1 files changed, 24 insertions, 24 deletions

diff --git a/noncore/settings/networksettings/ppp/modem.cpp b/noncore/settings/networksettings/ppp/modem.cpp
index 3dbc8c3..f3f2639 100644
--- a/noncore/settings/networksettings/ppp/modem.cpp
+++ b/noncore/settings/networksettings/ppp/modem.cpp
@@ -46,25 +46,25 @@
 #ifndef _PATH_RESCONF
 #define _PATH_RESCONF "/etc/resolv.conf"
 #endif
 
 #define strlcpy strcpy
 #include "auth.h"
 #include "modem.h"
 #include "pppdata.h"
 #define qError qDebug
 
 
 #define MY_ASSERT(x)  if (!(x)) { \
-        qFatal( "ASSERT: \"%s\" in %s (%d)\n",#x,__FILE__,__LINE__); \
+        ofatal << "ASSERT: \"" << #x << "\" in " << __FILE__ << " (" << __LINE__ << ")\n" << oendl;  \
         exit(1); }
 
 
 static sigjmp_buf jmp_buffer;
 
 //Modem *Modem::modem = 0;
 
 
 const char* pppdPath() {
   // wasting a few bytes
   static char buffer[sizeof(PPPDSEARCHPATH)+sizeof(PPPDNAME)];
   static char *pppdPath = 0L;
@@ -156,25 +156,25 @@ speed_t Modem::modemspeed() {
     return B38400;
     break;
   }
 }
 
 bool Modem::opentty() {
   //  int flags;
 
 //begin  if((modemfd = Requester::rq->openModem(gpppdata.modemDevice()))<0) {
     close(modemfd);
     device = _pppdata->modemDevice();
     if ((modemfd = open(device, O_RDWR|O_NDELAY|O_NOCTTY)) == -1) {
-        qDebug("error opening modem device !");
+        odebug << "error opening modem device !" << oendl; 
         errmsg = QObject::tr("Unable to open modem.");
         return false;
     }
 //bend  if((modemfd = Requester::rq->openModem(gpppdata.modemDevice()))<0) {
 //}
 
 #if 0
   if(_pppdata->UseCDLine()) {
     if(ioctl(modemfd, TIOCMGET, &flags) == -1) {
       errmsg = QObject::tr("Unable to detect state of CD line.");
       ::close(modemfd);
       modemfd = -1;
@@ -297,56 +297,56 @@ void Modem::notify(const QObject *receiver, const char *member) {
 
 void Modem::stop() {
   disconnect(SIGNAL(charWaiting(unsigned char)));
   stopNotifier();
 }
 
 
 void Modem::startNotifier() {
   if(modemfd >= 0) {
     if(sn == 0) {
       sn = new QSocketNotifier(modemfd, QSocketNotifier::Read, this);
       connect(sn, SIGNAL(activated(int)), SLOT(readtty(int)));
-      qDebug("QSocketNotifier started!");
+      odebug << "QSocketNotifier started!" << oendl; 
     } else {
-        qDebug("QSocketNotifier re-enabled!");
+        odebug << "QSocketNotifier re-enabled!" << oendl; 
         sn->setEnabled(true);
     }
   }
 }
 
 
 void Modem::stopNotifier() {
   if(sn != 0) {
     sn->setEnabled(false);
     disconnect(sn);
     delete sn;
     sn = 0;
-    qDebug( "QSocketNotifier stopped!" );
+    odebug << "QSocketNotifier stopped!" << oendl; 
   }
 }
 
 
 void Modem::flush() {
   char c;
   while(read(modemfd, &c, 1) == 1);
 }
 
 
 bool Modem::writeChar(unsigned char c) {
   int s;
   do {
     s = write(modemfd, &c, 1);
     if (s < 0) {
-      qError( "write() in Modem::writeChar failed" );
+      oerr << "write() in Modem::writeChar failed" << oendl; 
       return false;
     }
   } while(s == 0);
 
   return true;
 }
 
 
 bool Modem::writeLine(const char *buf) {
   int len = strlen(buf);
   char *b = new char[len+2];
   memcpy(b, buf, len);
@@ -356,25 +356,25 @@ bool Modem::writeLine(const char *buf) {
     b[len++]='\n';
   else if(term == "CR")
     b[len++]='\r';
   else if(term == "CR/LF") {
     b[len++]='\r';
     b[len++]='\n';
   }
   int l = len;
   while(l) {
     int wr = write(modemfd, &b[len-l], l);
     if(wr < 0) {
       // TODO do something meaningful with the error code (or ignore it
-      qError( "write() in Modem::writeLine failed" );
+      oerr << "write() in Modem::writeLine failed" << oendl; 
       delete[] b;
       return false;
     }
     l -= wr;
   }
   delete[] b;
   return true;
 }
 
 
 bool Modem::hangup() {
   // this should really get the modem to hang up and go into command mode
@@ -465,25 +465,25 @@ void Modem::escape_to_command_mode() {
 const QString Modem::modemMessage() {
   return errmsg;
 }
 
