2 files changed, 2 insertions, 4 deletions

diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp
index 6d4624b..76f03a0 100644
--- a/libopie2/opiecore/device/odevice_simpad.cpp
+++ b/libopie2/opiecore/device/odevice_simpad.cpp
@@ -56,147 +56,145 @@
 using namespace Opie::Core;
 using namespace Opie::Core::Internal;
 
 struct s_button simpad_buttons [] = {
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Lower+Up"),
     "devicebuttons/simpad_lower_up",
     "datebook", "nextView()",
     "today", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Lower+Down"),
     "devicebuttons/simpad_lower_down",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Lower+Right"),
     "devicebuttons/simpad_lower_right",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Lower+Left"),
     "devicebuttons/simpad_lower_left",
     "opiemail", "raise()",
     "opiemail", "newMail()" },
 
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F5, QT_TRANSLATE_NOOP("Button", "Upper+Up"),
     "devicebuttons/simpad_upper_up",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F6, QT_TRANSLATE_NOOP("Button", "Upper+Down"),
     "devicebuttons/simpad_upper_down",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F7, QT_TRANSLATE_NOOP("Button", "Upper+Right"),
     "devicebuttons/simpad_upper_right",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Upper+Left"),
     "devicebuttons/simpad_upper_left",
     "QPE/Rotation", "flip()",
     "QPE/Rotation", "flip()" },
     /*
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"),
     "devicebuttons/simpad_lower_upper",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"),
     "devicebuttons/simpad_upper_lower",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     */
 };
 
 void SIMpad::init(const QString&)
 {
     d->m_vendorstr = "SIEMENS";
     d->m_vendor = Vendor_SIEMENS;
 
-    QFile f ( "/proc/hal/model" );
 
     //TODO Implement model checking
     //FIXME For now we assume an SL4
 
     d->m_modelstr = "SL4";
     d->m_model = Model_SIMpad_SL4;
 
     switch ( d->m_model ) {
         default:
             d->m_rotation = Rot0;
             d->m_direction = CCW;
             d->m_holdtime = 1000; // 1000ms
 
             break;
     }
 
     //Distribution detecting code is now in base class
-
     m_leds [0] = m_leds [1] = Led_Off;
 
     m_power_timer = 0;
 
 }
 
 void SIMpad::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     if ( isQWS( ) )
         QWSServer::setKeyboardFilter ( this );
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
         s_button *sb = simpad_buttons + i;
         ODeviceButton b;
 
         if (( sb->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( sb->code );
             b. setUserText ( QObject::tr ( "Button", sb->utext ));
             b. setPixmap ( Resource::loadPixmap ( sb->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
     connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
 #define SIMPAD_BACKLIGHT_MASK    0x00a10044
 
 QValueList <OLed> SIMpad::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
     //vl << Led_Mail; //TODO find out if LED1 is accessible anyway
diff --git a/libopie2/opiecore/device/odevice_simpad.h b/libopie2/opiecore/device/odevice_simpad.h
index 0f4e66f..d9ae5a5 100644
--- a/libopie2/opiecore/device/odevice_simpad.h
+++ b/libopie2/opiecore/device/odevice_simpad.h
@@ -1,87 +1,87 @@
 /*
                              This file is part of the Opie Project
                              Copyright (C) The Opie Team <opie-devel@handhelds.org>
               =.
             .=l.
            .>+-=
  _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
  - .   .-<_>     .<>         Foundation; either version 2 of the License,
      ._= =}       :          or (at your option) any later version.
     .%`+i>       _;_.
     .i_,=:_.      -<s.       This program is distributed in the hope that
      +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
     : ..    .:,     . . .    without even the implied warranty of
     =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
   _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=       =       ;      Library General Public License for more
 ++=   -.     .`     .:       details.
  :     =  ...= . :.=-
  -.   .:....=;==+<;          You should have received a copy of the GNU
   -_. . .   )=.  =           Library General Public License along with
     --        :-=`           this library; see the file COPYING.LIB.
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 */
 
 #ifndef ODEVICE_SIMPAD
 #define ODEVICE_SIMPAD
 
 #include <opie2/odevice.h>
 
 /* QT */
 #include <qwindowsystem_qws.h>
 
 namespace Opie {
 namespace Core {
 namespace Internal {
 
 class SIMpad : public ODevice, public QWSServer::KeyboardFilter
-{
+{ 
   protected:
     virtual void init(const QString&);
     virtual void initButtons();
 
   public:
     virtual bool setSoftSuspend( bool soft );
     virtual bool suspend();
 
     virtual bool setDisplayStatus( bool on );
     virtual bool setDisplayBrightness( int b );
     virtual int displayBrightnessResolution() const;
 
     virtual void playAlarmSound();
 
     virtual QValueList <OLed> ledList() const;
     virtual QValueList <OLedState> ledStateList( OLed led ) const;
     virtual OLedState ledState( OLed led ) const;
     virtual bool setLedState( OLed led, OLedState st );
 
   protected:
     virtual bool filter( int unicode, int keycode, int modifiers, bool isPress, bool autoRepeat );
     virtual void timerEvent( QTimerEvent *te );
 
     int m_power_timer;
 
-    OLedState m_leds [1];
+    OLedState m_leds [2];
 };
 
 struct s_button {
     uint model;
     Qt::Key code;
     char *utext;
     char *pix;
     char *fpressedservice;
     char *fpressedaction;
     char *fheldservice;
     char *fheldaction;
 };
 
 }
 }
 }
 
 #endif