5 files changed, 151 insertions, 13 deletions

diff --git a/noncore/securityplugins/blueping/bluepingConfigWidget.cpp b/noncore/securityplugins/blueping/bluepingConfigWidget.cpp
new file mode 100644
index 0000000..876ccda
--- a/dev/null
+++ b/noncore/securityplugins/blueping/bluepingConfigWidget.cpp
@@ -0,0 +1,74 @@
+#include "bluepingConfigWidget.h"
+
+#include <qwidget.h>
+#include <qlayout.h>
+#include <qlabel.h>
+#include <qgroupbox.h>
+#include <qmessagebox.h>
+#include <qregexp.h>
+
+using Opie::Security::MultiauthConfigWidget;
+
+BluepingConfigWidget::BluepingConfigWidget(QWidget* parent = 0, const char* name = "Blueping configuration widget")
+: MultiauthConfigWidget(parent, name)
+{
+    m_config = new Config("Security");
+    m_config->setGroup("BluepingPlugin");
+    QVBoxLayout * baseLayout = new QVBoxLayout( this);
+    baseLayout->setSpacing(11);
+    baseLayout->setMargin(11);
+    baseLayout->setAlignment( Qt::AlignTop );
+
+    QGroupBox * configBox = new QGroupBox(0, Qt::Vertical, tr("Set the MAC address to ping here"), this);
+    baseLayout->addWidget(configBox);
+    QVBoxLayout *boxLayout = new QVBoxLayout( configBox->layout() );
+
+    QHBoxLayout * configLayout = new QHBoxLayout();
+    configLayout->setSpacing(6);
+    boxLayout->addLayout(configLayout);
+
+    QString mac = m_config->readEntry("mac");
+    if ( mac.isEmpty() )
+        mac = "00:00:00:00:00:00";
+
+    editMAC = new QLineEdit( mac, configBox, "editMAC" );
+    setMAC = new QPushButton( tr("Set"), configBox, "setMAC" );
+    configLayout->addWidget(editMAC);
+    configLayout->addWidget(setMAC);
+
+    QLabel * description = new QLabel( "<p>" + tr("Detecting another Bluetooth device by its MAC address provides a minimal and automatic level of protection.") + "</p><p><em>"
+                                       + tr("Note: if you don't put a valid MAC here but you activate the plugin, it will always succeed!") + "</em></p>", configBox );
+    boxLayout->addWidget(description);
+
+
+    connect(setMAC, SIGNAL( clicked() ), this, SLOT( changeMAC() ));
+
+}
+
+/// checks and writes the MAC in the config file, if its format is OK
+void BluepingConfigWidget::changeMAC() {
+    QString mac = editMAC->text();
+    QRegExp macPattern("[0-9A-Fa-f][0-9A-Fa-f]:[0-9A-Fa-f][0-9A-Fa-f]:[0-9A-Fa-f][0-9A-Fa-f]:[0-9A-Fa-f][0-9A-Fa-f]:[0-9A-Fa-f][0-9A-Fa-f]:[0-9A-Fa-f][0-9A-Fa-f]");
+    if ( (mac.length() == 17) && (macPattern.match(mac) == 0) )
+    {
+        m_config->writeEntry("mac", mac);
+        QMessageBox success( tr("MAC address saved!"), "<p>" + tr("Make sure that Bluetooth is turned on on the corresponding device when the Blueping plugin needs it.") + "</p>",
+                             QMessageBox::Information, QMessageBox::Ok, QMessageBox::NoButton, QMessageBox::NoButton );
+        success.exec();
+    } else {
+        QMessageBox failure( tr("Please enter a valid MAC"), "<p>" + tr("Please separate the six pairs of digits of your MAC like this: 01:02:03:04:05:06") + tr("</p>"),
+                             QMessageBox::Warning, QMessageBox::Ok, QMessageBox::NoButton, QMessageBox::NoButton );
+        failure.exec();
+    }
+}
+
+/// deletes the m_config pointer
+BluepingConfigWidget::~BluepingConfigWidget()
+{
+    delete m_config;
+}
+
+// does nothing (there's a button to save the config)
+void BluepingConfigWidget::writeConfig()
+{
+}
diff --git a/noncore/securityplugins/blueping/bluepingConfigWidget.h b/noncore/securityplugins/blueping/bluepingConfigWidget.h
new file mode 100644
index 0000000..bd1bec9
--- a/dev/null
+++ b/noncore/securityplugins/blueping/bluepingConfigWidget.h
@@ -0,0 +1,59 @@
+/**
+ * \file bluepingConfigWidget.h
+ * \brief "BluePing" plugin configuration widget
+ * \author Clément Séveillac (clement . seveillac (at) via . ecp . fr)
+ */
+/*
+               =.            This file is part of the Opie Project
+             .=l.            Copyright (C) 2004 Opie Developer Team <opie-devel@handhelds.org>
+           .>+-=
+ _;:,     .>    :=|.         This library is free software; you can
+.> <`_,   >  .   <=          redistribute it and/or  modify it under
+:`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
+.="- .-=="i,     .._         License as published by the Free Software
+ - .   .-<_>     .<>         Foundation; either version 2 of the License,
+     ._= =}       :          or (at your option) any later version.
+    .%`+i>       _;_.
+    .i_,=:_.      -<s.       This library is distributed in the hope that
+     +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
+    : ..    .:,     . . .    without even the implied warranty of
+    =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
+  _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
+..}^=.=       =       ;      Library General Public License for more
+++=   -.     .`     .:       details.
+ :     =  ...= . :.=-
+ -.   .:....=;==+<;          You should have received a copy of the GNU
+  -_. . .   )=.  =           Library General Public License along with
+    --        :-=`           this library; see the file COPYING.LIB.
+                             If not, write to the Free Software Foundation,
+                             Inc., 59 Temple Place - Suite 330,
+                             Boston, MA 02111-1307, USA.
+
+*/
+
+#ifndef BLUEPINGCONFIGWIDGET_H
+#define BLUEPINGCONFIGWIDGET_H
+#include <qlineedit.h>
+#include <qpushbutton.h>
+#include <qpe/config.h>
+
+#include <opie2/multiauthconfigwidget.h>
+
+class BluepingConfigWidget : public Opie::Security::MultiauthConfigWidget {
+
+    Q_OBJECT
+
+public:
+    BluepingConfigWidget(QWidget* parent, const char* name);
+    virtual ~BluepingConfigWidget();
+    virtual void writeConfig();
+private:
+    QLineEdit *editMAC;
+    QPushButton *setMAC;
+    Config *m_config;
+private slots:
+    void changeMAC();
+
+};
+
+#endif // BLUEPINGCONFIGWIDGET_H
diff --git a/noncore/securityplugins/blueping/bluepingplugin.cpp b/noncore/securityplugins/blueping/bluepingplugin.cpp
index 05fd3c2..f5d9ad6 100644
--- a/noncore/securityplugins/blueping/bluepingplugin.cpp
+++ b/noncore/securityplugins/blueping/bluepingplugin.cpp
@@ -1,200 +1,203 @@
 #include "bluepingplugin.h"
 
