summaryrefslogtreecommitdiff
path: root/libopie2/opienet/wireless.15.h
Unidiff
Diffstat (limited to 'libopie2/opienet/wireless.15.h') (more/less context) (show whitespace changes)
-rw-r--r--libopie2/opienet/wireless.15.h705
1 files changed, 0 insertions, 705 deletions
diff --git a/libopie2/opienet/wireless.15.h b/libopie2/opienet/wireless.15.h
deleted file mode 100644
index 8135e97..0000000
--- a/libopie2/opienet/wireless.15.h
+++ b/dev/null
@@ -1,705 +0,0 @@
1/*
2 * This file define a set of standard wireless extensions
3 *
4 * Version : 1512.7.02
5 *
6 * Authors :Jean Tourrilhes - HPL - <jt@hpl.hp.com>
7 * Copyright (c) 1997-2002 Jean Tourrilhes, All Rights Reserved.
8 */
9
10#ifndef _LINUX_WIRELESS_H
11#define _LINUX_WIRELESS_H
12
13/************************** DOCUMENTATION **************************/
14/*
15 * Initial APIs (1996 -> onward) :
16 * -----------------------------
17 * Basically, the wireless extensions are for now a set of standard ioctl
18 * call + /proc/net/wireless
19 *
20 * The entry /proc/net/wireless give statistics and information on the
21 * driver.
22 * This is better than having each driver having its entry because
23 * its centralised and we may remove the driver module safely.
24 *
25 * Ioctl are used to configure the driver and issue commands. This is
26 * better than command line options of insmod because we may want to
27 * change dynamically (while the driver is running) some parameters.
28 *
29 * The ioctl mechanimsm are copied from standard devices ioctl.
30 * We have the list of command plus a structure descibing the
31 * data exchanged...
32 * Note that to add these ioctl, I was obliged to modify :
33 *# net/core/dev.c (two place + add include)
34 *# net/ipv4/af_inet.c (one place + add include)
35 *
36 * /proc/net/wireless is a copy of /proc/net/dev.
37 * We have a structure for data passed from the driver to /proc/net/wireless
38 * Too add this, I've modified :
39 *# net/core/dev.c (two other places)
40 *# include/linux/netdevice.h (one place)
41 *# include/linux/proc_fs.h (one place)
42 *
43 * New driver API (2002 -> onward) :
44 * -------------------------------
45 * This file is only concerned with the user space API and common definitions.
46 * The new driver API is defined and documented in :
47 *# include/net/iw_handler.h
48 *
49 * Note as well that /proc/net/wireless implementation has now moved in :
50 *# include/linux/wireless.c
51 *
52 * Wireless Events (2002 -> onward) :
53 * --------------------------------
54 * Events are defined at the end of this file, and implemented in :
55 *# include/linux/wireless.c
56 *
57 * Other comments :
58 * --------------
59 * Do not add here things that are redundant with other mechanisms
60 * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
61 * wireless specific.
62 *
63 * These wireless extensions are not magic : each driver has to provide
64 * support for them...
65 *
66 * IMPORTANT NOTE : As everything in the kernel, this is very much a
67 * work in progress. Contact me if you have ideas of improvements...
68 */
69
70/***************************** INCLUDES *****************************/
71
72#include <sys/types.h>
73#include <net/if.h>
74#include <linux/types.h>
75
76#ifndef IFNAMSIZ
77#define IFNAMSIZ 16
78#endif
79#ifndef IW_MAX_PRIV_DEF
80#define IW_MAX_PRIV_DEF 128
81#endif
82
83/***************************** VERSION *****************************/
84/*
85 * This constant is used to know the availability of the wireless
86 * extensions and to know which version of wireless extensions it is
87 * (there is some stuff that will be added in the future...)
88 * I just plan to increment with each new version.
89 */
90 #define WIRELESS_EXT15
91
92/*
93 * Changes :
94 *
95 * V2 to V3
96 * --------
97 *Alan Cox start some incompatibles changes. I've integrated a bit more.
