1 files changed, 3 insertions, 29 deletions

diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp
index 34876da..335e0db 100644
--- a/libopie2/opiecore/device/odevice_simpad.cpp
+++ b/libopie2/opiecore/device/odevice_simpad.cpp
@@ -125,97 +125,91 @@ void SIMpad::init(const QString&)
     d->m_modelstr = "SL4";
     d->m_model = Model_SIMpad_SL4;
 
     switch ( d->m_model ) {
         default:
             d->m_rotation = Rot0;
             d->m_direction = CCW;
             d->m_holdtime = 1000; // 1000ms
 
             break;
     }
 
     //Distribution detecting code is now in base class
     m_leds [0] = m_leds [1] = Led_Off;
 
     m_power_timer = 0;
 
 }
 
 void SIMpad::initButtons()
 {
     if ( d->m_buttons )
         return;
 
-    if ( isQWS( ) ) {
-        addPreHandler(this);
-    }
-
-
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
         s_button *sb = simpad_buttons + i;
         ODeviceButton b;
 
         if (( sb->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( sb->code );
             b. setUserText ( QObject::tr ( "Button", sb->utext ));
             b. setPixmap ( Resource::loadPixmap ( sb->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
     connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
-#define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
-#define SIMPAD_BACKLIGHT_MASK    0x00a10044
+#define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/backlight"
 
 
 /*
  * The SIMpad exposes ChipSelect3 to userspace
  * via a proc filesystem file. Using this register
  * one can toggle power of serial, irda, dect circuits
  * change the video driver and display status and
  * many more things.
  * To not lose the current setting we read the current
  * cs3 setting and toggle the necessary bits and then
  * write it.
  */
 static bool setCS3Bit(  bool bitset, int bit ) {
     int cs3_fd = ::open( SIMPAD_BOARDCONTROL, O_RDONLY );
 
     if ( cs3_fd < 0 )
         return false;
 
     static char line[32];
     int  val = 0;
     bool ok  = false;
 
     /*
      * try to read and parse the Chipselect3 status
@@ -278,123 +272,103 @@ QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 
 OLedState SIMpad::ledState ( OLed l ) const
 {
     switch ( l ) {
         case Led_Power:
             return m_leds [0];
         //case Led_Mail:
         //  return m_leds [1];
         default:
             return Led_Off;
     }
 }
 
 bool SIMpad::setLedState ( OLed l, OLedState st )
 {
     if ( l == Led_Power ) {
         m_leds [0] = st;
         setCS3Bit(st == Led_On, SIMPAD_LED2_ON);
         return true;
     }
 
     return false;
 }
 
-
-bool SIMpad::filter ( int /*unicode*/, int /*keycode*/, int /*modifiers*/, bool /*isPress*/, bool /*autoRepeat*/ )
-{
-    //TODO
-    return false;
-}
-
 void SIMpad::timerEvent ( QTimerEvent * )
 {
     killTimer ( m_power_timer );
     m_power_timer = 0;
     QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
     QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void SIMpad::playAlarmSound()
 {
 #ifndef QT_NO_SOUND
     static Sound snd ( "alarm" );
     if(!snd.isFinished())
         return;
 
     /* save as the Sound is static! */
     changeMixerForAlarm( 0, "/dev/sound/mixer" , &snd);
     snd. play();
 #endif
 }
 
 
 bool SIMpad::suspend() // Must override because SIMpad does NOT have apm
 {
     qDebug( "ODevice for SIMpad: suspend()" );
     if ( !isQWS( ) ) // only qwsserver is allowed to suspend
         return false;
 
     /*
      * we need to save the screen content
      * then go to suspend using ODevice::suspend
      * and finally restore the screen content
      */
     (void)::system( "cat /dev/fb/0 > /tmp/.buffer" );
     bool res  = ODevice::suspend();
 
     /*
      * restore
      */
     if ( res )
         ::system( "cat /tmp/.buffer > /dev/fb/0" );
 
     return res;
 }
 
-
-bool SIMpad::setSoftSuspend ( bool soft )
-{
-    qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" );
-    return false;
-}
-
-
 bool SIMpad::setDisplayStatus ( bool on )
 {
     qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" );
 
     return setCS3Bit(on, SIMPAD_DISPLAY_ON);
 }
 
 
 bool SIMpad::setDisplayBrightness ( int bright )
 {
     qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright );
     bool res = false;
     int fd;
 
     if ( bright > 255 )
         bright = 255;
     if ( bright < 1 )
         bright = 0;
 
     if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
-        int value = 255 - bright;
-        const int mask = SIMPAD_BACKLIGHT_MASK;
-        value = value << 8;
-        value += mask;
-        char writeCommand[100];
-        const int count = snprintf( writeCommand, sizeof(writeCommand), "0x%x\n", value );
-        res = ( ::write ( fd, writeCommand, count ) != -1 );
+        QCString str = QFile::encodeName( QString::number(bright));
+        res = ( ::write(fd, str, str.length()) != -1 );
         ::close ( fd );
     }
     return res;
 }
 
 
 int SIMpad::displayBrightnessResolution() const
 {
     return 255; // All SIMpad models share the same display
 }