1 files changed, 8 insertions, 8 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index c0b6efa..4258d60 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -439,193 +439,193 @@ static QCString makeChannel ( const char *str )
 static inline bool isQWS()
 {
         return qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 }
 
 ODevice *ODevice::inst ( )
 {
         static ODevice *dev = 0;
 
         if ( !dev ) {
                 if ( QFile::exists ( "/proc/hal/model" ))
                         dev = new iPAQ ( );
                 else if ( Zaurus::isZaurus() )
                         dev = new Zaurus ( );
                 else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/cs3" ))
                         dev = new SIMpad ( );
                 else if ( QFile::exists ( "/proc/sys/board/name" ))
                         dev = new Ramses ( );
                 else if ( Yopy::isYopy() )
                         dev = new Yopy ( );
                 else if ( Jornada::isJornada() )
                         dev = new Jornada ( );
                 else
                         dev = new ODevice ( );
                 dev-> init ( );
         }
         return dev;
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
         d = new ODeviceData;
 
         d-> m_modelstr = "Unknown";
         d-> m_model = Model_Unknown;
         d-> m_vendorstr = "Unknown";
         d-> m_vendor = Vendor_Unknown;
         d-> m_systemstr = "Unknown";
         d-> m_system = System_Unknown;
         d-> m_sysverstr = "0.0";
         d-> m_rotation = Rot0;
         d-> m_direction = CW;
 
         d-> m_holdtime = 1000; // 1000ms
         d-> m_buttons = 0;
         d-> m_cpu_frequencies = new QStrList;
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
         if ( msg == "deviceButtonMappingChanged()" ) {
                 reloadButtonMapping ( );
         }
 }
 
 void ODevice::init ( )
 {
 }
 
 /**
  * This method initialises the  button mapping
  */
 void ODevice::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         // Simulation uses iPAQ 3660 device buttons
 
         qDebug ( "init Buttons" );
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                 i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
 
                 if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {
                         b. setKeycode ( ib-> code );
                         b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 ODevice::~ODevice ( )
 {
 // we leak m_devicebuttons and m_cpu_frequency
 // but it's a singleton and it is not so importantant
 // -zecke
         delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
         return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 /**
  * This method will try to suspend the device
  * It only works if the user is the QWS Server and the apm application
  * is installed.
  * It tries to suspend and then waits some time cause some distributions
  * do have asynchronus apm implementations.
  * This method will either fail and return false or it'll suspend the
  * device and return once the device got woken up
  *
  * @return if the device got suspended
  */
 bool ODevice::suspend ( )
 {
         qDebug("ODevice::suspend");
         if ( !isQWS( ) ) // only qwsserver is allowed to suspend
                 return false;
 
         if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
                 return false;
 
         bool res = false;
 
         struct timeval tvs, tvn;
         ::gettimeofday ( &tvs, 0 );
 
         ::sync ( ); // flush fs caches
         res = ( ::system ( "apm --suspend" ) == 0 );
 
         // This is needed because the iPAQ apm implementation is asynchronous and we
         // can not be sure when exactly the device is really suspended
         // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
         if ( res ) {
                 do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
                         ::usleep ( 200 * 1000 );
                         ::gettimeofday ( &tvn, 0 );
                 } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
         }
 
         return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 /**
  * This sets the display on or off
  */
 bool ODevice::setDisplayStatus ( bool on )
 {
         qDebug("ODevice::setDisplayStatus(%d)", on);
 
         if ( d-> m_model == Model_Unknown )
                 return false;
 
         bool res = false;
         int fd;
 
         if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
                 res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
                 ::close ( fd );
         }
         return res;
 }
 