98 *- Encryption renamed to Encode to avoid US regulation problems
99 *- Frequency changed from float to struct to avoid problems on old 386
100 *
101 * V3 to V4
102 * --------
103 *- Add sensitivity
104 *
105 * V4 to V5
106 * --------
107 *- Missing encoding definitions in range
108 *- Access points stuff
109 *
110 * V5 to V6
111 * --------
112 *- 802.11 support (ESSID ioctls)
113 *
114 * V6 to V7
115 * --------
116 *- define IW_ESSID_MAX_SIZE and IW_MAX_AP
117 *
118 * V7 to V8
119 * --------
120 *- Changed my e-mail address
121 *- More 802.11 support (nickname, rate, rts, frag)
122 *- List index in frequencies
123 *
124 * V8 to V9
125 * --------
126 *- Support for 'mode of operation' (ad-hoc, managed...)
127 *- Support for unicast and multicast power saving
128 *- Change encoding to support larger tokens (>64 bits)
129 *- Updated iw_params (disable, flags) and use it for NWID
130 *- Extracted iw_point from iwreq for clarity
131 *
132 * V9 to V10
133 * ---------
134 *- Add PM capability to range structure
135 *- Add PM modifier : MAX/MIN/RELATIVE
136 *- Add encoding option : IW_ENCODE_NOKEY
137 *- Add TxPower ioctls (work like TxRate)
138 *
139 * V10 to V11
140 * ----------
141 *- Add WE version in range (help backward/forward compatibility)
142 *- Add retry ioctls (work like PM)
143 *
144 * V11 to V12
145 * ----------
146 *- Add SIOCSIWSTATS to get /proc/net/wireless programatically
147 *- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
148 *- Add new statistics (frag, retry, beacon)
149 *- Add average quality (for user space calibration)
150 *
151 * V12 to V13
152 * ----------
153 *- Document creation of new driver API.
154 *- Extract union iwreq_data from struct iwreq (for new driver API).
155 *- Rename SIOCSIWNAME as SIOCSIWCOMMIT
156 *
157 * V13 to V14
158 * ----------
159 *- Wireless Events support : define struct iw_event
160 *- Define additional specific event numbers
161 *- Add "addr" and "param" fields in union iwreq_data
162 *- AP scanning stuff (SIOCSIWSCAN and friends)
163 *
164 * V14 to V15
165 * ----------
166 *- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
167 *- Make struct iw_freq signed (both m & e), add explicit padding
168 *- Add IWEVCUSTOM for driver specific event/scanning token
169 *- Add IW_MAX_GET_SPY for driver returning a lot of addresses
170 *- Add IW_TXPOW_RANGE for range of Tx Powers
171 *- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
172 *- Add IW_MODE_MONITOR for passive monitor
173 */
174
175/**************************** CONSTANTS ****************************/
176
177/* -------------------------- IOCTL LIST -------------------------- */
178
179/* Wireless Identification */
180 #define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */
181 #define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */
182/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
183 * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
184 * Don't put the name of your driver there, it's useless. */
185
186/* Basic operations */
187 #define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */
188 #define SIOCGIWNWID 0x8B03 /* get network id (the cell) */
189 #define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */
190 #define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */
191 #define SIOCSIWMODE 0x8B06 /* set operation mode */
192 #define SIOCGIWMODE 0x8B07 /* get operation mode */
193 #define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */
194 #define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */
195
196/* Informative stuff */
197 #define SIOCSIWRANGE 0x8B0A /* Unused */
198 #define SIOCGIWRANGE 0x8B0B /* Get range of parameters */
199 #define SIOCSIWPRIV 0x8B0C /* Unused */
200 #define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */
201 #define SIOCSIWSTATS 0x8B0E /* Unused */
202 #define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */
203/* SIOCGIWSTATS is strictly used between user space and the kernel, and
204 * is never passed to the driver (i.e. the driver will never see it). */
205
206/* Mobile IP support (statistics per MAC address) */
207 #define SIOCSIWSPY 0x8B10 /* set spy addresses */
208 #define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */
209
210/* Access Point manipulation */
211 #define SIOCSIWAP 0x8B14 /* set access point MAC addresses */
212 #define SIOCGIWAP 0x8B15 /* get access point MAC addresses */
213 #define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */
214 #define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */
215 #define SIOCGIWSCAN 0x8B19 /* get scanning results */
216
217/* 802.11 specific support */
218 #define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */
219 #define SIOCGIWESSID 0x8B1B /* get ESSID */
220 #define SIOCSIWNICKN 0x8B1C /* set node name/nickname */
221 #define SIOCGIWNICKN 0x8B1D /* get node name/nickname */
222/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
223 * within the 'iwreq' structure, so we need to use the 'data' member to
224 * point to a string in user space, like it is done for RANGE... */
225
226/* Other parameters useful in 802.11 and some other devices */
227 #define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */
228 #define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */
229 #define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */
230 #define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */
231 #define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */
232 #define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */
233 #define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */
234 #define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */
235 #define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */
236 #define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */
237
238/* Encoding stuff (scrambling, hardware security, WEP...) */
239 #define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */
240 #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */
241/* Power saving stuff (power management, unicast and multicast) */
242 #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */
243 #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */
244
245/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
246
247/* These 16 ioctl are wireless device private.
