| -rw-r--r-- | libopie/odevice.cpp | 320 | ||||
| -rw-r--r-- | libopie/odevice.h | 11 |
2 files changed, 330 insertions, 1 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp index 7d862cd..921a94e 100644 --- a/libopie/odevice.cpp +++ b/libopie/odevice.cpp @@ -133,4 +133,30 @@ protected: }; +class SIMpad : public ODevice, public QWSServer::KeyboardFilter { +protected: + virtual void init ( ); + virtual void initButtons ( ); + +public: + virtual bool setSoftSuspend ( bool soft ); + + virtual bool setDisplayBrightness ( int b ); + virtual int displayBrightnessResolution ( ) const; + + virtual void alarmSound ( ); + + virtual QValueList <OLed> ledList ( ) const; + virtual QValueList <OLedState> ledStateList ( OLed led ) const; + virtual OLedState ledState ( OLed led ) const; + virtual bool setLedState ( OLed led, OLedState st ); + +protected: + virtual bool filter ( int unicode, int keycode, int modifiers, bool isPress, bool autoRepeat ); + virtual void timerEvent ( QTimerEvent *te ); + + int m_power_timer; + + OLedState m_leds [1]; //FIXME check if really only one +}; struct i_button { @@ -230,4 +256,26 @@ struct z_button z_buttons_c700 [] = { }; +struct s_button { + uint model; + Qt::Key code; + char *utext; + char *pix; + char *fpressedservice; + char *fpressedaction; + char *fheldservice; + char *fheldaction; +} simpad_buttons [] = { + { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, + Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"), + "devicebuttons/simpad_menu", + "QPE/TaskBar", "toggleMenu()", + "QPE/TaskBar", "toggleStartMenu()" }, + { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus, + Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"), + "devicebuttons/ipaq_home", + "QPE/Launcher", "home()", + "buttonsettings", "raise()" }, +}; + static QCString makeChannel ( const char *str ) { @@ -252,4 +300,6 @@ ODevice *ODevice::inst ( ) else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" )) dev = new Zaurus ( ); + else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/CS3" )) + dev = new SIMpad ( ); else dev = new ODevice ( ); @@ -1441,2 +1491,272 @@ int Zaurus::displayBrightnessResolution ( ) const +/************************************************** + * + * SIMpad + * + **************************************************/ + +void SIMpad::init ( ) +{ + d-> m_vendorstr = "SIEMENS"; + d-> m_vendor = Vendor_SIEMENS; + + QFile f ( "/proc/hal/model" ); + + //TODO Implement model checking + //FIXME For now we assume an SL4 + + d-> m_modelstr = "SL4"; + d-> m_model = Model_SIMpad_SL4; + + switch ( d-> m_model ) { + default: + d-> m_rotation = Rot270; + break; + } + + f. setName ( "/etc/familiar-version" ); + if ( f. open ( IO_ReadOnly )) { + d-> m_systemstr = "Familiar"; + d-> m_system = System_Familiar; + + QTextStream ts ( &f ); + d-> m_sysverstr = ts. readLine ( ). mid ( 10 ); + + f. close ( ); + } else { + f. setName ( "/etc/oz_version" ); + + if ( f. open ( IO_ReadOnly )) { + d-> m_systemstr = "OpenEmbedded/SIMpad"; + d-> m_system = System_OpenZaurus; + + QTextStream ts ( &f ); + ts.setDevice ( &f ); + d-> m_sysverstr = ts. readLine ( ); + f. close ( ); + } + } + + m_leds [0] = m_leds [1] = Led_Off; + + m_power_timer = 0; + +} + +void SIMpad::initButtons ( ) +{ + if ( d-> m_buttons ) + return; + + if ( isQWS( ) ) + QWSServer::setKeyboardFilter ( this ); + + d-> m_buttons = new QValueList <ODeviceButton>; + + for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) { + s_button *sb = simpad_buttons + i; + ODeviceButton b; + + if (( sb-> model & d-> m_model ) == d-> m_model ) { + b. setKeycode ( sb-> code ); + b. setUserText ( QObject::tr ( "Button", sb-> utext )); + b. setPixmap ( Resource::loadPixmap ( sb-> pix )); + b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction )); + b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction )); + + d-> m_buttons-> append ( b ); + } + } + reloadButtonMapping ( ); + + QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); + connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); +} + +// SIMpad boardcontrol register CS3 +#define SIMPAD_BOARDCONTROL "/proc/CS3" +#define SIMPAD_VCC_5V_EN 0x0001 // For 5V PCMCIA +#define SIMPAD_VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA +#define SIMPAD_EN1 0x0004 // This is only for EPROM's +#define SIMPAD_EN0 0x0008 // Both should be enable for 3.3V or 5V +#define SIMPAD_DISPLAY_ON 0x0010 +#define SIMPAD_PCMCIA_BUFF_DIS 0x0020 +#define SIMPAD_MQ_RESET 0x0040 +#define SIMPAD_PCMCIA_RESET 0x0080 +#define SIMPAD_DECT_POWER_ON 