10 files changed, 289 insertions, 118 deletions

diff --git a/noncore/net/opietooth/applet/bluezapplet.cpp b/noncore/net/opietooth/applet/bluezapplet.cpp
index 90b0c6d..6351d4e 100644
--- a/noncore/net/opietooth/applet/bluezapplet.cpp
+++ b/noncore/net/opietooth/applet/bluezapplet.cpp
@@ -107,48 +107,52 @@ namespace OpieTooth {
                 odebug << "btDevice isLoaded" << oendl;
                 return true;
             } else {
                 odebug << "btDevice is NOT loaded" << oendl;
                 return false;
             }
         } else {
             odebug << "btDevice is ZERO" << oendl;
             return false;
         }
     }
 
-    int BluezApplet::setBluezStatus(int c) {
+    int BluezApplet::setBluezStatus(int c, bool sync) {
 
         if ( c == 1 ) {
             switch ( ODevice::inst()->model() ) {
             case Model_iPAQ_H39xx:
                 btDevice = new Device( "/dev/tts/1", "bcsp", "921600" );
                 break;
 
             case Model_iPAQ_H5xxx:
                 btDevice = new Device( "/dev/tts/1", "any", "921600" );
                 break;
 
 #ifndef OPIE120
             case Model_MyPal_716:
                 btDevice = new Device( "/dev/ttyS1", "bcsp", "921600" );
                 break;
 #endif
 
             default:
                 btDevice = new Device( "/dev/ttySB0", "bcsp", "230400" );
                 break;
             }
-            QCopEnvelope e("QPE/System", "execute(QString)");
-            e << QString("/etc/init.d/bluetooth start");
+            if (sync) {
+                ::system("/etc/init.d/bluetooth start >/dev/null 2>/dev/null");
+            } else {
+                QCopEnvelope e("QPE/System", "execute(QString)");
+                e << QString("/etc/init.d/bluetooth start");
+            }
         } else {
             ::system("/etc/init.d/bluetooth stop >/dev/null 2>/dev/null");
             if ( btManager ) {
                 delete btManager;
                 btManager = 0;
             }
             if ( btDevice ) {
                 delete btDevice;
                 btDevice = 0;
             }
        }
         return 0;
@@ -160,25 +164,25 @@ namespace OpieTooth {
 
     int BluezApplet::setBluezDiscoveryStatus(int d) {
       return bluezDiscoveryActive = d;
     }
 
     // FIXME mbhaynie
     // receiver for QCopChannel("QPE/Bluetooth") messages.
     void BluezApplet::slotMessage( const QCString& str, const QByteArray& )
     {
         if ( str == "enableBluetooth()") {
             m_wasOn = checkBluezStatus();
             if (!m_wasOn) {
-                setBluezStatus(1);
+                setBluezStatus(1, true);
                 sleep(2);
             }
         }
         else if ( str == "disableBluetooth()") {
             /*
              * We can down BT only if it was started by qcop. We don't want 
              * to down BT started from menu an break our networking connection
              */
             if (checkBluezStatus() && !m_wasOn)
                 setBluezStatus(0);
             doListDevice = false;
         }
diff --git a/noncore/net/opietooth/applet/bluezapplet.h b/noncore/net/opietooth/applet/bluezapplet.h
index 90bee3b..1937934 100644
--- a/noncore/net/opietooth/applet/bluezapplet.h
+++ b/noncore/net/opietooth/applet/bluezapplet.h
@@ -46,25 +46,25 @@ namespace OpieTooth {
         static int position();
     protected:
         void timerEvent(QTimerEvent *te );
 
 public slots:
         void fillList( const QString& device, RemoteDevice::ValueList list );
 
     private:
         void mousePressEvent( QMouseEvent * );
         void paintEvent( QPaintEvent* );
         void launchManager();
         bool checkBluezStatus();
-        int setBluezStatus(int);
+        int setBluezStatus(int, bool sync = false);
         int checkBluezDiscoveryStatus();
         int setBluezDiscoveryStatus(int);
 
     private:
         Device* btDevice;
         Manager *btManager;
         QPixmap bluezOnPixmap;
         QPixmap bluezOffPixmap;
         QPixmap bluezDiscoveryOnPixmap;
         bool bluezactive;
         bool bluezDiscoveryActive;
         bool doListDevice; //If I have to list devices after bringing BT up?
diff --git a/noncore/net/opietooth/lib/device.cc b/noncore/net/opietooth/lib/device.cc
index 40acbd2..2f04d46 100644
--- a/noncore/net/opietooth/lib/device.cc
+++ b/noncore/net/opietooth/lib/device.cc
@@ -7,51 +7,49 @@
 #include <opie2/odevice.h>
 
 using namespace Opie::Core;
 
