1 files changed, 2 insertions, 2 deletions

diff --git a/noncore/settings/networksettings/ppp/general.cpp b/noncore/settings/networksettings/ppp/general.cpp
index ff1b11b..81dab38 100644
--- a/noncore/settings/networksettings/ppp/general.cpp
+++ b/noncore/settings/networksettings/ppp/general.cpp
@@ -1,184 +1,184 @@
 /*
  *            kPPP: A pppd front end for the KDE project
  *
  * $Id$
  *
  *            Copyright (C) 1997 Bernd Johannes Wuebben
  *                   wuebben@math.cornell.edu
  *
  * based on EzPPP:
  * Copyright (C) 1997  Jay Painter
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Library General Public
  * License as published by the Free Software Foundation; either
  * version 2 of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * Library General Public License for more details.
  *
  * You should have received a copy of the GNU Library General Public
  * License along with this program; if not, write to the Free
  * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include "general.h"
 #include "interfaceppp.h"
 #include "modeminfo.h"
 #include "modemcmds.h"
 #include "pppdata.h"
 
 /* OPIE */
 #include <qpe/config.h>
 #include <qpe/qpeapplication.h>
 
 /* QT */
 #include <qcheckbox.h>
 #include <qcombobox.h>
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qpushbutton.h>
 #include <qslider.h>
 #include <qspinbox.h>
 #include <qwhatsthis.h>
 
 /* STD */
 #include <termios.h>
 #include <string.h>
 
 
 ModemWidget::ModemWidget( PPPData *pd, QWidget *parent, const char *name )
         : QWidget(parent, name), _pppdata(pd)
 {
     int k;
 
     QGridLayout *tl = new QGridLayout(this, 8, 2, 0 );//, KDialog::spacingHint());
 
     QLabel *label1;
 
     label1 = new QLabel(tr("Modem &name:"), this);
     tl->addWidget(label1, 0, 0);
 
     modemname = new QLineEdit(this, "modemName");
     modemname->setText( _pppdata->devname() );
     label1->setBuddy(modemname);
     tl->addWidget(modemname, 0, 1);
 
     label1 = new QLabel(tr("Modem de&vice:"), this);
     tl->addWidget(label1, 1, 0);
 
     modemdevice = new QComboBox(false, this);
     modemdevice->setEditable( true );
     modemdevice->setDuplicatesEnabled ( false );
     modemdevice->setInsertionPolicy( QComboBox::AtTop );
     label1->setBuddy(modemdevice);
 
     Config cfg("NetworkSetupPPP");
     cfg.setGroup("Devices_General");
     QStringList devs = cfg.readListEntry("devices",',');
     if (devs.isEmpty()) devs << "/dev/modem" << "/dev/ircomm0" << "/dev/ttyS0";
     modemdevice->insertStringList( devs );
     tl->addWidget(modemdevice, 1, 1);
 
     //   connect(modemdevice, SIGNAL(activated(int)),
             //   SLOT(setmodemdc(int)));
-    //   connect(modemdevice, SIGNAL(textChanged( const QString & ) ),
-    //           SLOT( setmodemdc( const QString &) ) );
+    //   connect(modemdevice, SIGNAL(textChanged(const QString&) ),
+    //           SLOT( setmodemdc(const QString&) ) );
 
     QString tmp = tr("This specifies the serial port your modem is attached \n"
                      "to. On Linux/x86, typically this is either /dev/ttyS0 \n"
                      "(COM1 under DOS) or /dev/ttyS1 (COM2 under DOS).\n"
                      "\n"
                      "If you have an internal ISDN card with AT command\n"
                      "emulation (most cards under Linux support this), you\n"
                      "should select one of the /dev/ttyIx devices.");
 
     QWhatsThis::add(label1,tmp);
     QWhatsThis::add(modemdevice,tmp);
 
 
     label1 = new QLabel(tr("&Flow control:"), this);
     tl->addWidget(label1, 2, 0);
 
     flowcontrol = new QComboBox(false, this);
     label1->setBuddy(flowcontrol);
     flowcontrol->insertItem(tr("Hardware [CRTSCTS]"));
     flowcontrol->insertItem(tr("Software [XON/XOFF]"));
     flowcontrol->insertItem(tr("None"));
     tl->addWidget(flowcontrol, 2, 1);
     //   connect(flowcontrol, SIGNAL(activated(int)),
             //   SLOT(setflowcontrol(int)));
 
     tmp = tr("<p>Specifies how the serial port and modem\n"
              "communicate. You should not change this unless\n"
              "you know what you are doing.\n"
              "\n"
              "<b>Default</b>: CRTSCTS");
 
     QWhatsThis::add(label1,tmp);
     QWhatsThis::add(flowcontrol,tmp);
 
     QLabel *labelenter = new QLabel(tr("&Line termination:"), this);
     tl->addWidget(labelenter, 3, 0);
 
     enter = new QComboBox(false, this);
     labelenter->setBuddy(enter);
     enter->insertItem("CR");
     enter->insertItem("LF");
     enter->insertItem("CR/LF");
     tl->addWidget(enter, 3, 1);
     //  connect(enter, SIGNAL(activated(int)), SLOT(setenter(int)));
     tmp = tr("<p>Specifies how AT commands are sent to your\n"
              "modem. Most modems will work fine with the\n"
              "default <i>CR/LF</i>. If your modem does not react\n"
              "to the init string, you should try different\n"
              "settings here\n"
              "\n"
              "<b>Default</b>: CR/LF");
 
     QWhatsThis::add(labelenter,tmp);
     QWhatsThis::add(enter, tmp);
 
     QLabel *baud_label = new QLabel(tr("Co&nnection speed:"), this);
     tl->addWidget(baud_label, 4, 0);
     baud_c = new QComboBox(this);
     baud_label->setBuddy(baud_c);
 
     static const char *baudrates[] =
         {
 
 #ifdef B460800
             "460800",
 #endif
 
 #ifdef B230400
             "230400",
 #endif
 
 #ifdef B115200
             "115200",
 #endif
 
 #ifdef B57600
             "57600",
 #endif
 
             "38400",
             "19200",
             "9600",
             "2400",
             0
         };
 
     for(k = 0; baudrates[k]; k++)
         baud_c->insertItem(baudrates[k]);
 
     baud_c->setCurrentItem(3);
     //   connect(baud_c, SIGNAL(activated(int)),
             //   this, SLOT(speed_selection(int)));
     tl->addWidget(baud_c, 4, 1);
 
     tmp = tr("Specifies the speed your modem and the serial\n"
              "port talk to each other. You should begin with\n"