| -rw-r--r-- | libopie2/opiecore/device/odevice_ipaq.cpp | 2 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_ramses.cpp | 2 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_simpad.cpp | 2 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.cpp | 4 |
4 files changed, 8 insertions, 2 deletions
diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp index 7f5aa7b..6193ddc 100644 --- a/libopie2/opiecore/device/odevice_ipaq.cpp +++ b/libopie2/opiecore/device/odevice_ipaq.cpp @@ -286,96 +286,98 @@ bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, b // keycode - Key_Left = position of the button starting from left clockwise // add the rotation to it and modolo. No we've the original offset // add the offset to the Key_Left key if ( d-> m_model == Model_iPAQ_H5xxx ) newkeycode = Key_Left + ( keycode - Key_Left + 3 ) % 4; break; } // map Power Button short/long press to F34/F35 case Key_SysReq: { if ( isPress ) { if ( m_power_timer ) killTimer ( m_power_timer ); m_power_timer = startTimer ( 500 ); } else if ( m_power_timer ) { killTimer ( m_power_timer ); m_power_timer = 0; QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, true, false ); QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, false, false ); } newkeycode = Key_unknown; break; } } if ( newkeycode != keycode ) { if ( newkeycode != Key_unknown ) QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat ); return true; } else return false; } void iPAQ::timerEvent ( QTimerEvent * ) { killTimer ( m_power_timer ); m_power_timer = 0; QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false ); QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false ); } void iPAQ::playAlarmSound() { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); + if(!snd.isFinished()) + return; changeMixerForAlarm(0, "/dev/sound/mixer", &snd ); snd. play(); #endif } bool iPAQ::setSoftSuspend ( bool soft ) { bool res = false; int fd; if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) { if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 ) res = true; else ::perror ( "write to /proc/sys/ts/suspend_button_mode" ); ::close ( fd ); } else ::perror ( "/proc/sys/ts/suspend_button_mode" ); return res; } bool iPAQ::setDisplayBrightness ( int bright ) { bool res = false; int fd; if ( bright > 255 ) bright = 255; if ( bright < 0 ) bright = 0; if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) { FLITE_IN bl; bl. mode = 1; bl. pwr = bright ? 1 : 0; bl. brightness = ( bright * ( displayBrightnessResolution() - 1 ) + 127 ) / 255; res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 ); ::close ( fd ); } return res; } diff --git a/libopie2/opiecore/device/odevice_ramses.cpp b/libopie2/opiecore/device/odevice_ramses.cpp index 0cddf85..c75ea3a 100644 --- a/libopie2/opiecore/device/odevice_ramses.cpp +++ b/libopie2/opiecore/device/odevice_ramses.cpp @@ -54,96 +54,98 @@ #endif using namespace Opie::Core; using namespace Opie::Core::Internal; void Ramses::init(const QString&) { d->m_vendorstr = "M und N"; d->m_vendor = Vendor_MundN; // with old Prototype-LCD, /proc/sys/board/lcd_type = 1 //d->m_modelstr = "Ramses"; //d->m_model = Model_Ramses_MNCI; //d->m_rotation = Rot0; // all current Hardware, with /proc/sys/board/lcd_type = 2 d->m_modelstr = "MNCIRX"; d->m_model = Model_Ramses_MNCIRX; d->m_rotation = Rot90; d->m_holdtime = 500; // This table is true for a Intel XScale PXA 255 #ifdef QT_QWS_ALLOW_OVERCLOCK #define OC(x...) x #else #define OC(x...) #endif d->m_cpu_frequencies->append("99000"); // mem= 99, run= 99, turbo= 99, PXbus= 50 OC(d->m_cpu_frequencies->append("118000"); ) // mem=118, run=118, turbo=118, PXbus= 59 OC'd mem d->m_cpu_frequencies->append("199100"); // mem= 99, run=199, turbo=199, PXbus= 99 OC(d->m_cpu_frequencies->append("236000"); ) // mem=118, run=236, turbo=236, PXbus=118 OC'd mem d->m_cpu_frequencies->append("298600"); // mem= 99, run=199, turbo=298, PXbus= 99 OC(d->m_cpu_frequencies->append("354000"); ) // mem=118, run=236, turbo=354, PXbus=118 OC'd mem d->m_cpu_frequencies->append("398099"); // mem= 99, run=199, turbo=398, PXbus= 99 d->m_cpu_frequencies->append("398100"); // mem= 99, run=398, turbo=398, PXbus=196 OC(d->m_cpu_frequencies->append("471000"); ) // mem=118, run=471, turbo=471, PXbus=236 OC'd mem/core/bus } void Ramses::playAlarmSound() { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); + if(!snd.isFinished()) + return; changeMixerForAlarm( 0, "/dev/sound/mixer" , &snd); snd.play(); #else #error QT_NO_SOUND defined #endif } bool Ramses::suspend() { if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; sendSuspendmsg(); ::sync(); int fd; if ((fd = ::open("/proc/sys/pm/suspend", O_WRONLY)) >= 0) { char writeCommand[] = "1\n"; ::write(fd, writeCommand, sizeof(writeCommand) ); ::close(fd); } ::usleep ( 200 * 1000 ); return true; } bool Ramses::setDisplayBrightness(int bright) { //qDebug("Ramses::setDisplayBrightness(%d)", bright); bool res = false; int fd; // pwm1 brighness: 20 steps 500..0 (dunkel->hell) if (bright > 255 ) bright = 255; if (bright < 0) bright = 0; // Turn backlight completely off if brightness=0 if ((fd = ::open("/proc/sys/board/lcd_backlight", O_WRONLY)) >= 0) { char writeCommand[10]; const int count = sprintf(writeCommand, "%d\n", bright ? 