248 * Each driver is free to use them for whatever purpose it chooses,
249 * however the driver *must* export the description of those ioctls
250 * with SIOCGIWPRIV and *must* use arguments as defined below.
251 * If you don't follow those rules, DaveM is going to hate you (reason :
252 * it make mixed 32/64bit operation impossible).
253 */
254 #define SIOCIWFIRSTPRIV0x8BE0
255 #define SIOCIWLASTPRIV0x8BFF
256/* Previously, we were using SIOCDEVPRIVATE, but we now have our
257 * separate range because of collisions with other tools such as
258 * 'mii-tool'.
259 * We now have 32 commands, so a bit more space ;-).
260 * Also, all 'odd' commands are only usable by root and don't return the
261 * content of ifr/iwr to user (but you are not obliged to use the set/get
262 * convention, just use every other two command).
263 * And I repeat : you are not obliged to use them with iwspy, but you
264 * must be compliant with it.
265 */
266
267/* ------------------------- IOCTL STUFF ------------------------- */
268
269/* The first and the last (range) */
270 #define SIOCIWFIRST0x8B00
271 #define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */
272
273/* Even : get (world access), odd : set (root access) */
274 #define IW_IS_SET(cmd)(!((cmd) & 0x1))
275 #define IW_IS_GET(cmd)((cmd) & 0x1)
276
277/* ----------------------- WIRELESS EVENTS ----------------------- */
278/* Those are *NOT* ioctls, do not issue request on them !!! */
279/* Most events use the same identifier as ioctl requests */
280
281 #define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */
282 #define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */
283 #define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */
284 #define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */
285 #define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */
286
287 #define IWEVFIRST0x8C00
288
289/* ------------------------- PRIVATE INFO ------------------------- */
290/*
291 * The following is used with SIOCGIWPRIV. It allow a driver to define
292 * the interface (name, type of data) for its private ioctl.
293 * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
294 */
295
296 #define IW_PRIV_TYPE_MASK 0x7000/* Type of arguments */
297 #define IW_PRIV_TYPE_NONE0x0000
298 #define IW_PRIV_TYPE_BYTE 0x1000/* Char as number */
299 #define IW_PRIV_TYPE_CHAR 0x2000/* Char as character */
300 #define IW_PRIV_TYPE_INT 0x4000/* 32 bits int */
301 #define IW_PRIV_TYPE_FLOAT 0x5000/* struct iw_freq */
302 #define IW_PRIV_TYPE_ADDR 0x6000/* struct sockaddr */
303
304 #define IW_PRIV_SIZE_FIXED 0x0800/* Variable or fixed nuber of args */
305
306 #define IW_PRIV_SIZE_MASK 0x07FF/* Max number of those args */
307
308/*
309 * Note : if the number of args is fixed and the size < 16 octets,
310 * instead of passing a pointer we will put args in the iwreq struct...
311 */
312
313/* ----------------------- OTHER CONSTANTS ----------------------- */
314
315/* Maximum frequencies in the range struct */
316 #define IW_MAX_FREQUENCIES16
317/* Note : if you have something like 80 frequencies,
318 * don't increase this constant and don't fill the frequency list.
