-rw-r--r-- | core/launcher/transferserver.cpp | 14 | ||||
-rw-r--r-- | core/settings/security/security.cpp | 33 | ||||
-rw-r--r-- | core/settings/security/security.h | 1 | ||||
-rw-r--r-- | core/settings/security/securitybase.ui | 34 |
4 files changed, 77 insertions, 5 deletions
diff --git a/core/launcher/transferserver.cpp b/core/launcher/transferserver.cpp index 439e110..eea9f3a 100644 --- a/core/launcher/transferserver.cpp +++ b/core/launcher/transferserver.cpp @@ -101,210 +101,220 @@ TransferServer::~TransferServer() } void TransferServer::newConnection( int socket ) { ServerPI *ptr = new ServerPI( socket, this ); connect( ptr, SIGNAL(connectionClosed(ServerPI *)), this, SLOT( closed(ServerPI *)) ); connections.append( ptr ); } QString SyncAuthentication::serverId() { Config cfg("Security"); cfg.setGroup("Sync"); QString r = cfg.readEntry("serverid"); if ( r.isEmpty() ) { r = Opie::Global::uuid(); cfg.writeEntry("serverid", r ); } return r; } QString SyncAuthentication::ownerName() { QString vfilename = Global::applicationFileName("addressbook", "businesscard.vcf"); if (QFile::exists(vfilename)) { Contact c; c = Contact::readVCard( vfilename )[0]; return c.fullName(); } return QString::null; } QString SyncAuthentication::loginName() { struct passwd *pw = 0L; #ifndef Q_OS_WIN32 pw = getpwuid( geteuid() ); return QString::fromLocal8Bit( pw->pw_name ); #else //### revise return QString(); #endif } int SyncAuthentication::isAuthorized(QHostAddress peeraddress) { Config cfg("Security"); cfg.setGroup("Sync"); // QString allowedstr = cfg.readEntry("auth_peer","192.168.1.0"); uint auth_peer = cfg.readNumEntry("auth_peer", 0xc0a80100); // QHostAddress allowed; // allowed.setAddress(allowedstr); // uint auth_peer = allowed.ip4Addr(); uint auth_peer_bits = cfg.readNumEntry("auth_peer_bits", 24); uint mask = auth_peer_bits >= 32 // shifting by 32 is not defined ? 0xffffffff : (((1 << auth_peer_bits) - 1) << (32 - auth_peer_bits)); return (peeraddress.ip4Addr() & mask) == auth_peer; } bool SyncAuthentication::checkUser( const QString& user ) { if ( user.isEmpty() ) return FALSE; QString euser = loginName(); return user == euser; } bool SyncAuthentication::checkPassword( const QString& password ) { #ifdef ALLOW_UNIX_USER_FTP // First, check system password... struct passwd *pw = 0; struct spwd *spw = 0; pw = getpwuid( geteuid() ); spw = getspnam( pw->pw_name ); QString cpwd = QString::fromLocal8Bit( pw->pw_passwd ); if ( cpwd == "x" && spw ) cpwd = QString::fromLocal8Bit( spw->sp_pwdp ); // Note: some systems use more than crypt for passwords. QString cpassword = QString::fromLocal8Bit( crypt( password.local8Bit(), cpwd.local8Bit() ) ); if ( cpwd == cpassword ) return TRUE; #endif static int lastdenial=0; static int denials=0; int now = time(0); + Config cfg("Security"); + cfg.setGroup("Sync"); + QString syncapp = cfg.readEntry("syncapp","Qtopia"); + + //No password needed if the user really wants it + if (syncapp == "IntelliSync") { + return TRUE; + } + // Detect old Qtopia Desktop (no password) if ( password.isEmpty() ) { - if ( denials < 1 || now > lastdenial+600 ) { + if ( denials < 3 || now > lastdenial+600 ) { QMessageBox unauth( tr("Sync Connection"), tr("<p>An unauthorized system is requesting access to this device." "<p>If you are using a version of Qtopia Desktop older than 1.5.1, " - "please upgrade."), + "please upgrade or change the security setting to use IntelliSync." ), QMessageBox::Warning, QMessageBox::Cancel, QMessageBox::NoButton, QMessageBox::NoButton, 0, QString::null, TRUE, WStyle_StaysOnTop); unauth.setButtonText(QMessageBox::Cancel, tr("Deny")); unauth.exec(); denials++; lastdenial=now; } return FALSE; + } // Second, check sync password... static int lock=0; if ( lock ) return FALSE; ++lock; /* * we need to support old Sync software and QtopiaDesktop */ if ( password.left(6) == "Qtopia" || password.left(6) == "rootme" ) { Config cfg( "Security" ); cfg.setGroup("Sync"); QStringList pwds = cfg.readListEntry("Passwords",' '); for (QStringList::ConstIterator it=pwds.begin(); it!