1 files changed, 8 insertions, 8 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index c0b6efa..4258d60 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -343,385 +343,385 @@ struct s_button {
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F6, QT_TRANSLATE_NOOP("Button", "Upper+Down"),
     "devicebuttons/simpad_upper_down",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F7, QT_TRANSLATE_NOOP("Button", "Upper+Right"),
     "devicebuttons/simpad_upper_right",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Upper+Left"),
     "devicebuttons/simpad_upper_left",
     "QPE/Rotation", "flip()",
     "QPE/Rotation", "flip()" },
     /*
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"),
     "devicebuttons/simpad_lower_upper",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"),
     "devicebuttons/simpad_upper_lower",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     */
 };
 
 struct r_button {
         uint model;
     Qt::Key code;
     char *utext;
     char *pix;
     char *fpressedservice;
     char *fpressedaction;
     char *fheldservice;
     char *fheldaction;
 } ramses_buttons [] = {
     { Model_Ramses_MNCI,
     Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
         "devicebuttons/z_menu",
          "QPE/TaskBar", "toggleMenu()",
         "QPE/TaskBar", "toggleStartMenu()" },
     { Model_Ramses_MNCI,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
         "devicebuttons/ipaq_home",
         "QPE/Launcher", "home()",
         "buttonsettings", "raise()" },
 };
 
 class Yopy : public ODevice {
 protected:
   virtual void init ( );
   virtual void initButtons ( );
 
 public:
   virtual bool suspend ( );
 
   virtual bool setDisplayBrightness ( int b );
   virtual int displayBrightnessResolution ( ) const;
 
   static bool isYopy ( );
 };
 
 struct yopy_button {
     Qt::Key code;
     char *utext;
     char *pix;
     char *fpressedservice;
     char *fpressedaction;
     char *fheldservice;
     char *fheldaction;
 } yopy_buttons [] = {
   { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Action Button"),
     "devicebuttons/yopy_action",
     "datebook", "nextView()",
     "today", "raise()" },
   { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "OK Button"),
     "devicebuttons/yopy_ok",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
   { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "End Button"),
     "devicebuttons/yopy_end",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
 };
 
 static QCString makeChannel ( const char *str )
 {
         if ( str && !::strchr ( str, '/' ))
                 return QCString ( "QPE/Application/" ) + str;
         else
                 return str;
 }
 
 static inline bool isQWS()
 {
         return qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 }
 
 ODevice *ODevice::inst ( )
 {
         static ODevice *dev = 0;
 
         if ( !dev ) {
                 if ( QFile::exists ( "/proc/hal/model" ))
                         dev = new iPAQ ( );
                 else if ( Zaurus::isZaurus() )
                         dev = new Zaurus ( );
                 else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/cs3" ))
                         dev = new SIMpad ( );
                 else if ( QFile::exists ( "/proc/sys/board/name" ))
                         dev = new Ramses ( );
                 else if ( Yopy::isYopy() )
                         dev = new Yopy ( );
                 else if ( Jornada::isJornada() )
                         dev = new Jornada ( );
                 else
                         dev = new ODevice ( );
                 dev-> init ( );
         }
         return dev;
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
         d = new ODeviceData;
 
         d-> m_modelstr = "Unknown";
         d-> m_model = Model_Unknown;
         d-> m_vendorstr = "Unknown";
         d-> m_vendor = Vendor_Unknown;
         d-> m_systemstr = "Unknown";
         d-> m_system = System_Unknown;
         d-> m_sysverstr = "0.0";
         d-> m_rotation = Rot0;
         d-> m_direction = CW;
 
         d-> m_holdtime = 1000; // 1000ms
         d-> m_buttons = 0;
         d-> m_cpu_frequencies = new QStrList;
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
         if ( msg == "deviceButtonMappingChanged()" ) {
                 reloadButtonMapping ( );
         }
 }
 
 void ODevice::init ( )
 {
 }
 
 /**
  * This method initialises the  button mapping
  */
 void ODevice::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         // Simulation uses iPAQ 3660 device buttons
 
         qDebug ( "init Buttons" );
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                 i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
 
                 if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {
                         b. setKeycode ( ib-> code );
                         b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 ODevice::~ODevice ( )
 {
 // we leak m_devicebuttons and m_cpu_frequency
 // but it's a singleton and it is not so importantant
 // -zecke
         delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
         return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 /**
  * This method will try to suspend the device
  * It only works if the user is the QWS Server and the apm application
  * is installed.
  * It tries to suspend and then waits some time cause some distributions
  * do have asynchronus apm implementations.
  * This method will either fail and return false or it'll suspend the
  * device and return once the device got woken up
  *
  * @return if the device got suspended
  */
 bool ODevice::suspend ( )
 {
         qDebug("ODevice::suspend");
         if ( !isQWS( ) ) // only qwsserver is allowed to suspend
                 return false;
 
         if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
                 return false;
 
         bool res = false;
 
         struct timeval tvs, tvn;
         ::gettimeofday ( &tvs, 0 );
 
         ::sync ( ); // flush fs caches
         res = ( ::system ( "apm --suspend" ) == 0 );
 
         // This is needed because the iPAQ apm implementation is asynchronous and we
         // can not be sure when exactly the device is really suspended
         // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
         if ( res ) {
                 do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
                         ::usleep ( 200 * 1000 );
                         ::gettimeofday ( &tvn, 0 );
                 } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
         }
 
         return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 /**
  * This sets the display on or off
  */
 bool ODevice::setDisplayStatus ( bool on )
 {
         qDebug("ODevice::setDisplayStatus(%d)", on);
 
         if ( d-> m_model == Model_Unknown )
                 return false;
 
         bool res = false;
         int fd;
 
         if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
                 res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
                 ::close ( fd );
         }
         return res;
 }
 
