| -rw-r--r-- | libopie2/opienet/onetwork.h | 31 | ||||
| -rw-r--r-- | libopie2/opienet/ostation.cpp | 2 | ||||
| -rw-r--r-- | libopie2/opienet/wireless.15.h | 705 | ||||
| -rw-r--r-- | libopie2/opienet/wireless.16.h | 740 |
4 files changed, 10 insertions, 1468 deletions
diff --git a/libopie2/opienet/onetwork.h b/libopie2/opienet/onetwork.h index a49c8fb..057b1a0 100644 --- a/libopie2/opienet/onetwork.h +++ b/libopie2/opienet/onetwork.h @@ -1,452 +1,439 @@ /* This file is part of the Opie Project Copyright (C) 2003-2004 by Michael 'Mickey' Lauer =. <mickey@Vanille.de> .=l. .>+-= _;:, .> :=|. This program is free software; you can .> <`_, > . <= redistribute it and/or modify it under :`=1 )Y*s>-.-- : the terms of the GNU Library General Public .="- .-=="i, .._ License as published by the Free Software - . .-<_> .<> Foundation; either version 2 of the License, ._= =} : or (at your option) any later version. .%`+i> _;_. .i_,=:_. -<s. This program is distributed in the hope that + . -:. = it will be useful, but WITHOUT ANY WARRANTY; : .. .:, . . . without even the implied warranty of =_ + =;=|` MERCHANTABILITY or FITNESS FOR A _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU ..}^=.= = ; Library General Public License for more ++= -. .` .: details. : = ...= . :.=- -. .:....=;==+<; You should have received a copy of the GNU -_. . . )=. = Library General Public License along with -- :-=` this library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef ONETWORK_H #define ONETWORK_H -#if !defined( OPIE_WE_VERSION ) - #warning No wireless extension specified; autodetecting... - #include <linux/version.h> - #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) - #define OPIE_WE_VERSION 15 - #else - #define OPIE_WE_VERSION 16 - #endif // LINUX_VERSION_CODE < KERNEL_VERSION(2.4.23) -#endif // !defined( OPIE_WE_VERSION ) - -#if OPIE_WE_VERSION == 15 -#include "wireless.15.h" -#warning Using WE V15 -#endif -#if OPIE_WE_VERSION == 16 -#include "wireless.16.h" -#warning Using WE V16 -#endif - /* OPIE */ - #include <opie2/onetutils.h> #include <opie2/ostation.h> /* QT */ - #include <qvaluelist.h> #include <qdict.h> #include <qmap.h> #include <qobject.h> #include <qhostaddress.h> +/* STD */ +// hacky workaround until we have a user space wireless.h +#include <net/if.h> +#define _LINUX_IF_H +#include <linux/wireless.h> +#ifndef IW_MAX_PRIV_DEF +#define IW_MAX_PRIV_DEF 128 +#endif + namespace Opie { namespace Net { - class ONetworkInterface; class OWirelessNetworkInterface; class OChannelHopper; class OMonitoringInterface; /*====================================================================================== * ONetwork *======================================================================================*/ /** * @brief A container class for all network interfaces * * This class provides access to all available network interfaces of your computer. * * @author Michael 'Mickey' Lauer <mickey@vanille.de> */ class ONetwork : public QObject { Q_OBJECT public: typedef QDict<ONetworkInterface> InterfaceMap; typedef QDictIterator<ONetworkInterface> InterfaceIterator; public: /** * @returns the number of available interfaces */ int count() const; /** * @returns a pointer to the (one and only) @ref ONetwork instance. */ static ONetwork* instance(); /** * @returns an iterator usable for iterating through all network interfaces. */ InterfaceIterator iterator() const; /** * @returns true, if the @a interface is present. */ bool isPresent( const char* interface ) const; /** * @returns true, if the @a interface supports the wireless extension protocol. */ bool isWirelessInterface( const char* interface ) const; /** * @returns a pointer to the @ref ONetworkInterface object for the specified @a interface or 0, if not found. * @see ONetworkInterface */ ONetworkInterface* interface( const QString& interface ) const; /** * @internal Rebuild the internal interface database * @note Sometimes it might be useful to call this from client code, * e.g. after issuing a cardctl insert */ void synchronize(); /** * @returns the wireless extension version used at compile time. **/ static short wirelessExtensionCompileVersion(); protected: ONetwork(); private: static ONetwork* _instance; InterfaceMap _interfaces; class Private; Private *d; }; /*====================================================================================== * ONetworkInterface *======================================================================================*/ /** * @brief A network interface wrapper. * * This class provides a wrapper for a network interface. All the cumbersume details of * Linux ioctls are hidden under a convenient high-level interface. * @warning Most of the setting methods contained in this class require the appropriate * process permissions to work. * * @author Michael 'Mickey' Lauer <mickey@vanille.de> */ class ONetworkInterface : public QObject { friend class OMonitoringInterface; friend class OCiscoMonitoringInterface; friend class OWlanNGMonitoringInterface; friend class OHostAPMonitoringInterface; friend class OOrinocoMonitoringInterface; public: /** * Constructor. Normally you don't create @ref ONetworkInterface objects yourself, * but access them via @ref ONetwork::interface(). */ ONetworkInterface( QObject* parent, const char* name ); /** * Destructor. */ virtual ~ONetworkInterface(); /** * Associates a @a monitoring interface with this network interface. * @note This is currently only useful with @ref OWirelessNetworkInterface objects. */ void setMonitoring( OMonitoringInterface* monitoring ); /** * @returns the currently associated monitoring interface or 0, if no monitoring is associated. */ OMonitoringInterface* monitoring() const; /** * Setting an interface to promiscuous mode enables the device to receive * all packets on the shared medium - as opposed to packets which are addressed to this interface. */ bool setPromiscuousMode( bool ); /** * @returns true if the interface is set to promiscuous mode. */ bool promiscuousMode() const; /** * Setting an interface to up enables it to receive packets. */ bool setUp( bool ); /** * @returns true if the interface is up. */ bool isUp() const; /** * @returns true if the interface is a loopback interface. */ bool isLoopback() const; /** * @returns true if the interface is featuring supports the wireless extension protocol. */ bool isWireless() const; /** * Associate the IP address @ addr with the interface. */ void setIPV4Address( const QHostAddress& addr ); /** * @returns the IPv4 address associated with the interface. */ QString ipV4Address() const; //TODO: make this return an OHostAddress /** * Associate the MAC address @a addr with the interface. * @note It can be necessary to shut down the interface prior to calling this method. * @warning This is not supported by all drivers. */ void setMacAddress( const OMacAddress& addr ); /** * @returns the MAC address associated with the interface. */ OMacAddress macAddress() const; /** * Associate the IPv4 @a netmask with the interface. */ void setIPV4Netmask( const QHostAddress& netmask ); /** * @returns the IPv4 netmask associated with the interface. */ QString ipV4Netmask() const; //TODO: make this return an OHostAddress /** * @returns the data link type currently associated with the interface. * @see #include <net/if_arp.h> for possible values. */ int dataLinkType() const; protected: const int _sfd; mutable ifreq _ifr; OMonitoringInterface* _mon; protected: struct ifreq& ifr() const; virtual void init(); bool ioctl( int call ) const; bool ioctl( int call, struct ifreq& ) const; private: class Private; Private *d; }; /*====================================================================================== * OChannelHopper *======================================================================================*/ /** * @brief A radio frequency channel hopper. * * This class provides a channel hopper for radio frequencies. A channel hopper frequently * changes the radio frequency channel of its associated @ref OWirelessNetworkInterface. * This is necessary when in monitoring mode and scanning for other devices, because * the radio frequency hardware can only detect packets sent on the same frequency. * * @author Michael 'Mickey' Lauer <mickey@vanille.de> */ class OChannelHopper : public QObject { Q_OBJECT public: /** * Constructor. */ OChannelHopper( OWirelessNetworkInterface* ); /** * Destructor. */ virtual ~OChannelHopper(); /** * @returns true, if the channel hopper is hopping channels */ bool isActive() const; /** * @returns the last hopped channel */ int channel() const; /** * Set the channel hopping @a interval. * An interval of 0 deactivates the channel