319 * The user will be able to set by channel anyway... */
320
321/* Maximum bit rates in the range struct */
322 #define IW_MAX_BITRATES 8
323
324/* Maximum tx powers in the range struct */
325 #define IW_MAX_TXPOWER 8
326/* Note : if you more than 8 TXPowers, just set the max and min or
327 * a few of them in the struct iw_range. */
328
329/* Maximum of address that you may set with SPY */
330 #define IW_MAX_SPY 8/* set */
331 #define IW_MAX_GET_SPY 64/* get */
332
333/* Maximum of address that you may get in the
334 list of access points in range */
335 #define IW_MAX_AP 64
336
337/* Maximum size of the ESSID and NICKN strings */
338 #define IW_ESSID_MAX_SIZE32
339
340/* Modes of operation */
341 #define IW_MODE_AUTO 0/* Let the driver decides */
342 #define IW_MODE_ADHOC 1/* Single cell network */
343 #define IW_MODE_INFRA 2/* Multi cell network, roaming, ... */
344 #define IW_MODE_MASTER 3/* Synchronisation master or Access Point */
345 #define IW_MODE_REPEAT 4/* Wireless Repeater (forwarder) */
346 #define IW_MODE_SECOND 5/* Secondary master/repeater (backup) */
347 #define IW_MODE_MONITOR 6/* Passive monitor (listen only) */
348
349/* Maximum number of size of encoding token available
350 * they are listed in the range structure */
351 #define IW_MAX_ENCODING_SIZES8
352
353/* Maximum size of the encoding token in bytes */
354 #define IW_ENCODING_TOKEN_MAX 32/* 256 bits (for now) */
355
356/* Flags for encoding (along with the token) */
357 #define IW_ENCODE_INDEX 0x00FF/* Token index (if needed) */
358 #define IW_ENCODE_FLAGS 0xFF00/* Flags defined below */
359 #define IW_ENCODE_MODE 0xF000/* Modes defined below */
360 #define IW_ENCODE_DISABLED 0x8000/* Encoding disabled */
361 #define IW_ENCODE_ENABLED 0x0000/* Encoding enabled */
362 #define IW_ENCODE_RESTRICTED 0x4000/* Refuse non-encoded packets */
363 #define IW_ENCODE_OPEN 0x2000/* Accept non-encoded packets */
364#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
365
366/* Power management flags available (along with the value, if any) */
367 #define IW_POWER_ON 0x0000/* No details... */
368 #define IW_POWER_TYPE 0xF000/* Type of parameter */
369 #define IW_POWER_PERIOD 0x1000/* Value is a period/duration of */
370 #define IW_POWER_TIMEOUT 0x2000/* Value is a timeout (to go asleep) */
371 #define IW_POWER_MODE 0x0F00/* Power Management mode */
372 #define IW_POWER_UNICAST_R 0x0100/* Receive only unicast messages */
373 #define IW_POWER_MULTICAST_R 0x0200/* Receive only multicast messages */
374 #define IW_POWER_ALL_R 0x0300/* Receive all messages though PM */
375 #define IW_POWER_FORCE_S 0x0400/* Force PM procedure for sending unicast */
376 #define IW_POWER_REPEATER 0x0800/* Repeat broadcast messages in PM period */
377 #define IW_POWER_MODIFIER 0x000F/* Modify a parameter */
378 #define IW_POWER_MIN 0x0001/* Value is a minimum */
379 #define IW_POWER_MAX 0x0002/* Value is a maximum */
380 #define IW_POWER_RELATIVE 0x0004/* Value is not in seconds/ms/us */
381
382/* Transmit Power flags available */
383 #define IW_TXPOW_TYPE 0x00FF/* Type of value */
384 #define IW_TXPOW_DBM 0x0000/* Value is in dBm */
385 #define IW_TXPOW_MWATT 0x0001/* Value is in mW */
386 #define IW_TXPOW_RANGE 0x1000/* Range of value between min/max */
387
388/* Retry limits and lifetime flags available */
389 #define IW_RETRY_ON 0x0000/* No details... */
390 #define IW_RETRY_TYPE 0xF000/* Type of parameter */
391 #define IW_RETRY_LIMIT 0x1000/* Maximum number of retries*/
392 #define IW_RETRY_LIFETIME 0x2000/* Maximum duration of retries in us */
393 #define IW_RETRY_MODIFIER 0x000F/* Modify a parameter */
394 #define IW_RETRY_MIN 0x0001/* Value is a minimum */
395 #define IW_RETRY_MAX 0x0002/* Value is a maximum */
396 #define IW_RETRY_RELATIVE 0x0004/* Value is not in seconds/ms/us */
