1 files changed, 22 insertions, 23 deletions

diff --git a/noncore/settings/networksettings/ppp/modem.cpp b/noncore/settings/networksettings/ppp/modem.cpp
index 5139482..002c8e7 100644
--- a/noncore/settings/networksettings/ppp/modem.cpp
+++ b/noncore/settings/networksettings/ppp/modem.cpp
@@ -53,25 +53,25 @@
 #define i18n QObject::tr
 #define qError qDebug
 //#include <kdebug.h>
 //#include <config.h>
 
 #define MY_ASSERT(x)  if (!(x)) { \
         qFatal( "ASSERT: \"%s\" in %s (%d)\n",#x,__FILE__,__LINE__); \
         exit(1); }
 
 
 static sigjmp_buf jmp_buffer;
 
-Modem *Modem::modem = 0;
+//Modem *Modem::modem = 0;
 
 
 const char* pppdPath() {
   // wasting a few bytes
   static char buffer[sizeof(PPPDSEARCHPATH)+sizeof(PPPDNAME)];
   static char *pppdPath = 0L;
   char *p;
 
   if(pppdPath == 0L) {
     const char *c = PPPDSEARCHPATH;
     while(*c != '\0') {
       while(*c == ':')
@@ -82,49 +82,48 @@ const char* pppdPath() {
       *p = '\0';
       strcat(p, "/");
       strcat(p, PPPDNAME);
       if(access(buffer, F_OK) == 0)
         return (pppdPath = buffer);
     }
   }
 
   return pppdPath;
 }
 
 
-Modem::Modem()
+Modem::Modem( PPPData* pd )
 {
-    if (Modem::modem != 0) return; //CORRECT?
+    _pppdata = pd;
     modemfd = -1;
     _pppdExitStatus = -1;
     pppdPid = -1;
     sn = 0L;
     data_mode = false;
     modem_is_locked = false;
     lockfile[0] = '\0';
     device = "/dev/modem";
-    modem = this;
 }
 
 
-Modem::~Modem() {
-  modem = 0;
+Modem::~Modem()
+{
 }
 
 
 speed_t Modem::modemspeed() {
   // convert the string modem speed int the gpppdata object to a t_speed type
   // to set the modem.  The constants here should all be ifdef'd because
   // other systems may not have them
-    int i = PPPData::data()->speed().toInt()/100;
+    int i = _pppdata->speed().toInt()/100;
 
   switch(i) {
   case 24:
     return B2400;
     break;
   case 96:
     return B9600;
     break;
   case 192:
     return B19200;
     break;
   case 384:
@@ -156,35 +155,35 @@ speed_t Modem::modemspeed() {
 
   default:
     return B38400;
     break;
   }
 }
 
 bool Modem::opentty() {
   //  int flags;
 
 //begin  if((modemfd = Requester::rq->openModem(gpppdata.modemDevice()))<0) {
     close(modemfd);
-    device = PPPData::data()->modemDevice();
+    device = _pppdata->modemDevice();
     if ((modemfd = open(device, O_RDWR|O_NDELAY|O_NOCTTY)) == -1) {
         qDebug("error opening modem device !");
         errmsg = i18n("Unable to open modem.");
         return false;
     }
 //bend  if((modemfd = Requester::rq->openModem(gpppdata.modemDevice()))<0) {
 //}
 
 #if 0
-  if(PPPData::data()->UseCDLine()) {
+  if(_pppdata->UseCDLine()) {
     if(ioctl(modemfd, TIOCMGET, &flags) == -1) {
       errmsg = i18n("Unable to detect state of CD line.");
       ::close(modemfd);
       modemfd = -1;
       return false;
     }
     if ((flags&TIOCM_CD) == 0) {
       errmsg = i18n("The modem is not ready.");
       ::close(modemfd);
       modemfd = -1;
       return false;
     }
@@ -214,26 +213,26 @@ bool Modem::opentty() {
   tty.c_cc[VTIME] = 0;
   tty.c_oflag = 0;
   tty.c_lflag = 0;
 
   tty.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
   tty.c_cflag |= CS8 | CREAD;
   tty.c_cflag |= CLOCAL;                   // ignore modem status lines
   tty.c_iflag = IGNBRK | IGNPAR /* | ISTRIP */ ;
   tty.c_lflag &= ~ICANON;                  // non-canonical mode
   tty.c_lflag &= ~(ECHO|ECHOE|ECHOK|ECHOKE);
 