 /**
  * This sets the display brightness
  *
  * @param p The brightness to be set on a scale from 0 to 255
  * @return success or failure
  */
 bool ODevice::setDisplayBrightness ( int p)
 {
         Q_UNUSED( p )
         return false;
 }
 
 /**
  * @return returns the number of steppings on the brightness slider
  * in the Light-'n-Power settings.
  */
 int ODevice::displayBrightnessResolution ( ) const
 {
         return 16;
 }
 
 /**
  * This sets the display contrast
  * @param p The contrast to be set on a scale from 0 to 255
  * @return success or failure
  */
 bool ODevice::setDisplayContrast ( int p)
 {
         Q_UNUSED( p )
         return false;
 }
 
 /**
  * @return return the max value for the brightness settings slider
  *         or 0 if the device doesn't support setting of a contrast
  */
 int ODevice::displayContrastResolution ( ) const
 {
         return 0;
 }
 
 /**
  * This returns the vendor as string
  * @return Vendor as QString
  */
 QString ODevice::vendorString ( ) const
 {
         return d-> m_vendorstr;
 }
 
 /**
  * This returns the vendor as one of the values of OVendor
  * @return OVendor
  */
 OVendor ODevice::vendor ( ) const
 {
         return d-> m_vendor;
 }
 
 /**
  * This returns the model as a string
  * @return A string representing the model
  */
 QString ODevice::modelString ( ) const
 {
         return d-> m_modelstr;
 }
 
 /**
  * This does return the OModel used
  */
 OModel ODevice::model ( ) const
 {
         return d-> m_model;
 }
 
 /**
  * This does return the systen name
  */
 QString ODevice::systemString ( ) const
 {
         return d-> m_systemstr;
 }
 
 /**
  * Return System as OSystem value
  */
 OSystem ODevice::system ( ) const
 {
         return d-> m_system;
 }
 
 /**
  * @return the version string of the base system
  */
 QString ODevice::systemVersionString ( ) const
 {
         return d-> m_sysverstr;
 }
 
 /**
@@ -923,534 +923,534 @@ uint ODevice::buttonHoldTime ( ) const
         return d-> m_holdtime;
 }
 
 /**
  * This method return a ODeviceButton for a key code
  * or 0 if no special hardware button is available for the device
  *
  * @return The devicebutton or 0l
  * @see ODeviceButton
  */
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
         initButtons ( );
 
         for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons-> begin ( ); it != d-> m_buttons-> end ( ); ++it ) {
                 if ( (*it). keycode ( ) == code )
                         return &(*it);
         }
         return 0;
 }
 
 void ODevice::reloadButtonMapping ( )
 {
         initButtons ( );
 
         Config cfg ( "ButtonSettings" );
 
         for ( uint i = 0; i < d-> m_buttons-> count ( ); i++ ) {
                 ODeviceButton &b = ( *d-> m_buttons ) [i];
                 QString group = "Button" + QString::number ( i );
 
                 QCString pch, hch;
                 QCString pm, hm;
                 QByteArray pdata, hdata;
 
                 if ( cfg. hasGroup ( group )) {
                         cfg. setGroup ( group );
                         pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( );
                         pm  = cfg. readEntry ( "PressedActionMessage" ). latin1 ( );
                         // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
                         hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( );
                         hm  = cfg. readEntry ( "HeldActionMessage" ). latin1 ( );
                         // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
                 }
 
                 b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
 
                 b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
         }
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
         initButtons ( );
 
         QString mb_chan;
 
         if ( button >= (int) d-> m_buttons-> count ( ))
                 return;
 
         ODeviceButton &b = ( *d-> m_buttons ) [button];
         b. setPressedAction ( action );
 
         mb_chan=b. pressedAction ( ). channel ( );
 
         Config buttonFile ( "ButtonSettings" );
         buttonFile. setGroup ( "Button" + QString::number ( button ));
         buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
         buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
 
         //buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
 
         QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
         initButtons ( );
 
         if ( button >= (int) d-> m_buttons-> count ( ))
                 return;
 
         ODeviceButton &b = ( *d-> m_buttons ) [button];
             b. setHeldAction ( action );
 
         Config buttonFile ( "ButtonSettings" );
         buttonFile. setGroup ( "Button" + QString::number ( button ));
         buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( ));
         buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( ));
 
         //buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( )));
 
         QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 void ODevice::virtual_hook(int id, void* data){
     switch( id ) {
     case VIRTUAL_ROTATION:{
         VirtRotation* rot = reinterpret_cast<VirtRotation*>( data );
         rot->trans = d->m_rotation;
         break;
     }
     case VIRTUAL_DIRECTION:{
         VirtDirection *dir = reinterpret_cast<VirtDirection*>( data );
         dir->direct = d->m_direction;
         break;
     }
     case VIRTUAL_HAS_HINGE:{
         VirtHasHinge *hin = reinterpret_cast<VirtHasHinge*>( data );
         hin->hasHinge = false;
         break;
     }
     case VIRTUAL_HINGE:{
         VirtHingeStatus *hin = reinterpret_cast<VirtHingeStatus*>( data );
         hin->hingeStat = CASE_UNKNOWN;
         break;
     }
     }
 }
 
