1 files changed, 320 insertions, 0 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 7d862cd..921a94e 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -132,6 +132,32 @@ protected:
         OLedState m_leds [1];
 };
 
+class SIMpad : public ODevice, public QWSServer::KeyboardFilter {
+protected:
+        virtual void init ( );
+        virtual void initButtons ( );
+
+public:
+        virtual bool setSoftSuspend ( bool soft );
+
+        virtual bool setDisplayBrightness ( int b );
+        virtual int displayBrightnessResolution ( ) const;
+
+        virtual void alarmSound ( );
+
+    virtual QValueList <OLed> ledList ( ) const;
+        virtual QValueList <OLedState> ledStateList ( OLed led ) const;
+        virtual OLedState ledState ( OLed led ) const;
+        virtual bool setLedState ( OLed led, OLedState st );
+
+protected:
+        virtual bool filter ( int unicode, int keycode, int modifiers, bool isPress, bool autoRepeat );
+        virtual void timerEvent ( QTimerEvent *te );
+
+        int m_power_timer;
+
+        OLedState m_leds [1]; //FIXME check if really only one
+};
 
 struct i_button {
         uint model;
@@ -229,6 +255,28 @@ struct z_button z_buttons_c700 [] = {
         "QPE/Rotation", "flip()" },
 };
 
+struct s_button {
+        uint model;
+    Qt::Key code;
+    char *utext;
+    char *pix;
+    char *fpressedservice;
+    char *fpressedaction;
+    char *fheldservice;
+    char *fheldaction;
+} simpad_buttons [] = {
+    { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
+    Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
+        "devicebuttons/simpad_menu",
+         "QPE/TaskBar", "toggleMenu()",
+        "QPE/TaskBar", "toggleStartMenu()" },
+    { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
+    Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
+        "devicebuttons/ipaq_home",
+        "QPE/Launcher", "home()",
+        "buttonsettings", "raise()" },
+};
+
 static QCString makeChannel ( const char *str )
 {
         if ( str && !::strchr ( str, '/' ))
@@ -251,6 +299,8 @@ ODevice *ODevice::inst ( )
                         dev = new iPAQ ( );
                 else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
                         dev = new Zaurus ( );
+                else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/CS3" ))
+                        dev = new SIMpad ( );
                 else
                         dev = new ODevice ( );
 