 /* STD */
 #include <signal.h>
 
 
 using namespace OpieTooth;
 
 using Opie::Core::OProcess;
 namespace {
-    int parsePid( const QCString& par )
-    {
-        int id=0;
-        QString string( par );
-        QStringList list =  QStringList::split( '\n', string );
+  int parsePid( const QCString& par )
+  {
+    int id = 0;
+    QString string( par );
+    QStringList list =  QStringList::split( '\n', string );
 
-        for( QStringList::Iterator it = list.begin(); it != list.end(); ++it )
-        {
-            owarn << "parsePID: " << (*it).latin1() << oendl;
+    for( QStringList::Iterator it = list.begin(); it != list.end(); ++it ) {
+      owarn << "parsePID: " << (*it).latin1() << oendl;
 
-            // FIXME mbhaynie:  Surely there is a better way to skip
-            // verbosity (E.g. the TI device configuration
-            // script). Apparently the PID is always on a line by 
-            // itself, or is at least the first word of a line.  Does
-            // QString have somethine like startsWithRegex("[0-9]+")?
-            if( (*it).startsWith("#") ) continue;
-            if( (*it).startsWith("TI") ) continue;
-            if( (*it).startsWith("Loading") ) continue;
-            if( (*it).startsWith("BTS") ) continue;
-            if( !(*it).startsWith("CSR") )
-            {
-                id = (*it).toInt();
-                break;
-            }
-        }
-        return id;
+      // FIXME mbhaynie:  Surely there is a better way to skip
+      // verbosity (E.g. the TI device configuration
+      // script). Apparently the PID is always on a line by 
+      // itself, or is at least the first word of a line.  Does
+      // QString have somethine like startsWithRegex("[0-9]+")?
+      if( (*it).startsWith("#") ) continue;
+      if( (*it).startsWith("TI") ) continue;
+      if( (*it).startsWith("Loading") ) continue;
+      if( (*it).startsWith("BTS") ) continue;
+      if( !(*it).startsWith("CSR") ) {
+        id = (*it).toInt();
+        break;
+      }
     }
+    return id;
+  }
 }
 
 Device::Device(const QString &device, const QString &mode, const QString &speed )
   : QObject(0, "device") {
 
   owarn << "OpieTooth::Device create" << oendl;
   m_hci = 0;
   m_process = 0;
   m_attached = false;
   m_device = device;
   m_mode = mode;
   m_speed = speed;
@@ -66,109 +64,107 @@ Device::~Device(){
 // sure why. 
 void Device::attach(){
   owarn << "attaching " << m_device.latin1() << " " << m_mode.latin1() << " " << m_speed.latin1() << oendl;
   if(m_process == 0 ){
     m_output.resize(0);
     owarn << "new process to create" << oendl;
     m_process = new OProcess();
     *m_process << "hciattach";
     *m_process << "-p";
 
