summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--libopie/odevice.cpp142
1 files changed, 112 insertions, 30 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index a134810..3ff029e 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -124,16 +124,19 @@ public:
virtual QValueList <OLed> ledList ( ) const;
virtual QValueList <OLedState> ledStateList ( OLed led ) const;
virtual OLedState ledState ( OLed led ) const;
virtual bool setLedState ( OLed led, OLedState st );
+ static bool isZaurus();
+
protected:
virtual void buzzer ( int snd );
OLedState m_leds [1];
+ bool m_embedix;
};
class SIMpad : public ODevice, public QWSServer::KeyboardFilter {
protected:
virtual void init ( );
virtual void initButtons ( );
@@ -380,16 +383,16 @@ static inline bool isQWS()
}
ODevice *ODevice::inst ( )
{
static ODevice *dev = 0;
- if ( !dev ) {
+ if ( !dev ) {
if ( QFile::exists ( "/proc/hal/model" ))
dev = new iPAQ ( );
- else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
+ else if ( Zaurus::isZaurus() )
dev = new Zaurus ( );
else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/cs3" ))
dev = new SIMpad ( );
else if ( QFile::exists ( "/proc/sys/board/name" ))
dev = new Ramses ( );
else
@@ -1317,18 +1320,56 @@ int iPAQ::lightSensorResolution ( ) const
/**************************************************
*
* Zaurus
*
**************************************************/
+// Check whether this device is the sharp zaurus..
+bool Zaurus::isZaurus()
+{
+
+ // If the special devices by embedix exist, it is quite simple: it is a Zaurus !
+ if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ) ){
+ return true;
+ }
+
+ // On non-embedix kenrnels, we have too look closer.
+ bool is_zaurus = false;
+ QFile f ( "/proc/cpuinfo" );
+ if ( f. open ( IO_ReadOnly ) ) {
+ QString model;
+ QFile f ( "/proc/cpuinfo" );
+
+ QTextStream ts ( &f );
+ QString line;
+ while( line = ts. readLine ( ) ) {
+ if ( line. left ( 8 ) == "Hardware" )
+ break;
+ }
+ int loc = line. find ( ":" );
+ if ( loc != -1 )
+ model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
+
+ if ( model == "Sharp-Collie"
+ || model == "Collie"
+ || model == "SHARP Corgi"
+ || model == "SHARP Shepherd"
+ || model == "SHARP Poodle"
+ )
+ is_zaurus = true;
+
+ }
+ return is_zaurus;
+}
void Zaurus::init ( )
{
d-> m_vendorstr = "Sharp";
d-> m_vendor = Vendor_Sharp;
+ m_embedix = true; // Not openzaurus means: It has an embedix kernel !
// QFile f ( "/proc/filesystems" );
QString model;
// It isn't a good idea to check the system configuration to
// detect the distribution !
@@ -1339,20 +1380,33 @@ void Zaurus::init ( )
QFile f ("/etc/oz_version");
if ( f.exists() ){
d-> m_vendorstr = "OpenZaurus Team";
d-> m_systemstr = "OpenZaurus";
d-> m_system = System_OpenZaurus;
- // f. close ( );
-
- // f. setName ( "/etc/oz_version" );
if ( f. open ( IO_ReadOnly )) {
QTextStream ts ( &f );
d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
f. close ( );
}
+
+ // Openzaurus sometimes uses the embedix kernel!
+ // => Check whether this is an embedix kernel
+ FILE *uname = popen("uname -r", "r");
+ QString line;
+ if ( f.open(IO_ReadOnly, uname) ) {
+ QTextStream ts ( &f );
+ line = ts. readLine ( );
+ int loc = line. find ( "embedix" );
+ if ( loc != -1 )
+ m_embedix = true;
+ else
+ m_embedix = false;
+ f. close ( );
+ }
+ pclose(uname);
}
else {
d-> m_systemstr = "Zaurus";
d-> m_system = System_Zaurus;
}
@@ -1372,16 +1426,16 @@ void Zaurus::init ( )
if ( model == "SHARP Corgi" ) {
d-> m_model = Model_Zaurus_SLC700;
d-> m_modelstr = "Zaurus SL-C700";
} else if ( model == "SHARP Shepherd" ) {
d-> m_model = Model_Zaurus_SLC700; // Do we need a special type for the C750 ? (eilers)
d-> m_modelstr = "Zaurus SL-C750";
- }else if ( model == "SHARP Poodle" ) {
+ } else if ( model == "SHARP Poodle" ) {
d-> m_model = Model_Zaurus_SLB600;
d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
- } else if ( model = "Sharp-Collie" ) {
+ } else if ( model == "Sharp-Collie" || model == "Collie" ) {
d-> m_model = Model_Zaurus_SL5500;
d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
} else {
d-> m_model = Model_Zaurus_SL5500;
d-> m_modelstr = "Zaurus (Model unknown)";
}
@@ -1440,22 +1494,25 @@ void Zaurus::initButtons ( )
struct z_button *zb = pz_buttons + i;
ODeviceButton b;
b. setKeycode ( zb-> code );
b. setUserText ( QObject::tr ( "Button", zb-> utext ));
b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
- b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
- b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
+ b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ),
+ zb-> fpressedaction ));
+ b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ),
+ zb-> fheldaction ));
d-> m_buttons-> append ( b );
}
reloadButtonMapping ( );
QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
- connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+ connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )),
+ this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
}
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
@@ -1521,22 +1578,21 @@ typedef struct sharp_led_status {
#define FL_IOCTL_STEP_CONTRAST 100
void Zaurus::buzzer ( int sound )
{
- // Not all devices have real sound.