397
398/* Scanning request flags */
399 #define IW_SCAN_DEFAULT 0x0000/* Default scan of the driver */
400 #define IW_SCAN_ALL_ESSID 0x0001/* Scan all ESSIDs */
401 #define IW_SCAN_THIS_ESSID 0x0002/* Scan only this ESSID */
402 #define IW_SCAN_ALL_FREQ 0x0004/* Scan all Frequencies */
403 #define IW_SCAN_THIS_FREQ 0x0008/* Scan only this Frequency */
404 #define IW_SCAN_ALL_MODE 0x0010/* Scan all Modes */
405 #define IW_SCAN_THIS_MODE 0x0020/* Scan only this Mode */
406 #define IW_SCAN_ALL_RATE 0x0040/* Scan all Bit-Rates */
407 #define IW_SCAN_THIS_RATE 0x0080/* Scan only this Bit-Rate */
408/* Maximum size of returned data */
409 #define IW_SCAN_MAX_DATA 4096/* In bytes */
410
411/* Max number of char in custom event - use multiple of them if needed */
412 #define IW_CUSTOM_MAX 256/* In bytes */
413
414/****************************** TYPES ******************************/
415
416/* --------------------------- SUBTYPES --------------------------- */
417/*
418 *Generic format for most parameters that fit in an int
419 */
420 structiw_param
421{
422 __s32 value; /* The value of the parameter itself */
423 __u8 fixed; /* Hardware should not use auto select */
424 __u8 disabled;/* Disable the feature */
425 __u16 flags; /* Various specifc flags (if any) */
426};
427
428/*
429 *For all data larger than 16 octets, we need to use a
430 *pointer to memory allocated in user space.
431 */
432 structiw_point
433{
434 caddr_t pointer;/* Pointer to the data (in user space) */
435 __u16 length; /* number of fields or size in bytes */
436 __u16 flags; /* Optional params */
437};
438
439/*
440 *A frequency
441 *For numbers lower than 10^9, we encode the number in 'm' and
442 *set 'e' to 0
443 *For number greater than 10^9, we divide it by the lowest power
444 *of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
445 *The power of 10 is in 'e', the result of the division is in 'm'.
446 */
447 structiw_freq
448{
449 __s32 m; /* Mantissa */
450 __s16 e; /* Exponent */
451 __u8 i; /* List index (when in range struct) */
452 __u8 pad; /* Unused - just for alignement */
453};
454
455/*
456 *Quality of the link
457 */
458 structiw_quality
459{
460 __u8 qual; /* link quality (%retries, SNR,
461 %missed beacons or better...) */
462 __u8 level; /* signal level (dBm) */
463 __u8 noise; /* noise level (dBm) */
464 __u8 updated;/* Flags to know if updated */
465};
466
467/*
468 *Packet discarded in the wireless adapter due to
469 *"wireless" specific problems...
470 *Note : the list of counter and statistics in net_device_stats
471 *is already pretty exhaustive, and you should use that first.
472 *This is only additional stats...
473 */
474 structiw_discarded
475{
476 __u32 nwid; /* Rx : Wrong nwid/essid */
477 __u32 code; /* Rx : Unable to code/decode (WEP) */
478 __u32 fragment;/* Rx : Can't perform MAC reassembly */
479 __u32 retries;/* Tx : Max MAC retries num reached */
480 __u32 misc; /* Others cases */
481};
482
483/*
484 *Packet/Time period missed in the wireless adapter due to
485 *"wireless" specific problems...
486 */
487 structiw_missed
488{
489 __u32 beacon; /* Missed beacons/superframe */
490};
491
492/* ------------------------ WIRELESS STATS ------------------------ */
493/*
494 * Wireless statistics (used for /proc/net/wireless)
495 */
496 structiw_statistics
497{
498 __u16 status; /* Status
499 * - device dependent for now */
500
501 struct iw_quality qual; /* Quality of the link
502 * (instant/mean/max) */
503 struct iw_discarded discard;/* Packet discarded counts */
504 struct iw_missed miss; /* Packet missed counts */
505};
506
507/* ------------------------ IOCTL REQUEST ------------------------ */
508/*
509 * This structure defines the payload of an ioctl, and is used
510 * below.