     // FIXME -- this is a hack for an odd hciattach interface.
     if ( ODevice::inst()->modelString() == "HX4700" )
-    {
-        *m_process << "-S" << "/etc/bluetooth/TIInit_3.2.26.bts" << "/dev/ttyS1" << "texas";
-    }
+      *m_process << "-S" << "/etc/bluetooth/TIInit_3.2.26.bts" << "/dev/ttyS1" << "texas";
     else
-    {
-        *m_process << m_device << m_mode << m_speed;
-    }
+      *m_process << m_device << m_mode << m_speed;
     connect(m_process, SIGNAL( processExited(Opie::Core::OProcess*) ),
             this, SLOT( slotExited(Opie::Core::OProcess* ) ) );
     connect(m_process, SIGNAL( receivedStdout(Opie::Core::OProcess*, char*, int) ),
             this, SLOT(slotStdOut(Opie::Core::OProcess*,char*,int ) ) );
     connect(m_process, SIGNAL(receivedStderr(Opie::Core::OProcess*, char*, int ) ),
             this, SLOT(slotStdErr(Opie::Core::OProcess*,char*,int) ) );
     if(!m_process->start(OProcess::NotifyOnExit, OProcess::AllOutput ) ){
       owarn << "Could not start" << oendl;
       delete m_process;
       m_process = 0;
     }
-  };
+  }
 }
 void Device::detach(){
   delete m_hci;
+  m_hci = 0;
   delete m_process;
+  m_process = 0;
   // kill the pid we got
   if(m_attached ){
     //kill the pid
     owarn << "killing" << oendl;
-    kill(pid, 9);
+    ::kill(pid, 9);
   }
   owarn << "detached" << oendl;
 }
 bool Device::isLoaded()const{
   return m_attached;
 }
 QString Device::devName()const {
   return QString::fromLatin1("hci0");
 };
 void Device::slotExited( OProcess* proc)
 {
   owarn << "prcess exited" << oendl;
   if(proc== m_process ){
     owarn << "proc == m_process" << oendl;
     if( m_process->normalExit() ){ // normal exit
       owarn << "normalExit" << oendl;
       int ret = m_process->exitStatus();
       if( ret == 0 ){ // attached
-    owarn << "attached" << oendl;
-    owarn << "Output: " << m_output.data() << oendl;
-    pid = parsePid( m_output );
-    owarn << "Pid = " << pid << oendl;
-    // now hciconfig hci0 up ( determine hciX FIXME)
-    // and call hciconfig hci0 up
-    // FIXME hardcoded to hci0 now :(
-    m_hci = new OProcess( );
-    *m_hci << "hciconfig";
-    *m_hci << "hci0 up";
-    connect(m_hci, SIGNAL( processExited(Opie::Core::OProcess*) ),
+        owarn << "attached" << oendl;
+        owarn << "Output: " << m_output.data() << oendl;
+        pid = parsePid( m_output );
+        owarn << "Pid = " << pid << oendl;
+        // now hciconfig hci0 up ( determine hciX FIXME)
+        // and call hciconfig hci0 up
+        // FIXME hardcoded to hci0 now :(
+        m_hci = new OProcess( );
+        *m_hci << "hciconfig";
+        *m_hci << "hci0 up";
+        connect(m_hci, SIGNAL( processExited(Opie::Core::OProcess*) ),
                 this, SLOT( slotExited(Opie::Core::OProcess* ) ) );
-    if(!m_hci->start() ){
-      owarn << "could not start" << oendl;
-      m_attached = false;
-      emit device("hci0", false );
-    }
+        if(!m_hci->start() ){
+          owarn << "could not start" << oendl;
+          m_attached = false;
+          emit device("hci0", false );
+        }
       }else{
         owarn << "crass" << oendl;
-    m_attached = false;
-    emit device("hci0", false );
+        m_attached = false;
+        emit device("hci0", false );
 
       }
     }
     delete m_process;
     m_process = 0;
   }else if(proc== m_hci ){
     owarn << "M HCI exited" << oendl;
     if( m_hci->normalExit() ){
       owarn << "normal exit" << oendl;
       int ret = m_hci->exitStatus();
       if( ret == 0 ){
-    owarn << "attached really really attached" << oendl;
-    m_attached = true;
-    emit device("hci0", true );
+        owarn << "attached really really attached" << oendl;
+        m_attached = true;
+        emit device("hci0", true );
       }else{
-    owarn << "failed" << oendl;
-    emit device("hci0", false );
-    m_attached = false;
+        owarn << "failed" << oendl;
+        emit device("hci0", false );
+        m_attached = false;
       }
     }// normal exit
     delete m_hci;
     m_hci = 0;
   }
 }
 void Device::slotStdOut(OProcess* proc, char* chars, int len)
 {
   owarn << "std out" << oendl;
   if( len <1 ){
     owarn << "len < 1 " << oendl;
     return;
diff --git a/noncore/net/opietooth/lib/lib.pro b/noncore/net/opietooth/lib/lib.pro
index 781bf15..e11af9a 100644
--- a/noncore/net/opietooth/lib/lib.pro
+++ b/noncore/net/opietooth/lib/lib.pro
@@ -1,12 +1,15 @@
 TEMPLATE        = lib
 CONFIG          += qte warn_on 
         HEADERS = connection.h parser.h device.h manager.h remotedevice.h services.h \
-                  startpanconnection.h startdunconnection.h bt-serial.h forwarder.h
+                  startpanconnection.h startdunconnection.h obexpush.h \
+                  bt-serial.h forwarder.h
         SOURCES         = connection.cpp parser.cc device.cc manager.cc remotedevice.cc services.cc \
-                  startpanconnection.cpp startdunconnection.cpp bt-serial.c forwarder.cc
+                  startpanconnection.cpp startdunconnection.cpp obexpush.cpp \
+                  bt-serial.c forwarder.cc
+                  
         TARGET  = opietooth1
 INCLUDEPATH += $(OPIEDIR)/include .
         DESTDIR         = $(OPIEDIR)/lib
 LIBS += -lopiecore2
 