 /**************************************************
  *
  * Yopy 3500/3700
  *
  **************************************************/
 
 bool Yopy::isYopy ( )
 {
   QFile f( "/proc/cpuinfo" );
   if ( f. open ( IO_ReadOnly ) ) {
     QTextStream ts ( &f );
     QString line;
     while( line = ts. readLine ( ) ) {
       if ( line. left ( 8 ) == "Hardware" ) {
         int loc = line. find ( ":" );
         if ( loc != -1 ) {
           QString model =
             line. mid ( loc + 2 ). simplifyWhiteSpace( );
           return ( model == "Yopy" );
         }
       }
     }
   }
   return false;
 }
 
 void Yopy::init ( )
 {
   d-> m_vendorstr = "G.Mate";
   d-> m_vendor = Vendor_GMate;
   d-> m_modelstr = "Yopy3700";
   d-> m_model = Model_Yopy_3700;
   d-> m_rotation = Rot0;
 
   d-> m_systemstr = "Linupy";
   d-> m_system = System_Linupy;
 
   QFile f ( "/etc/issue" );
   if ( f. open ( IO_ReadOnly )) {
     QTextStream ts ( &f );
     ts.readLine();
     d-> m_sysverstr = ts. readLine ( );
     f. close ( );
   }
 }
 
 void Yopy::initButtons ( )
 {
   if ( d-> m_buttons )
     return;
 
   d-> m_buttons = new QValueList <ODeviceButton>;
 
   for (uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof(yopy_button)); i++) {
 
     yopy_button *ib = yopy_buttons + i;
 
     ODeviceButton b;
 
     b. setKeycode ( ib-> code );
     b. setUserText ( QObject::tr ( "Button", ib-> utext ));
     b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
     b. setFactoryPresetPressedAction
       (OQCopMessage(makeChannel(ib->fpressedservice), ib->fpressedaction));
     b. setFactoryPresetHeldAction
       (OQCopMessage(makeChannel(ib->fheldservice), ib->fheldaction));
 
     d-> m_buttons-> append ( b );
   }
   reloadButtonMapping ( );
 
   QCopChannel *sysch = new QCopChannel("QPE/System", this);
-  connect(sysch, SIGNAL(received(const QCString &, const QByteArray & )),
-          this, SLOT(systemMessage(const QCString &, const QByteArray & )));
+  connect(sysch, SIGNAL(received(const QCString&,const QByteArray&)),
+          this, SLOT(systemMessage(const QCString&,const QByteArray&)));
 }
 
 bool Yopy::suspend()
 {
   /* Opie for Yopy does not implement its own power management at the
      moment.  The public version runs parallel to X, and relies on the
      existing power management features. */
   return false;
 }
 
 bool Yopy::setDisplayBrightness(int bright)
 {
   /* The code here works, but is disabled as the current version runs
      parallel to X, and relies on the existing backlight demon. */
 #if 0
   if ( QFile::exists("/proc/sys/pm/light") ) {
     int fd = ::open("/proc/sys/pm/light", O_WRONLY);
     if (fd >= 0 ) {
       if (bright)
         ::write(fd, "1\n", 2);
       else
         ::write(fd, "0\n", 2);
       ::close(fd);
       return true;
     }
   }
 #endif
   return false;
 }
 
 int Yopy::displayBrightnessResolution() const
 {
   return 2;
 }
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
         d-> m_vendorstr = "HP";
         d-> m_vendor = Vendor_HP;
 
         QFile f ( "/proc/hal/model" );
 
         if ( f. open ( IO_ReadOnly )) {
                 QTextStream ts ( &f );
 
                 d-> m_modelstr = "H" + ts. readLine ( );
 
                 if ( d-> m_modelstr == "H3100" )
                         d-> m_model = Model_iPAQ_H31xx;
                 else if ( d-> m_modelstr == "H3600" )
                         d-> m_model = Model_iPAQ_H36xx;
                 else if ( d-> m_modelstr == "H3700" )
                         d-> m_model = Model_iPAQ_H37xx;
                 else if ( d-> m_modelstr == "H3800" )
                         d-> m_model = Model_iPAQ_H38xx;
                 else if ( d-> m_modelstr == "H3900" )
                         d-> m_model = Model_iPAQ_H39xx;
                 else if ( d-> m_modelstr == "H5400" )
                         d-> m_model = Model_iPAQ_H5xxx;
                 else
                         d-> m_model = Model_Unknown;
 
                 f. close ( );
         }
 
         switch ( d-> m_model ) {
                 case Model_iPAQ_H31xx:
                 case Model_iPAQ_H38xx:
                         d-> m_rotation = Rot90;
                         break;
                 case Model_iPAQ_H36xx:
                 case Model_iPAQ_H37xx:
                 case Model_iPAQ_H39xx:
 
                 default:
                         d-> m_rotation = Rot270;
                         break;
                 case Model_iPAQ_H5xxx:
                         d-> m_rotation = Rot0;
                 }
 
         f. setName ( "/etc/familiar-version" );
         if ( f. open ( IO_ReadOnly )) {
                 d-> m_systemstr = "Familiar";
                 d-> m_system = System_Familiar;
 
                 QTextStream ts ( &f );
                 d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
                 f. close ( );
         } else {
             f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
                     d-> m_systemstr = "OpenEmbedded/iPaq";
                 d-> m_system = System_Familiar;
 
                     QTextStream ts ( &f );
                     ts.setDevice ( &f );
                     d-> m_sysverstr = ts. readLine ( );
                     f. close ( );
         }
     }
 
 
 
 
 
         m_leds [0] = m_leds [1] = Led_Off;
 
         m_power_timer = 0;
 
 }
 
 void iPAQ::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         if ( isQWS( ) )
                 QWSServer::setKeyboardFilter ( this );
 
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                 i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
 
                 if (( ib-> model & d-> m_model ) == d-> m_model ) {
                         b. setKeycode ( ib-> code );
                         b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
 
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 
 //#include <linux/h3600_ts.h>  // including kernel headers is evil ...
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
         unsigned char mode;
         unsigned char pwr;
         unsigned char brightness;
 } FLITE_IN;
 
 #define LED_ON    OD_IOW( 'f', 5, LED_IN )
 #define FLITE_ON  OD_IOW( 'f', 7, FLITE_IN )
 