511 *
512 * Note that this structure should fit on the memory footprint
513 * of iwreq (which is the same as ifreq), which mean a max size of
514 * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
515 * You should check this when increasing the structures defined
516 * above in this file...
517 */
518 unioniwreq_data
519{
520 /* Config - generic */
521 char name[IFNAMSIZ];
522 /* Name : used to verify the presence of wireless extensions.
523 * Name of the protocol/provider... */
524
525 struct iw_point essid; /* Extended network name */
526 struct iw_param nwid; /* network id (or domain - the cell) */
527 struct iw_freq freq; /* frequency or channel :
528 * 0-1000 = channel
529 * > 1000 = frequency in Hz */
530
531 struct iw_param sens; /* signal level threshold */
532 struct iw_param bitrate;/* default bit rate */
533 struct iw_param txpower;/* default transmit power */
534 struct iw_param rts; /* RTS threshold threshold */
535 struct iw_param frag; /* Fragmentation threshold */
536 __u32 mode; /* Operation mode */
537 struct iw_param retry; /* Retry limits & lifetime */
538
539 struct iw_point encoding;/* Encoding stuff : tokens */
540 struct iw_param power; /* PM duration/timeout */
541 struct iw_quality qual; /* Quality part of statistics */
542
543 struct sockaddr ap_addr;/* Access point address */
544 struct sockaddr addr; /* Destination address (hw) */
545
546 struct iw_param param; /* Other small parameters */
547 struct iw_point data; /* Other large parameters */
548};
549
550/*
551 * The structure to exchange data for ioctl.
552 * This structure is the same as 'struct ifreq', but (re)defined for
553 * convenience...
554 * Do I need to remind you about structure size (32 octets) ?
555 */
556 structiwreq
557{
558 union
559 {
560 char ifrn_name[IFNAMSIZ];/* if name, e.g. "eth0" */
561 } ifr_ifrn;
562
563 /* Data part (defined just above) */
564 union iwreq_datau;
565};
566
567/* -------------------------- IOCTL DATA -------------------------- */
568/*
569 *For those ioctl which want to exchange mode data that what could
570 *fit in the above structure...
571 */
572
573/*
574 *Range of parameters
575 */
576
577 structiw_range
578{
579 /* Informative stuff (to choose between different interface) */
580 __u32 throughput;/* To give an idea... */
581 /* In theory this value should be the maximum benchmarked
582 * TCP/IP throughput, because with most of these devices the
583 * bit rate is meaningless (overhead an co) to estimate how
584 * fast the connection will go and pick the fastest one.
585 * I suggest people to play with Netperf or any benchmark...
586 */
587
588 /* NWID (or domain id) */
589 __u32 min_nwid;/* Minimal NWID we are able to set */
590 __u32 max_nwid;/* Maximal NWID we are able to set */
591
592 /* Frequency */
593 __u16 num_channels;/* Number of channels [0; num - 1] */
594 __u8 num_frequency;/* Number of entry in the list */
595 struct iw_freq freq[IW_MAX_FREQUENCIES];/* list */
596 /* Note : this frequency list doesn't need to fit channel numbers */
597
598 /* signal level threshold range */
599 __s32sensitivity;
600
601 /* Quality of link & SNR stuff */
602 struct iw_quality max_qual;/* Quality of the link */
603
604 /* Rates */
605 __u8 num_bitrates;/* Number of entries in the list */
606 __s32 bitrate[IW_MAX_BITRATES];/* list, in bps */
607
608 /* RTS threshold */
609 __s32 min_rts;/* Minimal RTS threshold */
610 __s32 max_rts;/* Maximal RTS threshold */
611
612 /* Frag threshold */
613 __s32 min_frag;/* Minimal frag threshold */
614 __s32 max_frag;/* Maximal frag threshold */
615
616 /* Power Management duration & timeout */