 /**
  * This sets the display brightness
  *
  * @param p The brightness to be set on a scale from 0 to 255
  * @return success or failure
@@ -1019,342 +1019,342 @@ void ODevice::virtual_hook(int id, void* data){
     switch( id ) {
     case VIRTUAL_ROTATION:{
         VirtRotation* rot = reinterpret_cast<VirtRotation*>( data );
         rot->trans = d->m_rotation;
         break;
     }
     case VIRTUAL_DIRECTION:{
         VirtDirection *dir = reinterpret_cast<VirtDirection*>( data );
         dir->direct = d->m_direction;
         break;
     }
     case VIRTUAL_HAS_HINGE:{
         VirtHasHinge *hin = reinterpret_cast<VirtHasHinge*>( data );
         hin->hasHinge = false;
         break;
     }
     case VIRTUAL_HINGE:{
         VirtHingeStatus *hin = reinterpret_cast<VirtHingeStatus*>( data );
         hin->hingeStat = CASE_UNKNOWN;
         break;
     }
     }
 }
 
 /**************************************************
  *
  * Yopy 3500/3700
  *
  **************************************************/
 
 bool Yopy::isYopy ( )
 {
   QFile f( "/proc/cpuinfo" );
   if ( f. open ( IO_ReadOnly ) ) {
     QTextStream ts ( &f );
     QString line;
     while( line = ts. readLine ( ) ) {
       if ( line. left ( 8 ) == "Hardware" ) {
         int loc = line. find ( ":" );
         if ( loc != -1 ) {
           QString model =
             line. mid ( loc + 2 ). simplifyWhiteSpace( );
           return ( model == "Yopy" );
         }
       }
     }
   }
   return false;
 }
 
 void Yopy::init ( )
 {
   d-> m_vendorstr = "G.Mate";
   d-> m_vendor = Vendor_GMate;
   d-> m_modelstr = "Yopy3700";
   d-> m_model = Model_Yopy_3700;
   d-> m_rotation = Rot0;
 
   d-> m_systemstr = "Linupy";
   d-> m_system = System_Linupy;
 
   QFile f ( "/etc/issue" );
   if ( f. open ( IO_ReadOnly )) {
     QTextStream ts ( &f );
     ts.readLine();
     d-> m_sysverstr = ts. readLine ( );
     f. close ( );
   }
 }
 
 void Yopy::initButtons ( )
 {
   if ( d-> m_buttons )
     return;
 
   d-> m_buttons = new QValueList <ODeviceButton>;
 
   for (uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof(yopy_button)); i++) {
 
     yopy_button *ib = yopy_buttons + i;
 
     ODeviceButton b;
 
     b. setKeycode ( ib-> code );
     b. setUserText ( QObject::tr ( "Button", ib-> utext ));
     b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
     b. setFactoryPresetPressedAction
       (OQCopMessage(makeChannel(ib->fpressedservice), ib->fpressedaction));
     b. setFactoryPresetHeldAction
       (OQCopMessage(makeChannel(ib->fheldservice), ib->fheldaction));
 
     d-> m_buttons-> append ( b );
   }
   reloadButtonMapping ( );
 
   QCopChannel *sysch = new QCopChannel("QPE/System", this);
-  connect(sysch, SIGNAL(received(const QCString &, const QByteArray & )),
-          this, SLOT(systemMessage(const QCString &, const QByteArray & )));
+  connect(sysch, SIGNAL(received(const QCString&,const QByteArray&)),
+          this, SLOT(systemMessage(const QCString&,const QByteArray&)));
 }
 
 bool Yopy::suspend()
 {
   /* Opie for Yopy does not implement its own power management at the
      moment.  The public version runs parallel to X, and relies on the
      existing power management features. */
   return false;
 }
 
 bool Yopy::setDisplayBrightness(int bright)
 {
   /* The code here works, but is disabled as the current version runs
      parallel to X, and relies on the existing backlight demon. */
 #if 0
   if ( QFile::exists("/proc/sys/pm/light") ) {
     int fd = ::open("/proc/sys/pm/light", O_WRONLY);
     if (fd >= 0 ) {
       if (bright)
         ::write(fd, "1\n", 2);
       else
         ::write(fd, "0\n", 2);
       ::close(fd);
       return true;
     }
   }
 #endif
   return false;
 }
 
 int Yopy::displayBrightnessResolution() const
 {
   return 2;
 }
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
         d-> m_vendorstr = "HP";
         d-> m_vendor = Vendor_HP;
 