 
-  if(PPPData::data()->flowcontrol() != "None") {
-      if(PPPData::data()->flowcontrol() == "CRTSCTS") {
+  if(_pppdata->flowcontrol() != "None") {
+      if(_pppdata->flowcontrol() == "CRTSCTS") {
       tty.c_cflag |= CRTSCTS;
     }
     else {
       tty.c_iflag |= IXON | IXOFF;
       tty.c_cc[VSTOP]  = 0x13; /* DC3 = XOFF = ^S */
       tty.c_cc[VSTART] = 0x11; /* DC1 = XON  = ^Q */
     }
   }
   else {
     tty.c_cflag &= ~CRTSCTS;
     tty.c_iflag &= ~(IXON | IXOFF);
   }
@@ -344,25 +343,25 @@ bool Modem::writeChar(unsigned char c) {
     }
   } while(s == 0);
 
   return true;
 }
 
 
 bool Modem::writeLine(const char *buf) {
   int len = strlen(buf);
   char *b = new char[len+2];
   memcpy(b, buf, len);
   // different modems seem to need different line terminations
-  QString term = PPPData::data()->enter();
+  QString term = _pppdata->enter();
   if(term == "LF")
     b[len++]='\n';
   else if(term == "CR")
     b[len++]='\r';
   else if(term == "CR/LF") {
     b[len++]='\r';
     b[len++]='\n';
   }
   int l = len;
   while(l) {
     int wr = write(modemfd, &b[len-l], l);
     if(wr < 0) {
@@ -384,27 +383,27 @@ bool Modem::hangup() {
   // this is probably the most imporant snippet of code in the whole of
   // kppp. If people complain about kppp being stuck, this piece of code
   // is most likely the reason.
   struct termios temptty;
 
   if(modemfd >= 0) {
 
     // is this Escape & HangupStr stuff really necessary ? (Harri)
 
     if (data_mode) escape_to_command_mode();
 
     // Then hangup command
-    writeLine(PPPData::data()->modemHangupStr().local8Bit());
+    writeLine(_pppdata->modemHangupStr().local8Bit());
 
-    usleep(PPPData::data()->modemInitDelay() * 10000); // 0.01 - 3.0 sec
+    usleep(_pppdata->modemInitDelay() * 10000); // 0.01 - 3.0 sec
 
 #ifndef DEBUG_WO_DIALING
     if (sigsetjmp(jmp_buffer, 1) == 0) {
       // set alarm in case tcsendbreak() hangs
       signal(SIGALRM, alarm_handler);
       alarm(2);
 
       tcsendbreak(modemfd, 0);
 
       alarm(0);
       signal(SIGALRM, SIG_IGN);
     } else {
@@ -422,52 +421,52 @@ bool Modem::hangup() {
     cfsetispeed(&temptty, B0);
     tcsetattr(modemfd, TCSAFLUSH, &temptty);
 #else
     int modemstat;
     ioctl(modemfd, TIOCMGET, &modemstat);
     modemstat &= ~TIOCM_DTR;
     ioctl(modemfd, TIOCMSET, &modemstat);
     ioctl(modemfd, TIOCMGET, &modemstat);
     modemstat |= TIOCM_DTR;
     ioctl(modemfd, TIOCMSET, &modemstat);
 #endif
 
-    usleep(PPPData::data()->modemInitDelay() * 10000); // 0.01 - 3.0 secs
+    usleep(_pppdata->modemInitDelay() * 10000); // 0.01 - 3.0 secs
 
     cfsetospeed(&temptty, modemspeed());
     cfsetispeed(&temptty, modemspeed());
     tcsetattr(modemfd, TCSAFLUSH, &temptty);
 #endif
     return true;
   } else
     return false;
 }
 
 
 void Modem::escape_to_command_mode() {
   // Send Properly bracketed escape code to put the modem back into command state.
   // A modem will accept AT commands only when it is in command state.
   // When a modem sends the host the CONNECT string, that signals
   // that the modem is now in the connect state (no long accepts AT commands.)
   // Need to send properly timed escape sequence to put modem in command state.
   // Escape codes and guard times are controlled by S2 and S12 values.
   //
   tcflush(modemfd, TCIOFLUSH);
 
