1 : 0;
bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
::close ( fd );
}
return res;
}
int iPAQ::displayBrightnessResolution ( ) const
{
switch ( model ( )) {
case Model_iPAQ_H31xx:
case Model_iPAQ_H36xx:
case Model_iPAQ_H37xx:
return 128; // really 256, but >128 could damage the LCD
case Model_iPAQ_H38xx:
case Model_iPAQ_H39xx:
return 64;
default:
return 2;
}
}
bool iPAQ::hasLightSensor ( ) const
{
return true;
}
int iPAQ::readLightSensor ( )
{
int fd;
int val = -1;
if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) {
char buffer [8];
if ( ::read ( fd, buffer, 5 ) == 5 ) {
char *endptr;
buffer [4] = 0;
val = ::strtol ( buffer + 2, &endptr, 16 );
if ( *endptr != 0 )
val = -1;
}
::close ( fd );
}
return val;
}
int iPAQ::lightSensorResolution ( ) const
{
return 256;
}
/**************************************************
*
* Zaurus
*
**************************************************/
void Zaurus::init ( )
{
d-> m_vendorstr = "Sharp";
d-> m_vendor = Vendor_Sharp;
QFile f ( "/proc/filesystems" );
QString model;
if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
d-> m_vendorstr = "OpenZaurus Team";
d-> m_systemstr = "OpenZaurus";
d-> m_system = System_OpenZaurus;
f. close ( );
f. setName ( "/etc/oz_version" );
if ( f. open ( IO_ReadOnly )) {
QTextStream ts ( &f );
d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
f. close ( );
}
}
else {
d-> m_systemstr = "Zaurus";
d-> m_system = System_Zaurus;
}
f. setName ( "/proc/cpuinfo" );
if ( f. open ( IO_ReadOnly ) ) {
QTextStream ts ( &f );
QString line;
while( line = ts. readLine ( ) ) {
if ( line. left ( 8 ) == "Hardware" )
break;
}
int loc = line. find ( ":" );
if ( loc != -1 )
model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
}
if ( model == "SHARP Corgi" ) {
d-> m_model = Model_Zaurus_SLC700;
d-> m_modelstr = "Zaurus SL-C700";
} else if ( model == "SHARP Poodle" ) {
d-> m_model = Model_Zaurus_SLB600;
d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
} else if ( model = "Sharp-Collie" ) {
d-> m_model = Model_Zaurus_SL5500;
d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
} else {
d-> m_model = Model_Zaurus_SL5500;
d-> m_modelstr = "Zaurus (Model unknown)";
}
bool flipstate = false;
switch ( d-> m_model ) {
case Model_Zaurus_SLA300:
d-> m_rotation = Rot0;
break;
case Model_Zaurus_SLC700:
// Note: need to 1) set flipstate based on physical screen orientation
// and 2) check to see if the user overrode the rotation direction
// using appearance, and if so, remove that item from the Config to
// ensure the rotate applet flips us back to the previous state.
if ( flipstate ) {
// 480x640
d-> m_rotation = Rot0;
d-> m_direction = CW;
} else {
// 640x480
d-> m_rotation = Rot270;
d-> m_direction = CCW;
}
break;
case Model_Zaurus_SLB600:
case Model_Zaurus_SL5500:
case Model_Zaurus_SL5000:
default:
d-> m_rotation = Rot270;
break;
}
m_leds [0] = Led_Off;
}
void Zaurus::initButtons ( )
{
if ( d-> m_buttons )
return;
d-> m_buttons = new QValueList <ODeviceButton>;
struct z_button * pz_buttons;
int buttoncount;
switch ( d-> m_model ) {
case Model_Zaurus_SLC700:
pz_buttons = z_buttons_c700;
buttoncount = ARRAY_SIZE(z_buttons_c700);
break;
default:
pz_buttons = z_buttons;
buttoncount = ARRAY_SIZE(z_buttons);
break;
}
for ( int i = 0; i < buttoncount; i++ ) {
struct z_button *zb = pz_buttons + i;
ODeviceButton b;
b. setKeycode ( zb-> code );
b. setUserText ( QObject::tr ( "Button", zb-> utext ));
b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
d-> m_buttons-> append ( b );
}
reloadButtonMapping ( );
QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
}
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
//#include <asm/sharp_char.h> // including kernel headers is evil ...