 #include <opie2/oapplication.h>
 #include <opie2/odebug.h>
 #include <opie2/odevice.h>
 
 #include <qdialog.h>
 #include <qlayout.h>
 #include <qhbox.h>
 #include <qlabel.h>
 #include <qpushbutton.h>
 #include <qtimer.h>
 
 using namespace Opie::Core;
 using Opie::Security::MultiauthPluginObject;
 using Opie::Security::MultiauthConfigWidget;
 
 
-/// creates and initializes the m_config Config object
-BluepingPlugin::BluepingPlugin() : MultiauthPluginObject(), m_ping(0) {
-    m_config = new Config("Security");
-    m_config->setGroup("BluepingPlugin");
+/// standard c'tor
+BluepingPlugin::BluepingPlugin() : MultiauthPluginObject(), m_ping(0), m_bluepingW(0) {
     bluetoothAlreadyRestarted = false;
 }
 
-/// deletes the m_config Config object and noticeW if necessary
+/// cleans m_ping if we need to
 BluepingPlugin::~BluepingPlugin() {
-    delete m_config;
     delete m_ping;
+    if (m_bluepingW != 0)
+        delete m_bluepingW;
 }
 
 /// Simply return its name (Blueping plugin)
 QString BluepingPlugin::pluginName() const {
     return "Blueping plugin";
 }
 
-/// no configuration widget for the moment
+/// returns a BluepingConfigWidget
 MultiauthConfigWidget * BluepingPlugin::configWidget(QWidget * parent) {
-    return 0l;
+    if (m_bluepingW == 0)
+        m_bluepingW = new BluepingConfigWidget(parent, "Blueping configuration widget");
+    return m_bluepingW;
 }
 QString BluepingPlugin::pixmapNameWidget() const {
     return "security/bluepingplugin";
 }
 QString BluepingPlugin::pixmapNameConfig() const {
-    return 0l;
+    return "security/bluepingplugin";
 }
 
 /// Emit the MultiauthPluginObject::Success emitCode
 void BluepingPlugin::success() {
     emit emitCode(MultiauthPluginObject::Success);
 }
 
 /// Emit the MultiauthPluginObject::Failure emitCode
 void BluepingPlugin::failure() {
     emit emitCode(MultiauthPluginObject::Failure);
 }
 
 /// Emit the MultiauthPluginObject::Skip emitCode
 void BluepingPlugin::skip() {
     emit emitCode(MultiauthPluginObject::Skip);
 }
 