         QFile f ( "/proc/hal/model" );
 
         if ( f. open ( IO_ReadOnly )) {
                 QTextStream ts ( &f );
 
                 d-> m_modelstr = "H" + ts. readLine ( );
 
                 if ( d-> m_modelstr == "H3100" )
                         d-> m_model = Model_iPAQ_H31xx;
                 else if ( d-> m_modelstr == "H3600" )
                         d-> m_model = Model_iPAQ_H36xx;
                 else if ( d-> m_modelstr == "H3700" )
                         d-> m_model = Model_iPAQ_H37xx;
                 else if ( d-> m_modelstr == "H3800" )
                         d-> m_model = Model_iPAQ_H38xx;
                 else if ( d-> m_modelstr == "H3900" )
                         d-> m_model = Model_iPAQ_H39xx;
                 else if ( d-> m_modelstr == "H5400" )
                         d-> m_model = Model_iPAQ_H5xxx;
                 else
                         d-> m_model = Model_Unknown;
 
                 f. close ( );
         }
 
         switch ( d-> m_model ) {
                 case Model_iPAQ_H31xx:
                 case Model_iPAQ_H38xx:
                         d-> m_rotation = Rot90;
                         break;
                 case Model_iPAQ_H36xx:
                 case Model_iPAQ_H37xx:
                 case Model_iPAQ_H39xx:
 
                 default:
                         d-> m_rotation = Rot270;
                         break;
                 case Model_iPAQ_H5xxx:
                         d-> m_rotation = Rot0;
                 }
 
         f. setName ( "/etc/familiar-version" );
         if ( f. open ( IO_ReadOnly )) {
                 d-> m_systemstr = "Familiar";
                 d-> m_system = System_Familiar;
 
                 QTextStream ts ( &f );
                 d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
                 f. close ( );
         } else {
             f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
                     d-> m_systemstr = "OpenEmbedded/iPaq";
                 d-> m_system = System_Familiar;
 
                     QTextStream ts ( &f );
                     ts.setDevice ( &f );
                     d-> m_sysverstr = ts. readLine ( );
                     f. close ( );
         }
     }
 
 
 
 
 
         m_leds [0] = m_leds [1] = Led_Off;
 
         m_power_timer = 0;
 
 }
 
 void iPAQ::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         if ( isQWS( ) )
                 QWSServer::setKeyboardFilter ( this );
 
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                 i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
 
                 if (( ib-> model & d-> m_model ) == d-> m_model ) {
                         b. setKeycode ( ib-> code );
                         b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
 
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 
 //#include <linux/h3600_ts.h>  // including kernel headers is evil ...
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
         unsigned char mode;
         unsigned char pwr;
         unsigned char brightness;
 } FLITE_IN;
 
 #define LED_ON    OD_IOW( 'f', 5, LED_IN )
 #define FLITE_ON  OD_IOW( 'f', 7, FLITE_IN )
 
 
 QValueList <OLed> iPAQ::ledList ( ) const
 {
         QValueList <OLed> vl;
         vl << Led_Power;
 
         if ( d-> m_model == Model_iPAQ_H38xx )
                 vl << Led_BlueTooth;
         return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
         QValueList <OLedState> vl;
 
         if ( l == Led_Power )
                 vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
         else if ( l == Led_BlueTooth && d-> m_model == Model_iPAQ_H38xx )
                 vl << Led_Off; // << Led_On << ???
 
         return vl;
 }
 
 OLedState iPAQ::ledState ( OLed l ) const
 {
         switch ( l ) {
                 case Led_Power:
                         return m_leds [0];
                 case Led_BlueTooth:
                         return m_leds [1];
                 default:
                         return Led_Off;
         }
 }
 
 bool iPAQ::setLedState ( OLed l, OLedState st )
 {
         static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK );
 
         if ( l == Led_Power ) {
                 if ( fd >= 0 ) {
                         LED_IN leds;
                         ::memset ( &leds, 0, sizeof( leds ));
                         leds. TotalTime  = 0;
                         leds. OnTime     = 0;
                         leds. OffTime    = 1;
                         leds. OffOnBlink = 2;
 
