Diffstat (limited to 'noncore/settings/networksettings/ppp/general.cpp') (more/less context) (ignore whitespace changes)
| -rw-r--r-- | noncore/settings/networksettings/ppp/general.cpp | 421 |
1 files changed, 421 insertions, 0 deletions
diff --git a/noncore/settings/networksettings/ppp/general.cpp b/noncore/settings/networksettings/ppp/general.cpp new file mode 100644 index 0000000..f803628 --- a/dev/null +++ b/noncore/settings/networksettings/ppp/general.cpp @@ -0,0 +1,421 @@ +/* + * kPPP: A pppd front end for the KDE project + * + * $Id$ + * + * Copyright (C) 1997 Bernd Johannes Wuebben + * wuebben@math.cornell.edu + * + * based on EzPPP: + * Copyright (C) 1997 Jay Painter + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + * + * You should have received a copy of the GNU Library General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <termios.h> +#include <string.h> +#include <qwhatsthis.h> + +#include "knuminput.h" +#include <qslider.h> +#include <qlayout.h> +#include "general.h" +//#include "version.h" +//#include "miniterm.h" +#include "modeminfo.h" +#include "modemcmds.h" +#include "devices.h" +#include "pppdata.h" +//#include <klocale.h> +#define i18n QObject::tr + + + +ModemWidget::ModemWidget( QWidget *parent, const char *name) + : QWidget(parent, name) +{ + int k; + + QGridLayout *tl = new QGridLayout(this, 8, 2, 0 );//, KDialog::spacingHint()); + + label1 = new QLabel(i18n("Modem de&vice:"), this); + tl->addWidget(label1, 0, 0); + + modemdevice = new QComboBox(false, this); + label1->setBuddy(modemdevice); + + for(k = 0; devices[k]; k++) + modemdevice->insertItem(devices[k]); + + tl->addWidget(modemdevice, 0, 1); + connect(modemdevice, SIGNAL(activated(int)), + SLOT(setmodemdc(int))); + QString tmp = i18n("This specifies the serial port your modem is attached \n" + "to. On Linux/x86, typically this is either /dev/ttyS0 \n" + "(COM1 under DOS) or /dev/ttyS1 (COM2 under DOS).\n" + "\n" + "If you have an internal ISDN card with AT command\n" + "emulation (most cards under Linux support this), you\n" + "should select one of the /dev/ttyIx devices."); + + QWhatsThis::add(label1,tmp); + QWhatsThis::add(modemdevice,tmp); + + + label2 = new QLabel(i18n("&Flow control:"), this); + tl->addWidget(label2, 1, 0); + + flowcontrol = new QComboBox(false, this); + label2->setBuddy(flowcontrol); + flowcontrol->insertItem(i18n("Hardware [CRTSCTS]")); + flowcontrol->insertItem(i18n("Software [XON/XOFF]")); + flowcontrol->insertItem(i18n("None")); + tl->addWidget(flowcontrol, 1, 1); + connect(flowcontrol, SIGNAL(activated(int)), + SLOT(setflowcontrol(int))); + + tmp = i18n("<p>Specifies how the serial port and modem\n" + "communicate. You should not change this unless\n" + "you know what you are doing.\n" + "\n" + "<b>Default</b>: CRTSCTS"); + + QWhatsThis::add(label2,tmp); + QWhatsThis::add(flowcontrol,tmp); + + labelenter = new QLabel(i18n("&Line termination:"), this); + tl->addWidget(labelenter, 2, 0); + + enter = new QComboBox(false, this); + labelenter->setBuddy(enter); + enter->insertItem("CR"); + enter->insertItem("LF"); + enter->insertItem("CR/LF"); + tl->addWidget(enter, 2, 1); + connect(enter, SIGNAL(activated(int)), SLOT(setenter(int))); + tmp = i18n("<p>Specifies how AT commands are sent to your\n" + "modem. Most modems will work fine with the\n" + "default <i>CR/LF</i>. If your modem does not react\n" + "to the init string, you should try different\n" + "settings here\n" + "\n" + "<b>Default</b>: CR/LF"); + + QWhatsThis::add(labelenter,tmp); + QWhatsThis::add(enter, tmp); + + baud_label = new QLabel(i18n("Co&nnection speed:"), this); + tl->addWidget(baud_label, 3, 0); + baud_c = new QComboBox(this); + baud_label->setBuddy(baud_c); + + static const char *baudrates[] = { + +#ifdef B460800 + "460800", +#endif + +#ifdef B230400 + "230400", +#endif + +#ifdef B115200 + "115200", +#endif + +#ifdef B57600 + "57600", +#endif + + "38400", + "19200", + "9600", + "2400", + 