 /// do the actual ping
 void BluepingPlugin::ping() {
     m_ping = new OProcess();
     odebug << "pinging device: " << macToPing << oendl;
     *m_ping << "l2ping" << "-c 1" << macToPing;
 
     // starting to ping in the background
     /// \todo as soon as ping is launched, check RSSI (signal strength) and check
     /// it's high enough, meaning the device is close enough?
     /// \todo make it optionally pollable, so don't finish the ping and call
     /// Opie suspend if l2ping timeouts?
     if ( !m_ping->start() ) {
         oerr << "could not start l2ping" << oendl;
         this->skip();
     }
     QObject::connect(m_ping, SIGNAL(processExited(Opie::Core::OProcess*)),
                      this, SLOT(pingFinished(Opie::Core::OProcess*)) );
 }
 
 /// Deals with m_ping result
     void BluepingPlugin::pingFinished(OProcess * ping) {
         if ( ping->normalExit() && (ping->exitStatus() == 0) )
         {
             odebug << "Successful Bluetooth ping!" << oendl;
             success();
         }
         else
         {
             odebug << "Failed Bluetooth ping..." << oendl;
             failure();
         }
     }
 
 /// Make one authentication attempt with this plugin
 /**
  * (very simple "success" / "failure" buttons in a dialog)
  * \return The outcome code of this  authentication
  */
 int BluepingPlugin::authenticate() {
 
     Config cfg("Security");
     cfg.setGroup("BluepingPlugin");
     macToPing = cfg.readEntry("mac");
     if (!macToPing.isEmpty())
     {
         /* Standard, inescapable authentication dialog
-         */
+        */
         QDialog bluepingDialog(0,
                                "Blueping dialog",
                                TRUE,
                                Qt::WStyle_NoBorder | Qt::WStyle_Customize | Qt::WStyle_StaysOnTop);
 
         QRect desk = oApp->desktop()->geometry();
         bluepingDialog.setGeometry( 0, 0, desk.width(), desk.height() );
 
         // Creation of the particular widgets of our Blueping user interface
         QVBoxLayout *layout = new QVBoxLayout(&bluepingDialog);
         layout->setSpacing(11);
         layout->setMargin(11);
         layout->setAlignment( Qt::AlignTop );
 
         QLabel title("<center><h1>\"Blueping\" <br />plugin</h1></center>", &bluepingDialog);
         QLabel subTitle("<center><h2>Trying to reach your configured bluetooth device...</h2></center>", &bluepingDialog);
         QLabel subTitle2("<center>You can skip this step and use another authentication way with the following button</center>", &bluepingDialog);
         QPushButton pbSkip("Skip", &bluepingDialog);
         layout->addWidget(&title);
         layout->addWidget(&subTitle);
         layout->addWidget(&subTitle2);
         layout->addWidget(&pbSkip, 0, Qt::AlignHCenter);
 
         // connect the skip button to the skip signal emitting function
         QObject::connect(&pbSkip, SIGNAL(clicked()), this, SLOT(skip()));
         // connect the signal emitting functions to the bluepingDialog done(int) finishing function
         QObject::connect(this, SIGNAL(emitCode(int)), &bluepingDialog, SLOT(done(int)));
 
+        // we can uncomment the following when testing
+        //bluetoothAlreadyRestarted = true;
         if (!bluetoothAlreadyRestarted)
         {
             // we have just started or resumed the device, so Bluetooth has to be (re)started
             OProcess killB;
             killB << "killall" << "hciattach";
             odebug << "killing Bluetooth..." << oendl;
             if ( !killB.start(OProcess::Block) ) {
                 oerr << "could not kill bluetooth" << oendl;
             }
 
             OProcess startB;
             switch ( ODevice::inst()->model() ) {
                 case Model_iPAQ_H39xx:
                     startB << "/sbin/hciattach" << "/dev/tts/1" << "bcsp" << "921600";
                     break;
 
                 case Model_iPAQ_H5xxx:
                     startB << "/sbin/hciattach" << "/dev/tts/1" << "any" << "921600";
                     break;
 
                 default:
                     startB << "/sbin/hciattach" << "/dev/ttySB0" << "bcsp" << "230400";
                     break;
             } // end switch on device models
 
             if ( !startB.start(OProcess::Block) ) {
                 oerr << "could not (re)start bluetooth" << oendl;
                 return MultiauthPluginObject::Skip;
             }
             else
             {
                 if ( startB.normalExit() && (startB.exitStatus() == 0) )
                 {
                     odebug << "hciattach exited normally."<< oendl;
                     bluetoothAlreadyRestarted = true;
                     // 500 ms timer, so l2ping won't try to find a route before bluetooth has \em really started
                     QTimer::singleShot( 500, this, SLOT(ping()) );
                 }
                 else
                 {
                     owarn << "hciattach exited anormally (error code: " << startB.exitStatus() << ")" << oendl;
                 } // end if startBluetooth exit status == 0
             } // end if startBluetooth started
         }
         else
         {
             // we don't need to wait, since bluetooth has been started long enough ago
             ping();
         } // end if bluetooth not restarted
 