 include( $(OPIEDIR)/include.pro )
diff --git a/noncore/net/opietooth/lib/obexpush.cpp b/noncore/net/opietooth/lib/obexpush.cpp
new file mode 100644
index 0000000..e0a4bee
--- a/dev/null
+++ b/noncore/net/opietooth/lib/obexpush.cpp
@@ -0,0 +1,108 @@
+/* $Id$ */
+/* OBEX push functions implementation */
+/***************************************************************************
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ ***************************************************************************/
+#include "obexpush.h"
+
+#include <qfileinfo.h>
+#include <qfile.h>
+
+#include <opie2/odebug.h>
+#include <opie2/odebug.h>
+
+using namespace Opie::Core;
+using namespace OpieTooth;
+
+ObexPush::ObexPush()
+{
+    pushProc = new OProcess();
+    connect(pushProc, SIGNAL(processExited(Opie::Core::OProcess*)),
+        this, SLOT(slotPushExited(Opie::Core::OProcess*)));
+    connect(pushProc, SIGNAL(receivedStdout(Opie::Core::OProcess*, char*, int)),
+        this, SLOT(slotPushOut(Opie::Core::OProcess*, char*, int)));
+    connect(pushProc, SIGNAL(receivedStderr(Opie::Core::OProcess*, char*, int)),
+        this, SLOT(slotPushErr(Opie::Core::OProcess*, char*, int)));
+
+}
+
+ObexPush::~ObexPush()
+{
+    if (pushProc->isRunning())
+        pushProc->kill();
+    delete pushProc;
+    pushProc = NULL;
+}
+
+/**
+ * Function that sends a file
+ * @param mac destination device MAC address
+ * @param port service port number
+ * @param src source file name
+ * @param dst destination file name
+ * @return 0 on success, -1 on error, 1 if sending process is running
+ */
+int ObexPush::send(QString& mac, int port, QString& src, QString& dst)
+{
+    QString dev = mac;
+    QString execName = "ussp-push";
+    if (pushProc->isRunning())
+        return 1;
+    pushProc->clearArguments();
+    dev += "@";
+    dev += QString::number(port); 
+    if (!dst.isEmpty())
+        *pushProc << execName << "--timeo 30" << dev 
+            << QFile::encodeName(src) << QFile::encodeName(dst);
+    else
+        *pushProc << execName << "--timeo 30" << dev 
+            << QFile::encodeName(src) 
+            << QFile::encodeName(QFileInfo(src).fileName());
+    odebug << execName << " " << dev << " " << src << " " 
+        << ((!dst.isEmpty())? dst: QFileInfo(src).fileName()) << oendl;
+    pushProc->setUseShell(true);
+    if (!pushProc->start(OProcess::NotifyOnExit, OProcess::All))
+        return -1;
+    else 
+        return 0;
+}
+
+void ObexPush::slotPushExited(Opie::Core::OProcess* proc)
+{
+    if (pushProc != proc)
+        return;
+    odebug << "Process exited" << oendl;
+    if (pushProc->normalExit())
+        emit sendComplete(pushProc->exitStatus());
+    else
+        emit sendError(-1);
+}
+
+/**
+ * Function makes a notification from slotPushOut and slotPushErr
+ */
+void ObexPush::notifyInfo(Opie::Core::OProcess* proc, char* buf, int len)
+{
+    if (proc != pushProc)
+        return;
+    QCString str(buf, len);
+    odebug << str << oendl;
+    emit status(str);
+}
+
+void ObexPush::slotPushOut(Opie::Core::OProcess* proc, char* buf, int len)
+{
+    notifyInfo(proc, buf, len);
+}
+
+void ObexPush::slotPushErr(Opie::Core::OProcess* proc, char* buf, int len)
+{
+    notifyInfo(proc, buf, len);
+}
+
+//eof
diff --git a/noncore/net/opietooth/lib/obexpush.h b/noncore/net/opietooth/lib/obexpush.h
new file mode 100644
index 0000000..8147643
--- a/dev/null
+++ b/noncore/net/opietooth/lib/obexpush.h
@@ -0,0 +1,77 @@
+/* $Id$ */
+/* OBEX push functions declarations */
+/***************************************************************************
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ ***************************************************************************/
+#ifndef _OBEXPUSH_H_
+#define _OBEXPUSH_H_
+#include <qobject.h>
+#include <qstring.h>
+#include "services.h"
+#include <opie2/oprocess.h>
+namespace OpieTooth {
+    class ObexPush : public QObject {
+        Q_OBJECT
+    public:
+        /**
+         * Constructor which creates an object
+         */
+        ObexPush();
+        
+        /**
+         * Public destructor
+         */
+        ~ObexPush();
+        
+        /**
+         * Function that sends a file
+         * @param mac destination device MAC address
+         * @param port service port number
+         * @param src source file name
+         * @param dst destination file name
+         * @return 0 on success, -1 on error, 1 if sending process is running
+         */
+        int send(QString& mac, int port, QString& src, QString& dst);
+
+        /**
+         * @return true if it's sending and false otherwise
+         */
+         bool isSending() { return pushProc->isRunning(); }
+    signals:
+        /**
+         * Informs that the sending process has completed
+         * @param status the finish status
+         */
+        void sendComplete(int);
+
+        /**
+         * Informs that the sending process has finished with error
+         * @param status the finish status
+         */
+        void sendError(int);
+        
+        /**
+         * Informs that we have a string status update
+         * @param str status string
+         */
+        void status(QCString&);
+    protected slots:
+        void slotPushOut(Opie::Core::OProcess*, char*, int);
+        void slotPushErr(Opie::Core::OProcess*, char*, int);
+        void slotPushExited(Opie::Core::OProcess* proc);
+    protected:
+        /**
+         * Function makes a notification from slotPushOut and slotPushErr
+         */
+        void notifyInfo(Opie::Core::OProcess*, char*, int);
+    protected:
+        Opie::Core::OProcess* pushProc; //The push process
+    };
+};
+#endif
+//eof
diff --git a/noncore/net/opietooth/manager/obexdialog.cpp b/noncore/net/opietooth/manager/obexdialog.cpp
index 8d7b593..4b795b7 100644
--- a/noncore/net/opietooth/manager/obexdialog.cpp
+++ b/noncore/net/opietooth/manager/obexdialog.cpp
@@ -11,35 +11,37 @@
 #include <qpe/resource.h>
 
