1 files changed, 388 insertions, 0 deletions

diff --git a/rsync/rsync.h b/rsync/rsync.h
new file mode 100644
index 0000000..a80a368
--- a/dev/null
+++ b/rsync/rsync.h
@@ -0,0 +1,388 @@
+/*=                    -*- c-basic-offset: 4; indent-tabs-mode: nil; -*-
+ *
+ * librsync -- library for network deltas
+ * $Id$
+ * 
+ * Copyright (C) 2000, 2001 by Martin Pool <mbp@samba.org>
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+                              /*
+                               | You should never wear your best
+                               | trousers when you go out to fight for
+                               | freedom and liberty.
+                               |        -- Henrik Ibsen
+                               */
+
+
+/** \file rsync.h
+ *
+ * \brief Main public interface to librsync.
+ * \author Martin Pool <mbp@samba.org>
+ * \version librsync-0.9.1
+ *
+ * $Id$
+ *
+ * See \ref intro for an introduction to use of this library.
+ */
+
+#include <sys/types.h>
+
+extern char const rs_librsync_version[];
+extern char const rs_licence_string[];
+
+
+/**
+ * \brief A long integer type that can handle the largest file
+ * offsets.
+ *
+ * Perhaps this might have to be configured to be 'long long', 'long',
+ * or something else depending on the platform.
+ */
+#if SIZEOF_LONG_LONG
+typedef signed long long    rs_long_t;
+#else
+typedef long rs_long_t;
+#endif
+
+
+/**
+ * \brief Log severity levels.
+ *
+ * These are the same as syslog, at least in glibc.
+ *
+ * \sa rs_trace_set_level()
+ */
+typedef enum {
+    RS_LOG_EMERG         = 0,   /**< System is unusable */
+    RS_LOG_ALERT         = 1,   /**< Action must be taken immediately */
+    RS_LOG_CRIT          = 2,   /**< Critical conditions */
+    RS_LOG_ERR           = 3,   /**< Error conditions */
+    RS_LOG_WARNING       = 4,   /**< Warning conditions */
+    RS_LOG_NOTICE        = 5,   /**< Normal but significant condition */
+    RS_LOG_INFO          = 6,   /**< Informational */
+    RS_LOG_DEBUG         = 7    /**< Debug-level messages */
+} rs_loglevel;
+
+
+
+/**
+ * \typedef rs_trace_fn_t
+ * \brief Callback to write out log messages.
+ * \param level a syslog level.
+ * \param msg message to be logged.
+ */
+typedef void    rs_trace_fn_t(int level, char const *msg);
+
+void            rs_trace_set_level(rs_loglevel level);
+
+/** Set trace callback. */
+void            rs_trace_to(rs_trace_fn_t *);
+
+/** Default trace callback that writes to stderr.  Implements
+ * ::rs_trace_fn_t, and may be passed to rs_trace_to(). */
+void            rs_trace_stderr(int level, char const *msg);
+
+/** Check whether the library was compiled with debugging trace
+ * suport. */
+int             rs_supports_trace(void);
+
+
+
+/**
+ * Convert FROM_LEN bytes at FROM_BUF into a hex representation in
+ * TO_BUF, which must be twice as long plus one byte for the null
+ * terminator.
+ */
+void     rs_hexify(char *to_buf, void const *from_buf, int from_len);
+
+/**
+ * Decode a base64 buffer in place.  \return the number of binary
+ * bytes.
+ */
+size_t rs_unbase64(char *s);
+
+
+/**
+ * Encode a buffer as base64.
+ */
+void rs_base64(unsigned char const *buf, int n, char *out);
+
+
+/**
+ * \brief Return codes from nonblocking rsync operations.
+ */
+typedef enum {
+            RS_DONE =           0,/**< Completed successfully. */
+            RS_BLOCKED =        1, /**< Blocked waiting for more data. */
+    RS_RUNNING  =       2,      /**< Not yet finished or blocked.
