| -rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.cpp | 39 |
1 files changed, 37 insertions, 2 deletions
diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp index 8369f54..7302d2c 100644 --- a/libopie2/opiecore/device/odevice_zaurus.cpp +++ b/libopie2/opiecore/device/odevice_zaurus.cpp @@ -69,96 +69,127 @@ struct z_button z_buttons [] = { "addressbook", "beamBusinessCard()" }, { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"), "devicebuttons/z_home", "QPE/Launcher", "home()", "buttonsettings", "raise()" }, { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"), "devicebuttons/z_menu", "QPE/TaskBar", "toggleMenu()", "QPE/TaskBar", "toggleStartMenu()" }, { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"), "devicebuttons/z_mail", "opiemail", "raise()", "opiemail", "newMail()" }, }; struct z_button z_buttons_c700 [] = { { Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"), "devicebuttons/z_calendar", "datebook", "nextView()", "today", "raise()" }, { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"), "devicebuttons/z_contact", "addressbook", "raise()", "addressbook", "beamBusinessCard()" }, { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"), "devicebuttons/z_home", "QPE/Launcher", "home()", "buttonsettings", "raise()" }, { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"), "devicebuttons/z_menu", "QPE/TaskBar", "toggleMenu()", "QPE/TaskBar", "toggleStartMenu()" }, { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"), "devicebuttons/z_mail", "opiemail", "raise()", "opiemail", "newMail()" }, { Qt::Key_F15, QT_TRANSLATE_NOOP("Button", "Hinge1"), "devicebuttons/z_hinge1", "QPE/Rotation", "rotateDefault()",0}, { Qt::Key_F16, QT_TRANSLATE_NOOP("Button", "Hinge2"), "devicebuttons/z_hinge2", "QPE/Rotation", "rotateDefault()",0}, { Qt::Key_F17, QT_TRANSLATE_NOOP("Button", "Hinge3"), "devicebuttons/z_hinge3", "QPE/Rotation", "rotateDefault()",0}, }; +struct z_button z_buttons_6000 [] = { + { Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"), + "devicebuttons/z_calendar", + "datebook", "nextView()", + "today", "raise()" }, + { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"), + "devicebuttons/z_contact", + "addressbook", "raise()", + "addressbook", "beamBusinessCard()" }, + { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"), + "devicebuttons/z_home", + "QPE/Launcher", "home()", + "buttonsettings", "raise()" }, + { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"), + "devicebuttons/z_menu", + "QPE/TaskBar", "toggleMenu()", + "QPE/TaskBar", "toggleStartMenu()" }, + { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"), + "devicebuttons/z_mail", + "opiemail", "raise()", + "opiemail", "newMail()" }, + { Qt::Key_F15, QT_TRANSLATE_NOOP("Button", "Rotate Button"), + "devicebuttons/z_rotate", + 0, + "QPE/Rotation", "rotateDefault()" }, + { Qt::Key_F24, QT_TRANSLATE_NOOP("Button", "Record Button"), + "devicebuttons/z_hinge3", + "QPE/VMemo", "toggleRecord()", + "sound", "raise()" }, +}; + // FIXME This gets unnecessary complicated. We should think about splitting the Zaurus // class up into individual classes. We would need three classes // // Zaurus-Collie (SA-model w/ 320x240 lcd, for SL5500 and SL5000) // Zaurus-Poodle (PXA-model w/ 320x240 lcd, for SL5600) // Zaurus-Corgi (PXA-model w/ 640x480 lcd, for C700, C750, C760, C860, C3000, C1000, C3100) // Zaurus-Tosa (PXA-model w/ 480x640 lcd, for SL6000) void Zaurus::init(const QString& cpu_info) { // Set the time to wait