 
 QValueList <OLed> iPAQ::ledList ( ) const
 {
         QValueList <OLed> vl;
         vl << Led_Power;
 
         if ( d-> m_model == Model_iPAQ_H38xx )
                 vl << Led_BlueTooth;
         return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
         QValueList <OLedState> vl;
 
         if ( l == Led_Power )
                 vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
         else if ( l == Led_BlueTooth && d-> m_model == Model_iPAQ_H38xx )
                 vl << Led_Off; // << Led_On << ???
 
         return vl;
 }
 
 OLedState iPAQ::ledState ( OLed l ) const
 {
         switch ( l ) {
                 case Led_Power:
                         return m_leds [0];
                 case Led_BlueTooth:
                         return m_leds [1];
                 default:
                         return Led_Off;
         }
 }
 
 bool iPAQ::setLedState ( OLed l, OLedState st )
 {
         static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK );
 
         if ( l == Led_Power ) {
                 if ( fd >= 0 ) {
                         LED_IN leds;
                         ::memset ( &leds, 0, sizeof( leds ));
                         leds. TotalTime  = 0;
                         leds. OnTime     = 0;
                         leds. OffTime    = 1;
                         leds. OffOnBlink = 2;
 
                         switch ( st ) {
                                 case Led_Off      : leds. OffOnBlink = 0; break;
                                 case Led_On       : leds. OffOnBlink = 1; break;
                                 case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
                                 case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
                         }
 
                         if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) {
                                 m_leds [0] = st;
                                 return true;
                         }
                 }
         }
         return false;
 }
 
 
 bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
         int newkeycode = keycode;
 
         switch ( keycode ) {
                 // H38xx/H39xx have no "Q" key anymore - this is now the Mail key
                 case HardKey_Menu: {
                         if (( d-> m_model == Model_iPAQ_H38xx ) ||
                             ( d-> m_model == Model_iPAQ_H39xx ) ||
                             ( d-> m_model == Model_iPAQ_H5xxx)) {
                                 newkeycode = HardKey_Mail;
                         }
                         break;
                 }
 
                 // Rotate cursor keys 180° or 270°
                 case Key_Left :
                 case Key_Right:
                 case Key_Up   :
                 case Key_Down : {
 
                         if (( d-> m_model == Model_iPAQ_H31xx ) ||
                             ( d-> m_model == Model_iPAQ_H38xx )) {
                                 newkeycode = Key_Left + ( keycode - Key_Left + 2 ) % 4;
                         }
                         // Rotate the cursor keys by 270°
                         // keycode - Key_Left = position of the button starting from left clockwise
                         // add the rotation to it and modolo. No we've the original offset
                         // add the offset to the Key_Left key
                         if ( d-> m_model == Model_iPAQ_H5xxx )
                                 newkeycode = Key_Left + ( keycode - Key_Left + 3 ) % 4;
                         break;
                 }
 
                 // map Power Button short/long press to F34/F35
                 case Key_SysReq: {
                         if ( isPress ) {
                                 if ( m_power_timer )
                                         killTimer ( m_power_timer );
                                 m_power_timer = startTimer ( 500 );
                         }
                         else if ( m_power_timer ) {
                                 killTimer ( m_power_timer );
                                 m_power_timer = 0;
                                 QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, true, false );
                                 QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, false, false );
                         }
                         newkeycode = Key_unknown;
                         break;
                 }
         }
 
         if ( newkeycode != keycode ) {
                 if ( newkeycode != Key_unknown )
                         QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat );
                 return true;
         }
         else
                 return false;
 }
 
 void iPAQ::timerEvent ( QTimerEvent * )
 {
         killTimer ( m_power_timer );
         m_power_timer = 0;
         QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
         QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void iPAQ::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
         static Sound snd ( "alarm" );
         int fd;
         int vol;
         bool vol_reset = false;
 
         if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
                 if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
                         Config cfg ( "qpe" );
                         cfg. setGroup ( "Volume" );
 
                         int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
                         if ( volalarm < 0 )
                                 volalarm = 0;
                         else if ( volalarm > 100 )
                                 volalarm = 100;
                         volalarm |= ( volalarm << 8 );
 
                         if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
                                 vol_reset = true;
                 }
         }
 
         snd. play ( );
         while ( !snd. isFinished ( ))
                 qApp-> processEvents ( );
 
         if ( fd >= 0 ) {
                 if ( vol_reset )
                         ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
                 ::close ( fd );
         }
 #endif
 }
@@ -1558,386 +1558,386 @@ int iPAQ::lightSensorResolution ( ) const
 
 // Check whether this device is the sharp zaurus..
 // FIXME This gets unnecessary complicated. We should think about splitting the Zaurus
 //       class up into individual classes. We need three classes
 //
 //       Zaurus-Collie (SA-model  w/ 320x240 lcd, for SL5500 and SL5000)
 //       Zaurus-Poodle (PXA-model w/ 320x240 lcd, for SL5600)
 //       Zaurus-Corgi  (PXA-model w/ 640x480 lcd, for C700, C750, C760, and C860)
 //
 //       Only question right now is: Do we really need to do it? Because as soon
 //       as the OpenZaurus kernel is ready, there will be a unified interface for all
 //       Zaurus models (concerning apm, backlight, buttons, etc.)
 //
 //       Comments? - mickeyl.
 
 bool Zaurus::isZaurus()
 {
 
         // If the special devices by embedix exist, it is quite simple: it is a Zaurus !
         if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ) ){
                 return true;
         }
 
         // On non-embedix kernels, we have to look closer.
         bool is_zaurus = false;
         QFile f ( "/proc/cpuinfo" );
         if ( f. open ( IO_ReadOnly ) ) {
                 QString model;
                 QFile f ( "/proc/cpuinfo" );
 