617 __s32 min_pmp;/* Minimal PM period */
618 __s32 max_pmp;/* Maximal PM period */
619 __s32 min_pmt;/* Minimal PM timeout */
620 __s32 max_pmt;/* Maximal PM timeout */
621 __u16 pmp_flags;/* How to decode max/min PM period */
622 __u16 pmt_flags;/* How to decode max/min PM timeout */
623 __u16 pm_capa;/* What PM options are supported */
624
625 /* Encoder stuff */
626 __u16 encoding_size[IW_MAX_ENCODING_SIZES];/* Different token sizes */
627 __u8 num_encoding_sizes;/* Number of entry in the list */
628 __u8 max_encoding_tokens;/* Max number of tokens */
629
630 /* Transmit power */
631 __u16 txpower_capa;/* What options are supported */
632 __u8 num_txpower;/* Number of entries in the list */
633 __s32 txpower[IW_MAX_TXPOWER];/* list, in bps */
634
635 /* Wireless Extension version info */
636 __u8 we_version_compiled;/* Must be WIRELESS_EXT */
637 __u8 we_version_source;/* Last update of source */
638
639 /* Retry limits and lifetime */
640 __u16 retry_capa;/* What retry options are supported */
641 __u16 retry_flags;/* How to decode max/min retry limit */
642 __u16 r_time_flags;/* How to decode max/min retry life */
643 __s32 min_retry;/* Minimal number of retries */
644 __s32 max_retry;/* Maximal number of retries */
645 __s32 min_r_time;/* Minimal retry lifetime */
646 __s32 max_r_time;/* Maximal retry lifetime */
647
648 /* Average quality of link & SNR */
649 struct iw_quality avg_qual;/* Quality of the link */
650 /* This should contain the average/typical values of the quality
651 * indicator. This should be the threshold between a "good" and
652 * a "bad" link (example : monitor going from green to orange).
653 * Currently, user space apps like quality monitors don't have any
654 * way to calibrate the measurement. With this, they can split
655 * the range between 0 and max_qual in different quality level
656 * (using a geometric subdivision centered on the average).
657 * I expect that people doing the user space apps will feedback
658 * us on which value we need to put in each driver...
659 */
660};
661
662/*
663 * Private ioctl interface information
664 */
665
666 structiw_priv_args
667{
668 __u32 cmd; /* Number of the ioctl to issue */
669 __u16 set_args;/* Type and number of args */
670 __u16 get_args;/* Type and number of args */
671 char name[IFNAMSIZ];/* Name of the extension */
672};
673
674/* ----------------------- WIRELESS EVENTS ----------------------- */
675/*
676 * Wireless events are carried through the rtnetlink socket to user
677 * space. They are encapsulated in the IFLA_WIRELESS field of
678 * a RTM_NEWLINK message.
679 */
680
681/*
682 * A Wireless Event. Contains basically the same data as the ioctl...
683 */
684struct iw_event
685{
686 __u16 len; /* Real lenght of this stuff */
687 __u16 cmd; /* Wireless IOCTL */
688 union iwreq_data u; /* IOCTL fixed payload */
689};
690
691/* Size of the Event prefix (including padding and alignement junk) */
692 #define IW_EV_LCP_LEN(sizeof(struct iw_event) - sizeof(union iwreq_data))
693/* Size of the various events */
694 #define IW_EV_CHAR_LEN(IW_EV_LCP_LEN + IFNAMSIZ)
695 #define IW_EV_UINT_LEN(IW_EV_LCP_LEN + sizeof(__u32))
696 #define IW_EV_FREQ_LEN(IW_EV_LCP_LEN + sizeof(struct iw_freq))
697 #define IW_EV_POINT_LEN(IW_EV_LCP_LEN + sizeof(struct iw_point))
698 #define IW_EV_PARAM_LEN(IW_EV_LCP_LEN + sizeof(struct iw_param))
699 #define IW_EV_ADDR_LEN(IW_EV_LCP_LEN + sizeof(struct sockaddr))
700 #define IW_EV_QUAL_LEN(IW_EV_LCP_LEN + sizeof(struct iw_quality))
701
702/* Note : in the case of iw_point, the extra data will come at the
703 * end of the event */
704
705 #endif/* _LINUX_WIRELESS_H */