1 files changed, 0 insertions, 8 deletions

diff --git a/noncore/apps/opie-console/io_serial.cpp b/noncore/apps/opie-console/io_serial.cpp
index 03f1b1a..a4a6f0b 100644
--- a/noncore/apps/opie-console/io_serial.cpp
+++ b/noncore/apps/opie-console/io_serial.cpp
@@ -6,76 +6,71 @@
 
 IOSerial::IOSerial(const Profile &config) : IOLayer(config) {
     m_read = 0l;
     m_error = 0l;
     m_fd = 0;
     reload(config);
 }
 
 
 IOSerial::~IOSerial() {
     if (m_fd) {
         close();
     }
 }
 
 void IOSerial::send(const QByteArray &data) {
     if (m_fd) {
         write(m_fd, data.data(), data.size());
     } else {
         emit error(Refuse, tr("Not connected"));
     }
 }
 
 void IOSerial::close() {
-    qWarning("closing!");
     if (m_fd) {
         delete m_read;
         delete m_error;
         ::close(m_fd);
         m_fd = 0;
     } else {
         emit error(Refuse, tr("Not connected"));
     }
 }
 
 bool IOSerial::open() {
-    qWarning("open");
     if (!m_fd) {
-        qWarning("going to open %s",  m_device.latin1());
         struct termios tty;
         m_fd = ::open(m_device, O_RDWR | O_NOCTTY | O_NONBLOCK);
         if (m_fd < 0) {
-            qWarning(" fd < 0 ");
             emit error(CouldNotOpen, strerror(errno));
             return FALSE;
         }
         tcgetattr(m_fd, &tty);
 
         /* Baud rate */
         int speed = baud(m_baud);
         if (speed == -1) {
-            qWarning("speed -1");
             emit error(Refuse, tr("Invalid baud rate"));
         }
         cfsetospeed(&tty, speed);
         cfsetispeed(&tty, speed);
 
         /* Take care of Space / Mark parity */
         if (m_dbits == 7 && (m_parity == ParitySpace || m_parity == ParityMark)) {
             m_dbits = 8;
         }
 
         /* Data bits */
         switch (m_dbits) {
             case 5: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS5; break;
             case 6: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS6; break;
             case 7: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS7; break;
             case 8: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8; break;
 	    default: break;
         }
 
         /* Raw, no echo mode */
         tty.c_iflag =  IGNBRK;
         tty.c_lflag = 0;
         tty.c_oflag = 0;
         tty.c_cflag |= CLOCAL | CREAD;
@@ -97,59 +92,56 @@ bool IOSerial::open() {
             tty.c_iflag &= ~(IXON|IXOFF|IXANY);
 
         if (m_flow & FlowHW)
             tty.c_cflag |= CRTSCTS;
         else
             tty.c_cflag &= ~CRTSCTS;
 
         /* Parity */
         tty.c_cflag &= ~(PARENB | PARODD);
         if (m_parity & ParityEven)
             tty.c_cflag |= PARENB;
         else if (m_parity & ParityOdd)
             tty.c_cflag |= (PARENB | PARODD);
 
         /* Set the changes */
         tcsetattr(m_fd, TCSANOW, &tty);
 
         /* Notifications on read & errors */
         m_read = new QSocketNotifier(m_fd, QSocketNotifier::Read, this);
         m_error = new QSocketNotifier(m_fd, QSocketNotifier::Exception, this);
         connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
         connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
         return TRUE;
     } else {
-        qWarning(" already opened");
         emit error(Refuse, tr("Device is already connected"));
         m_fd = 0;
         return FALSE;
     }
 }
 
 void IOSerial::reload(const Profile &config) {
     m_device = config.readEntry("Device", SERIAL_DEFAULT_DEVICE);
-    qWarning( "Dev" +m_device );
-    qWarning( "Conf:" +config.readEntry("Device") );
     m_baud = config.readNumEntry("Speed", SERIAL_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", SERIAL_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", SERIAL_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", SERIAL_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", SERIAL_DEFAULT_FLOW);
 
 }
 
 int IOSerial::baud(int baud) const {
     switch (baud) {
         case 300:    return B300;    break;
         case 600:    return B600;    break;
         case 1200:   return B1200;   break;
         case 2400:   return B2400;   break;
         case 4800:   return B4800;   break;
         case 9600:   return B9600;   break;
         case 19200:  return B19200;  break;
         case 38400:  return B38400;  break;
         case 57600:  return B57600;  break;
         case 115200: return B115200; break;
     }
     return -1;
 }