hopper. */ void setInterval( int interval ); /** * @returns the channel hopping interval */ int interval() const; signals: /** * This signal is emitted right after the channel hopper performed a hop */ void hopped( int ); protected: virtual void timerEvent( QTimerEvent* ); private: OWirelessNetworkInterface* _iface; int _interval; int _tid; QValueList<int> _channels; QValueList<int>::Iterator _channel; class Private; Private *d; }; /*====================================================================================== * OWirelessNetworkInterface *======================================================================================*/ /** * @brief A network interface wrapper for interfaces supporting the wireless extensions protocol. * * This class provides a high-level encapsulation of the Linux wireless extension API. * * @author Michael 'Mickey' Lauer <mickey@vanille.de> */ class OWirelessNetworkInterface : public ONetworkInterface { friend class OMonitoringInterface; friend class OCiscoMonitoringInterface; friend class OWlanNGMonitoringInterface; friend class OHostAPMonitoringInterface; friend class OOrinocoMonitoringInterface; friend class OPrivateIOCTL; public: /** * Constructor. */ OWirelessNetworkInterface( QObject* parent, const char* name ); /** * Destructor. */ virtual ~OWirelessNetworkInterface(); /** * Setting the @a channel of the interface changes the radio frequency (RF) * of the corresponding wireless network device. * @note Common channel range is within [1-14]. A value of 0 is not allowed. * @see channels() */ virtual void setChannel( int channel ) const; /** * @returns the channel index of the current radio frequency. */ virtual int channel() const; /** * @returns the current radio frequency (in MHz). */ virtual double frequency() const; /** * @returns the number of radio frequency channels for the * corresponding wireless network device. * @note European devices usually have 14 channels, while American typically feature 11 channels. */ virtual int channels() const; /** * Set the IEEE 802.11 operation @a mode. * Valid values are <ul><li>adhoc<li>managed<li>monitor<li>master * @warning Not all drivers support the all modes. * @note You might have to change the SSID to get the operation mode change into effect. */ virtual void setMode( const QString& mode ); /** * @returns the current IEEE 802.11 operation mode. * Possible values are <ul><li>adhoc<li>managed<li>monitor<li>master or <li>unknown * * @note: Important note concerning the 'monitor' mode: * Setting the monitor mode on a wireless network interface enables * listening to IEEE 802.11 data and management frames which normally * are handled by the device firmware. This can be used to detect * other wireless network devices, e.g. Access Points or Ad-hoc stations. * @warning Standard wireless network drives don't support the monitor mode. * @warning You need a patched driver for this to work. * @note Enabling the monitor mode is highly driver dependent and requires * the proper @ref OMonitoringInterface to be associated with the interface. * @see OMonitoringInterface */ virtual QString mode() const; /** * Set the channel hopping @a interval. An @a interval of 0 disables channel hopping. * @see OChannelHopper */ virtual void setChannelHopping( int interval = 0 ); /** * @returns the channel hopping interval or 0, if channel hopping is disabled. */ virtual int channelHopping() const; /** * @returns the @ref OChannelHopper of this interface or 0, if channel hopping has not been activated before */ virtual OChannelHopper* channelHopper() const; /** * Set the station @a nickname. */ virtual void setNickName( const QString& nickname ); /** * @returns the current station nickname. */ virtual QString nickName() const; /** * Invoke the private IOCTL @a command with a @number of parameters on the network interface. * @see OPrivateIOCTL */ virtual void setPrivate( const QString& command, int number, ... ); /** * @returns true if the interface is featuring the private IOCTL @command. */ virtual bool hasPrivate( const QString& command ); virtual void getPrivate( const QString& command ); //FIXME: Implement and document this /** * @returns true if the interface is associated to an access point * @note: This information is only valid if the interface is in managed mode. */ virtual bool isAssociated() const; /** * @returns the MAC address of the Access Point if the device is in infrastructure mode. * @returns a (more or less random) cell ID address if the device is in adhoc mode. */ virtual OMacAddress associatedAP() const; /** * Set the @a ssid (Service Set ID) string. This is used to decide * which network to associate with (use "any" to let the driver decide). */ virtual void setSSID( const QString& ssid ); /** * @returns the current SSID (Service Set ID). */ virtual QString SSID() const; /** * Perform scanning the wireless network neighbourhood. * @note: UNSTABLE API - UNDER CONSTRUCTION - DON'T USE! */ virtual OStationList* scanNetwork(); /** * @return signal strength to associated neighbour (in percent). * In infrastructure mode, this is the signal strength of the Access Point. * In other modes the result is driver dependent. */ diff --git a/libopie2/opienet/ostation.cpp b/libopie2/opienet/ostation.cpp index 140b924..ce0995b 100644 --- a/libopie2/opienet/ostation.cpp +++ b/libopie2/opienet/ostation.cpp @@ -1,72 +1,72 @@ /* This file is part of the Opie Project Copyright (C) 2003 by Michael 'Mickey' Lauer <mickey@Vanille.de> =. .=l. .>+-= _;:, .> :=|. This program is free software; you can .> <`_, > . <= redistribute it and/or modify it under :`=1 )Y*s>-.-- : the terms of the GNU Library General Public .="- .-=="i, .._ License as published by the Free Software - . .-<_> .<> Foundation; either version 2 of the License, ._= =} : or (at your option) any later version. .%`+i> _;_. .i_,=:_. -<s. This program is distributed in the hope that + . -:. = it will be useful, but WITHOUT ANY WARRANTY; : .. .:, . . . without even the implied warranty of =_ + =;=|` MERCHANTABILITY or FITNESS FOR A _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU ..}^=.= = ; Library General Public License for more ++= -. .` .: details. : = ...= . :.=- -. .:....=;==+<; You should have received a copy of the GNU -_. . . )=. = Library General Public License along with -- :-=` this library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <opie2/ostation.h> #include <opie2/odebug.h> using namespace Opie::Core; namespace Opie { namespace Net { /*====================================================================================== * OStation *======================================================================================*/ OStation::OStation() { odebug << "OStation::OStation()" << oendl; type = "<unknown>"; macAddress = OMacAddress::unknown; ssid = "<unknown>"; channel = 0; apAddress = OMacAddress::unknown; } OStation::~OStation() { odebug << "OStation::~OStation()" << oendl; } void OStation::dump() { odebug << "------- OStation::dump() ------------" << oendl; qDebug( "type: %s", (const char*) type ); qDebug( "mac: %s", (const char*) macAddress.toString() ); qDebug( "ap: %s", (const char*) apAddress.toString() ); qDebug( "ip: %s", (const char*) ipAddress.toString() ); } } -}
\ No newline at end of file +} diff --git a/libopie2/opienet/wireless.15.h b/libopie2/opienet/wireless.15.h deleted file mode 100644 index 8135e97..0000000 --- a/libopie2/opienet/wireless.15.h +++ b/dev/null @@ -1,705 +0,0 @@ -/* - * This file define a set of standard wireless extensions - * - * Version : 15 12.7.02 - * - * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> - * Copyright (c) 1997-2002 Jean Tourrilhes, All Rights Reserved. - */ - -#ifndef _LINUX_WIRELESS_H -#define _LINUX_WIRELESS_H - -/************************** DOCUMENTATION **************************/ -/* - * Initial APIs (1996 -> onward) : - * ----------------------------- - * Basically, the wireless extensions are for now a set of standard ioctl - * call + /proc/net/wireless - * - * The entry /proc/net/wireless give statistics and information on the - * driver. - * This is better than having each driver having its entry because - * its centralised and we may remove the driver module safely. - * - * Ioctl are used to configure the driver and issue commands. This is - * better than command line options of insmod because we may want to - * change dynamically (while the driver is running) some parameters. - * - * The ioctl mechanimsm are copied from standard devices ioctl. - * We have the list of command plus a structure descibing the - * data exchanged... - * Note that to add these ioctl, I was obliged to modify : - * # net/core/dev.c (two place + add include) - * # net/ipv4/af_inet.c (one place + add include) - * - * /proc/net/wireless is a copy of /proc/net/dev. - * We have a structure for data passed from the driver to /proc/net/wireless - * Too add this, I've modified : - * # net/core/dev.c (two other places) - * # include/linux/netdevice.h (one place) - * # include/linux/proc_fs.h (one place) - * - * New driver API (2002 -> onward) : - * ------------------------------- - * This file is only concerned with the user space API and common definitions. - * The new driver API is defined and documented in : - * # include/net/iw_handler.h - * - * Note as well that /proc/net/wireless implementation has now moved in : - * # include/linux/wireless.c - * - * Wireless Events (2002 -> onward) : - * -------------------------------- - * Events are defined at the end of this file, and implemented in : - * # include/linux/wireless.c - * - * Other comments : - * -------------- - * Do not add here things that are redundant with other mechanisms - * (drivers init, ifconfig, /proc/net/dev, ...) and with are not - * wireless specific. - * - * These wireless extensions are not magic : each driver has to provide - * support for them... - * - * IMPORTANT NOTE : As everything in the kernel, this is very much a - * work in progress. Contact me if you have ideas of improvements... - */ - -/***************************** INCLUDES *****************************/ - -#include <sys/types.h> -#include <net/if.h> -#include <linux/types.h> - -#ifndef IFNAMSIZ -#define IFNAMSIZ 16 -#endif -#ifndef IW_MAX_PRIV_DEF -#define IW_MAX_PRIV_DEF 128 -#endif - -/***************************** VERSION *****************************/ -/* - * This constant is used to know the availability of the wireless - * extensions and to know which version of wireless extensions it is - * (there is some stuff that will be added in the future...) - * I just plan to increment with each new version. - */ -#define WIRELESS_EXT 15 - -/* - * Changes : - * - * V2 to V3 - * -------- - * Alan Cox start some incompatibles changes. I've integrated a bit more. - * - Encryption renamed to Encode to avoid US regulation problems - * - Frequency changed from float to struct to avoid problems on old 386 - * - * V3 to V4 - * -------- - * - Add sensitivity - * - * V4 to V5 - * -------- - * - Missing encoding definitions in range - * - Access points stuff - * - * V5 to V6 - * -------- - * - 802.11 support (ESSID ioctls) - * - * V6 to V7 - * -------- - * - define IW_ESSID_MAX_SIZE and IW_MAX_AP - * - * V7 to V8 - * -------- - * - Changed my e-mail address - * - More 802.11 support (nickname, rate, rts, frag) - * - List index in frequencies - * - * V8 to V9 - * -------- - * - Support for 'mode of operation' (ad-hoc, managed...) - * - Support for unicast and multicast power saving - * - Change encoding to support larger tokens (>64 bits) - * - Updated iw_params (disable, flags) and use it for NWID - * - Extracted iw_point from iwreq for clarity - * - * V9 to V10 - * --------- - * - Add PM capability to range structure - * - Add PM modifier : MAX/MIN/RELATIVE - * - Add encoding option : IW_ENCODE_NOKEY - * - Add TxPower ioctls (work like TxRate) - * - * V10 to V11 - * ---------- - * - Add WE version in range (help backward/forward compatibility) - * - Add retry ioctls (work like PM) - * - * V11 to V12 - * ---------- - * - Add SIOCSIWSTATS to get /proc/net/wireless programatically - * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space - * - Add new statistics (frag, retry, beacon) - * - Add average quality (for user space calibration) - * - * V12 to V13 - * ---------- - * - Document creation of new driver API. - * - Extract union iwreq_data from struct iwreq (for new driver API). - * - Rename SIOCSIWNAME as SIOCSIWCOMMIT - * - * V13 to V14 - * ---------- - * - Wireless Events support : define struct iw_event - * - Define additional specific event numbers - * - Add "addr" and "param" fields in union iwreq_data - * - AP scanning stuff (SIOCSIWSCAN and friends) - * - * V14 to V15 - * ---------- - * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg - * - Make struct iw_freq signed (both m & e), add explicit padding - * - Add IWEVCUSTOM for driver specific event/scanning token - * - Add IW_MAX_GET_SPY for driver returning a lot of addresses - * - Add IW_TXPOW_RANGE for range of Tx Powers - * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points - * - Add IW_MODE_MONITOR for passive monitor - */ - -/**************************** CONSTANTS ****************************/ - -/* -------------------------- IOCTL LIST -------------------------- */ - -/* Wireless Identification */ -#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ -#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ -/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. - * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... - * Don't put the name of your driver there, it's useless. */ - -/* Basic operations */ -#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ -#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ -#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ -#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ -#define SIOCSIWMODE 0x8B06 /* set operation mode */ -#define SIOCGIWMODE 0x8B07 /* get operation mode */ -#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ -#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ - -/* Informative stuff */ -#define SIOCSIWRANGE 0x8B0A /* Unused */ -#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ -#define SIOCSIWPRIV 0x8B0C /* Unused */ -#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ -#define SIOCSIWSTATS 0x8B0E /* Unused */ -#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ -/* SIOCGIWSTATS is strictly used between user space and the kernel, and - * is never passed to the driver (i.e. the driver will never see it). */ - -/* Mobile IP support (statistics per MAC address) */ -#define SIOCSIWSPY 0x8B10 /* set spy addresses */ -#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ - -/* Access Point manipulation */ -#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ -#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ -#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ -#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ -#define SIOCGIWSCAN 0x8B19 /* get scanning results */ - -/* 802.11 specific support */ -#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ -#define SIOCGIWESSID 0x8B1B /* get ESSID */ -#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ -#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ -/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit - * within the 'iwreq' structure, so we need to use the 'data' member to - * point to a string in user space, like it is done for RANGE... */ - -/* Other parameters useful in 802.11 and some other devices */ -#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ -#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ -#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ -#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ -#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ -#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ -#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ -#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ -#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ -#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ - -/* Encoding stuff (scrambling, hardware security, WEP...) */ -#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ -#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ -/* Power saving stuff (power management, unicast and multicast) */ -#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ -#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ - -/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ - -/* These 16 ioctl are wireless device private. - * Each driver is free to use them for whatever purpose it chooses, - * however the driver *must* export the description of those ioctls - * with SIOCGIWPRIV and *must* use arguments as defined below. - * If you don't follow those rules, DaveM is going to hate you (reason : - * it make mixed 32/64bit operation impossible). - */ -#define SIOCIWFIRSTPRIV 0x8BE0 -#define SIOCIWLASTPRIV 0x8BFF -/* Previously, we were using SIOCDEVPRIVATE, but we now have our - * separate range because of collisions with other tools such as - * 'mii-tool'. - * We now have 32 commands, so a bit more space ;-). - * Also, all 'odd' commands are only usable by root and don't return the - * content of ifr/iwr to user (but you are not obliged to use the set/get - * convention, just use every other two command). - * And I repeat : you are not obliged to use them with iwspy, but you - * must be compliant with it. - */ - -/* ------------------------- IOCTL STUFF ------------------------- */ - -/* The first and the last (range) */ -#define SIOCIWFIRST 0x8B00 -#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ - -/* Even : get (world access), odd : set (root access) */ -#define IW_IS_SET(cmd) (!