                         switch ( st ) {
                                 case Led_Off      : leds. OffOnBlink = 0; break;
                                 case Led_On       : leds. OffOnBlink = 1; break;
                                 case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
                                 case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
                         }
 
                         if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) {
                                 m_leds [0] = st;
                                 return true;
                         }
                 }
         }
         return false;
 }
 
 
 bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
         int newkeycode = keycode;
 
         switch ( keycode ) {
                 // H38xx/H39xx have no "Q" key anymore - this is now the Mail key
                 case HardKey_Menu: {
                         if (( d-> m_model == Model_iPAQ_H38xx ) ||
                             ( d-> m_model == Model_iPAQ_H39xx ) ||
                             ( d-> m_model == Model_iPAQ_H5xxx)) {
@@ -1654,194 +1654,194 @@ void Zaurus::init ( )
         }
         else {
                 d-> m_systemstr = "Zaurus";
                 d-> m_system = System_Zaurus;
         }
 
         f. setName ( "/proc/cpuinfo" );
         if ( f. open ( IO_ReadOnly ) ) {
                 QTextStream ts ( &f );
                 QString line;
                 while( line = ts. readLine ( ) ) {
                         if ( line. left ( 8 ) == "Hardware" )
                                 break;
                 }
                 int loc = line. find ( ":" );
                 if ( loc != -1 )
                         model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
         }
 
         if ( model == "SHARP Corgi" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C700";
         } else if ( model == "SHARP Shepherd" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C750";
         } else if ( model == "SHARP Husky" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C760";
         } else if ( model == "SHARP Poodle" ) {
                 d-> m_model = Model_Zaurus_SLB600;
                 d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
         } else if ( model == "Sharp-Collie" || model == "Collie" ) {
                 d-> m_model = Model_Zaurus_SL5500;
                 d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
         } else {
                 d-> m_model = Model_Zaurus_SL5500;
                 d-> m_modelstr = "Zaurus (Model unknown)";
         }
 
         bool flipstate = false;
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLA300:
                         d-> m_rotation = Rot0;
                         break;
                 case Model_Zaurus_SLC7x0:
                         d-> m_rotation = rotation();
                         d-> m_direction = direction();
                         break;
                 case Model_Zaurus_SLB600:
                 case Model_Zaurus_SL5500:
                 case Model_Zaurus_SL5000:
                 default:
                         d-> m_rotation = Rot270;
                         break;
         }
         m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         struct z_button * pz_buttons;
         int buttoncount;
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLC7x0:
                         pz_buttons = z_buttons_c700;
                         buttoncount = ARRAY_SIZE(z_buttons_c700);
                         break;
                 default:
                         pz_buttons = z_buttons;
                         buttoncount = ARRAY_SIZE(z_buttons);
                         break;
         }
 
         for ( int i = 0; i < buttoncount; i++ ) {
                 struct z_button *zb = pz_buttons + i;
                 ODeviceButton b;
 
                 b. setKeycode ( zb-> code );
                 b. setUserText ( QObject::tr ( "Button", zb-> utext ));
                 b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
                 b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ),
                                                                   zb-> fpressedaction ));
                 b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ),
                                                                zb-> fheldaction ));
 
                 d-> m_buttons-> append ( b );
         }
 
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )),
-                  this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)),
+                  this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
         #defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
         //#defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
         #defineSHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)
 
 #define  SHARP_IOCTL_GET_ROTATION 0x413c
 
 typedef struct sharp_led_status {
   int which;   /* select which LED status is wanted. */
   int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 #define SHARP_LED_MAIL_EXISTS  9       /* mail status (exists or not) */
 
 #define LED_MAIL_NO_UNREAD_MAIL  0   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_NEWMAIL_EXISTS  1   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_UNREAD_MAIL_EX  2   /* for SHARP_LED_MAIL_EXISTS */
 
 // #include <asm/sharp_apm.h> // including kernel headers is evil ...
 