0}; + + for(k = 0; baudrates[k]; k++) + baud_c->insertItem(baudrates[k]); + + baud_c->setCurrentItem(3); + connect(baud_c, SIGNAL(activated(int)), + this, SLOT(speed_selection(int))); + tl->addWidget(baud_c, 3, 1); + + tmp = i18n("Specifies the speed your modem and the serial\n" + "port talk to each other. You should begin with\n" + "the default of 38400 bits/sec. If everything\n" + "works you can try to increase this value, but to\n" + "no more than 115200 bits/sec (unless you know\n" + "that your serial port supports higher speeds)."); + + QWhatsThis::add(baud_label,tmp); + QWhatsThis::add(baud_c,tmp); + + for(int i=0; i <= enter->count()-1; i++) { + if(gpppdata.enter() == enter->text(i)) + enter->setCurrentItem(i); + } + + tl->addRowSpacing(4, 10); + + //Modem Lock File + modemlockfile = new QCheckBox(i18n("&Use lock file"), this); + + modemlockfile->setChecked(gpppdata.modemLockFile()); + connect(modemlockfile, SIGNAL(toggled(bool)), + SLOT(modemlockfilechanged(bool))); + tl->addMultiCellWidget(modemlockfile, 5, 5, 0, 1); + // l12->addStretch(1); + QWhatsThis::add(modemlockfile, + i18n("<p>To prevent other programs from accessing the\n" + "modem while a connection is established, a\n" + "file can be created to indicate that the modem\n" + "is in use. On Linux an example file would be\n" + "<tt>/var/lock/LCK..ttyS1</tt>\n" + "Here you can select whether this locking will\n" + "be done.\n" + "\n" + "<b>Default</b>: On")); + + // Modem Timeout Line Edit Box + + modemtimeout = new KIntNumInput(gpppdata.modemTimeout(), this); + modemtimeout->setLabel(i18n("Modem &timeout:")); + modemtimeout->setRange(1, 120, 1); + modemtimeout->setSuffix(i18n(" sec")); + connect(modemtimeout, SIGNAL(valueChanged(int)), + SLOT(modemtimeoutchanged(int))); + tl->addMultiCellWidget(modemtimeout, 6, 6, 0, 1); + + QWhatsThis::add(modemtimeout, + i18n("This specifies how long <i>kppp</i> waits for a\n" + "<i>CONNECT</i> response from your modem. The\n" + "recommended value is 30 seconds.")); + + //set stuff from gpppdata + for(int i=0; i <= enter->count()-1; i++) { + if(gpppdata.enter() == enter->text(i)) + enter->setCurrentItem(i); + } + + for(int i=0; i <= modemdevice->count()-1; i++) { + if(gpppdata.modemDevice() == modemdevice->text(i)) + modemdevice->setCurrentItem(i); + } + + for(int i=0; i <= flowcontrol->count()-1; i++) { + if(gpppdata.flowcontrol() == flowcontrol->text(i)) + flowcontrol->setCurrentItem(i); + } + + //set the modem speed + for(int i=0; i < baud_c->count(); i++) + if(baud_c->text(i) == gpppdata.speed()) + baud_c->setCurrentItem(i); + + tl->setRowStretch(7, 1); +} + + +void ModemWidget::speed_selection(int) { + gpppdata.setSpeed(baud_c->text(baud_c->currentItem())); +} + + +void ModemWidget::setenter(int ) { + gpppdata.setEnter(enter->text(enter->currentItem())); +} + + +void ModemWidget::setmodemdc(int i) { + gpppdata.setModemDevice(modemdevice->text(i)); +} + + +void ModemWidget::setflowcontrol(int i) { + gpppdata.setFlowcontrol(flowcontrol->text(i)); +} + + +void ModemWidget::modemlockfilechanged(bool set) { + gpppdata.setModemLockFile(set); +} + + +void ModemWidget::modemtimeoutchanged(int n) { + gpppdata.setModemTimeout(n); +} + + +ModemWidget2::ModemWidget2( QWidget *parent, const char *name) + : QWidget(parent, name) +{ + QVBoxLayout *l1 = new QVBoxLayout(this, 0 );//, KDialog::spacingHint()); + + + waitfordt = new QCheckBox(i18n("&Wait for dial tone before dialing"), this); + waitfordt->setChecked(gpppdata.waitForDialTone()); + connect(waitfordt, SIGNAL(toggled(bool)), SLOT(waitfordtchanged(bool))); + l1->addWidget(waitfordt); + QWhatsThis::add(waitfordt, + i18n("<p>Normally the modem waits for a dial tone\n" + "from your phone line, indicating that it can\n" + "start to dial a number. If your modem does not\n" + "recognize this sound, or your local phone system\n" + "does not emit such a tone, uncheck this option\n" + "\n" + "<b>Default:</b>: On")); + + busywait = new KIntNumInput(gpppdata.busyWait(), this); + busywait->setLabel(i18n("B&usy wait:")); + busywait->setRange(0, 300, 5, true); + busywait->setSuffix(i18n(" sec")); + connect(busywait, SIGNAL(valueChanged(int)), SLOT(busywaitchanged(int))); + l1->addWidget(busywait); + + QWhatsThis::add(busywait, + i18n("Specifies the number of seconds to wait before\n" + "redial if all dialed numbers are busy. This is\n" + "necessary because some modems get stuck if the\n" + "same number is busy too often.