0x0100 +#define SIMPAD_IRDA_SD 0x0200 // Shutdown for powersave +#define SIMPAD_RS232_ON 0x0400 +#define SIMPAD_SD_MEDIAQ 0x0800 // Shutdown for powersave +#define SIMPAD_LED2_ON 0x1000 +#define SIMPAD_IRDA_MODE 0x2000 // Fast/Slow IrDA mode +#define SIMPAD_ENABLE_5V 0x4000 // Enable 5V circuit +#define SIMPAD_RESET_SIMCARD 0x8000 + +//SIMpad touchscreen backlight strength control +#define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL" +#define SIMPAD_BACKLIGHT_MASK 0x00a10044 + +QValueList <OLed> SIMpad::ledList ( ) const +{ + QValueList <OLed> vl; + vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one? + //vl << Led_Mail; //TODO find out if LED1 is accessible anyway + return vl; +} + +QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const +{ + QValueList <OLedState> vl; + + if ( l == Led_Power ) //FIXME which LED is LED2 ? The green one or the amber one? + vl << Led_Off << Led_On; + //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway + //vl << Led_Off; + return vl; +} + +OLedState SIMpad::ledState ( OLed l ) const +{ + switch ( l ) { + case Led_Power: + return m_leds [0]; + //case Led_Mail: + // return m_leds [1]; + default: + return Led_Off; + } +} + +bool SIMpad::setLedState ( OLed l, OLedState st ) +{ + static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK ); + + if ( l == Led_Power ) { + if ( fd >= 0 ) { + LED_IN leds; + ::memset ( &leds, 0, sizeof( leds )); + leds. TotalTime = 0; + leds. OnTime = 0; + leds. OffTime = 1; + leds. OffOnBlink = 2; + + switch ( st ) { + case Led_Off : leds. OffOnBlink = 0; break; + case Led_On : leds. OffOnBlink = 1; break; + case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break; + case Led_BlinkFast: leds. OnTime = 5; leds. OffTime = 5; break; + } + + { + /*TODO Implement this like that: + read from CS3 + && with SIMPAD_LED2_ON + write to CS3 */ + m_leds [0] = st; + return true; + } + } + } + return false; +} + + +bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat ) +{ + //TODO + return false; +} + +void SIMpad::timerEvent ( QTimerEvent * ) +{ + killTimer ( m_power_timer ); + m_power_timer = 0; + QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false ); + QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false ); +} + + +void SIMpad::alarmSound ( ) +{ +#ifndef QT_NO_SOUND + static Sound snd ( "alarm" ); + int fd; + int vol; + bool vol_reset = false; + + if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) { + if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) { + Config cfg ( "qpe" ); + cfg. setGroup ( "Volume" ); + + int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 ); + if ( volalarm < 0 ) + volalarm = 0; + else if ( volalarm > 100 ) + volalarm = 100; + volalarm |= ( volalarm << 8 ); + + if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 ) + vol_reset = true; + } + } + + snd. play ( ); + while ( !snd. isFinished ( )) + qApp-> processEvents ( ); + + if ( fd >= 0 ) { + if ( vol_reset ) + ::ioctl ( fd, MIXER_WRITE( 0 ), &vol ); + ::close ( fd ); + } +#endif +} + + +bool SIMpad::setSoftSuspend ( bool soft ) +{ + //TODO + return false; +} + + +bool SIMpad::setDisplayBrightness ( int bright ) +{ + bool res = false; + int fd; + + if ( bright > 255 ) + bright = 255; + if ( bright < 0 ) + bright = 0; + + if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) { + int value = 255 - bright; + const int mask = SIMPAD_BACKLIGHT_MASK; + value = value << 8; + value += mask; + char writeCommand[100]; + const int count = sprintf( writeCommand, "0x%x\n", value ); + res = ( ::write ( fd, writeCommand, count ) != -1 ); + ::close ( fd ); + } + return res; +} + + +int SIMpad::displayBrightnessResolution ( ) const +{ + switch ( model ( )) { + case Model_SIMpad_CL4: + case Model_SIMpad_SL4: + case Model_SIMpad_SLC: + case Model_SIMpad_TSinus: + return 255; //TODO find out if this is save + + default: + return 2; + } +} + diff --git a/libopie/odevice.h b/libopie/odevice.h index 0c55ea0..dcdd4a8 100644 --- a/libopie/odevice.h +++ b/libopie/odevice.h @@ -57,4 +57,12 @@ enum OModel { Model_Zaurus_SLB600 = ( Model_Zaurus | 0x000004 ), Model_Zaurus_SLC700 = ( Model_Zaurus | 0x000005 ), + + Model_SIMpad = ( 3 << 24 ), + + Model_SIMpad_All = ( Model_SIMpad | 0xffffff ), + Model_SIMpad_CL4 = ( Model_SIMpad | 0x000001 ), + Model_SIMpad_SL4 = ( Model_SIMpad | 0x000002 ), + Model_SIMpad_SLC = ( Model_SIMpad | 0x000004 ), + Model_SIMpad_TSinus = ( Model_SIMpad | 0x000008 ), }; @@ -66,5 +74,6 @@ enum OVendor { Vendor_HP, - Vendor_Sharp + Vendor_Sharp, + Vendor_SIEMENS, }; |