 #define APM_IOCGEVTSRC          OD_IOR( 'A', 203, int )
 #define APM_IOCSEVTSRC          OD_IORW( 'A', 204, int )
 #define APM_EVT_POWER_BUTTON    (1 << 0)
 
 #define FL_IOCTL_STEP_CONTRAST    100
 
 
 void Zaurus::buzzer ( int sound )
 {
 #ifndef QT_NO_SOUND
         QString soundname;
 
         // Not all devices have real sound
         if ( d->m_model == Model_Zaurus_SLC7x0
              || d->m_model == Model_Zaurus_SLB600 ){
 
                 switch ( sound ){
                 case SHARP_BUZ_SCHEDULE_ALARM:
                         soundname = "alarm";
                         break;
                 case SHARP_BUZ_TOUCHSOUND:
                         soundname = "touchsound";
                         break;
                 case SHARP_BUZ_KEYSOUND:
                         soundname = "keysound";
                         break;
                 default:
                         soundname = "alarm";
 
                 }
         }
 
@@ -2205,193 +2205,193 @@ void Zaurus::virtual_hook( int id, void *data ) {
     }
     case VIRTUAL_HINGE:{
         VirtHingeStatus *hin = reinterpret_cast<VirtHingeStatus*>( data );
         hin->hingeStat = readHingeSensor();
         break;
     }
     default:
         ODevice::virtual_hook( id, data );
         break;
     }
 }
 
 /**************************************************
  *
  * SIMpad
  *
  **************************************************/
 
 void SIMpad::init ( )
 {
         d-> m_vendorstr = "SIEMENS";
         d-> m_vendor = Vendor_SIEMENS;
 
         QFile f ( "/proc/hal/model" );
 
     //TODO Implement model checking
     //FIXME For now we assume an SL4
 
     d-> m_modelstr = "SL4";
     d-> m_model = Model_SIMpad_SL4;
 
         switch ( d-> m_model ) {
                 default:
                         d-> m_rotation = Rot0;
                         d-> m_direction = CCW;
                         d-> m_holdtime = 1000; // 1000ms
 
                         break;
         }
 
         f. setName ( "/etc/familiar-version" );
         if ( f. open ( IO_ReadOnly )) {
                 d-> m_systemstr = "Familiar";
                 d-> m_system = System_Familiar;
 
                 QTextStream ts ( &f );
                 d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
                 f. close ( );
         } else {
             f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
                     d-> m_systemstr = "OpenEmbedded/SIMpad";
                 d-> m_system = System_OpenZaurus;
 
                     QTextStream ts ( &f );
                     ts.setDevice ( &f );
                     d-> m_sysverstr = ts. readLine ( );
                     f. close ( );
         }
     }
 
         m_leds [0] = m_leds [1] = Led_Off;
 
         m_power_timer = 0;
 
 }
 
 void SIMpad::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         if ( isQWS( ) )
                 QWSServer::setKeyboardFilter ( this );
 
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
                 s_button *sb = simpad_buttons + i;
                 ODeviceButton b;
 
                 if (( sb-> model & d-> m_model ) == d-> m_model ) {
                         b. setKeycode ( sb-> code );
                         b. setUserText ( QObject::tr ( "Button", sb-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( sb-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction ));
 
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
 #define SIMPAD_BACKLIGHT_MASK    0x00a10044
 
 QValueList <OLed> SIMpad::ledList ( ) const
 {
         QValueList <OLed> vl;
         vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
         //vl << Led_Mail; //TODO find out if LED1 is accessible anyway
         return vl;
 }
 
 QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 {
         QValueList <OLedState> vl;
 
         if ( l == Led_Power )  //FIXME which LED is LED2 ? The green one or the amber one?
                 vl << Led_Off << Led_On;
         //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
                 //vl << Led_Off;
         return vl;
 }
 