#ifndef QT_NO_SOUND
- switch ( d-> m_model ) {
- case Model_Zaurus_SLC700:{
- int fd;
- int vol;
- bool vol_reset = false;
+ QString soundname;
+
+ // Not all devices have real sound. But I expect
+ // that Openzaurus now has a sound driver which
+ // I will use instead the buzzer...
+ if ( ( d->m_model == Model_Zaurus_SLC700 )
+ || d->m_system == System_OpenZaurus ){
- QString soundname;
-
switch ( sound ){
case SHARP_BUZ_SCHEDULE_ALARM:
soundname = "alarm";
break;
case SHARP_BUZ_TOUCHSOUND:
soundname = "touchsound";
@@ -1545,12 +1601,21 @@ void Zaurus::buzzer ( int sound )
soundname = "keysound";
break;
default:
soundname = "alarm";
}
+ }
+
+ // If a soundname is defined, we expect that this device has
+ // sound capabilities.. Otherwise we expect to have the buzzer
+ // device..
+ if ( !soundname.isEmpty() ){
+ int fd;
+ int vol;
+ bool vol_reset = false;
Sound snd ( soundname );
if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
Config cfg ( "qpe" );
@@ -1574,23 +1639,21 @@ void Zaurus::buzzer ( int sound )
if ( fd >= 0 ) {
if ( vol_reset )
::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
::close ( fd );
}
- break;
- }
- default:{ // Devices with buzzer
+ } else {
int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK );
if ( fd >= 0 ) {
::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
::close ( fd );
}
- }
- }
+
+ }
#endif
}
void Zaurus::alarmSound ( )
{
@@ -1631,12 +1694,15 @@ OLedState Zaurus::ledState ( OLed which ) const
else
return Led_Off;
}
bool Zaurus::setLedState ( OLed which, OLedState st )
{
+ if (!m_embedix) // Currently not supported on non_embedix kernels
+ return false;
+
static int fd = ::open ( "/dev/sharp_led", O_RDWR|O_NONBLOCK );
if ( which == Led_Mail ) {
if ( fd >= 0 ) {
struct sharp_led_status leds;
::memset ( &leds, 0, sizeof( leds ));
@@ -1658,12 +1724,17 @@ bool Zaurus::setLedState ( OLed which, OLedState st )
}
return false;
}
bool Zaurus::setSoftSuspend ( bool soft )
{
+ if (!m_embedix) {
+ /* non-Embedix kernels dont have kernel autosuspend */
+ return ODevice::setSoftSuspend( soft );
+ }
+
bool res = false;
int fd;
if ((( fd = ::open ( "/dev/apm_bios", O_RDWR )) >= 0 ) ||
(( fd = ::open ( "/dev/misc/apm_bios",O_RDWR )) >= 0 )) {
@@ -1699,26 +1770,37 @@ bool Zaurus::setDisplayBrightness ( int bright )
if ( bright > 255 )
bright = 255;
if ( bright < 0 )
bright = 0;
- if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
- int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
- if ( bright && !bl )
- bl = 1;
- res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
- ::close ( fd );
+ if (m_embedix) {
+ if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
+ int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
+ if ( bright && !bl )
+ bl = 1;
+ res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
+ ::close ( fd );
+ }
+ } else {
+#define FB_BACKLIGHT_SET_BRIGHTNESS _IOW('F', 1, u_int) /* set brightness */
+ if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) {
+ res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 );
+ ::close ( fd );
+ }
}
return res;
}
int Zaurus::displayBrightnessResolution ( ) const
{
- return 5;
+ if (m_embedix)
+ return 5;
+ else
+ return 256;
}
/**************************************************
*
* SIMpad
*