@@ -1440,3 +1490,273 @@ int Zaurus::displayBrightnessResolution ( ) const
 }
 
 
+/**************************************************
+ *
+ * SIMpad
+ *
+ **************************************************/
+
+void SIMpad::init ( )
+{
+        d-> m_vendorstr = "SIEMENS";
+        d-> m_vendor = Vendor_SIEMENS;
+
+        QFile f ( "/proc/hal/model" );
+
+    //TODO Implement model checking
+    //FIXME For now we assume an SL4
+
+    d-> m_modelstr = "SL4";
+    d-> m_model = Model_SIMpad_SL4;
+
+        switch ( d-> m_model ) {
+                default:
+                        d-> m_rotation = Rot270;
+                        break;
+        }
+
+        f. setName ( "/etc/familiar-version" );
+        if ( f. open ( IO_ReadOnly )) {
+                d-> m_systemstr = "Familiar";
+                d-> m_system = System_Familiar;
+
+                QTextStream ts ( &f );
+                d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
+
+                f. close ( );
+        } else {
+            f. setName ( "/etc/oz_version" );
+
+                    if ( f. open ( IO_ReadOnly )) {
+                    d-> m_systemstr = "OpenEmbedded/SIMpad";
+                d-> m_system = System_OpenZaurus;
+
+                    QTextStream ts ( &f );
+                    ts.setDevice ( &f );
+                    d-> m_sysverstr = ts. readLine ( );
+                    f. close ( );
+        }
+    }
+
+        m_leds [0] = m_leds [1] = Led_Off;
+
+        m_power_timer = 0;
+
+}
+
+void SIMpad::initButtons ( )
+{
+        if ( d-> m_buttons )
+                return;
+
+        if ( isQWS( ) )
+                QWSServer::setKeyboardFilter ( this );
+
+        d-> m_buttons = new QValueList <ODeviceButton>;
+
+        for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
+                s_button *sb = simpad_buttons + i;
+                ODeviceButton b;
+
+                if (( sb-> model & d-> m_model ) == d-> m_model ) {
+                        b. setKeycode ( sb-> code );
+                        b. setUserText ( QObject::tr ( "Button", sb-> utext ));
+                        b. setPixmap ( Resource::loadPixmap ( sb-> pix ));
+                        b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction ));
+                        b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction ));
+
+                        d-> m_buttons-> append ( b );
+                }
+        }
+        reloadButtonMapping ( );
+
+        QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
+        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+}
+
+// SIMpad boardcontrol register CS3
+#define SIMPAD_BOARDCONTROL "/proc/CS3"
+#define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
+#define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
+#define SIMPAD_EN1                         0x0004 // This is only for EPROM's
+#define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
+#define SIMPAD_DISPLAY_ON                  0x0010
+#define SIMPAD_PCMCIA_BUFF_DIS             0x0020
+#define SIMPAD_MQ_RESET                    0x0040
+#define SIMPAD_PCMCIA_RESET                0x0080
+#define SIMPAD_DECT_POWER_ON               0x0100
+#define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
+#define SIMPAD_RS232_ON                    0x0400
+#define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
+#define SIMPAD_LED2_ON                     0x1000
+#define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
+#define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
+#define SIMPAD_RESET_SIMCARD               0x8000
+
+//SIMpad touchscreen backlight strength control
+#define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
+#define SIMPAD_BACKLIGHT_MASK    0x00a10044
+
+QValueList <OLed> SIMpad::ledList ( ) const
+{
+        QValueList <OLed> vl;
+        vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
+        //vl << Led_Mail; //TODO find out if LED1 is accessible anyway
+        return vl;
+}
+
+QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
+{
+        QValueList <OLedState> vl;
+
+        if ( l == Led_Power )  //FIXME which LED is LED2 ? The green one or the amber one?
+                vl << Led_Off << Led_On;
+        //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
+                //vl << Led_Off;
+        return vl;
+}
+
+OLedState SIMpad::ledState ( OLed l ) const
+{
+        switch ( l ) {
+                case Led_Power:
+                        return m_leds [0];
+                //case Led_Mail:
+                        //return m_leds [1];
+                default:
+                        return Led_Off;
+        }
+}
+
+bool SIMpad::setLedState ( OLed l, OLedState st )
+{
+        static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK );
+
+        if ( l == Led_Power ) {
+                if ( fd >= 0 ) {
+                        LED_IN leds;
+                        ::memset ( &leds, 0, sizeof( leds ));
+                        leds. TotalTime  = 0;
+                        leds. OnTime     = 0;
+                        leds. OffTime    = 1;
+                        leds. OffOnBlink = 2;
+
+                        switch ( st ) {
+                                case Led_Off      : leds. OffOnBlink = 0; break;
+                                case Led_On       : leds. OffOnBlink = 1; break;
+                                case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
+                                case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
+                        }
+
+                        {
+            /*TODO Implement this like that:
+               read from CS3
+               && with SIMPAD_LED2_ON
+               write to CS3 */
+                                m_leds [0] = st;
+                                return true;
+                        }
+                }
+        }
+        return false;
+}
+
+
+bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
+{
+        //TODO
+        return false;
+}
+
+void SIMpad::timerEvent ( QTimerEvent * )
+{
+        killTimer ( m_power_timer );
+        m_power_timer = 0;
+        QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
+        QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
+}
+
+
+void SIMpad::alarmSound ( )
+{
+#ifndef QT_NO_SOUND
+        static Sound snd ( "alarm" );
+        int fd;
+        int vol;
+        bool vol_reset = false;
+
+        if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
+                if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
+                        Config cfg ( "qpe" );
+                        cfg. setGroup ( "Volume" );
+
+                        int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
+                        if ( volalarm < 0 )
+                                volalarm = 0;
+                        else if ( volalarm > 100 )
+                                volalarm = 100;
+                        volalarm |= ( volalarm << 8 );
+
+                        if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
+                                vol_reset = true;
+                }
+        }
+
+        snd. play ( );
+        while ( !snd. isFinished ( ))
+                qApp-> processEvents ( );
+
+        if ( fd >= 0 ) {
+                if ( vol_reset )
+                        ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
+                ::close ( fd );
+        }
+#endif
+}
+
+
+bool SIMpad::setSoftSuspend ( bool soft )
+{
+        //TODO
+        return false;
+}
+
+
+bool SIMpad::setDisplayBrightness ( int bright )
+{
+        bool res = false;
+        int fd;
+
+        if ( bright > 255 )
+                bright = 255;
+        if ( bright < 0 )
+                bright = 0;
+
+        if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
+                int value = 255 - bright;
+                const int mask = SIMPAD_BACKLIGHT_MASK;
+                value = value << 8;
+                value += mask;
+                char writeCommand[100];
+                const int count = sprintf( writeCommand, "0x%x\n", value );
+                res = ( ::write ( fd, writeCommand, count ) != -1 );
+                ::close ( fd );
+        }
+        return res;
+}
+
+
+int SIMpad::displayBrightnessResolution ( ) const
+{
+        switch ( model ( )) {
+                case Model_SIMpad_CL4:
+                case Model_SIMpad_SL4:
+                case Model_SIMpad_SLC:
+                case Model_SIMpad_TSinus:
+                        return 255; //TODO find out if this is save
+
+                default:
+                        return 2;
+        }
+}
+