   // +3 because quiet time must be greater than guard time.
-  usleep((PPPData::data()->modemEscapeGuardTime()+3)*20000);
-  QCString tmp = PPPData::data()->modemEscapeStr().local8Bit();
+  usleep((_pppdata->modemEscapeGuardTime()+3)*20000);
+  QCString tmp = _pppdata->modemEscapeStr().local8Bit();
   write(modemfd, tmp.data(), tmp.length());
   tcflush(modemfd, TCIOFLUSH);
-  usleep((PPPData::data()->modemEscapeGuardTime()+3)*20000);
+  usleep((_pppdata->modemEscapeGuardTime()+3)*20000);
 
   data_mode = false;
 }
 
 
 const QString Modem::modemMessage() {
   return errmsg;
 }
 
 
 QString Modem::parseModemSpeed(const QString &s) {
   // this is a small (and bad) parser for modem speeds
@@ -565,34 +564,34 @@ QString Modem::parseModemSpeed(const QString &s) {
   qDebug( "The parsed result is: %s", result.latin1());
 
   return result;
 }
 
 
 // Lock modem device. Returns 0 on success 1 if the modem is locked and -1 if
 // a lock file can't be created ( permission problem )
 int Modem::lockdevice() {
   int fd;
   char newlock[80]=""; // safe
 
-  if(!PPPData::data()->modemLockFile()) {
+  if(!_pppdata->modemLockFile()) {
     qDebug("The user doesn't want a lockfile.");
     return 0;
   }
 
   if (modem_is_locked)
     return 1;
 
   QString lockfile = LOCK_DIR"/LCK..";
-  lockfile += PPPData::data()->modemDevice().mid(5); // append everything after /dev/
+  lockfile += _pppdata->modemDevice().mid(5); // append everything after /dev/
 
   if(access(QFile::encodeName(lockfile), F_OK) == 0) {
 //    if ((fd = Requester::rq->
 if ((fd = openLockfile(QFile::encodeName(lockfile), O_RDONLY)) >= 0) {
       // Mario: it's not necessary to read more than lets say 32 bytes. If
       // file has more than 32 bytes, skip the rest
       char oldlock[33]; // safe
       int sz = read(fd, &oldlock, 32);
       close (fd);
       if (sz <= 0)
         return 1;
       oldlock[sz] = '\0';
@@ -605,25 +604,25 @@ if ((fd = openLockfile(QFile::encodeName(lockfile), O_RDONLY)) >= 0) {
       // found a pid in lockfile ?
       if (match < 1 || oldpid <= 0)
         return 1;
 
       // check if process exists
       if (kill((pid_t)oldpid, 0) == 0 || errno != ESRCH)
         return 1;
 
       qDebug( "lockfile is stale" );
     }
   }
 
-  fd = openLockfile(PPPData::data()->modemDevice(),O_WRONLY|O_TRUNC|O_CREAT);
+  fd = openLockfile(_pppdata->modemDevice(),O_WRONLY|O_TRUNC|O_CREAT);
   if(fd >= 0) {
     sprintf(newlock,"%010d\n", getpid());
     qDebug("Locking Device: %s", newlock);
 
     write(fd, newlock, strlen(newlock));
     close(fd);
     modem_is_locked=true;
 
     return 0;
   }
 
   return -1;
@@ -979,33 +978,33 @@ void Modem::parseargs(char* buf, char** args) {
       while ((*buf != '\0') && (*buf != quotes))
 	buf++;
       *buf++ = '\0';
     }
   }
 
   *args = 0L;
 }
 
 bool Modem::execPPPDaemon(const QString & arguments)
 {
   if(execpppd(arguments)==0) {
-    PPPData::data()->setpppdRunning(true);
+    _pppdata->setpppdRunning(true);
     return true;
   } else
     return false;
 }
 
 void Modem::killPPPDaemon()
 {
-  PPPData::data()->setpppdRunning(false);
+  _pppdata->setpppdRunning(false);
   killpppd();
 }
 
 int Modem::pppdExitStatus()
 {
     return _pppdExitStatus;
 }
 
 int Modem::openResolv(int flags)
 {
     int fd;
     if ((fd = open(_PATH_RESCONF, flags)) == -1) {