 #include <opie2/oprocess.h>
 #include <opie2/ofiledialog.h>
 #include <opie2/odebug.h>
 using namespace Opie::Core;
 
 using namespace OpieTooth;
 
 using namespace Opie::Core;
 using namespace Opie::Ui;
 using namespace Opie::Core;
-ObexDialog::ObexDialog(const QString& device, QWidget* parent,  const char* name, bool modal, WFlags fl)
+ObexDialog::ObexDialog(const QString& device, int port, 
+    QWidget* parent,  const char* name, bool modal, WFlags fl)
     : QDialog( parent, name, modal, fl ) {
 
     if ( !name )
         setName( "ObexDialog" );
     setCaption( tr( "beam files " ) ) ;
 
     m_device = device;
+    m_port = port;
 
     layout = new QVBoxLayout( this );
-    obexSend  = new OProcess();
+    obexSend  = new ObexPush();
 
     info = new QLabel( this );
     info->setText( tr("Which file should be beamed?") );
 
     statLine = new QLabel(this);
     statLine->setText( tr("Ready") );
   
     status = new QMultiLineEdit(this);
     status->setReadOnly(true);
     
     cmdLine = new QLineEdit( this );
 
@@ -53,88 +55,68 @@ ObexDialog::ObexDialog(const QString& device, QWidget* parent,  const char* name
     sendButton->setText( tr( "Send" ) );
 
     layout->addWidget(info);
     layout->addWidget(status);
     layout->addWidget(cmdLine);
     layout->addWidget(browserButton);
     layout->addWidget(chNameLine);
     layout->addWidget(sendButton);
     layout->addWidget(statLine);
 
     connect( sendButton, SIGNAL( clicked() ), this,  SLOT( sendData() ) );
 