1 : 0); res = (::write(fd, writeCommand, count) != -1); ::close(fd); diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp index fd46b95..34876da 100644 --- a/libopie2/opiecore/device/odevice_simpad.cpp +++ b/libopie2/opiecore/device/odevice_simpad.cpp @@ -274,96 +274,98 @@ QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway //vl << Led_Off; return vl; } OLedState SIMpad::ledState ( OLed l ) const { switch ( l ) { case Led_Power: return m_leds [0]; //case Led_Mail: // return m_leds [1]; default: return Led_Off; } } bool SIMpad::setLedState ( OLed l, OLedState st ) { if ( l == Led_Power ) { m_leds [0] = st; setCS3Bit(st == Led_On, SIMPAD_LED2_ON); return true; } return false; } bool SIMpad::filter ( int /*unicode*/, int /*keycode*/, int /*modifiers*/, bool /*isPress*/, bool /*autoRepeat*/ ) { //TODO return false; } void SIMpad::timerEvent ( QTimerEvent * ) { killTimer ( m_power_timer ); m_power_timer = 0; QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false ); QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false ); } void SIMpad::playAlarmSound() { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); + if(!snd.isFinished()) + return; /* save as the Sound is static! */ changeMixerForAlarm( 0, "/dev/sound/mixer" , &snd); snd. play(); #endif } bool SIMpad::suspend() // Must override because SIMpad does NOT have apm { qDebug( "ODevice for SIMpad: suspend()" ); if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; /* * we need to save the screen content * then go to suspend using ODevice::suspend * and finally restore the screen content */ (void)::system( "cat /dev/fb/0 > /tmp/.buffer" ); bool res = ODevice::suspend(); /* * restore */ if ( res ) ::system( "cat /tmp/.buffer > /dev/fb/0" ); return res; } bool SIMpad::setSoftSuspend ( bool soft ) { qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" ); return false; } bool SIMpad::setDisplayStatus ( bool on ) { qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" ); return setCS3Bit(on, SIMPAD_DISPLAY_ON); } bool SIMpad::setDisplayBrightness ( int bright ) diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp index 64fa199..733479e 100644 --- a/libopie2/opiecore/device/odevice_zaurus.cpp +++ b/libopie2/opiecore/device/odevice_zaurus.cpp @@ -300,100 +300,100 @@ int status; /* set new led status if you call SHARP_LED_SETSTATUS */ #define SHARP_LED_MAIL_EXISTS 9 /* mail status (exists or not) */ #define LED_MAIL_NO_UNREAD_MAIL 0 /* for SHARP_LED_MAIL_EXISTS */ #define LED_MAIL_NEWMAIL_EXISTS 1 /* for SHARP_LED_MAIL_EXISTS */ #define LED_MAIL_UNREAD_MAIL_EX 2 /* for SHARP_LED_MAIL_EXISTS */ // #include <asm/sharp_apm.h> // including kernel headers is evil ... #define APM_IOCGEVTSRC OD_IOR( 'A', 203, int ) #define APM_IOCSEVTSRC OD_IORW( 'A', 204, int ) #define APM_EVT_POWER_BUTTON (1 << 0) #define FL_IOCTL_STEP_CONTRAST 100 void Zaurus::buzzer ( int sound ) { #ifndef QT_NO_SOUND Sound *snd = 0; // Not all devices have real sound if ( d->m_model == Model_Zaurus_SLC7x0 || d->m_model == Model_Zaurus_SLB600 ){ switch ( sound ){ case SHARP_BUZ_TOUCHSOUND: { static Sound touch_sound("touchsound"); snd = &touch_sound; } break; case SHARP_BUZ_KEYSOUND: { static Sound key_sound( "keysound" ); snd = &key_sound; } break; case SHARP_BUZ_SCHEDULE_ALARM: default: { static Sound alarm_sound("alarm"); snd = &alarm_sound; } break; } } // If a soundname is defined, we expect that this device has // sound capabilities.. Otherwise we expect to have the buzzer // device.. - if ( snd ){ + if ( snd && snd->isFinished() ){ changeMixerForAlarm( 0, "/dev/sound/mixer", snd ); snd-> play(); - } else { + } else if( !snd ) { int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK ); if ( fd >= 0 ) { ::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound ); ::close ( fd ); } } #endif } void Zaurus::playAlarmSound() { buzzer ( SHARP_BUZ_SCHEDULE_ALARM ); } void Zaurus::playTouchSound() { buzzer ( SHARP_BUZ_TOUCHSOUND ); } void Zaurus::playKeySound() { buzzer ( SHARP_BUZ_KEYSOUND ); } QValueList <OLed> Zaurus::ledList() const { QValueList <OLed> vl; vl << Led_Mail; return vl; } QValueList <OLedState> Zaurus::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Mail ) vl << Led_Off << Led_On << Led_BlinkSlow; return vl; } OLedState Zaurus::ledState ( OLed which ) const { if ( which == Led_Mail ) return m_leds [0]; |