 
 QString Modem::parseModemSpeed(const QString &s) {
   // this is a small (and bad) parser for modem speeds
   int rx = -1;
   int tx = -1;
   int i;
   QString result;
 
-  qDebug( "Modem reported result string: %s", s.latin1());
+  odebug << "Modem reported result string: " << s.latin1() << "" << oendl; 
 
   const int RXMAX = 7;
   const int TXMAX = 2;
   QRegExp rrx[RXMAX] = {
     QRegExp("[0-9]+[:/ ]RX", false),
     QRegExp("[0-9]+RX", false),
     QRegExp("[/: -][0-9]+[/: ]", false),
     QRegExp("[/: -][0-9]+$", false),
     QRegExp("CARRIER [^0-9]*[0-9]+", false),
     QRegExp("CONNECT [^0-9]*[0-9]+", false),
     QRegExp("[0-9]+") // panic mode
   };
@@ -551,131 +551,131 @@ QString Modem::parseModemSpeed(const QString &s) {
     }
   }
 
   if(rx == -1 && tx == -1)
     result = QObject::tr("Unknown speed");
   else if(tx == -1)
     result.setNum(rx);
   else if(rx == -1) // should not happen
     result.setNum(tx);
   else
     result.sprintf("%d/%d", rx, tx);
 
-  qDebug( "The parsed result is: %s", result.latin1());
+  odebug << "The parsed result is: " << result.latin1() << "" << oendl; 
 
   return result;
 }
 
 
 // Lock modem device. Returns 0 on success 1 if the modem is locked and -1 if
 // a lock file can't be created ( permission problem )
 int Modem::lockdevice() {
   int fd;
   char newlock[80]=""; // safe
 
   if(!_pppdata->modemLockFile()) {
-    qDebug("The user doesn't want a lockfile.");
+    odebug << "The user doesn't want a lockfile." << oendl; 
     return 0;
   }
 
   if (modem_is_locked)
     return 1;
 
   QString lockfile = LOCK_DIR"/LCK..";
   lockfile += _pppdata->modemDevice().mid(5); // append everything after /dev/
 
   if(access(QFile::encodeName(lockfile), F_OK) == 0) {
 //    if ((fd = Requester::rq->
 if ((fd = openLockfile(QFile::encodeName(lockfile), O_RDONLY)) >= 0) {
       // Mario: it's not necessary to read more than lets say 32 bytes. If
       // file has more than 32 bytes, skip the rest
       char oldlock[33]; // safe
       int sz = read(fd, &oldlock, 32);
       close (fd);
       if (sz <= 0)
         return 1;
       oldlock[sz] = '\0';
 
-      qDebug( "Device is locked by: %s", oldlock);
+      odebug << "Device is locked by: " << oldlock << "" << oendl; 
 
       int oldpid;
       int match = sscanf(oldlock, "%d", &oldpid);
 
       // found a pid in lockfile ?
       if (match < 1 || oldpid <= 0)
         return 1;
 
       // check if process exists
       if (kill((pid_t)oldpid, 0) == 0 || errno != ESRCH)
         return 1;
 
-      qDebug( "lockfile is stale" );
+      odebug << "lockfile is stale" << oendl; 
     }
   }
 
   fd = openLockfile(_pppdata->modemDevice(),O_WRONLY|O_TRUNC|O_CREAT);
   if(fd >= 0) {
     sprintf(newlock,"%010d\n", getpid());
-    qDebug("Locking Device: %s", newlock);
+    odebug << "Locking Device: " << newlock << "" << oendl; 
 
     write(fd, newlock, strlen(newlock));
     close(fd);
     modem_is_locked=true;
 
     return 0;
   }
 
   return -1;
 
 }
 
 
 // UnLock modem device
 void Modem::unlockdevice() {
   if (modem_is_locked) {
-    qDebug( "UnLocking Modem Device" );
+    odebug << "UnLocking Modem Device" << oendl; 
     close(modemfd);
     modemfd = -1;
     unlink(lockfile);
     lockfile[0] = '\0';
     modem_is_locked=false;
   }
 }
 
 int Modem::openLockfile( QString lockfile, int flags)
 {
     int fd;
     int mode;
     flags = O_RDONLY;
     if(flags == O_WRONLY|O_TRUNC|O_CREAT)
         mode = 0644;
     else
         mode = 0;
 
