summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--noncore/apps/opie-console/io_serial.cpp3
-rw-r--r--noncore/apps/opie-console/mainwindow.cpp7
2 files changed, 7 insertions, 3 deletions
diff --git a/noncore/apps/opie-console/io_serial.cpp b/noncore/apps/opie-console/io_serial.cpp
index b495f39..77ced85 100644
--- a/noncore/apps/opie-console/io_serial.cpp
+++ b/noncore/apps/opie-console/io_serial.cpp
@@ -1,55 +1,57 @@
#include <fcntl.h>
#include <termios.h>
#include <errno.h>
#include <unistd.h>
#include "io_serial.h"
IOSerial::IOSerial(const Profile &config) : IOLayer(config) {
+ m_read = 0l;
+ m_error = 0l;
m_fd = 0;
reload(config);
}
IOSerial::~IOSerial() {
if (m_fd) {
close();
}
}
void IOSerial::send(const QByteArray &data) {
if (m_fd) {
write(m_fd, data.data(), data.size());
} else {
emit error(Refuse, tr("Not connected"));
}
}
void IOSerial::close() {
if (m_fd) {
delete m_read;
delete m_error;
::close(m_fd);
m_fd = 0;
} else {
emit error(Refuse, tr("Not connected"));
}
}
bool IOSerial::open() {
if (!m_fd) {
struct termios tty;
m_fd = ::open(m_device, O_RDWR | O_NOCTTY | O_NONBLOCK);
if (m_fd < 0) {
emit error(CouldNotOpen, strerror(errno));
return FALSE;
}
tcgetattr(m_fd, &tty);
/* Baud rate */
int speed = baud(m_baud);
if (speed == -1) {
emit error(Refuse, tr("Invalid baud rate"));
}
cfsetospeed(&tty, speed);
cfsetispeed(&tty, speed);
@@ -67,96 +69,97 @@ bool IOSerial::open() {
default: break;
}
/* Raw, no echo mode */
tty.c_iflag = IGNBRK;
tty.c_lflag = 0;
tty.c_oflag = 0;
tty.c_cflag |= CLOCAL | CREAD;
/* Stop bits */
if (m_sbits == 2) {
tty.c_cflag |= CSTOPB;
} else {
tty.c_cflag &= ~CSTOPB;
}
tty.c_cc[VMIN] = 1;
tty.c_cc[VTIME] = 5;
/* Flow control */
if (m_flow & FlowSW)
tty.c_iflag |= IXON | IXOFF;
else
tty.c_iflag &= ~(IXON|IXOFF|IXANY);
if (m_flow & FlowHW)
tty.c_cflag |= CRTSCTS;
else
tty.c_cflag &= ~CRTSCTS;
/* Parity */
tty.c_cflag &= ~(PARENB | PARODD);
if (m_parity & ParityEven)
tty.c_cflag |= PARENB;
else if (m_parity & ParityOdd)
tty.c_cflag |= (PARENB | PARODD);
/* Set the changes */
tcsetattr(m_fd, TCSANOW, &tty);
/* Notifications on read & errors */
m_read = new QSocketNotifier(m_fd, QSocketNotifier::Read, this);
m_error = new QSocketNotifier(m_fd, QSocketNotifier::Exception, this);
connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
return TRUE;
} else {
emit error(Refuse, tr("Device is already connected"));
+ m_fd = 0;
return FALSE;
}
}
void IOSerial::reload(const Profile &config) {
m_device = config.readEntry("Device", SERIAL_DEFAULT_DEVICE);
m_baud = config.readNumEntry("Baud", SERIAL_DEFAULT_BAUD);
m_parity = config.readNumEntry("Parity", SERIAL_DEFAULT_PARITY);
m_dbits = config.readNumEntry("DataBits", SERIAL_DEFAULT_DBITS);
m_sbits = config.readNumEntry("StopBits", SERIAL_DEFAULT_SBITS);
m_flow = config.readNumEntry("Flow", SERIAL_DEFAULT_FLOW);
}
int IOSerial::baud(int baud) const {
switch (baud) {
case 300: return B300; break;
case 600: return B600; break;
case 1200: return B1200; break;
case 2400: return B2400; break;
case 4800: return B4800; break;
case 9600: return B9600; break;
case 19200: return B19200; break;
case 38400: return B38400; break;
case 57600: return B57600; break;
case 115200: return B115200; break;
}
return -1;
}
void IOSerial::errorOccured() {
emit error(ClosedUnexpected, strerror(errno));
close();
}
void IOSerial::dataArrived() {
QByteArray array;
char buf[4096];
int len = read(m_fd, buf, 4096);
if (len == 0)
close();
if (len < 0)
return;
array.setRawData(buf, len);
emit received(array);
}
QString IOSerial::identifier() const {
diff --git a/noncore/apps/opie-console/mainwindow.cpp b/noncore/apps/opie-console/mainwindow.cpp
index aeb3742..0bd6a13 100644
--- a/noncore/apps/opie-console/mainwindow.cpp
+++ b/noncore/apps/opie-console/mainwindow.cpp
@@ -24,97 +24,97 @@ MainWindow::MainWindow() {
initUI();
populateProfiles();
}
void MainWindow::initUI() {