                 QTextStream ts ( &f );
                 QString line;
                 while( line = ts. readLine ( ) ) {
                         if ( line. left ( 8 ) == "Hardware" )
                                 break;
                 }
                 int loc = line. find ( ":" );
                 if ( loc != -1 )
                         model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
 
                 if ( model == "Sharp-Collie"
                      || model == "Collie"
                      || model == "SHARP Corgi"
                      || model == "SHARP Shepherd"
                      || model == "SHARP Poodle"
                      || model == "SHARP Husky"
                    )
                         is_zaurus = true;
 
           }
         return is_zaurus;
 }
 
 
 void Zaurus::init ( )
 {
         d-> m_vendorstr = "Sharp";
         d-> m_vendor = Vendor_Sharp;
         m_embedix = true;  // Not openzaurus means: It has an embedix kernel !
 
         // QFile f ( "/proc/filesystems" );
         QString model;
 
         // It isn't a good idea to check the system configuration to
         // detect the distribution !
         // Otherwise it may happen that any other distribution is detected as openzaurus, just
         // because it uses a jffs2 filesystem..
         // (eilers)
         // if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
         QFile f ("/etc/oz_version");
         if ( f.exists() ){
                 d-> m_vendorstr = "OpenZaurus Team";
                 d-> m_systemstr = "OpenZaurus";
                 d-> m_system = System_OpenZaurus;
 
                 if ( f. open ( IO_ReadOnly )) {
                         QTextStream ts ( &f );
                         d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
                         f. close ( );
                 }
 
                 // Openzaurus sometimes uses the embedix kernel!
                 // => Check whether this is an embedix kernel
                 FILE *uname = popen("uname -r", "r");
                 QString line;
                 if ( f.open(IO_ReadOnly, uname) ) {
                         QTextStream ts ( &f );
                         line = ts. readLine ( );
                         int loc = line. find ( "embedix" );
                         if ( loc != -1 )
                                 m_embedix = true;
                         else
                                 m_embedix = false;
                         f. close ( );
                 }
                 pclose(uname);
         }
         else {
                 d-> m_systemstr = "Zaurus";
                 d-> m_system = System_Zaurus;
         }
 
         f. setName ( "/proc/cpuinfo" );
         if ( f. open ( IO_ReadOnly ) ) {
                 QTextStream ts ( &f );
                 QString line;
                 while( line = ts. readLine ( ) ) {
                         if ( line. left ( 8 ) == "Hardware" )
                                 break;
                 }
                 int loc = line. find ( ":" );
                 if ( loc != -1 )
                         model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
         }
 
         if ( model == "SHARP Corgi" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C700";
         } else if ( model == "SHARP Shepherd" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C750";
         } else if ( model == "SHARP Husky" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C760";
         } else if ( model == "SHARP Poodle" ) {
                 d-> m_model = Model_Zaurus_SLB600;
                 d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
         } else if ( model == "Sharp-Collie" || model == "Collie" ) {
                 d-> m_model = Model_Zaurus_SL5500;
                 d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
         } else {
                 d-> m_model = Model_Zaurus_SL5500;
                 d-> m_modelstr = "Zaurus (Model unknown)";
         }
 
         bool flipstate = false;
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLA300:
                         d-> m_rotation = Rot0;
                         break;
                 case Model_Zaurus_SLC7x0:
                         d-> m_rotation = rotation();
                         d-> m_direction = direction();
                         break;
                 case Model_Zaurus_SLB600:
                 case Model_Zaurus_SL5500:
                 case Model_Zaurus_SL5000:
                 default:
                         d-> m_rotation = Rot270;
                         break;
         }
         m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         struct z_button * pz_buttons;
         int buttoncount;
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLC7x0:
                         pz_buttons = z_buttons_c700;
                         buttoncount = ARRAY_SIZE(z_buttons_c700);
                         break;
                 default:
                         pz_buttons = z_buttons;
                         buttoncount = ARRAY_SIZE(z_buttons);
                         break;
         }
 
         for ( int i = 0; i < buttoncount; i++ ) {
                 struct z_button *zb = pz_buttons + i;
                 ODeviceButton b;
 
                 b. setKeycode ( zb-> code );
                 b. setUserText ( QObject::tr ( "Button", zb-> utext ));
                 b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
                 b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ),
                                                                   zb-> fpressedaction ));
                 b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ),
                                                                zb-> fheldaction ));
 
                 d-> m_buttons-> append ( b );
         }
 
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )),
-                  this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)),
+                  this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
         #defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
         //#defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
         #defineSHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)
 
 #define  SHARP_IOCTL_GET_ROTATION 0x413c
 
 typedef struct sharp_led_status {
   int which;   /* select which LED status is wanted. */
   int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 #define SHARP_LED_MAIL_EXISTS  9       /* mail status (exists or not) */
 
 #define LED_MAIL_NO_UNREAD_MAIL  0   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_NEWMAIL_EXISTS  1   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_UNREAD_MAIL_EX  2   /* for SHARP_LED_MAIL_EXISTS */
 
 // #include <asm/sharp_apm.h> // including kernel headers is evil ...
 