 
         // start the dialog event loop, while the ping is starting (or will start soon) in the background
         return bluepingDialog.exec();
 
 
     }
     else
     {
         owarn << "No Bluetooth device has been set!" << oendl;
         owarn << "We will consider it as a successful authentication though." << oendl;
         return MultiauthPluginObject::Success;
     } // end if mac defined
 }
diff --git a/noncore/securityplugins/blueping/bluepingplugin.h b/noncore/securityplugins/blueping/bluepingplugin.h
index 0df3f78..b8d6734 100644
--- a/noncore/securityplugins/blueping/bluepingplugin.h
+++ b/noncore/securityplugins/blueping/bluepingplugin.h
@@ -1,81 +1,83 @@
 /**
  * \file bluepingplugin.h
  * \brief Standard Opie multiauth plugin definition
  * \author Clément Séveillac (clement . seveillac (at) via . ecp . fr)
  */
 /*
                =.            This file is part of the Opie Project
              .=l.            Copyright (C) 2004 Opie Developer Team <opie-devel@handhelds.org>
            .>+-=
  _;:,     .>    :=|.         This library is free software; you can 
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
  - .   .-<_>     .<>         Foundation; either version 2 of the License,
      ._= =}       :          or (at your option) any later version.
     .%`+i>       _;_.        
     .i_,=:_.      -<s.       This library is distributed in the hope that  
      +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
     : ..    .:,     . . .    without even the implied warranty of
     =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
   _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=       =       ;      Library General Public License for more
 ++=   -.     .`     .:       details.
  :     =  ...= . :.=-        
  -.   .:....=;==+<;          You should have received a copy of the GNU
   -_. . .   )=.  =           Library General Public License along with
     --        :-=`           this library; see the file COPYING.LIB. 
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 
 */
 
 #ifndef BLUEPING_PLUGIN_H
 #define BLUEPING_PLUGIN_H
 
+#include "bluepingConfigWidget.h"
+
 #include <opie2/multiauthplugininterface.h>
 
 #include <opie2/oprocess.h>
 
 #include <qobject.h>
 #include <qstring.h>
 #include <qpe/config.h>
 
 /// Multi-authentication bluetooth plugin, which tries to ping a specific MAC address.
 /**
  * The plugin itself, implementing the main authenticate() function.
  */
 class BluepingPlugin : public QObject, public Opie::Security::MultiauthPluginObject {
     
     Q_OBJECT
     
     public:
         BluepingPlugin();
         virtual ~BluepingPlugin();
         int authenticate();
         Opie::Security::MultiauthConfigWidget * configWidget(QWidget * parent);
         QString pixmapNameConfig() const;
         QString pixmapNameWidget() const;
         QString pluginName() const;
         
     signals:
         /// Signal carrying the result code of this plugin
         void emitCode(int resultCode);
         
     private slots:
         void success();
         void failure();
         void skip();
         void ping();
         void pingFinished(Opie::Core::OProcess * ping);
         
      private:
         Opie::Core::OProcess *m_ping;
-        Config * m_config;
+        BluepingConfigWidget * m_bluepingW;
         bool bluetoothAlreadyRestarted;
         QString macToPing;
 
 };
 
 #endif
diff --git a/noncore/securityplugins/blueping/bluepingplugin.pro b/noncore/securityplugins/blueping/bluepingplugin.pro
index 2cc0cd3..0946749 100644
--- a/noncore/securityplugins/blueping/bluepingplugin.pro
+++ b/noncore/securityplugins/blueping/bluepingplugin.pro
@@ -1,18 +1,18 @@
 TEMPLATE = lib
 CONFIG += qt warn_on
 
-        HEADERS         = bluepingplugin.h bluepingpluginimpl.h
+        HEADERS         = bluepingplugin.h bluepingpluginimpl.h bluepingConfigWidget.h
 
-        SOURCES         = bluepingplugin.cpp bluepingpluginimpl.cpp
+        SOURCES         = bluepingplugin.cpp bluepingpluginimpl.cpp bluepingConfigWidget.cpp
 
 
         INCLUDEPATH+= $(OPIEDIR)/include
         DEPENDPATH+=
 
         LIBS    += -lqpe -lopieui2 -lopiecore2 -lopiesecurity2
 
 DESTDIR = $(OPIEDIR)/plugins/security
 TARGET = multiauthbluepingplugin
 
 include ( $(OPIEDIR)/include.pro )