-    connect(obexSend, SIGNAL(processExited(Opie::Core::OProcess*)),
-        this, SLOT(slotProcessExited(Opie::Core::OProcess*)));
-    connect(obexSend, SIGNAL(receivedStdout(Opie::Core::OProcess*, char*, int)),
-        this, SLOT(slotPushOut(Opie::Core::OProcess*, char*, int)));
-    connect(obexSend, SIGNAL(receivedStderr(Opie::Core::OProcess*, char*, int)),
-        this, SLOT(slotPushErr(Opie::Core::OProcess*, char*, int)));
+    connect(obexSend, SIGNAL(sendComplete(int)),
+        this, SLOT(slotPushComplete(int)));
+    connect(obexSend, SIGNAL(sendError(int)),
+        this, SLOT(slotPushError(int)));
+    connect(obexSend, SIGNAL(status(QCString&)),
+        this, SLOT(slotPushStatus(QCString&)));
 
 }
 
 ObexDialog::~ObexDialog() {
-  if (obexSend->isRunning())
-    obexSend->kill();
   delete obexSend;
   obexSend = NULL;
 }
 
 void ObexDialog::browse() {
 
     MimeTypes types;
     QStringList all;
     all << "*/*";
     types.insert("All Files", all );
 
     QString str = OFileDialog::getOpenFileName( 1,"/","", types, 0 );
     cmdLine->setText( str );
     statLine->setText( tr("Ready") );
 }
 
 void ObexDialog::sendData() {
+    int result; //function call result
     QString fileURL = cmdLine->text();
-    QString file = QFileInfo( fileURL ).fileName();
     QString modifiedName = chNameLine->text();
-    QString execName = "ussp-push";
-
-    if (obexSend->isRunning())
+    result = obexSend->send(m_device, m_port, fileURL, modifiedName);
+    if (result > 0)
         return;
-    obexSend->clearArguments();
-       // vom popupmenu beziehen
-    if ( !modifiedName.isEmpty() ) {
-        *obexSend << execName << "--timeo 30" << m_device << fileURL << modifiedName;
-    } else {
-        *obexSend << execName << "--timeo 30" << m_device << fileURL << file;
-    }
-    obexSend->setUseShell(true);
-    if (!obexSend->start(OProcess::NotifyOnExit, OProcess::All) ) {
+    else if (result < 0)
                     statLine->setText( tr("Error: couln't start process") );
-    }
     else
         statLine->setText( tr("Sending") );
 }
 
-void ObexDialog::slotPushOut(OProcess*, char* buf, int len) {
-  QCString str(buf, len);
+void ObexDialog::slotPushStatus(QCString& str) {
   status->append(str);
 }
 
-void ObexDialog::slotPushErr(OProcess*, char* buf, int len) {
-  QCString str(buf, len);
-  status->append(str);
+void ObexDialog::slotPushComplete(int result) {
+  status->append( tr("Finished with result ") );
+  status->append( QString::number(result) );
+  status->append( tr("\n") );
+  odebug << result << oendl;
+  statLine->setText( tr("Finished: ") + tr(strerror(result)) );
 }
 
-void ObexDialog::slotProcessExited(OProcess*) {
-  if (obexSend == NULL)
-      return;
-  if (obexSend->normalExit()) {
-    status->append( tr("Finished with result ") );
-    status->append( QString::number(obexSend->exitStatus()) );
-    status->append( tr("\n") );
-    odebug << obexSend->exitStatus() << oendl;
-    statLine->setText( tr("Finished: ") + tr(strerror(obexSend->exitStatus())) );
-  }
-  else {
-    status->append( tr("Exited abnormally\n") );
-    statLine->setText( tr("Exited abnormally") );
-  }
+void ObexDialog::slotPushError(int) {
+  status->append( tr("Exited abnormally\n") );
+  statLine->setText( tr("Exited abnormally") );
 }
+//eof
diff --git a/noncore/net/opietooth/manager/obexdialog.h b/noncore/net/opietooth/manager/obexdialog.h
index 44a26f3..063b7f1 100644
--- a/noncore/net/opietooth/manager/obexdialog.h
+++ b/noncore/net/opietooth/manager/obexdialog.h
@@ -1,48 +1,51 @@
 #ifndef OBEXDIALOG_H
 #define OBEXDIALOG_H
 