=pwds.end(); ++it) { #ifndef Q_OS_WIN32 QString cpassword = QString::fromLocal8Bit( crypt( password.mid(8).local8Bit(), (*it).left(2).latin1() ) ); #else // ### revise QString cpassword(""); #endif if ( *it == cpassword ) { lock--; return TRUE; } } // Unrecognized system. Be careful... QMessageBox unrecbox( tr("Sync Connection"), tr( "<p>An unrecognized system is requesting access to this device." "<p>If you have just initiated a Sync for the first time, this is normal."), QMessageBox::Warning, QMessageBox::Cancel, QMessageBox::Yes, QMessageBox::NoButton, 0, QString::null, TRUE, WStyle_StaysOnTop); unrecbox.setButtonText(QMessageBox::Cancel, tr("Deny")); unrecbox.setButtonText(QMessageBox::Yes, tr("Allow")); if ( (denials > 2 && now < lastdenial+600) || unrecbox.exec() != QMessageBox::Yes) { denials++; lastdenial=now; lock--; return FALSE; } else { const char salty[]="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789/."; char salt[2]; salt[0]= salty[rand() % (sizeof(salty)-1)]; salt[1]= salty[rand() % (sizeof(salty)-1)]; #ifndef Q_OS_WIN32 QString cpassword = QString::fromLocal8Bit( crypt( password.mid(8).local8Bit(), salt ) ); #else //### revise QString cpassword(""); #endif denials=0; pwds.prepend(cpassword); cfg.writeEntry("Passwords",pwds,' '); lock--; return TRUE; } } lock--; return FALSE; } ServerPI::ServerPI( int socket, QObject *parent, const char* name ) : QSocket( parent, name ) , dtp( 0 ), serversocket( 0 ), waitsocket( 0 ), storFileSize(-1) { state = Connected; setSocket( socket ); peerport = peerPort(); peeraddress = peerAddress(); #ifndef INSECURE if ( !SyncAuthentication::isAuthorized(peeraddress) ) { state = Forbidden; startTimer( 0 ); } else #endif { connect( this, SIGNAL( readyRead() ), SLOT( read() ) ); connect( this, SIGNAL( connectionClosed() ), SLOT( connectionClosed() ) ); passiv = FALSE; for( int i = 0; i < 4; i++ ) diff --git a/core/settings/security/security.cpp b/core/settings/security/security.cpp index 81363d2..1b90121 100644 --- a/core/settings/security/security.cpp +++ b/core/settings/security/security.cpp @@ -1,320 +1,351 @@ /********************************************************************** ** Copyright (C) 2000 Trolltech AS. All rights reserved. ** ** This file is part of Qtopia Environment. ** ** This file may be distributed and/or modified under the terms of the ** GNU General Public License version 2 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. ** ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ** ** See http://www.trolltech.com/gpl/ for GPL licensing information. ** ** Contact info@trolltech.com if any conditions of this licensing are ** not clear to you. ** **********************************************************************/ #include "security.h" #include <qpe/qpeapplication.h> #include <qpe/config.h> #include <qpe/password.h> #include <qpe/qpedialog.h> #include <qpe/qcopenvelope_qws.h> #include <qcheckbox.h> #include <qpushbutton.h> #include <qcombobox.h> #include <qmessagebox.h> #include <qfile.h> #include <qlistview.h> #include <qtextstream.h> Security::Security( QWidget* parent, const char* name, WFlags fl ) : SecurityBase( parent, name, TRUE, fl ) { valid=FALSE; Config cfg("Security"); cfg.setGroup("Passcode"); passcode = cfg.readEntry("passcode"); passcode_poweron->setChecked(cfg.readBoolEntry("passcode_poweron",FALSE)); cfg.setGroup("Sync"); int auth_peer = cfg.readNumEntry("auth_peer",0xc0a88100);//new default 192.168.129.0/24 int auth_peer_bits = cfg.readNumEntry("auth_peer_bits",24); selectNet(auth_peer,auth_peer_bits); connect(syncnet, SIGNAL(textChanged(const QString&)), this, SLOT(setSyncNet(const QString&))); + cfg.setGroup("Sync"); + QString sa = cfg.readEntry("syncapp","Qtopia"); + + //There must be a better way to do that... + for (int i=0; i<syncapp->count(); i++) { + if ( syncapp->text(i) == sa ) { + syncapp->setCurrentItem(i); + } + } + /* cfg.setGroup("Remote"); if ( telnetAvailable() ) telnet->setChecked(cfg.readEntry("allow_telnet")); else telnet->hide(); if ( sshAvailable() ) ssh->setChecked(cfg.readEntry("allow_ssh")); else ssh->hide(); */ QString configFile = QPEApplication::qpeDir() + "/etc/opie-login.conf"; Config loginCfg(configFile,Config::File); loginCfg.setGroup("General"); autoLoginName=loginCfg.readEntry("AutoLogin",""); if (autoLoginName.stripWhiteSpace().isEmpty()) { autoLogin=false; } else { autoLogin=true; } cfg.setGroup("SyncMode"); int mode = cfg.readNumEntry("Mode",2); // Default to Sharp syncModeCombo->setCurrentItem( mode - 1 ); connect(autologinToggle, SIGNAL(toggled(bool)), this, SLOT(toggleAutoLogin(bool))); connect(userlist, SIGNAL(activated(int)), this, SLOT(changeLoginName(int))); connect(changepasscode,SIGNAL(clicked()), this, SLOT(changePassCode())); connect(clearpasscode,SIGNAL(clicked()), this, SLOT(clearPassCode())); + connect(syncapp,SIGNAL(activated(int)), this, SLOT(changeSyncApp())); loadUsers(); updateGUI(); dl = new QPEDialogListener(this); showMaximized(); } Security::~Security() { } void Security::updateGUI() { bool empty = passcode.isEmpty(); changepasscode->setText( empty ? tr("Set passcode" ) : tr("Change passcode" ) ); passcode_poweron->setEnabled( !empty ); clearpasscode->setEnabled( !empty ); autologinToggle->setChecked(autoLogin); userlist->setEnabled(autoLogin); - } void Security::show() { //valid=FALSE; setEnabled(FALSE); SecurityBase::show(); if ( passcode.isEmpty() ) { // could insist... //changePassCode(); //if ( passcode.isEmpty() ) //reject(); } else { if (!valid) // security passcode was not asked yet, so ask now { QString pc = enterPassCode(tr("Enter passcode")); if ( pc != passcode ) { QMessageBox::critical(this, tr("Passcode incorrect"), tr("The passcode entered is incorrect.\nAccess denied")); reject(); return; } } } setEnabled(TRUE); valid=TRUE; } void Security::accept() { applySecurity(); QDialog::accept(); QCopEnvelope env("QPE/System", "securityChanged()" ); } void Security::done(int r) { QDialog::done(r); close(); } void Security::selectNet(int auth_peer,int auth_peer_bits) { QString sn; if ( auth_peer_bits == 0 && auth_peer == 0 ) { sn = tr("Any"); } else if ( auth_peer_bits == 32 && auth_peer == 0 ) { sn = tr("None"); } else { sn = QString::number((auth_peer>>24)&0xff) + "." + QString::number((auth_peer>>16)&0xff) + "." + QString::number((auth_peer>>8)&0xff) + "." + QString::number((auth_peer>>0)&0xff) + "/" + QString::number(auth_peer_bits); } for (int i=0; i<syncnet->count(); i++) { if ( syncnet->text(i).left(sn.length()) == sn ) { syncnet->setCurrentItem(i); return; } } qDebug("No match for \"%s\"",sn.latin1()); } void Security::parseNet(const QString& sn,int& auth_peer,int& auth_peer_bits) { auth_peer=0; if ( sn == tr("Any") ) { auth_peer = 0; auth_peer_bits = 0; } else if ( sn == tr("None") ) { auth_peer = 0; auth_peer_bits = 32; } else { int x=0; for (int i=0; i<4; i++) { int nx = sn.find(QChar(i==3 ? '/' : '.'),x); auth_peer = (auth_peer<<8)|sn.mid(x,nx-x).toInt(); x = nx+1; } uint n = (uint)sn.find(' ',x)-x; auth_peer_bits = sn.mid(x,n).toInt(); } } void Security::loadUsers ( void ) { QFile passwd("/etc/passwd"); if ( passwd.open(IO_ReadOnly) ) { QTextStream t( &passwd ); QString s; QStringList account; while ( !t.eof() ) { account = QStringList::split(':',t.readLine()); // Hide disabled accounts if (*account.at(1)!