5 files changed, 7 insertions, 7 deletions

diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp
index b8d48fe..27b0e53 100644
--- a/libopie2/opiecore/device/odevice.cpp
+++ b/libopie2/opiecore/device/odevice.cpp
@@ -100,97 +100,97 @@ ODevice *ODevice::inst()
     }
     return dev;
 }
 
 ODevice::ODevice()
 {
     d = new ODeviceData;
 
     d->m_modelstr = "Unknown";
     d->m_model = Model_Unknown;
     d->m_vendorstr = "Unknown";
     d->m_vendor = Vendor_Unknown;
     d->m_systemstr = "Unknown";
     d->m_system = System_Unknown;
     d->m_sysverstr = "0.0";
     d->m_rotation = Rot0;
     d->m_direction = CW;
 
     d->m_holdtime = 1000; // 1000ms
     d->m_buttons = 0;
     d->m_cpu_frequencies = new QStrList;
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
     if ( msg == "deviceButtonMappingChanged()" ) {
         reloadButtonMapping();
     }
 }
 
 void ODevice::init()
 {
 }
 
 /**
 * This method initialises the button mapping
 */
 void ODevice::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     qDebug ( "init Buttons" );
     d->m_buttons = new QValueList <ODeviceButton>;
 
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 ODevice::~ODevice()
 {
 // we leak m_devicebuttons and m_cpu_frequency
 // but it's a singleton and it is not so importantant
 // -zecke
     delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
     return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 /**
 * This method will try to suspend the device
 * It only works if the user is the QWS Server and the apm application
 * is installed.
 * It tries to suspend and then waits some time cause some distributions
 * do have asynchronus apm implementations.
 * This method will either fail and return false or it'll suspend the
 * device and return once the device got woken up
 *
 * @return if the device got suspended
 */
 bool ODevice::suspend()
 {
     qDebug("ODevice::suspend");
     if ( !isQWS( ) ) // only qwsserver is allowed to suspend
         return false;
 
     if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
         return false;
 
     bool res = false;
     ODevice::sendSuspendmsg();
     
     struct timeval tvs, tvn;
     ::gettimeofday ( &tvs, 0 );
 
     ::sync(); // flush fs caches
     res = ( ::system ( "apm --suspend" ) == 0 );
 
diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp
index cc4b01a..8ecea1b 100644
--- a/libopie2/opiecore/device/odevice_ipaq.cpp
+++ b/libopie2/opiecore/device/odevice_ipaq.cpp
@@ -167,97 +167,97 @@ void iPAQ::init()
         f. close();
     } else {
         f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
             d->m_systemstr = "OpenEmbedded/iPaq";
             d->m_system = System_Familiar;
 
             QTextStream ts ( &f );
             ts.setDevice ( &f );
             d->m_sysverstr = ts. readLine();
             f. close();
         }
     }
 
     m_leds [0] = m_leds [1] = Led_Off;
 
     m_power_timer = 0;
 
 }
 
 void iPAQ::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     if ( isQWS( ) )
         QWSServer::setKeyboardFilter ( this );
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
         i_button *ib = ipaq_buttons + i;
         ODeviceButton b;
 
         if (( ib->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( ib->code );
             b. setUserText ( QObject::tr ( "Button", ib->utext ));
             b. setPixmap ( Resource::loadPixmap ( ib->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 QValueList <OLed> iPAQ::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power;
 
     if ( d->m_model == Model_iPAQ_H38xx )
         vl << Led_BlueTooth;
     return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Power )
         vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
     else if ( l == Led_BlueTooth && d->m_model == Model_iPAQ_H38xx )
         vl << Led_Off; // << Led_On << ???
 
     return vl;
 }
 
 OLedState iPAQ::ledState ( OLed l ) const
 {
     switch ( l ) {
         case Led_Power:
             return m_leds [0];
         case Led_BlueTooth:
             return m_leds [1];
         default:
             return Led_Off;
     }
 }
 
 bool iPAQ::setLedState ( OLed l, OLedState st )
 {
     static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK );
 
     if ( l == Led_Power ) {
         if ( fd >= 0 ) {
             LED_IN leds;
             ::memset ( &leds, 0, sizeof( leds ));
             leds. TotalTime  = 0;
             leds. OnTime     = 0;
             leds. OffTime    = 1;
             leds. OffOnBlink = 2;
diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp
index 31b9297..90aca2f 100644
--- a/libopie2/opiecore/device/odevice_simpad.cpp
+++ b/libopie2/opiecore/device/odevice_simpad.cpp
@@ -144,97 +144,97 @@ void SIMpad::init()
         f. close();
     } else {
         f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
             d->m_systemstr = "OpenEmbedded/SIMpad";
             d->m_system = System_OpenZaurus;
 
             QTextStream ts ( &f );
             ts.setDevice ( &f );
             d->m_sysverstr = ts. readLine();
             f. close();
         }
     }
 
     m_leds [0] = m_leds [1] = Led_Off;
 
     m_power_timer = 0;
 