 
 #include <qdialog.h>
-#include <opie2/oprocess.h>
 #include <qlabel.h>
 #include <qmultilineedit.h>
+#include "obexpush.h"
 
 class QVBoxLayout;
 class QPushButton;
 class QMultiLineEdit;
 class QLineEdit;
 
 namespace Opie {namespace Core {class OProcess;}}
 namespace OpieTooth {
 
     class ObexDialog : public QDialog {
 
         Q_OBJECT
 
     public:
-        ObexDialog( const QString& device = 0, QWidget* parent = 0, const char* name = 0, bool modal = TRUE, WFlags fl = 0);
+        ObexDialog( const QString& device = 0, int port = 0, 
+            QWidget* parent = 0, const char* name = 0, 
+            bool modal = TRUE, WFlags fl = 0);
         ~ObexDialog();
 
 
 private slots:
         void browse();
         void sendData();
-        void slotPushOut(Opie::Core::OProcess*, char*, int);
-        void slotPushErr(Opie::Core::OProcess*, char*, int);
-                void slotProcessExited(Opie::Core::OProcess* proc);   
+        void slotPushStatus(QCString&);
+        void slotPushComplete(int);
+        void slotPushError(int);
         
     protected:
         QVBoxLayout* layout;
         QLineEdit* cmdLine;
         QLineEdit* chNameLine;
         QPushButton* sendButton;
         QLabel* info;
         QMultiLineEdit* status;
         QLabel* statLine;
     private:
         // Device that is used
         QString m_device;
-        Opie::Core::OProcess *obexSend;
+        int m_port; //Port used
+        ObexPush* obexSend;
     };
 }
 #endif
diff --git a/noncore/net/opietooth/manager/obexftpdialog.cpp b/noncore/net/opietooth/manager/obexftpdialog.cpp
index efb3ff2..2a578ac 100644
--- a/noncore/net/opietooth/manager/obexftpdialog.cpp
+++ b/noncore/net/opietooth/manager/obexftpdialog.cpp
@@ -234,25 +234,25 @@ void ObexFtpDialog::slotCd(QListViewItem* item)
             idx = curdir.findRev('/');
             if (idx >= 0)
                 curdir.remove(idx, curdir.length() - idx);
             else
                 curdir = "";
         }
         else {
             if (curdir != "" && curdir.right(1) != "/")
                 curdir += "/";
             curdir += file->text(0);
         }
         odebug << "Browse " << curdir << oendl;
-        if (obexftp_setpath(client, curdir, 0) < 0)
+        if (obexftp_setpath(client, QFile::encodeName(curdir), 0) < 0)
             log(tr("CD failed: ") + tr(strerror(errno)));
         doBrowse();
     }
 }
 
 /*
  * Copy file from a remote device to the local device
  */
 void ObexFtpDialog::getFile()
 {
     FileListItem* file = (FileListItem*)fileList->selectedItem();
     int result;
diff --git a/noncore/net/opietooth/manager/obexpopup.cpp b/noncore/net/opietooth/manager/obexpopup.cpp
index d1d1b4a..759a452 100644
--- a/noncore/net/opietooth/manager/obexpopup.cpp
+++ b/noncore/net/opietooth/manager/obexpopup.cpp
@@ -9,41 +9,39 @@ using namespace Opie::Core;
 
 /* QT */
 #include <qtimer.h>
 
 using namespace OpieTooth;
 
 /*
  * c'tor init the QAction
  */
 ObexPopup::ObexPopup(const OpieTooth::Services& service,  OpieTooth::BTDeviceItem* item)
         : QPopupMenu(), m_service(service)
 {
-    owarn << "ObexPopup c'tor" << oendl; 
+    odebug << "ObexPopup c'tor" << oendl; 
 
     m_item = item;
     /* connect action */
     m_push = new QAction( ); // so it's get deleted
     m_push->setText("Push file");
     m_push->addTo( this );
     connect(m_push, SIGNAL(activated()), SLOT(slotPush()));
 }
 
 
 ObexPopup::~ObexPopup()
 {
     delete m_push;
 }
 
 
 void ObexPopup::slotPush()
 {
     QString device = m_item->mac();
     int port = m_service.protocolDescriptorList().last().port();
-    device += "@";
-    device += QString::number(port);
-    owarn << "push something to " << device << oendl; 
-    ObexDialog obexDialog(device);
+    odebug << "push something to " << device << " " << port << oendl; 
+    ObexDialog obexDialog(device, port);
     QPEApplication::execDialog( &obexDialog );
 }