="*") { userlist->insertItem(*account.at(0)); // Highlight this item if it is set to autologinToggle if ( *account.at(0) == autoLoginName) userlist->setCurrentItem(userlist->count()-1); } } passwd.close(); } } void Security::toggleAutoLogin(bool val) { autoLogin=val; userlist->setEnabled(val); if (!autoLogin) autoLoginName=userlist->currentText(); } void Security::setSyncNet(const QString& sn) { int auth_peer,auth_peer_bits; parseNet(sn,auth_peer,auth_peer_bits); selectNet(auth_peer,auth_peer_bits); } void Security::applySecurity() { if ( valid ) { Config cfg("Security"); cfg.setGroup("Passcode"); cfg.writeEntry("passcode",passcode); cfg.writeEntry("passcode_poweron",passcode_poweron->isChecked()); cfg.setGroup("Sync"); int auth_peer=0; int auth_peer_bits; QString sn = syncnet->currentText(); parseNet(sn,auth_peer,auth_peer_bits); cfg.writeEntry("auth_peer",auth_peer); cfg.writeEntry("auth_peer_bits",auth_peer_bits); + cfg.writeEntry("syncapp",syncapp->currentText()); + /* cfg.setGroup("Remote"); if ( telnetAvailable() ) cfg.writeEntry("allow_telnet",telnet->isChecked()); if ( sshAvailable() ) cfg.writeEntry("allow_ssh",ssh->isChecked()); // ### write ssh/telnet sys config files */ QString configFile = QPEApplication::qpeDir() + "/etc/opie-login.conf"; Config loginCfg(configFile,Config::File); loginCfg.setGroup("General"); if (autoLogin) { loginCfg.writeEntry("AutoLogin",autoLoginName); } else { loginCfg.removeEntry("AutoLogin"); } } } +void Security::changeSyncApp() +{ + // Don't say i didn't tell ya + if (syncapp->currentText() == "IntelliSync") { + QMessageBox attn( + tr("WARNING"), + tr("<p>Selecting IntelliSync here will disable the FTP password." + "<p>Every machine in your netrange will be able to sync with " + "your Zaurus!"), + QMessageBox::Warning, + QMessageBox::Cancel, QMessageBox::NoButton, QMessageBox::NoButton, + 0, QString::null, TRUE, WStyle_StaysOnTop); + attn.setButtonText(QMessageBox::Cancel, tr("Ok")); + attn.exec(); + } + updateGUI(); +} + + void Security::changeLoginName( int idx ) { autoLoginName = userlist->text(idx);; updateGUI(); } void Security::changePassCode() { QString new1; QString new2; do { new1 = enterPassCode(tr("Enter new passcode")); if ( new1.isNull() ) return; new2 = enterPassCode(tr("Re-enter new passcode")); if ( new2.isNull() ) return; } while (new1 != new2); passcode = new1; updateGUI(); } void Security::clearPassCode() { passcode = QString::null; updateGUI(); } QString Security::enterPassCode(const QString& prompt) { return Password::getPassword(prompt); } bool Security::telnetAvailable() const { // ### not implemented return FALSE; } bool Security::sshAvailable() const { // ### not implemented return FALSE; } diff --git a/core/settings/security/security.h b/core/settings/security/security.h index 52d56de..b1a3eca 100644 --- a/core/settings/security/security.h +++ b/core/settings/security/security.h @@ -1,71 +1,72 @@ /********************************************************************** ** Copyright (C) 2000 Trolltech AS. All rights reserved. ** ** This file is part of Qtopia Environment. ** ** This file may be distributed and/or modified under the terms of the ** GNU General Public License version 2 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. ** ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ** ** See http://www.trolltech.com/gpl/ for GPL licensing information. ** ** Contact info@trolltech.com if any conditions of this licensing are ** not clear to you. ** **********************************************************************/ #ifndef SECURITY_H #define SECURITY_H #include "securitybase.h" class QPEDialogListener; class Security : public SecurityBase { Q_OBJECT public: static QString appName() { return QString::fromLatin1("security"); } Security( QWidget* parent = 0, const char* name = 0, WFlags fl = 0 ); ~Security(); void show(); protected: void accept(); void applySecurity(); void done(int); private slots: void changePassCode(); void clearPassCode(); void setSyncNet(const QString&); void changeLoginName(int); void toggleAutoLogin(bool); + void changeSyncApp(); private: void loadUsers(void); bool telnetAvailable() const; bool sshAvailable() const; void updateGUI(); static void parseNet(const QString& sn,int& auth_peer,int& auth_peer_bits); void selectNet(int auth_peer,int auth_peer_bits); QString enterPassCode(const QString&); QString passcode; bool valid; bool autoLogin; QString autoLoginName; QPEDialogListener *dl; }; #endif // SECURITY_H diff --git a/core/settings/security/securitybase.ui b/core/settings/security/securitybase.ui index 9fb63a8..934111e 100644 --- a/core/settings/security/securitybase.ui +++ b/core/settings/security/securitybase.ui @@ -1,110 +1,110 @@ <!DOCTYPE UI><UI> <class>SecurityBase</class> <widget> <class>QDialog</class> <property stdset="1"> <name>name</name> <cstring>SecurityBase</cstring> </property> <property stdset="1"> <name>geometry</name> <rect> <x>0</x> <y>0</y> - <width>329</width> + <width>321</width> <height>483</height> </rect> </property> <property stdset="1"> <name>caption</name> <string>Security Settings</string> </property> <property> <name>layoutMargin</name> </property> <property> <name>layoutSpacing</name> </property> <vbox> <property stdset="1"> <name>margin</name> <number>0</number> </property> <property stdset="1"> <name>spacing</name> <number>0</number> </property> <widget> <class>QTabWidget</class> <property stdset="1"> <name>name</name> <cstring>TabWidget2</cstring> </property> <property> <name>layoutMargin</name> </property> <widget> <class>QWidget</class> <property stdset="1"> <name>name</name> <cstring>tab</cstring> </property> <attribute> <name>title</name> <string>Passcode</string> </attribute> <vbox> <property stdset="1"> <name>margin</name> <number>6</number> </property> <property stdset="1"> <name>spacing</name> <number>6</number> </property> <widget> <class>QGroupBox</class> <property stdset="1"> <name>name</name> <cstring>GroupBox4</cstring> </property> <property stdset="1"> <name>title</name> <string>Passcode</string> </property> <vbox> <property stdset="1"> <name>margin</name> <number>11</number> </property> <property stdset="1"> <name>spacing</name> <number>6</number> </property> <widget> <class>QLayoutWidget</class> <property stdset="1"> <name>name</name> <cstring>Layout1</cstring> </property> <property> <name>layoutSpacing</name> </property> <hbox> <property stdset="1"> <name>margin</name> <number>0</number> </property> <property stdset="1"> <name>spacing</name> <number>-1</number> </property> <widget> <class>QPushButton</class> <property stdset="1"> <name>name</name> <cstring>changepasscode</cstring> </property> <property stdset="1"> <name>text</name> <string>Change passcode</string> @@ -189,249 +189,279 @@ </vbox> </widget> <widget> <class>QWidget</class> <property stdset="1"> <name>name</name> <cstring>tab</cstring> </property> <attribute> <name>title</name> <string>Login</string> </attribute> <vbox> <property stdset="1"> <name>margin</name> <number>6</number> </property> <property stdset="1"> <name>spacing</name> <number>6</number> </property> <widget> <class>QGroupBox</class> <property stdset="1"> <name>name</name> <cstring>GroupBox3</cstring> </property> <property stdset="1"> <name>title</name> <string>Login</string> </property> <vbox> <property stdset="1"> <name>margin</name> <number>11</number> </property> <property stdset="1"> <name>spacing</name> <number>6</number> </property> <widget> <class>QCheckBox</class> <property stdset="1"> <name>name</name> <cstring>autologinToggle</cstring> </property> <property stdset="1"> <name>text</name> <string>Login