#define SHARP_DEV_IOCTL_COMMAND_START 0x5680
#define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
#define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START)
#define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */
#define SHARP_BUZ_KEYSOUND 2 /* key sound */
#define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */
/* --- for SHARP_BUZZER device --- */
//#define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
//#define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START)
#define SHARP_BUZZER_SETVOLUME (SHARP_BUZZER_IOCTL_START+1)
#define SHARP_BUZZER_GETVOLUME (SHARP_BUZZER_IOCTL_START+2)
#define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
#define SHARP_BUZZER_SETMUTE (SHARP_BUZZER_IOCTL_START+4)
#define SHARP_BUZZER_STOPSOUND (SHARP_BUZZER_IOCTL_START+5)
//#define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */
//#define SHARP_BUZ_KEYSOUND 2 /* key sound */
//#define SHARP_PDA_ILLCLICKSOUND 3 /* illegal click */
//#define SHARP_PDA_WARNSOUND 4 /* warning occurred */
//#define SHARP_PDA_ERRORSOUND 5 /* error occurred */
//#define SHARP_PDA_CRITICALSOUND 6 /* critical error occurred */
//#define SHARP_PDA_SYSSTARTSOUND 7 /* system start */
//#define SHARP_PDA_SYSTEMENDSOUND 8 /* system shutdown */
//#define SHARP_PDA_APPSTART 9 /* application start */
//#define SHARP_PDA_APPQUIT 10 /* application ends */
//#define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */
//#define SHARP_BUZ_DAILY_ALARM 12 /* daily alarm */
//#define SHARP_BUZ_GOT_PHONE_CALL 13 /* phone call sound */
//#define SHARP_BUZ_GOT_MAIL 14 /* mail sound */
//
#define SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
#define SHARP_LED_SETSTATUS (SHARP_LED_IOCTL_START+1)
typedef struct sharp_led_status {
int which; /* select which LED status is wanted. */
int status; /* set new led status if you call SHARP_LED_SETSTATUS */
} sharp_led_status;
#define SHARP_LED_MAIL_EXISTS 9 /* mail status (exists or not) */
#define LED_MAIL_NO_UNREAD_MAIL 0 /* for SHARP_LED_MAIL_EXISTS */
#define LED_MAIL_NEWMAIL_EXISTS 1 /* for SHARP_LED_MAIL_EXISTS */
#define LED_MAIL_UNREAD_MAIL_EX 2 /* for SHARP_LED_MAIL_EXISTS */
// #include <asm/sharp_apm.h> // including kernel headers is evil ...
#define APM_IOCGEVTSRC OD_IOR( 'A', 203, int )
#define APM_IOCSEVTSRC OD_IORW( 'A', 204, int )
#define APM_EVT_POWER_BUTTON (1 << 0)
#define FL_IOCTL_STEP_CONTRAST 100
void Zaurus::buzzer ( int sound )
{
- static int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK );
+ int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK );
if ( fd >= 0 ) {
::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
::close ( fd );
}
}
void Zaurus::alarmSound ( )
{
buzzer ( SHARP_BUZ_SCHEDULE_ALARM );
}
void Zaurus::touchSound ( )
{
buzzer ( SHARP_BUZ_TOUCHSOUND );
}
void Zaurus::keySound ( )
{
buzzer ( SHARP_BUZ_KEYSOUND );
}
QValueList <OLed> Zaurus::ledList ( ) const
{
QValueList <OLed> vl;
vl << Led_Mail;
return vl;
}
QValueList <OLedState> Zaurus::ledStateList ( OLed l ) const
{
QValueList <OLedState> vl;
if ( l == Led_Mail )
vl << Led_Off << Led_On << Led_BlinkSlow;
return vl;
}
OLedState Zaurus::ledState ( OLed which ) const
{
if ( which == Led_Mail )
return m_leds [0];
else
return Led_Off;
}
bool Zaurus::setLedState ( OLed which, OLedState st )
{
static int fd = ::open ( "/dev/sharp_led", O_RDWR|O_NONBLOCK );
if ( which == Led_Mail ) {
if ( fd >= 0 ) {
struct sharp_led_status leds;
::memset ( &leds, 0, sizeof( leds ));
leds. which = SHARP_LED_MAIL_EXISTS;
bool ok = true;
switch ( st ) {
case Led_Off : leds. status = LED_MAIL_NO_UNREAD_MAIL; break;
case Led_On : leds. status = LED_MAIL_NEWMAIL_EXISTS; break;
case Led_BlinkSlow: leds. status = LED_MAIL_UNREAD_MAIL_EX; break;
default : ok = false;
}
if ( ok && ( ::ioctl ( fd, SHARP_LED_SETSTATUS, &leds ) >= 0 )) {
m_leds [0] = st;
return true;
}
}
}
return false;
}
bool Zaurus::setSoftSuspend ( bool soft )
{
bool res = false;
int fd;
if ((( fd = ::open ( "/dev/apm_bios", O_RDWR )) >= 0 ) ||
(( fd = ::open ( "/dev/misc/apm_bios",O_RDWR )) >= 0 )) {
int sources = ::ioctl ( fd, APM_IOCGEVTSRC, 0 ); // get current event sources
if ( sources >= 0 ) {
if ( soft )
sources &= ~APM_EVT_POWER_BUTTON;
else
sources |= APM_EVT_POWER_BUTTON;
if ( ::ioctl ( fd, APM_IOCSEVTSRC, sources ) >= 0 ) // set new event sources
res = true;
else
perror ( "APM_IOCGEVTSRC" );
}
else
perror ( "APM_IOCGEVTSRC" );
::close ( fd );
}
else
perror ( "/dev/apm_bios or /dev/misc/apm_bios" );
return res;
}
bool Zaurus::setDisplayBrightness ( int bright )
{
bool res = false;
int fd;
if ( bright > 255 )
bright = 255;
if ( bright < 0 )
bright = 0;
if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
if ( bright && !bl )
bl = 1;
res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
::close ( fd );
}
return res;
}
int Zaurus::displayBrightnessResolution ( ) const
{
return 5;
}