 #define APM_IOCGEVTSRC          OD_IOR( 'A', 203, int )
 #define APM_IOCSEVTSRC          OD_IORW( 'A', 204, int )
 #define APM_EVT_POWER_BUTTON    (1 << 0)
 
 #define FL_IOCTL_STEP_CONTRAST    100
 
 
 void Zaurus::buzzer ( int sound )
 {
 #ifndef QT_NO_SOUND
         QString soundname;
 
         // Not all devices have real sound
         if ( d->m_model == Model_Zaurus_SLC7x0
              || d->m_model == Model_Zaurus_SLB600 ){
 
                 switch ( sound ){
                 case SHARP_BUZ_SCHEDULE_ALARM:
                         soundname = "alarm";
                         break;
                 case SHARP_BUZ_TOUCHSOUND:
                         soundname = "touchsound";
                         break;
                 case SHARP_BUZ_KEYSOUND:
                         soundname = "keysound";
                         break;
                 default:
                         soundname = "alarm";
 
                 }
         }
 
         // If a soundname is defined, we expect that this device has
         // sound capabilities.. Otherwise we expect to have the buzzer
         // device..
         if ( !soundname.isEmpty() ){
                 int fd;
                 int vol;
                 bool vol_reset = false;
 
                 Sound snd ( soundname );
 
                 if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
                         if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
                                 Config cfg ( "qpe" );
                                 cfg. setGroup ( "Volume" );
 
                                 int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
                                 if ( volalarm < 0 )
                                         volalarm = 0;
                                 else if ( volalarm > 100 )
                                         volalarm = 100;
                                 volalarm |= ( volalarm << 8 );
 
                                 if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
                                         vol_reset = true;
                         }
                 }
 
                 snd. play ( );
                 while ( !snd. isFinished ( ))
                         qApp-> processEvents ( );
 
                 if ( fd >= 0 ) {
                         if ( vol_reset )
                                 ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
                         ::close ( fd );
                 }
         } else {
                 int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK );
 
                 if ( fd >= 0 ) {
                         ::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
                         ::close ( fd );
                 }
 
         }
 #endif
 }
 
 
 void Zaurus::alarmSound ( )
 {
         buzzer ( SHARP_BUZ_SCHEDULE_ALARM );
 }
 
 void Zaurus::touchSound ( )
 {
         buzzer ( SHARP_BUZ_TOUCHSOUND );
 }
 
 void Zaurus::keySound ( )
 {
         buzzer ( SHARP_BUZ_KEYSOUND );
 }
 
 
 QValueList <OLed> Zaurus::ledList ( ) const
 {
         QValueList <OLed> vl;
         vl << Led_Mail;
         return vl;
 }
 
 QValueList <OLedState> Zaurus::ledStateList ( OLed l ) const
 {
         QValueList <OLedState> vl;
 
         if ( l == Led_Mail )
                 vl << Led_Off << Led_On << Led_BlinkSlow;
         return vl;
 }
 
 OLedState Zaurus::ledState ( OLed which ) const
 {
         if ( which == Led_Mail )
                 return m_leds [0];
         else
                 return Led_Off;
 }
 
 bool Zaurus::setLedState ( OLed which, OLedState st )
 {
         if (!m_embedix) // Currently not supported on non_embedix kernels
                 return false;
 
         static int fd = ::open ( "/dev/sharp_led", O_RDWR|O_NONBLOCK );
 
@@ -2109,385 +2109,385 @@ Transformation Zaurus::rotation ( ) const
                 case Model_Zaurus_SLB600:
                 case Model_Zaurus_SL5500:
                 case Model_Zaurus_SL5000:
                 default:
                         rot = d-> m_rotation;
                         break;
         }
 
         return rot;
 }
 ODirection Zaurus::direction ( ) const
 {
         ODirection dir;
         int handle = 0;
         int retval = 0;
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLC7x0:
                         handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK);
                         if (handle == -1) {
                                 dir = CW;
                         } else {
                                 retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION);
                                 ::close (handle);
                                 if (retval == 2 )
                                         dir = CCW;
                                 else
                                         dir = CW;
                         }
                         break;
                 case Model_Zaurus_SLA300:
                 case Model_Zaurus_SLB600:
                 case Model_Zaurus_SL5500:
                 case Model_Zaurus_SL5000:
                 default:
                         dir = d-> m_direction;
                         break;
         }
         return dir;
 
 }
 
 int Zaurus::displayBrightnessResolution ( ) const
 {
         if (m_embedix)
                 return d->m_model == Model_Zaurus_SLC7x0 ? 18 : 5;
         else
                 return 256;
 }
 
 bool Zaurus::hasHingeSensor() const
 {
     return d->m_model == Model_Zaurus_SLC7x0;
 }
 
 OHingeStatus Zaurus::readHingeSensor()
 {
     int handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK);
     if (handle == -1)
     {
         qWarning("Zaurus::readHingeSensor() - failed (%s)", "unknown reason" ); //FIXME: use strerror
         return CASE_UNKNOWN;
     }
     else
     {
         int retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION);
         ::close (handle);
         if ( retval == CASE_CLOSED || retval == CASE_PORTRAIT || retval == CASE_LANDSCAPE )
         {
             qDebug( "Zaurus::readHingeSensor() - result = %d", retval );
             return static_cast<OHingeStatus>( retval );
         }
         else
         {
             qWarning("Zaurus::readHingeSensor() - couldn't compute hinge status!" );
             return CASE_UNKNOWN;
         }
     }
 }
 
 
 void Zaurus::virtual_hook( int id, void *data ) {
     switch( id ) {
     case VIRTUAL_ROTATION:{
         VirtRotation* rot = reinterpret_cast<VirtRotation*>( data );
         rot->trans = rotation();
         break;
     }
     case VIRTUAL_DIRECTION:{
         VirtDirection *dir = reinterpret_cast<VirtDirection*>( data );
         dir->direct = direction();
         break;
     }
     case VIRTUAL_HAS_HINGE:{
         VirtHasHinge *hin = reinterpret_cast<VirtHasHinge*>( data );
         hin->hasHinge = hasHingeSensor();
         break;
     }
     case VIRTUAL_HINGE:{
         VirtHingeStatus *hin = reinterpret_cast<VirtHingeStatus*>( data );
         hin->hingeStat = readHingeSensor();
         break;
     }
     default:
         ODevice::virtual_hook( id, data );
         break;
     }
 }
 