Automatically</string> </property> </widget> <widget> <class>QComboBox</class> <property stdset="1"> <name>name</name> <cstring>userlist</cstring> </property> </widget> </vbox> </widget> <spacer> <property> <name>name</name> <cstring>Spacer2</cstring> </property> <property stdset="1"> <name>orientation</name> <enum>Vertical</enum> </property> <property stdset="1"> <name>sizeType</name> <enum>Expanding</enum> </property> <property> <name>sizeHint</name> <size> <width>20</width> <height>20</height> </size> </property> </spacer> </vbox> </widget> <widget> <class>QWidget</class> <property stdset="1"> <name>name</name> <cstring>tab</cstring> </property> <attribute> <name>title</name> <string>Sync</string> </attribute> <vbox> <property stdset="1"> <name>margin</name> - <number>6</number> + <number>11</number> </property> <property stdset="1"> <name>spacing</name> <number>6</number> </property> <widget> <class>QGroupBox</class> <property stdset="1"> <name>name</name> <cstring>GroupBox2</cstring> </property> <property stdset="1"> <name>title</name> <string>Sync</string> </property> <vbox> <property stdset="1"> <name>margin</name> <number>11</number> </property> <property stdset="1"> <name>spacing</name> <number>6</number> </property> <widget> <class>QLabel</class> <property stdset="1"> <name>name</name> <cstring>TextLabel1_2</cstring> </property> <property stdset="1"> <name>text</name> <string>Accept sync from network:</string> </property> <property stdset="1"> <name>textFormat</name> <enum>RichText</enum> </property> </widget> <widget> <class>QComboBox</class> <item> <property> <name>text</name> <string>192.168.129.0/24 (default)</string> </property> </item> <item> <property> <name>text</name> <string>192.168.1.0/24</string> </property> </item> <item> <property> <name>text</name> <string>192.168.0.0/16</string> </property> </item> <item> <property> <name>text</name> <string>172.16.0.0/12</string> </property> </item> <item> <property> <name>text</name> <string>10.0.0.0/8</string> </property> </item> <item> <property> <name>text</name> <string>1.0.0.0/8</string> </property> </item> <item> <property> <name>text</name> <string>Any</string> </property> </item> <item> <property> <name>text</name> <string>None</string> </property> </item> <property stdset="1"> <name>name</name> <cstring>syncnet</cstring> </property> <property stdset="1"> <name>editable</name> <bool>true</bool> </property> </widget> <widget> + <class>QLabel</class> + <property stdset="1"> + <name>name</name> + <cstring>TextLabel2</cstring> + </property> + <property stdset="1"> + <name>text</name> + <string>Select your sync software</string> + </property> + </widget> + <widget> + <class>QComboBox</class> + <item> + <property> + <name>text</name> + <string>QTopia</string> + </property> + </item> + <item> + <property> + <name>text</name> + <string>IntelliSync</string> + </property> + </item> + <property stdset="1"> + <name>name</name> + <cstring>syncapp</cstring> + </property> + </widget> + <widget> <class>QComboBox</class> <item> <property> <name>text</name> <string>Qtopia 1.7</string> </property> </item> <item> <property> <name>text</name> <string>Opie 1.0</string> </property> </item> <item> <property> <name>text</name> <string>Both</string> </property> </item> <property stdset="1"> <name>name</name> <cstring>syncModeCombo</cstring> </property> </widget> </vbox> </widget> <spacer> <property> <name>name</name> <cstring>Spacer1</cstring> </property> <property stdset="1"> <name>orientation</name> <enum>Vertical</enum> </property> <property stdset="1"> <name>sizeType</name> <enum>Expanding</enum> </property> <property> <name>sizeHint</name> <size> <width>20</width> <height>20</height> </size> </property> </spacer> </vbox> </widget> </widget> </vbox> </widget> </UI> |