-rw-r--r-- | libopie2/opiecore/device/odevice.cpp | 2 | ||||
-rw-r--r-- | libopie2/opiecore/device/odevice_ipaq.cpp | 2 | ||||
-rw-r--r-- | libopie2/opiecore/device/odevice_simpad.cpp | 2 | ||||
-rw-r--r-- | libopie2/opiecore/device/odevice_yopy.cpp | 4 | ||||
-rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.cpp | 4 |
5 files changed, 7 insertions, 7 deletions
diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp index b8d48fe..27b0e53 100644 --- a/libopie2/opiecore/device/odevice.cpp +++ b/libopie2/opiecore/device/odevice.cpp @@ -124,49 +124,49 @@ void ODevice::systemMessage ( const QCString &msg, const QByteArray & ) { if ( msg == "deviceButtonMappingChanged()" ) { reloadButtonMapping(); } } void ODevice::init() { } /** * This method initialises the button mapping */ void ODevice::initButtons() { if ( d->m_buttons ) return; qDebug ( "init Buttons" ); d->m_buttons = new QValueList <ODeviceButton>; reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); + connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } ODevice::~ODevice() { // we leak m_devicebuttons and m_cpu_frequency // but it's a singleton and it is not so importantant // -zecke delete d; } bool ODevice::setSoftSuspend ( bool /*soft*/ ) { return false; } //#include <linux/apm_bios.h> #define APM_IOC_SUSPEND OD_IO( 'A', 2 ) /** * This method will try to suspend the device * It only works if the user is the QWS Server and the apm application * is installed. * It tries to suspend and then waits some time cause some distributions diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp index cc4b01a..8ecea1b 100644 --- a/libopie2/opiecore/device/odevice_ipaq.cpp +++ b/libopie2/opiecore/device/odevice_ipaq.cpp @@ -191,49 +191,49 @@ void iPAQ::initButtons() return; if ( isQWS( ) ) QWSServer::setKeyboardFilter ( this ); d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) { i_button *ib = ipaq_buttons + i; ODeviceButton b; if (( ib->model & d->m_model ) == d->m_model ) { b. setKeycode ( ib->code ); b. setUserText ( QObject::tr ( "Button", ib->utext )); b. setPixmap ( Resource::loadPixmap ( ib->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction )); d->m_buttons->append ( b ); } } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); + connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } QValueList <OLed> iPAQ::ledList() const { QValueList <OLed> vl; vl << Led_Power; if ( d->m_model == Model_iPAQ_H38xx ) vl << Led_BlueTooth; return vl; } QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Power ) vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast; else if ( l == Led_BlueTooth && d->m_model == Model_iPAQ_H38xx ) vl << Led_Off; // << Led_On << ??? return vl; } diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp index 31b9297..90aca2f 100644 --- a/libopie2/opiecore/device/odevice_simpad.cpp +++ b/libopie2/opiecore/device/odevice_simpad.cpp @@ -168,49 +168,49 @@ void SIMpad::initButtons() return; if ( isQWS( ) ) QWSServer::setKeyboardFilter ( this ); d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) { s_button *sb = simpad_buttons + i; ODeviceButton b; if (( sb->model & d->m_model ) == d->m_model ) { b. setKeycode ( sb->code ); b. setUserText ( QObject::tr ( "Button", sb->utext )); b. setPixmap ( Resource::loadPixmap ( sb->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction )); d->m_buttons->append ( b ); } } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); + connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } // SIMpad boardcontrol register CS3 #define SIMPAD_BOARDCONTROL "/proc/cs3" #define SIMPAD_VCC_5V_EN 0x0001 // For 5V PCMCIA #define SIMPAD_VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA #define SIMPAD_EN1 0x0004 // This is only for EPROM's #define SIMPAD_EN0 0x0008 // Both should be enable for 3.3V or 5V #define SIMPAD_DISPLAY_ON 0x0010 #define SIMPAD_PCMCIA_BUFF_DIS 0x0020 #define SIMPAD_MQ_RESET 0x0040 #define SIMPAD_PCMCIA_RESET 0x0080 #define SIMPAD_DECT_POWER_ON 0x0100 #define SIMPAD_IRDA_SD 0x0200 // Shutdown for powersave #define SIMPAD_RS232_ON 0x0400 #define SIMPAD_SD_MEDIAQ 0x0800 // Shutdown for powersave #define SIMPAD_LED2_ON 0x1000 #define SIMPAD_IRDA_MODE 0x2000 // Fast/Slow IrDA mode #define SIMPAD_ENABLE_5V 0x4000 // Enable 5V circuit #define SIMPAD_RESET_SIMCARD 0x8000 //SIMpad touchscreen backlight strength control #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL" #define SIMPAD_BACKLIGHT_MASK 0x00a10044 diff --git a/libopie2/opiecore/device/odevice_yopy.cpp b/libopie2/opiecore/device/odevice_yopy.cpp index a76f90b..d241db8 100644 --- a/libopie2/opiecore/device/odevice_yopy.cpp +++ b/libopie2/opiecore/device/odevice_yopy.cpp @@ -98,50 +98,50 @@ void Yopy::initButtons() return ; d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof( yopy_button ) ); i++ ) { yopy_button *ib = yopy_buttons + i; ODeviceButton b; b. setKeycode ( ib->code ); b. setUserText ( QObject::tr ( "Button", ib->utext ) ); b. setPixmap ( Resource::loadPixmap ( ib->pix ) ); b. setFactoryPresetPressedAction ( OQCopMessage( makeChannel( ib->fpressedservice ), ib->fpressedaction ) ); b. setFactoryPresetHeldAction ( OQCopMessage( makeChannel( ib->fheldservice ), ib->fheldaction ) ); d->m_buttons->append ( b ); } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel( "QPE/System", this ); - connect( sysch, SIGNAL( received( const QCString &, const QByteArray & ) ), - this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) ); + connect( sysch, SIGNAL( received(const QCString&,const QByteArray&) ), + this, SLOT( systemMessage(const QCString&,const QByteArray&) ) ); } bool Yopy::suspend() { /* Opie for Yopy does not implement its own power management at the moment. The public version runs parallel to X, and relies on the existing power management features. */ return false; } bool Yopy::setDisplayBrightness( int bright ) { /* The code here works, but is disabled as the current version runs parallel to X, and relies on the existing backlight demon. */ #if 0 if ( QFile::exists( "/proc/sys/pm/light" ) ) { int fd = ::open( "/proc/sys/pm/light", O_WRONLY ); if ( fd >= 0 ) { if ( bright ) ::write( fd, "1\n", 2 ); diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp index 9d23a12..8ab3cbe 100644 --- a/libopie2/opiecore/device/odevice_zaurus.cpp +++ b/libopie2/opiecore/device/odevice_zaurus.cpp @@ -231,50 +231,50 @@ void Zaurus::initButtons() default: pz_buttons = z_buttons; buttoncount = ARRAY_SIZE(z_buttons); break; } for ( int i = 0; i < buttoncount; i++ ) { struct z_button *zb = pz_buttons + i; ODeviceButton b; b. setKeycode ( zb->code ); b. setUserText ( QObject::tr ( "Button", zb->utext )); b. setPixmap ( Resource::loadPixmap ( zb->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb->fpressedservice ), zb->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb->fheldservice ), zb->fheldaction )); d->m_buttons->append ( b ); } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), - this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); + connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), + this, SLOT( systemMessage(const QCString&,const QByteArray&))); } #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> //#include <asm/sharp_char.h> // including kernel headers is evil ... #define SHARP_DEV_IOCTL_COMMAND_START 0x5680 #define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) #define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START) #define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */ #define SHARP_BUZ_KEYSOUND 2 /* key sound */ #define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */ /* --- for SHARP_BUZZER device --- */ //#define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) //#define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START) #define SHARP_BUZZER_SETVOLUME (SHARP_BUZZER_IOCTL_START+1) #define SHARP_BUZZER_GETVOLUME (SHARP_BUZZER_IOCTL_START+2) |