\n" + "\n" + "The default is 0 seconds, you should not change\n" + "this unless you need to.")); + + l1->addSpacing(10); + + QHBoxLayout *hbl = new QHBoxLayout; + hbl->setSpacing(2);//KDialog::spacingHint()); + + QLabel *volumeLabel = new QLabel(i18n("Modem &volume:"), this); + hbl->addWidget(volumeLabel); + volume = new QSlider(0, 2, 1, gpppdata.volume(), QSlider::Horizontal, this); + volumeLabel->setBuddy(volume); + volume->setTickmarks(QSlider::Below); + hbl->addWidget(volume); + + l1->addLayout(hbl); + + connect(volume, SIGNAL(valueChanged(int)), + this, SLOT(volumeChanged(int))); + QString tmp = i18n("Most modems have a speaker which makes\n" + "a lot of noise when dialing. Here you can\n" + "either turn this completely off or select a\n" + "lower volume.\n" + "\n" + "If this does not work for your modem,\n" + "you must modify the modem volume command."); + + QWhatsThis::add(volumeLabel,tmp); + QWhatsThis::add(volume, tmp); + + l1->addSpacing(20); + +#if 0 + chkbox1 = new QCheckBox(i18n("Modem asserts CD line"), this); + chkbox1->setChecked(gpppdata.UseCDLine()); + connect(chkbox1,SIGNAL(toggled(bool)), + this,SLOT(use_cdline_toggled(bool))); + l12->addWidget(chkbox1); + l12->addStretch(1); + l1->addStretch(1); + QWhatsThis::add(chkbox1, + i18n("This controls how <i>kppp</i> detects that the modem\n" + "is not responding. Unless you are having\n" + "problems with this, do not modify this setting.\n" + "\n" + "<b>Default</b>: Off")); +#endif + + modemcmds = new QPushButton(i18n("Mod&em Commands..."), this); + QWhatsThis::add(modemcmds, + i18n("Allows you to change the AT command for\n" + "your modem.")); + + modeminfo_button = new QPushButton(i18n("&Query Modem..."), this); + QWhatsThis::add(modeminfo_button, + i18n("Most modems support the ATI command set to\n" + "find out vendor and revision of your modem.\n" + "\n" + "Press this button to query your modem for\n" + "this information. It can be useful to help\n" + "you setup the modem")); + +// terminal_button = new QPushButton(i18n("&Terminal..."), this); +// QWhatsThis::add(terminal_button, +// i18n("Opens the built-in terminal program. You\n" +// "can use this if you want to play around\n" +// "with your modem's AT command set")); + + QHBoxLayout *hbox = new QHBoxLayout(); + l1->addLayout(hbox); + hbox->addStretch(1); + QVBoxLayout *vbox = new QVBoxLayout(); + hbox->addLayout(vbox); + + vbox->addWidget(modemcmds); + vbox->addWidget(modeminfo_button); +// vbox->addWidget(terminal_button); + + hbox->addStretch(1); + l1->addStretch(1); + + connect(modemcmds, SIGNAL(clicked()), + SLOT(modemcmdsbutton())); + connect(modeminfo_button, SIGNAL(clicked()), + SLOT(query_modem())); +// connect(terminal_button, SIGNAL(clicked()), +// SLOT(terminal())); +} + + +void ModemWidget2::modemcmdsbutton() { + ModemCommands mc(this); + mc.showMaximized(); + mc.exec(); +} + + +void ModemWidget2::query_modem() { + ModemTransfer mt(this); + mt.exec(); +} + + +// void ModemWidget2::terminal() { +// MiniTerm terminal(NULL,NULL); +// terminal.exec(); +// } + + +#if 0 +void ModemWidget2::use_cdline_toggled(bool on) { + gpppdata.setUseCDLine(on); +} +#endif + +void ModemWidget2::waitfordtchanged(bool b) { + gpppdata.setWaitForDialTone((int)b); +} + +void ModemWidget2::busywaitchanged(int n) { + gpppdata.setbusyWait(n); +} + + +void ModemWidget2::volumeChanged(int v) { + gpppdata.setVolume(v); +} + |