 /**************************************************
  *
  * SIMpad
  *
  **************************************************/
 
 void SIMpad::init ( )
 {
         d-> m_vendorstr = "SIEMENS";
         d-> m_vendor = Vendor_SIEMENS;
 
         QFile f ( "/proc/hal/model" );
 
     //TODO Implement model checking
     //FIXME For now we assume an SL4
 
     d-> m_modelstr = "SL4";
     d-> m_model = Model_SIMpad_SL4;
 
         switch ( d-> m_model ) {
                 default:
                         d-> m_rotation = Rot0;
                         d-> m_direction = CCW;
                         d-> m_holdtime = 1000; // 1000ms
 
                         break;
         }
 
         f. setName ( "/etc/familiar-version" );
         if ( f. open ( IO_ReadOnly )) {
                 d-> m_systemstr = "Familiar";
                 d-> m_system = System_Familiar;
 
                 QTextStream ts ( &f );
                 d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
                 f. close ( );
         } else {
             f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
                     d-> m_systemstr = "OpenEmbedded/SIMpad";
                 d-> m_system = System_OpenZaurus;
 
                     QTextStream ts ( &f );
                     ts.setDevice ( &f );
                     d-> m_sysverstr = ts. readLine ( );
                     f. close ( );
         }
     }
 
         m_leds [0] = m_leds [1] = Led_Off;
 
         m_power_timer = 0;
 
 }
 
 void SIMpad::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         if ( isQWS( ) )
                 QWSServer::setKeyboardFilter ( this );
 
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
                 s_button *sb = simpad_buttons + i;
                 ODeviceButton b;
 
                 if (( sb-> model & d-> m_model ) == d-> m_model ) {
                         b. setKeycode ( sb-> code );
                         b. setUserText ( QObject::tr ( "Button", sb-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( sb-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction ));
 
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
 #define SIMPAD_BACKLIGHT_MASK    0x00a10044
 
 QValueList <OLed> SIMpad::ledList ( ) const
 {
         QValueList <OLed> vl;
         vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
         //vl << Led_Mail; //TODO find out if LED1 is accessible anyway
         return vl;
 }
 
 QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 {
         QValueList <OLedState> vl;
 
         if ( l == Led_Power )  //FIXME which LED is LED2 ? The green one or the amber one?
                 vl << Led_Off << Led_On;
         //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
                 //vl << Led_Off;
         return vl;
 }
 
 OLedState SIMpad::ledState ( OLed l ) const
 {
         switch ( l ) {
                 case Led_Power:
                         return m_leds [0];
                 //case Led_Mail:
                         //return m_leds [1];
                 default:
                         return Led_Off;
         }
 }
 
 bool SIMpad::setLedState ( OLed l, OLedState st )
 {
         static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK );
 
         if ( l == Led_Power ) {
                 if ( fd >= 0 ) {
                         LED_IN leds;
                         ::memset ( &leds, 0, sizeof( leds ));
                         leds. TotalTime  = 0;
                         leds. OnTime     = 0;
                         leds. OffTime    = 1;
                         leds. OffOnBlink = 2;
 
                         switch ( st ) {
                                 case Led_Off      : leds. OffOnBlink = 0; break;
                                 case Led_On       : leds. OffOnBlink = 1; break;
                                 case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
                                 case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
                         }
 
                         {
             /*TODO Implement this like that:
                read from cs3
                && with SIMPAD_LED2_ON
                write to cs3 */
                                 m_leds [0] = st;
                                 return true;
                         }
                 }
         }
         return false;
 }
 
 
 bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
         //TODO
         return false;
 }
 
 void SIMpad::timerEvent ( QTimerEvent * )
 {
         killTimer ( m_power_timer );
         m_power_timer = 0;
         QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
         QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void SIMpad::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
         static Sound snd ( "alarm" );
         int fd;
         int vol;
         bool vol_reset = false;
 
         if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
                 if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
                         Config cfg ( "qpe" );
                         cfg. setGroup ( "Volume" );
 
                         int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
                         if ( volalarm < 0 )
                                 volalarm = 0;
                         else if ( volalarm > 100 )
                                 volalarm = 100;
                         volalarm |= ( volalarm << 8 );
 
                         if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
                                 vol_reset = true;
                 }
         }
 
         snd. play ( );
         while ( !snd. isFinished ( ))
                 qApp-> processEvents ( );
 
         if ( fd >= 0 ) {
                 if ( vol_reset )
                         ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
                 ::close ( fd );
         }
 #endif
 }
 
 
 bool SIMpad::suspend ( ) // Must override because SIMpad does NOT have apm
 {
         qDebug( "ODevice for SIMpad: suspend()" );
         if ( !isQWS( ) ) // only qwsserver is allowed to suspend
                 return false;
 
         bool res = false;
 
         struct timeval tvs, tvn;
         ::gettimeofday ( &tvs, 0 );
 
         ::sync ( ); // flush fs caches
         res = ( ::system ( "cat /dev/fb/0 >/tmp/.buffer; echo > /proc/sys/pm/suspend; cat /tmp/.buffer >/dev/fb/0" ) == 0 ); //TODO make better :)
 
         return res;
 }
 
 
 bool SIMpad::setSoftSuspend ( bool soft )
 {
         qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" );
         return false;
 }
 
 
 bool SIMpad::setDisplayStatus ( bool on )
 {
         qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" );
 
         bool res = false;
         int fd;
 