((cmd) & 0x1)) -#define IW_IS_GET(cmd) ((cmd) & 0x1) - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* Those are *NOT* ioctls, do not issue request on them !!! */ -/* Most events use the same identifier as ioctl requests */ - -#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ -#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ -#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ -#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ -#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ - -#define IWEVFIRST 0x8C00 - -/* ------------------------- PRIVATE INFO ------------------------- */ -/* - * The following is used with SIOCGIWPRIV. It allow a driver to define - * the interface (name, type of data) for its private ioctl. - * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV - */ - -#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ -#define IW_PRIV_TYPE_NONE 0x0000 -#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ -#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ -#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ -#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ -#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ - -#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed nuber of args */ - -#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ - -/* - * Note : if the number of args is fixed and the size < 16 octets, - * instead of passing a pointer we will put args in the iwreq struct... - */ - -/* ----------------------- OTHER CONSTANTS ----------------------- */ - -/* Maximum frequencies in the range struct */ -#define IW_MAX_FREQUENCIES 16 -/* Note : if you have something like 80 frequencies, - * don't increase this constant and don't fill the frequency list. - * The user will be able to set by channel anyway... */ - -/* Maximum bit rates in the range struct */ -#define IW_MAX_BITRATES 8 - -/* Maximum tx powers in the range struct */ -#define IW_MAX_TXPOWER 8 -/* Note : if you more than 8 TXPowers, just set the max and min or - * a few of them in the struct iw_range. */ - -/* Maximum of address that you may set with SPY */ -#define IW_MAX_SPY 8 /* set */ -#define IW_MAX_GET_SPY 64 /* get */ - -/* Maximum of address that you may get in the - list of access points in range */ -#define IW_MAX_AP 64 - -/* Maximum size of the ESSID and NICKN strings */ -#define IW_ESSID_MAX_SIZE 32 - -/* Modes of operation */ -#define IW_MODE_AUTO 0 /* Let the driver decides */ -#define IW_MODE_ADHOC 1 /* Single cell network */ -#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ -#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ -#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ -#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ -#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ - -/* Maximum number of size of encoding token available - * they are listed in the range structure */ -#define IW_MAX_ENCODING_SIZES 8 - -/* Maximum size of the encoding token in bytes */ -#define IW_ENCODING_TOKEN_MAX 32 /* 256 bits (for now) */ - -/* Flags for encoding (along with the token) */ -#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ -#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ -#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ -#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ -#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ -#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ -#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ -#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ - -/* Power management flags available (along with the value, if any) */ -#define IW_POWER_ON 0x0000 /* No details... */ -#define IW_POWER_TYPE 0xF000 /* Type of parameter */ -#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ -#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ -#define IW_POWER_MODE 0x0F00 /* Power Management mode */ -#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ -#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ -#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ -#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ -#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ -#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ -#define IW_POWER_MIN 0x0001 /* Value is a minimum */ -#define IW_POWER_MAX 0x0002 /* Value is a maximum */ -#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ - -/* Transmit Power flags available */ -#define IW_TXPOW_TYPE 0x00FF /* Type of value */ -#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ -#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ -#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ - -/* Retry limits and lifetime flags available */ -#define IW_RETRY_ON 0x0000 /* No details... */ -#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ -#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ -#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ -#define IW_RETRY_MODIFIER 0x000F /* Modify a parameter */ -#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ -#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ -#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ - -/* Scanning request flags */ -#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ -#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ -#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ -#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ -#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ -#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ -#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ -#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ -#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ -/* Maximum size of returned data */ -#define IW_SCAN_MAX_DATA 4096 /* In bytes */ - -/* Max number of char in custom event - use multiple of them if needed */ -#define IW_CUSTOM_MAX 256 /* In bytes */ - -/****************************** TYPES ******************************/ - -/* --------------------------- SUBTYPES --------------------------- */ -/* - * Generic format for most parameters that fit in an int - */ -struct iw_param -{ - __s32 value; /* The value of the parameter itself */ - __u8 fixed; /* Hardware should not use auto select */ - __u8 disabled; /* Disable the feature */ - __u16 flags; /* Various specifc flags (if any) */ -}; - -/* - * For all data larger than 16 octets, we need to use a - * pointer to memory allocated in user space. - */ -struct iw_point -{ - caddr_t pointer; /* Pointer to the data (in user space) */ - __u16 length; /* number of fields or size in bytes */ - __u16 flags; /* Optional params */ -}; - -/* - * A frequency - * For numbers lower than 10^9, we encode the number in 'm' and - * set 'e' to 0 - * For number greater than 10^9, we divide it by the lowest power - * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... - * The power of 10 is in 'e', the result of the division is in 'm'. - */ -struct iw_freq -{ - __s32 m; /* Mantissa */ - __s16 e; /* Exponent */ - __u8 i; /* List index (when in range struct) */ - __u8 pad; /* Unused - just for alignement */ -}; - -/* - * Quality of the link - */ -struct iw_quality -{ - __u8 qual; /* link quality (%retries, SNR, - %missed beacons or better...) */ - __u8 level; /* signal level (dBm) */ - __u8 noise; /* noise level (dBm) */ - __u8 updated; /* Flags to know if updated */ -}; - -/* - * Packet discarded in the wireless adapter due to - * "wireless" specific problems... - * Note : the list of counter and statistics in net_device_stats - * is already pretty exhaustive, and you should use that first. - * This is only additional stats... - */ -struct iw_discarded -{ - __u32 nwid; /* Rx : Wrong nwid/essid */ - __u32 code; /* Rx : Unable to code/decode (WEP) */ - __u32 fragment; /* Rx : Can't perform MAC reassembly */ - __u32 retries; /* Tx : Max MAC retries num reached */ - __u32 misc; /* Others cases */ -}; - -/* - * Packet/Time period missed in the wireless adapter due to - * "wireless" specific problems... - */ -struct iw_missed -{ - __u32 beacon; /* Missed beacons/superframe */ -}; - -/* ------------------------ WIRELESS STATS ------------------------ */ -/* - * Wireless statistics (used for /proc/net/wireless) - */ -struct iw_statistics -{ - __u16 status; /* Status - * - device dependent for now */ - - struct iw_quality qual; /* Quality of the link - * (instant/mean/max) */ - struct iw_discarded discard; /* Packet discarded counts */ - struct iw_missed miss; /* Packet missed counts */ -}; - -/* ------------------------ IOCTL REQUEST ------------------------ */ -/* - * This structure defines the payload of an ioctl, and is used - * below. - * - * Note that this structure should fit on the memory footprint - * of iwreq (which is the same as ifreq), which mean a max size of - * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... - * You should check this when increasing the structures defined - * above in this file... - */ -union iwreq_data -{ - /* Config - generic */ - char name[IFNAMSIZ]; - /* Name : used to verify the presence of wireless extensions. - * Name of the protocol/provider... */ - - struct iw_point essid; /* Extended network name */ - struct iw_param nwid; /* network id (or domain - the cell) */ - struct iw_freq freq; /* frequency or channel : - * 0-1000 = channel - * > 1000 = frequency in Hz */ - - struct iw_param sens; /* signal level threshold */ - struct iw_param bitrate; /* default bit rate */ - struct iw_param txpower; /* default transmit power */ - struct iw_param rts; /* RTS threshold threshold */ - struct iw_param frag; /* Fragmentation threshold */ - __u32 mode; /* Operation mode */ - struct iw_param retry; /* Retry limits & lifetime */ - - struct iw_point encoding; /* Encoding stuff : tokens */ - struct iw_param power; /* PM duration/timeout */ - struct iw_quality qual; /* Quality part of statistics */ - - struct sockaddr ap_addr; /* Access point address */ - struct sockaddr addr; /* Destination address (hw) */ - - struct iw_param param; /* Other small parameters */ - struct iw_point data; /* Other large parameters */ -}; - -/* - * The structure to exchange data for ioctl. - * This structure is the same as 'struct ifreq', but (re)defined for - * convenience... - * Do I need to remind you about structure size (32 octets) ? - */ -struct iwreq -{ - union - { - char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ - } ifr_ifrn; - - /* Data part (defined just above) */ - union iwreq_data u; -}; - -/* -------------------------- IOCTL DATA -------------------------- */ -/* - * For those ioctl which want to exchange mode data that what could - * fit in the above structure... - */ - -/* - * Range of parameters - */ - -struct iw_range -{ - /* Informative stuff (to choose between different interface) */ - __u32 throughput; /* To give an idea... */ - /* In theory this value should be the maximum benchmarked - * TCP/IP throughput, because with most of these devices the - * bit rate is meaningless (overhead an co) to estimate how - * fast the connection will go and pick the fastest one. - * I suggest people to play with Netperf or any benchmark... - */ - - /* NWID (or domain id) */ - __u32 min_nwid; /* Minimal NWID we are able to set */ - __u32 max_nwid; /* Maximal NWID we are able to set */ - - /* Frequency */ - __u16 num_channels; /* Number of channels [0; num - 1] */ - __u8 num_frequency; /* Number of entry in the list */ - struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ - /* Note : this frequency list doesn't need to fit channel numbers */ - - /* signal level threshold range */ - __s32 sensitivity; - - /* Quality of link & SNR stuff */ - struct iw_quality max_qual; /* Quality of the link */ - - /* Rates */ - __u8 num_bitrates; /* Number of entries in the list */ - __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ - - /* RTS threshold */ - __s32 min_rts; /* Minimal RTS threshold */ - __s32 max_rts; /* Maximal RTS threshold */ - - /* Frag threshold */ - __s32 min_frag; /* Minimal frag threshold */ - __s32 max_frag; /* Maximal frag threshold */ - - /* Power Management duration & timeout */ - __s32 min_pmp; /* Minimal PM period */ - __s32 max_pmp; /* Maximal PM period */ - __s32 min_pmt; /* Minimal PM timeout */ - __s32 max_pmt; /* Maximal PM timeout */ - __u16 pmp_flags; /* How to decode max/min PM period */ - __u16 pmt_flags; /* How to decode max/min PM timeout */ - __u16 pm_capa; /* What PM options are supported */ - - /* Encoder stuff */ - __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ - __u8 num_encoding_sizes; /* Number of entry in the list */ - __u8 max_encoding_tokens; /* Max number of tokens */ - - /* Transmit power */ - __u16 txpower_capa; /* What options are supported */ - __u8 num_txpower; /* Number of entries in the list */ - __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ - - /* Wireless Extension version info */ - __u8 we_version_compiled; /* Must be WIRELESS_EXT */ - __u8 we_version_source; /* Last update of source */ - - /* Retry limits and lifetime */ - __u16 retry_capa; /* What retry options are supported */ - __u16 retry_flags; /* How to decode max/min retry limit */ - __u16 r_time_flags; /* How to decode max/min retry life */ - __s32 min_retry; /* Minimal number of retries */ - __s32 max_retry; /* Maximal number of retries */ - __s32 min_r_time; /* Minimal retry lifetime */ - __s32 max_r_time; /* Maximal retry lifetime */ - - /* Average quality of link & SNR */ - struct iw_quality avg_qual; /* Quality of the link */ - /* This should contain the average/typical values of the quality - * indicator. This should be the threshold between a "good" and - * a "bad" link (example : monitor going from green to orange). - * Currently, user space apps like quality monitors don't have any - * way to calibrate the measurement. With this, they can split - * the range between 0 and max_qual in different quality level - * (using a geometric subdivision centered on the average). - * I expect that people doing the user space apps will feedback - * us on which value we need to put in each driver... - */ -}; - -/* - * Private ioctl interface information - */ - -struct iw_priv_args -{ - __u32 cmd; /* Number of the ioctl to issue */ - __u16 set_args; /* Type and number of args */ - __u16 get_args; /* Type and number of args */ - char name[IFNAMSIZ]; /* Name of the extension */ -}; - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* - * Wireless events are carried through the rtnetlink socket to user - * space. They are encapsulated in the IFLA_WIRELESS field of - * a RTM_NEWLINK message. - */ - -/* - * A Wireless Event. Contains basically the same data as the ioctl... - */ -struct iw_event -{ - __u16 len; /* Real lenght of this stuff */ - __u16 cmd; /* Wireless IOCTL */ - union iwreq_data u; /* IOCTL fixed payload */ -}; - -/* Size of the Event prefix (including padding and alignement junk) */ -#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) -/* Size of the various events */ -#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) -#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) -#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) -#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point)) -#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) -#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) -#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) - -/* Note : in the case of iw_point, the extra data will come at the - * end of the event */ - -#endif /* _LINUX_WIRELESS_H */ diff --git a/libopie2/opienet/wireless.16.h b/libopie2/opienet/wireless.16.h deleted file mode 100644 index 9a9accd..0000000 --- a/libopie2/opienet/wireless.16.h +++ b/dev/null @@ -1,740 +0,0 @@ -/* - * This file define a set of standard wireless extensions - * - * Version : 16 2.4.03 - * - * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> - * Copyright (c) 1997-2002 Jean Tourrilhes, All Rights Reserved. - */ - -#ifndef _LINUX_WIRELESS_H -#define _LINUX_WIRELESS_H - -/************************** DOCUMENTATION **************************/ -/* - * Initial APIs (1996 -> onward) : - * ----------------------------- - * Basically, the wireless extensions are for now a set of standard ioctl - * call + /proc/net/wireless - * - * The entry /proc/net/wireless give statistics and information on the - * driver. - * This is better than having each driver having its entry because - * its centralised and we may remove the driver module safely. - * - * Ioctl are used to configure the driver and issue commands. This is - * better than command line options of insmod because we may want to - * change dynamically (while the driver is running) some parameters. - * - * The ioctl mechanimsm are copied from standard devices ioctl. - * We have the list of command plus a structure descibing the - * data exchanged... - * Note that to add these ioctl, I was obliged to modify : - * # net/core/dev.c (two place + add include) - * # net/ipv4/af_inet.c (one place + add include) - * - * /proc/net/wireless is a copy of /proc/net/dev. - * We have a structure for data passed from the driver to /proc/net/wireless - * Too add this, I've modified : - * # net/core/dev.c (two other places) - * # include/linux/netdevice.h (one place) - * # include/linux/proc_fs.h (one place) - * - * New driver API (2002 -> onward) : - * ------------------------------- - * This file is only concerned with the user space API and common definitions. - * The new driver API is defined and documented in : - * # include/net/iw_handler.h - * - * Note as well that /proc/net/wireless implementation has now moved in : - * # include/linux/wireless.c - * - * Wireless Events (2002 -> onward) : - * -------------------------------- - * Events are defined at the end of this file, and implemented in : - * # include/linux/wireless.c - * - * Other comments : - * -------------- - * Do not add here things that are redundant with other mechanisms - * (drivers init, ifconfig, /proc/net/dev, ...) and with are not - * wireless specific. - * - * These wireless extensions are not magic : each driver has to provide - * support for them... - * - * IMPORTANT NOTE : As everything in the kernel, this is very much a - * work in progress. Contact me if you have ideas of improvements... - */ - -/***************************** INCLUDES *****************************/ - -/* To minimise problems in user space, I might remove those headers - * at some point. Jean II */ -#include <sys/types.h> -#include <net/if.h> -#include <linux/types.h> - -#ifndef IFNAMSIZ -#define IFNAMSIZ 16 -#endif -#ifndef IW_MAX_PRIV_DEF -#define IW_MAX_PRIV_DEF 128 -#endif - -/***************************** VERSION *****************************/ -/* - * This constant is used to know the availability of the wireless - * extensions and to know which version of wireless extensions it is - * (there is some stuff that will be added in the future...) - * I just plan to increment with each new version. - */ -#define WIRELESS_EXT 16 - -/* - * Changes : - * - * V2 to V3 - * -------- - * Alan Cox start some incompatibles changes. I've integrated a bit more. - * - Encryption renamed to Encode to avoid US regulation problems - * - Frequency changed from float to struct to avoid problems on old 386 - * - * V3 to V4 - * -------- - * - Add sensitivity - * - * V4 to V5 - * -------- - * - Missing encoding definitions in range - * - Access points stuff - * - * V5 to V6 - * -------- - * - 802.11 support (ESSID ioctls) - * - * V6 to V7 - * -------- - * - define IW_ESSID_MAX_SIZE and IW_MAX_AP - * - * V7 to V8 - * -------- - * - Changed my e-mail address - * - More 802.11 support (nickname, rate, rts, frag) - * - List index in frequencies - * - * V8 to V9 - * -------- - * - Support for 'mode of operation' (ad-hoc, managed...) - * - Support for unicast and multicast power saving - * - Change encoding to support larger tokens (>64 bits) - * - Updated iw_params (disable, flags) and use it for NWID - * - Extracted iw_point from iwreq for clarity - * - * V9 to V10 - * --------- - * - Add PM capability to range structure - * - Add PM modifier : MAX/MIN/RELATIVE - * - Add encoding option : IW_ENCODE_NOKEY - * - Add TxPower ioctls (work like TxRate) - * - * V10 to V11 - * ---------- - * - Add WE version in range (help backward/forward compatibility) - * - Add retry ioctls (work like PM) - * - * V11 to V12 - * ---------- - * - Add SIOCSIWSTATS to get /proc/net/wireless programatically - * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space - * - Add new statistics (frag, retry, beacon) - * - Add average quality (for user space calibration) - * - * V12 to V13 - * ---------- - * - Document creation of new driver API. - * - Extract union iwreq_data from struct iwreq (for new driver API). - * - Rename SIOCSIWNAME as SIOCSIWCOMMIT - * - * V13 to V14 - * ---------- - * - Wireless Events support : define struct iw_event - * - Define additional specific event numbers - * - Add "addr" and "param" fields in union iwreq_data - * - AP scanning stuff (SIOCSIWSCAN and friends) - * - * V14 to V15 - * ---------- - * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg - * - Make struct iw_freq signed (both m & e), add explicit padding - * - Add IWEVCUSTOM for driver specific event/scanning token - * - Add IW_MAX_GET_SPY for driver returning a lot of addresses - * - Add IW_TXPOW_RANGE for range of Tx Powers - * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points - * - Add IW_MODE_MONITOR for passive monitor - * - * V15 to V16 - * ---------- - * - Increase the number of bitrates in iw_range to 32 (for 802.11g) - * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) - * - Reshuffle struct iw_range for increases, add filler - * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses - * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support - * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" - * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index - */ - -/**************************** CONSTANTS ****************************/ - -/* -------------------------- IOCTL LIST -------------------------- */ - -/* Wireless Identification */ -#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ -#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ -/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. - * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... - * Don't put the name of your driver there, it's useless. */ - -/* Basic operations */ -#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ -#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ -#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ -#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ -#define SIOCSIWMODE 0x8B06 /* set operation mode */ -#define SIOCGIWMODE 0x8B07 /* get operation mode */ -#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ -#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ - -/* Informative stuff */ -#define SIOCSIWRANGE 0x8B0A /* Unused */ -#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ -#define SIOCSIWPRIV 0x8B0C /* Unused */ -#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ -#define SIOCSIWSTATS 0x8B0E /* Unused */ -#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ -/* SIOCGIWSTATS is strictly used between user space and the kernel, and - * is never passed to the driver (i.e. the driver will never see it). */ - -/* Spy support (statistics per MAC address - used for Mobile IP support) */ -#define SIOCSIWSPY 0x8B10 /* set spy addresses */ -#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ -#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ -#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ - -/* Access Point manipulation */ -#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ -#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ -#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ -#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ -#define SIOCGIWSCAN 0x8B19 /* get scanning results */ - -/* 802.11 specific support */ -#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ -#define SIOCGIWESSID 0x8B1B /* get ESSID */ -#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ -#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ -/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit - * within the 'iwreq' structure, so we need to use the 'data' member to - * point to a string in user space, like it is done for RANGE... */ - -/* Other parameters useful in 802.11 and some other devices */ -#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ -#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ -#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ -#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ -#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ -#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ -#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ -#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ -#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ -#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ - -/* Encoding stuff (scrambling, hardware security, WEP...) */ -#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ -#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ -/* Power saving stuff (power management, unicast and multicast) */ -#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ -#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ - -/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ - -/* These 16 ioctl are wireless device private. - * Each driver is free to use them for whatever purpose it chooses, - * however the driver *must* export the description of those ioctls - * with SIOCGIWPRIV and *must* use arguments as defined below. - * If you don't follow those rules, DaveM is going to hate you (reason : - * it make mixed 32/64bit operation impossible). - */ -#define SIOCIWFIRSTPRIV 0x8BE0 -#define SIOCIWLASTPRIV 0x8BFF -/* Previously, we were using SIOCDEVPRIVATE, but we now have our - * separate range because of collisions with other tools such as - * 'mii-tool'. - * We now have 32 commands, so a bit more space ;-). - * Also, all 'odd' commands are only usable by root and don't return the - * content of ifr/iwr to user (but you are not obliged to use the set/get - * convention, just use every other two command). - * And I repeat : you are not obliged to use them with iwspy, but you - * must be compliant with it. - */ - -/* ------------------------- IOCTL STUFF ------------------------- */ - -/* The first and the last (range) */ -#define SIOCIWFIRST 0x8B00 -#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ - -/* Even : get (world access), odd : set (root access) */ -#define IW_IS_SET(cmd) (!