setToolBarsMovable( FALSE );
m_tool = new QToolBar( this );
m_tool->setHorizontalStretchable( TRUE );
m_bar = new QMenuBar( m_tool );
m_console = new QPopupMenu( this );
m_sessionsPop= new QPopupMenu( this );
m_settings = new QPopupMenu( this );
/*
* new Action for new sessions
*/
QAction* a = new QAction();
a->setText( tr("New Connection") );
a->addTo( m_console );
connect(a, SIGNAL(activated() ),
this, SLOT(slotNew() ) );
/*
* connect action
*/
m_connect = new QAction();
m_connect->setText( tr("Connect") );
m_connect->addTo( m_console );
connect(m_connect, SIGNAL(activated() ),
this, SLOT(slotConnect() ) );
/*
* disconnect action
*/
m_disconnect = new QAction();
m_disconnect->setText( tr("Disconnect") );
m_disconnect->addTo( m_console );
connect(m_disconnect, SIGNAL(activated() ),
this, SLOT(slotDisconnect() ) );
/*
* terminate action
*/
m_terminate = new QAction();
m_terminate->setText( tr("Terminate") );
m_terminate->addTo( m_console );
- connect(m_disconnect, SIGNAL(activated() ),
+ connect(m_terminate, SIGNAL(activated() ),
this, SLOT(slotTerminate() ) );
a = new QAction();
a->setText( tr("Close Window") );
a->addTo( m_console );
connect(a, SIGNAL(activated() ),
this, SLOT(slotClose() ) );
/*
* the settings action
*/
m_setProfiles = new QAction();
m_setProfiles->setText( tr("Configure Profiles") );
m_setProfiles->addTo( m_settings );
connect( m_setProfiles, SIGNAL(activated() ),
this, SLOT(slotConfigure() ) );
/* insert the submenu */
m_console->insertItem(tr("New from Profile"), m_sessionsPop,
-1, 0);
/* insert the connection menu */
m_bar->insertItem( tr("Connection"), m_console );
/* the settings menu */
m_bar->insertItem( tr("Settings"), m_settings );
/*
* connect to the menu activation
*/
connect( m_sessionsPop, SIGNAL(activated( int ) ),
this, SLOT(slotProfile( int ) ) );
m_consoleWindow = new TabWidget( this, "blah");
setCentralWidget( m_consoleWindow );
}
ProfileManager* MainWindow::manager() {
return m_manager;
}
TabWidget* MainWindow::tabWidget() {
return m_consoleWindow;
}
void MainWindow::populateProfiles() {
m_sessionsPop->clear();
Profile::ValueList list = manager()->all();
for (Profile::ValueList::Iterator it = list.begin(); it != list.end(); ++it ) {
@@ -143,74 +143,75 @@ void MainWindow::slotNew() {
qWarning("New Connection");
ProfileEditorDialog dlg(factory() );
int ret = dlg.exec();
if ( ret == QDialog::Accepted ) {
create( dlg.profile() );
}
}
void MainWindow::slotConnect() {
if ( currentSession() )
currentSession()->layer()->open();
}
void MainWindow::slotDisconnect() {
if ( currentSession() )
currentSession()->layer()->close();
}
void MainWindow::slotTerminate() {
if ( currentSession() )
currentSession()->layer()->close();
slotClose();
/* FIXME move to the next session */
}
void MainWindow::slotConfigure() {
qWarning("configure");
ConfigDialog conf( manager()->all(), factory() );
conf.showMaximized();
int ret = conf.exec();
if ( QDialog::Accepted == ret ) {
qWarning("conf %d", conf.list().count() );
manager()->setProfiles( conf.list() );
populateProfiles();
}
}
/*
* we will remove
* this window from the tabwidget
* remove it from the list
* delete it
* and set the currentSession()
*/
void MainWindow::slotClose() {
+ qWarning("close");
if (!currentSession() )
return;
tabWidget()->remove( currentSession() );
- tabWidget()->setCurrent( m_sessions.first() );
+ /*it's autodelete */
m_sessions.remove( m_curSession );
- delete m_curSession;
m_curSession = m_sessions.first();
+ tabWidget()->setCurrent( m_curSession );
}
/*
* We will get the name
* Then the profile
* and then we will make a profile
*/
void MainWindow::slotProfile( int id) {
Profile prof = manager()->profile( m_sessionsPop->text( id) );
create( prof );
}
void MainWindow::create( const Profile& prof ) {
Session *ses = manager()->fromProfile( prof, tabWidget() );
m_sessions.append( ses );
tabWidget()->add( ses );
m_curSession = ses;
}