 }
 
 void SIMpad::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     if ( isQWS( ) )
         QWSServer::setKeyboardFilter ( this );
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
         s_button *sb = simpad_buttons + i;
         ODeviceButton b;
 
         if (( sb->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( sb->code );
             b. setUserText ( QObject::tr ( "Button", sb->utext ));
             b. setPixmap ( Resource::loadPixmap ( sb->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
 #define SIMPAD_BACKLIGHT_MASK    0x00a10044
 
 QValueList <OLed> SIMpad::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
     //vl << Led_Mail; //TODO find out if LED1 is accessible anyway
     return vl;
 }
 
 QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Power )  //FIXME which LED is LED2 ? The green one or the amber one?
         vl << Led_Off << Led_On;
     //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
         //vl << Led_Off;
     return vl;
 }
 
 OLedState SIMpad::ledState ( OLed l ) const
 {
     switch ( l ) {
         case Led_Power:
diff --git a/libopie2/opiecore/device/odevice_yopy.cpp b/libopie2/opiecore/device/odevice_yopy.cpp
index a76f90b..d241db8 100644
--- a/libopie2/opiecore/device/odevice_yopy.cpp
+++ b/libopie2/opiecore/device/odevice_yopy.cpp
@@ -74,90 +74,90 @@ void Yopy::init()
 {
     d->m_vendorstr = "G.Mate";
     d->m_vendor = Vendor_GMate;
     d->m_modelstr = "Yopy3700";
     d->m_model = Model_Yopy_3700;
     d->m_rotation = Rot0;
 
     d->m_systemstr = "Linupy";
     d->m_system = System_Linupy;
 
     QFile f ( "/etc/issue" );
     if ( f. open ( IO_ReadOnly ) )
     {
         QTextStream ts ( &f );
         ts.readLine();
         d->m_sysverstr = ts. readLine();
         f. close();
     }
 }
 
 
 void Yopy::initButtons()
 {
     if ( d->m_buttons )
         return ;
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof( yopy_button ) ); i++ )
     {
 
         yopy_button *ib = yopy_buttons + i;
 
         ODeviceButton b;
 
         b. setKeycode ( ib->code );
         b. setUserText ( QObject::tr ( "Button", ib->utext ) );
         b. setPixmap ( Resource::loadPixmap ( ib->pix ) );
         b. setFactoryPresetPressedAction
         ( OQCopMessage( makeChannel( ib->fpressedservice ), ib->fpressedaction ) );
         b. setFactoryPresetHeldAction
         ( OQCopMessage( makeChannel( ib->fheldservice ), ib->fheldaction ) );
 
         d->m_buttons->append ( b );
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel( "QPE/System", this );
-    connect( sysch, SIGNAL( received( const QCString &, const QByteArray & ) ),
-             this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) );
+    connect( sysch, SIGNAL( received(const QCString&,const QByteArray&) ),
+             this, SLOT( systemMessage(const QCString&,const QByteArray&) ) );
 }
 
 
 bool Yopy::suspend()
 {
     /* Opie for Yopy does not implement its own power management at the
         moment.  The public version runs parallel to X, and relies on the
         existing power management features. */
     return false;
 }
 
 
 bool Yopy::setDisplayBrightness( int bright )
 {
     /* The code here works, but is disabled as the current version runs
         parallel to X, and relies on the existing backlight demon. */
 #if 0
     if ( QFile::exists( "/proc/sys/pm/light" ) )
     {
         int fd = ::open( "/proc/sys/pm/light", O_WRONLY );
         if ( fd >= 0 )
         {
             if ( bright )
                 ::write( fd, "1\n", 2 );
             else
                 ::write( fd, "0\n", 2 );
             ::close( fd );
             return true;
         }
     }
 #endif
     return false;
 }
 
 
 int Yopy::displayBrightnessResolution() const
 {
     return 2;
 }
 
diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp
index 9d23a12..8ab3cbe 100644
--- a/libopie2/opiecore/device/odevice_zaurus.cpp
+++ b/libopie2/opiecore/device/odevice_zaurus.cpp
@@ -207,98 +207,98 @@ void Zaurus::init()
         case Model_Zaurus_SLB600:
         case Model_Zaurus_SL5500:
         case Model_Zaurus_SL5000:
         default:
             d->m_rotation = Rot270;
             break;
     }
     m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     struct z_button * pz_buttons;
     int buttoncount;
     switch ( d->m_model ) {
         case Model_Zaurus_SLC7x0:
             pz_buttons = z_buttons_c700;
             buttoncount = ARRAY_SIZE(z_buttons_c700);
             break;
         default:
             pz_buttons = z_buttons;
             buttoncount = ARRAY_SIZE(z_buttons);
             break;
     }
 
     for ( int i = 0; i < buttoncount; i++ ) {
         struct z_button *zb = pz_buttons + i;
         ODeviceButton b;
 
         b. setKeycode ( zb->code );
         b. setUserText ( QObject::tr ( "Button", zb->utext ));
         b. setPixmap ( Resource::loadPixmap ( zb->pix ));
         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb->fpressedservice ),
                                 zb->fpressedaction ));
         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb->fheldservice ),
                                 zb->fheldaction ));
 
         d->m_buttons->append ( b );
     }
 
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )),
-        this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)),
+        this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
         #defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
         //#defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
         #defineSHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)