((cmd) & 0x1)) -#define IW_IS_GET(cmd) ((cmd) & 0x1) - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* Those are *NOT* ioctls, do not issue request on them !!! */ -/* Most events use the same identifier as ioctl requests */ - -#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ -#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ -#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ -#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ -#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ - -#define IWEVFIRST 0x8C00 - -/* ------------------------- PRIVATE INFO ------------------------- */ -/* - * The following is used with SIOCGIWPRIV. It allow a driver to define - * the interface (name, type of data) for its private ioctl. - * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV - */ - -#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ -#define IW_PRIV_TYPE_NONE 0x0000 -#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ -#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ -#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ -#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ -#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ - -#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ - -#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ - -/* - * Note : if the number of args is fixed and the size < 16 octets, - * instead of passing a pointer we will put args in the iwreq struct... - */ - -/* ----------------------- OTHER CONSTANTS ----------------------- */ - -/* Maximum frequencies in the range struct */ -#define IW_MAX_FREQUENCIES 32 -/* Note : if you have something like 80 frequencies, - * don't increase this constant and don't fill the frequency list. - * The user will be able to set by channel anyway... */ - -/* Maximum bit rates in the range struct */ -#define IW_MAX_BITRATES 32 - -/* Maximum tx powers in the range struct */ -#define IW_MAX_TXPOWER 8 -/* Note : if you more than 8 TXPowers, just set the max and min or - * a few of them in the struct iw_range. */ - -/* Maximum of address that you may set with SPY */ -#define IW_MAX_SPY 8 - -/* Maximum of address that you may get in the - list of access points in range */ -#define IW_MAX_AP 64 - -/* Maximum size of the ESSID and NICKN strings */ -#define IW_ESSID_MAX_SIZE 32 - -/* Modes of operation */ -#define IW_MODE_AUTO 0 /* Let the driver decides */ -#define IW_MODE_ADHOC 1 /* Single cell network */ -#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ -#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ -#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ -#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ -#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ - -/* Maximum number of size of encoding token available - * they are listed in the range structure */ -#define IW_MAX_ENCODING_SIZES 8 - -/* Maximum size of the encoding token in bytes */ -#define IW_ENCODING_TOKEN_MAX 32 /* 256 bits (for now) */ - -/* Flags for encoding (along with the token) */ -#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ -#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ -#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ -#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ -#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ -#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ -#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ -#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ -#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ - -/* Power management flags available (along with the value, if any) */ -#define IW_POWER_ON 0x0000 /* No details... */ -#define IW_POWER_TYPE 0xF000 /* Type of parameter */ -#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ -#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ -#define IW_POWER_MODE 0x0F00 /* Power Management mode */ -#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ -#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ -#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ -#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ -#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ -#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ -#define IW_POWER_MIN 0x0001 /* Value is a minimum */ -#define IW_POWER_MAX 0x0002 /* Value is a maximum */ -#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ - -/* Transmit Power flags available */ -#define IW_TXPOW_TYPE 0x00FF /* Type of value */ -#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ -#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ -#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ - -/* Retry limits and lifetime flags available */ -#define IW_RETRY_ON 0x0000 /* No details... */ -#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ -#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ -#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ -#define IW_RETRY_MODIFIER 0x000F /* Modify a parameter */ -#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ -#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ -#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ - -/* Scanning request flags */ -#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ -#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ -#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ -#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ -#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ -#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ -#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ -#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ -#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ -/* Maximum size of returned data */ -#define IW_SCAN_MAX_DATA 4096 /* In bytes */ - -/* Max number of char in custom event - use multiple of them if needed */ -#define IW_CUSTOM_MAX 256 /* In bytes */ - -/****************************** TYPES ******************************/ - -/* --------------------------- SUBTYPES --------------------------- */ -/* - * Generic format for most parameters that fit in an int - */ -struct iw_param -{ - __s32 value; /* The value of the parameter itself */ - __u8 fixed; /* Hardware should not use auto select */ - __u8 disabled; /* Disable the feature */ - __u16 flags; /* Various specifc flags (if any) */ -}; - -/* - * For all data larger than 16 octets, we need to use a - * pointer to memory allocated in user space. - */ -struct iw_point -{ - caddr_t pointer; /* Pointer to the data (in user space) */ - __u16 length; /* number of fields or size in bytes */ - __u16 flags; /* Optional params */ -}; - -/* - * A frequency - * For numbers lower than 10^9, we encode the number in 'm' and - * set 'e' to 0 - * For number greater than 10^9, we divide it by the lowest power - * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... - * The power of 10 is in 'e', the result of the division is in 'm'. - */ -struct iw_freq -{ - __s32 m; /* Mantissa */ - __s16 e; /* Exponent */ - __u8 i; /* List index (when in range struct) */ - __u8 pad; /* Unused - just for alignement */ -}; - -/* - * Quality of the link - */ -struct iw_quality -{ - __u8 qual; /* link quality (%retries, SNR, - %missed beacons or better...) */ - __u8 level; /* signal level (dBm) */ - __u8 noise; /* noise level (dBm) */ - __u8 updated; /* Flags to know if updated */ -}; - -/* - * Packet discarded in the wireless adapter due to - * "wireless" specific problems... - * Note : the list of counter and statistics in net_device_stats - * is already pretty exhaustive, and you should use that first. - * This is only additional stats... - */ -struct