     lockfile = LOCK_DIR;
     lockfile += "/LCK..";
     lockfile += device.right( device.length() - device.findRev("/") -1 );
-    qDebug("lockfile >%s<",lockfile.latin1());
+    odebug << "lockfile >" << lockfile.latin1() << "<" << oendl; 
     // TODO:
     //   struct stat st;
     //   if(stat(lockfile.data(), &st) == -1) {
     //     if(errno == EBADF)
     //       return -1;
     //   } else {
     //     // make sure that this is a regular file
     //     if(!S_ISREG(st.st_mode))
     //       return -1;
     //   }
     if ((fd = open(lockfile, flags, mode)) == -1) {
-        qDebug("error opening lockfile!");
+        odebug << "error opening lockfile!" << oendl; 
         lockfile = QString::null;
         fd = open(DEVNULL, O_RDONLY);
     } else
         fchown(fd, 0, 0);
     return fd;
 }
 
 
 
 void alarm_handler(int) {
   //  fprintf(stderr, "alarm_handler(): Received SIGALRM\n");
 
@@ -918,60 +918,60 @@ bool Modem::execpppd(const char *arguments) {
           fprintf(stderr, "Kernel does not support ppp, oops.\n");
           break;
         case 0:
           fprintf(stderr, "Kernel supports ppp alright.\n");
           break;
       }
 
       execve(pppdPath(), args, 0L);
       _exit(0);
       break;
 
     default:
-      qDebug("In parent: pppd pid %d\n",pppdPid);
+      odebug << "In parent: pppd pid " << pppdPid << "\n" << oendl; 
       close(modemfd);
 
       ::close( m_pppdLOG[1] );
       // set it to nonblocking io
       int flag = ::fcntl( m_pppdLOG[0], F_GETFL );
 
       if ( !(flag & O_NONBLOCK) ) {
-          qDebug("Setting nonblocking io");
+          odebug << "Setting nonblocking io" << oendl; 
           flag |= O_NONBLOCK;
           ::fcntl(m_pppdLOG[0], F_SETFL, flag );
       }
 
       delete m_modemDebug;
       m_modemDebug = new QSocketNotifier(m_pppdLOG[0], QSocketNotifier::Read, this );
       connect(m_modemDebug, SIGNAL(activated(int) ),
               this, SLOT(slotModemDebug(int) ) );
 
       modemfd = -1;
       m_pppdDev = QString::fromLatin1("ppp0");
       return true;
       break;
     }
 }
 
 
 bool Modem::killpppd() {
-    qDebug("In killpppd and pid is %d", pppdPid );
+    odebug << "In killpppd and pid is " << pppdPid << "" << oendl; 
   if(pppdPid > 0) {
     delete m_modemDebug;
     m_modemDebug = 0;
-    qDebug("In killpppd(): Sending SIGTERM to %d\n", pppdPid);
+    odebug << "In killpppd(): Sending SIGTERM to " << pppdPid << "\n" << oendl; 
     if(kill(pppdPid, SIGTERM) < 0) {
-      qDebug("Error terminating %d. Sending SIGKILL\n", pppdPid);
+      odebug << "Error terminating " << pppdPid << ". Sending SIGKILL\n" << oendl; 
       if(kill(pppdPid, SIGKILL) < 0) {
-        qDebug("Error killing %d\n", pppdPid);
+        odebug << "Error killing " << pppdPid << "\n" << oendl; 
         return false;
       }
     }
   }
   return true;
 }
 
 
 void Modem::parseargs(char* buf, char** args) {
   int nargs = 0;
   int quotes;
 
@@ -1026,46 +1026,46 @@ void Modem::killPPPDaemon()
   killpppd();
 }
 
 int Modem::pppdExitStatus()
 {
     return _pppdExitStatus;
 }
 
 int Modem::openResolv(int flags)
 {
     int fd;
     if ((fd = open(_PATH_RESCONF, flags)) == -1) {
-        qDebug("error opening resolv.conf!");
+        odebug << "error opening resolv.conf!" << oendl; 
         fd = open(DEVNULL, O_RDONLY);
     }
     return fd;
 }
 
 bool Modem::setHostname(const QString & name)
 {
     return sethostname(name, name.length()) == 0;
 }
 
 QString Modem::pppDevice()const {
     return m_pppdDev;
 }
 void Modem::setPPPDevice( const QString& dev ) {
     m_pppdDev = dev;
 }
 pid_t Modem::pppPID()const {
     return pppdPid;
 }
 void Modem::setPPPDPid( pid_t pid ) {
-    qDebug("Modem setting pid");
+    odebug << "Modem setting pid" << oendl; 
     _pppdExitStatus = -1;
     pppdPid = pid;
     modemfd = -1;
 }
 void Modem::slotModemDebug(int fd) {
     char buf[2049];
     int len;
 
     // read in pppd data look for Using interface
     // then read the interface
     // we limit to 10 device now 0-9
     if((len = ::read(fd, buf, 2048)) > 0) {