 OLedState SIMpad::ledState ( OLed l ) const
 {
         switch ( l ) {
                 case Led_Power:
                         return m_leds [0];
                 //case Led_Mail:
                         //return m_leds [1];
                 default:
                         return Led_Off;
         }
 }
 
 bool SIMpad::setLedState ( OLed l, OLedState st )
 {
         static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK );
 
         if ( l == Led_Power ) {
                 if ( fd >= 0 ) {
                         LED_IN leds;
                         ::memset ( &leds, 0, sizeof( leds ));
                         leds. TotalTime  = 0;
                         leds. OnTime     = 0;
                         leds. OffTime    = 1;
                         leds. OffOnBlink = 2;
 
                         switch ( st ) {
                                 case Led_Off      : leds. OffOnBlink = 0; break;
                                 case Led_On       : leds. OffOnBlink = 1; break;
                                 case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
                                 case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
                         }
 
                         {
             /*TODO Implement this like that:
                read from cs3
                && with SIMPAD_LED2_ON
                write to cs3 */
                                 m_leds [0] = st;
                                 return true;
                         }
                 }
         }
         return false;
 }
 
 
 bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
         //TODO
         return false;
 }
 
@@ -2705,142 +2705,142 @@ bool Ramses::setDisplayContrast(int contr)
                 contr = 0;
         contr = 90 - (contr * 20 / 255);
 
         if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) {
                 qDebug(" %d -> pwm0", contr);
                 char writeCommand[100];
                 const int count = sprintf(writeCommand, "%d\n", contr);
                 res = (::write(fd, writeCommand, count) != -1);
                 res = true;
                 ::close(fd);
         }
         return res;
 }
 
 
 int Ramses::displayContrastResolution() const
 {
         return 20;
 }
 
 
 /**************************************************
  *                                                *
  * Jornada                                        *
  *                                                *
  **************************************************/
 
 
 bool Jornada::isJornada ( )
 {
   QFile f( "/proc/cpuinfo" );
   if ( f. open ( IO_ReadOnly ) ) {
     QTextStream ts ( &f );
     QString line;
     while( line = ts. readLine ( ) ) {
       if ( line. left ( 8 ) == "Hardware" ) {
         int loc = line. find ( ":" );
         if ( loc != -1 ) {
           QString model =
             line. mid ( loc + 2 ). simplifyWhiteSpace( );
           return ( model == "HP Jornada 56x" );
         }
       }
     }
   }
   return false;
 }
 
 void Jornada::init ( )
 {
         d-> m_vendorstr = "HP";
         d-> m_vendor = Vendor_HP;
         d-> m_modelstr = "Jornada 56x";
         d-> m_model = Model_Jornada_56x;
         d-> m_systemstr = "Familiar";
         d-> m_system = System_Familiar;
         d-> m_rotation = Rot0;
 
         QFile f ( "/etc/familiar-version" );
         f. setName ( "/etc/familiar-version" );
         if ( f. open ( IO_ReadOnly )) {
 
                 QTextStream ts ( &f );
                 d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
                 f. close ( );
         }
 }
 
 #if 0
 void Jornada::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         // Simulation uses iPAQ 3660 device buttons
 
         qDebug ( "init Buttons" );
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                 i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
 
                 if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {
                         b. setKeycode ( ib-> code );
                         b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                         d-> m_buttons-> append ( b );
                 }
         }
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 #endif
 int Jornada::displayBrightnessResolution ( ) const
 {
 }
 
 bool Jornada::setDisplayBrightness ( int bright )
 {
         bool res = false;
         int fd;
 
         if ( bright > 255 )
                 bright = 255;
         if ( bright < 0 )
                 bright = 0;
 
         if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
                 FLITE_IN bl;
                 bl. mode = 1;
                 bl. pwr = bright ? 1 : 0;
                 bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
                 res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
                 ::close ( fd );
         }
         return res;
 }
 
 bool Jornada::setSoftSuspend ( bool soft )
 {
         bool res = false;
         int fd;
 
         if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
                 if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
                         res = true;
                 else
                         ::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 
                 ::close ( fd );
         }
         else
                 ::perror ( "/proc/sys/ts/suspend_button_mode" );
 
         return res;
 }