iw_discarded -{ - __u32 nwid; /* Rx : Wrong nwid/essid */ - __u32 code; /* Rx : Unable to code/decode (WEP) */ - __u32 fragment; /* Rx : Can't perform MAC reassembly */ - __u32 retries; /* Tx : Max MAC retries num reached */ - __u32 misc; /* Others cases */ -}; - -/* - * Packet/Time period missed in the wireless adapter due to - * "wireless" specific problems... - */ -struct iw_missed -{ - __u32 beacon; /* Missed beacons/superframe */ -}; - -/* - * Quality range (for spy threshold) - */ -struct iw_thrspy -{ - struct sockaddr addr; /* Source address (hw/mac) */ - struct iw_quality qual; /* Quality of the link */ - struct iw_quality low; /* Low threshold */ - struct iw_quality high; /* High threshold */ -}; - -/* ------------------------ WIRELESS STATS ------------------------ */ -/* - * Wireless statistics (used for /proc/net/wireless) - */ -struct iw_statistics -{ - __u16 status; /* Status - * - device dependent for now */ - - struct iw_quality qual; /* Quality of the link - * (instant/mean/max) */ - struct iw_discarded discard; /* Packet discarded counts */ - struct iw_missed miss; /* Packet missed counts */ -}; - -/* ------------------------ IOCTL REQUEST ------------------------ */ -/* - * This structure defines the payload of an ioctl, and is used - * below. - * - * Note that this structure should fit on the memory footprint - * of iwreq (which is the same as ifreq), which mean a max size of - * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... - * You should check this when increasing the structures defined - * above in this file... - */ -union iwreq_data -{ - /* Config - generic */ - char name[IFNAMSIZ]; - /* Name : used to verify the presence of wireless extensions. - * Name of the protocol/provider... */ - - struct iw_point essid; /* Extended network name */ - struct iw_param nwid; /* network id (or domain - the cell) */ - struct iw_freq freq; /* frequency or channel : - * 0-1000 = channel - * > 1000 = frequency in Hz */ - - struct iw_param sens; /* signal level threshold */ - struct iw_param bitrate; /* default bit rate */ - struct iw_param txpower; /* default transmit power */ - struct iw_param rts; /* RTS threshold threshold */ - struct iw_param frag; /* Fragmentation threshold */ - __u32 mode; /* Operation mode */ - struct iw_param retry; /* Retry limits & lifetime */ - - struct iw_point encoding; /* Encoding stuff : tokens */ - struct iw_param power; /* PM duration/timeout */ - struct iw_quality qual; /* Quality part of statistics */ - - struct sockaddr ap_addr; /* Access point address */ - struct sockaddr addr; /* Destination address (hw/mac) */ - - struct iw_param param; /* Other small parameters */ - struct iw_point data; /* Other large parameters */ -}; - -/* - * The structure to exchange data for ioctl. - * This structure is the same as 'struct ifreq', but (re)defined for - * convenience... - * Do I need to remind you about structure size (32 octets) ? - */ -struct iwreq -{ - union - { - char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ - } ifr_ifrn; - - /* Data part (defined just above) */ - union iwreq_data u; -}; - -/* -------------------------- IOCTL DATA -------------------------- */ -/* - * For those ioctl which want to exchange mode data that what could - * fit in the above structure... - */ - -/* - * Range of parameters - */ - -struct iw_range -{ - /* Informative stuff (to choose between different interface) */ - __u32 throughput; /* To give an idea... */ - /* In theory this value should be the maximum benchmarked - * TCP/IP throughput, because with most of these devices the - * bit rate is meaningless (overhead an co) to estimate how - * fast the connection will go and pick the fastest one. - * I suggest people to play with Netperf or any benchmark... - */ - - /* NWID (or domain id) */ - __u32 min_nwid; /* Minimal NWID we are able to set */ - __u32 max_nwid; /* Maximal NWID we are able to set */ - - /* Old Frequency (backward compat - moved lower ) */ - __u16 old_num_channels; - __u8 old_num_frequency; - /* Filler to keep "version" at the same offset */ - __s32 old_freq[6]; - - /* signal level threshold range */ - __s32 sensitivity; - - /* Quality of link & SNR stuff */ - /* Quality range (link, level, noise) - * If the quality is absolute, it will be in the range [0 ; max_qual], - * if the quality is dBm, it will be in the range [max_qual ; 0]. - * Don't forget that we use 8 bit arithmetics... */ - struct iw_quality max_qual; /* Quality of the link */ - /* This should contain the average/typical values of the quality - * indicator. This should be the threshold between a "good" and - * a "bad" link (example : monitor going from green to orange). - * Currently, user space apps like quality monitors don't have any - * way to calibrate the measurement. With this, they can split - * the range between 0 and max_qual in different quality level - * (using a geometric subdivision centered on the average). - * I expect that people doing the user space apps will feedback - * us on which value we need to put in each driver... */ - struct iw_quality avg_qual; /* Quality of the link */ - - /* Rates */ - __u8 num_bitrates; /* Number of entries in the list */ - __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ - - /* RTS threshold */ - __s32 min_rts; /* Minimal RTS threshold */ - __s32 max_rts; /* Maximal RTS threshold */ - - /* Frag threshold */ - __s32 min_frag; /* Minimal frag threshold */ - __s32 max_frag; /* Maximal frag threshold */ - - /* Power Management duration & timeout */ - __s32 min_pmp; /* Minimal PM period */ - __s32 max_pmp; /* Maximal PM period */ - __s32 min_pmt; /* Minimal PM timeout */ - __s32 max_pmt; /* Maximal PM timeout */ - __u16 pmp_flags; /* How to decode max/min PM period */ - __u16 pmt_flags; /* How to decode max/min PM timeout */ - __u16 pm_capa; /* What PM options are supported */ - - /* Encoder stuff */ - __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ - __u8 num_encoding_sizes; /* Number of entry in the list */ - __u8 max_encoding_tokens; /* Max number of tokens */ - /* For drivers that need a "login/passwd" form */ - __u8 encoding_login_index; /* token index for login token */ - - /* Transmit power */ - __u16 txpower_capa; /* What options are supported */ - __u8 num_txpower; /* Number of entries in the list */ - __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ - - /* Wireless Extension version info */ - __u8 we_version_compiled; /* Must be WIRELESS_EXT */ - __u8 we_version_source; /* Last update of source */ - - /* Retry limits and lifetime */ - __u16 retry_capa; /* What retry options are supported */ - __u16 retry_flags; /* How to decode max/min retry limit */ - __u16 r_time_flags; /* How to decode max/min retry life */ - __s32 min_retry; /* Minimal number of retries */ - __s32 max_retry; /* Maximal number of retries */ - __s32 min_r_time; /* Minimal retry lifetime */ - __s32 max_r_time; /* Maximal retry lifetime */ - - /* Frequency */ - __u16 num_channels; /* Number of channels [0; num - 1] */ - __u8 num_frequency; /* Number of entry in the list */ - struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ - /* Note : this frequency list doesn't need to fit channel numbers, - * because each entry contain its channel index */ -}; - -/* - * Private ioctl interface information - */ - -struct iw_priv_args -{ - __u32 cmd; /* Number of the ioctl to issue */ - __u16 set_args; /* Type and number of args */ - __u16 get_args; /* Type and number of args */ - char name[IFNAMSIZ]; /* Name of the extension */ -}; - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* - * Wireless events are carried through the rtnetlink socket to user - * space. They are encapsulated in the IFLA_WIRELESS field of - * a RTM_NEWLINK message. - */ - -/* - * A Wireless Event. Contains basically the same data as the ioctl... - */ -struct iw_event -{ - __u16 len; /* Real lenght of this stuff */ - __u16 cmd; /* Wireless IOCTL */ - union iwreq_data u; /* IOCTL fixed payload */ -}; - -/* Size of the Event prefix (including padding and alignement junk) */ -#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) -/* Size of the various events */ -#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) -#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) -#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) -#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point)) -#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) -#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) -#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) - -/* Note : in the case of iw_point, the extra data will come at the - * end of the event */ - -#endif /* _LINUX_WIRELESS_H */ |