         QString cmdline = QString().sprintf( "echo %s > /proc/cs3", on ? "0xd41a" : "0xd40a" ); //TODO make better :)
 
         res = ( ::system( (const char*) cmdline ) == 0 );
 
         return res;
 }
 
 
 bool SIMpad::setDisplayBrightness ( int bright )
 {
         qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright );
         bool res = false;
         int fd;
 
         if ( bright > 255 )
                 bright = 255;
         if ( bright < 1 )
@@ -2609,238 +2609,238 @@ bool Ramses::setSoftSuspend(bool soft)
                                 perror("APM_IOCGEVTSRC");
                 }
                 else
                         perror("APM_IOCGEVTSRC");
 
                 ::close(fd);
         }
         else
                 perror("/dev/apm_bios or /dev/misc/apm_bios");
 
     return res;
 #else
     return true;
 #endif
 }
 
 bool Ramses::suspend ( )
 {
         qDebug("Ramses::suspend");
         return false;
 }
 
 /**
  * This sets the display on or off
  */
 bool Ramses::setDisplayStatus(bool on)
 {
         qDebug("Ramses::setDisplayStatus(%d)", on);
 #if 0
         bool res = false;
         int fd;
 
         if ((fd = ::open ("/dev/fb/0", O_RDWR)) >= 0) {
                 res = (::ioctl(fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN) == 0);
                 ::close(fd);
         }
         return res;
 #else
         return true;
 #endif
 }
 
 
 /*
  * We get something between 0..255 into us
 */
 bool Ramses::setDisplayBrightness(int bright)
 {
         qDebug("Ramses::setDisplayBrightness(%d)", bright);
         bool res = false;
         int fd;
 
         // pwm1 brighness: 20 steps 500..0 (dunkel->hell)
 
         if (bright > 255 )
                 bright = 255;
         if (bright < 0)
                 bright = 0;
 
         // Turn backlight completely off
         if ((fd = ::open("/proc/sys/board/lcd_backlight", O_WRONLY)) >= 0) {
                 char writeCommand[10];
                 const int count = sprintf(writeCommand, "%d\n", bright ? 1 : 0);
                 res = (::write(fd, writeCommand, count) != -1);
                 ::close(fd);
         }
 
         // scale backlight brightness to hardware
         bright = 500-(bright * 500 / 255);
         if ((fd = ::open("/proc/sys/board/pwm1", O_WRONLY)) >= 0) {
                 qDebug(" %d -> pwm1", bright);
                 char writeCommand[100];
                 const int count = sprintf(writeCommand, "%d\n", bright);
                 res = (::write(fd, writeCommand, count) != -1);
                 ::close(fd);
         }
         return res;
 }
 
 
 int Ramses::displayBrightnessResolution() const
 {
         return 32;
 }
 
 bool Ramses::setDisplayContrast(int contr)
 {
         qDebug("Ramses::setDisplayContrast(%d)", contr);
         bool res = false;
         int fd;
 
         // pwm0 contrast: 20 steps 79..90 (dunkel->hell)
 
         if (contr > 255 )
                 contr = 255;
         if (contr < 0)
                 contr = 0;
         contr = 90 - (contr * 20 / 255);
 
         if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) {
                 qDebug(" %d -> pwm0", contr);
                 char writeCommand[100];
                 const int count = sprintf(writeCommand, "%d\n", contr);
                 res = (::write(fd, writeCommand, count) != -1);
                 res = true;
                 ::close(fd);
         }
         return res;
 }
 
 
 int Ramses::displayContrastResolution() const
 {
         return 20;
 }
 
 
 /**************************************************
  *                                                *
  * Jornada                                        *
  *                                                *
  **************************************************/
 
 
 bool Jornada::isJornada ( )
 {
   QFile f( "/proc/cpuinfo" );
   if ( f. open ( IO_ReadOnly ) ) {
     QTextStream ts ( &f );
     QString line;
     while( line = ts. readLine ( ) ) {
       if ( line. left ( 8 ) == "Hardware" ) {
         int loc = line. find ( ":" );
         if ( loc != -1 ) {
           QString model =
             line. mid ( loc + 2 ). simplifyWhiteSpace( );
           return ( model == "HP Jornada 56x" );
         }
       }
     }
   }
   return false;
 }
 
 void Jornada::init ( )
 {
         d-> m_vendorstr = "HP";
         d-> m_vendor = Vendor_HP;
         d-> m_modelstr = "Jornada 56x";
         d-> m_model = Model_Jornada_56x;
         d-> m_systemstr = "Familiar";
         d-> m_system = System_Familiar;
         d-> m_rotation = Rot0;
 
         QFile f ( "/etc/familiar-version" );
         f. setName ( "/etc/familiar-version" );
         if ( f. open ( IO_ReadOnly )) {
 
                 QTextStream ts ( &f );
                 d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
                 f. close ( );
         }
 }
 
 #if 0
 void Jornada::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         // Simulation uses iPAQ 3660 device buttons
 
         qDebug ( "init Buttons" );
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                 i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
 
                 if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {
                         b. setKeycode ( ib-> code );
                         b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 #endif
 int Jornada::displayBrightnessResolution ( ) const
 {
 }
 
 bool Jornada::setDisplayBrightness ( int bright )
 {
         bool res = false;
         int fd;
 
         if ( bright > 255 )
                 bright = 255;
         if ( bright < 0 )
                 bright = 0;
 
         if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
                 FLITE_IN bl;
                 bl. mode = 1;
                 bl. pwr = bright ? 1 : 0;
                 bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
                 res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
                 ::close ( fd );
         }
         return res;
 }
 
 bool Jornada::setSoftSuspend ( bool soft )
 {
         bool res = false;
         int fd;
 
         if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
                 if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
                         res = true;
                 else
                         ::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 
                 ::close ( fd );
         }
         else
                 ::perror ( "/proc/sys/ts/suspend_button_mode" );
 
         return res;
 }