until the system is really suspended // the delta between apm --suspend and sleeping setAPMTimeOut( 15000 ); // generic distribution code already scanned /etc/issue at that point - // embedix releases contain "Embedix <version> | Linux for Embedded Devices" if ( d->m_sysverstr.contains( "embedix", false ) ) { d->m_vendorstr = "Sharp"; d->m_vendor = Vendor_Sharp; d->m_systemstr = "Zaurus"; d->m_system = System_Zaurus; m_embedix = true; } else { d->m_vendorstr = "OpenZaurus Team"; d->m_systemstr = "OpenZaurus"; d->m_system = System_OpenZaurus; // sysver already gathered // OpenZaurus sometimes uses the 2.4 (embedix) kernel, check if this is one FILE *uname = popen("uname -r", "r"); QFile f; QString line; if ( f.open(IO_ReadOnly, uname) ) { QTextStream ts ( &f ); line = ts.readLine(); m_embedix = line.startsWith( "2.4." ); f.close(); } pclose(uname); } // check the Zaurus model QString model; int loc = cpu_info.find( ":" ); if ( loc != -1 ) @@ -210,102 +241,106 @@ void Zaurus::init(const QString& cpu_info) break; default: m_backlightdev = "/sys/class/backlight/corgi-bl/"; } // set initial rotation switch( d->m_model ) { case Model_Zaurus_SL6000: // fallthrough case Model_Zaurus_SLA300: d->m_rotation = Rot0; break; case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: // fallthrough case Model_Zaurus_SLC7x0: d->m_rotation = rotation(); d->m_direction = direction(); break; case Model_Zaurus_SLB600: // fallthrough case Model_Zaurus_SL5000: // fallthrough case Model_Zaurus_SL5500: // fallthrough default: d->m_rotation = Rot270; } // set default qte driver switch( d->m_model ) { case Model_Zaurus_SLC7x0: d->m_qteDriver = "W100"; break; default: d->m_qteDriver = "Transformed"; } m_leds[0] = Led_Off; if ( m_embedix ) qDebug( "Zaurus::init() - Using the 2.4 Embedix HAL on a %s", (const char*) d->m_modelstr ); else qDebug( "Zaurus::init() - Using the 2.6 OpenZaurus HAL on a %s", (const char*) d->m_modelstr ); } void Zaurus::initButtons() { if ( d->m_buttons ) return; - d->m_buttons = new QValueList <ODeviceButton>; struct z_button * pz_buttons; int buttoncount; - switch ( d->m_model ) { + switch ( d->m_model ) + { + case Model_Zaurus_SL6000: + pz_buttons = z_buttons_6000; + buttoncount = ARRAY_SIZE(z_buttons_6000); + break; case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: // fallthrough case Model_Zaurus_SLC7x0: if ( isQWS( ) ) { addPreHandler(this); // hinge-sensor-handler } pz_buttons = z_buttons_c700; buttoncount = ARRAY_SIZE(z_buttons_c700); break; default: pz_buttons = z_buttons; buttoncount = ARRAY_SIZE(z_buttons); break; } for ( int i = 0; i < buttoncount; i++ ) { struct z_button *zb = pz_buttons + i; ODeviceButton b; b.setKeycode( zb->code ); b.setUserText( QObject::tr( "Button", zb->utext )); b.setPixmap( OResource::loadPixmap( zb->pix )); b.setFactoryPresetPressedAction( OQCopMessage( makeChannel ( zb->fpressedservice ), zb->fpressedaction )); b.setFactoryPresetHeldAction( OQCopMessage( makeChannel ( zb->fheldservice ), zb->fheldaction )); d->m_buttons->append( b ); } reloadButtonMapping(); } typedef struct sharp_led_status { int which; /* select which LED status is wanted. */ int status; /* set new led status if you call SHARP_LED_SETSTATUS */ } sharp_led_status; void Zaurus::buzzer( int sound ) { #ifndef QT_NO_SOUND Sound *snd = 0; // All devices except SL5500 have a DSP device if ( d->m_model != Model_Zaurus_SL5000 && d->m_model != Model_Zaurus_SL5500 ) { switch ( sound ){ case SHARP_BUZ_TOUCHSOUND: { |