+                                 * This value should never be returned
+                                 * to the caller.  */
+    
+    RS_TEST_SKIPPED =   77,     /**< Test neither passed or failed. */
+    
+            RS_IO_ERROR =100,    /**< Error in file or network IO. */
+    RS_SYNTAX_ERROR =   101,    /**< Command line syntax error. */
+            RS_MEM_ERROR =102,    /**< Out of memory. */
+            RS_INPUT_ENDED =    103,/**< End of input file, possibly
+                                   unexpected. */
+    RS_BAD_MAGIC =      104,    /**< Bad magic number at start of
+                                   stream.  Probably not a librsync
+                                   file, or possibly the wrong kind of
+                                   file or from an incompatible
+                                   library version. */
+    RS_UNIMPLEMENTED =  105,    /**< Author is lazy. */
+    RS_CORRUPT =        106,    /**< Unbelievable value in stream. */
+    RS_INTERNAL_ERROR = 107,    /**< Probably a library bug. */
+    RS_PARAM_ERROR =    108     /**< Bad value passed in to library,
+                                 * probably an application bug. */
+} rs_result;
+
+
+
+/**
+ * Return an English description of a ::rs_result value.
+ */
+char const *rs_strerror(rs_result r);
+
+
+/**
+ * \brief Performance statistics from a librsync encoding or decoding
+ * operation.
+ *
+ * \sa rs_format_stats(), rs_log_stats()
+ */
+typedef struct rs_stats {
+    char const     *op;     /**< Human-readable name of current
+                             * operation.  For example, "delta". */
+    int             lit_cmds;   /**< Number of literal commands. */
+    rs_long_t       lit_bytes;  /**< Number of literal bytes. */
+    rs_long_t       lit_cmdbytes; /**< Number of bytes used in literal
+                                   * command headers. */
+        
+    rs_long_t       copy_cmds, copy_bytes, copy_cmdbytes;
+    rs_long_t       sig_cmds, sig_bytes;
+    int             false_matches;
+
+    rs_long_t       sig_blocks; /**< Number of blocks described by the
+                                   signature. */
+
+    size_t          block_len;
+
+    rs_long_t       in_bytes;   /**< Total bytes read from input. */
+    rs_long_t       out_bytes;  /**< Total bytes written to output. */
+} rs_stats_t;
+
+
+/** \typedef struct rs_mdfour rs_mdfour_t
+ *
+ * \brief MD4 message-digest accumulator.
+ *
+ * \sa rs_mdfour(), rs_mdfour_begin(), rs_mdfour_update(),
+ * rs_mdfour_result()
+ */
+typedef struct rs_mdfour {
+    int                 A, B, C, D;
+    int                 totalN;
+    int                 tail_len;
+    unsigned char       tail[64];
+} rs_mdfour_t;
+
+#define RS_MD4_LENGTH 16
+
+typedef unsigned int rs_weak_sum_t;
+typedef unsigned char rs_strong_sum_t[RS_MD4_LENGTH];
+
+void            rs_mdfour(unsigned char *out, void const *in, size_t); 
+void            rs_mdfour_begin(/* @out@ */ rs_mdfour_t * md);
+void            rs_mdfour_update(rs_mdfour_t * md, void const *,
+                                 size_t n);
+void rs_mdfour_result(rs_mdfour_t * md, unsigned char *out);
+
+char *rs_format_stats(rs_stats_t const *, char *, size_t);
+
+int rs_log_stats(rs_stats_t const *stats);
+
+
+typedef struct rs_signature rs_signature_t;
+
+void rs_free_sumset(rs_signature_t *);
+void rs_sumset_dump(rs_signature_t const *);
+
+
+/**
+ * Stream through which the calling application feeds data to and from the
+ * library.
+ *
+ * On each call to rs_job_iter, the caller can make available
+ *
+ *  - avail_in bytes of input data at next_in
+ *  - avail_out bytes of output space at next_out
+ *  - some of both
+ *
+ * Buffers must be allocated and passed in by the caller.  This
+ * routine never allocates, reallocates or frees buffers.
+ *
+ * Pay attention to the meaning of the returned pointer and length
+ * values.  They do \b not indicate the location and amount of
+ * returned data.  Rather, if \p *out_ptr was originally set to \p
+ * out_buf, then the output data begins at \p out_buf, and has length
+ * \p *out_ptr - \p out_buf.
+ *
+ * Note also that if \p *avail_in is nonzero on return, then not all of
+ * the input data has been consumed.  The caller should either provide
+ * more output buffer space and call rs_work() again passing the same
+ * \p next_in and \p avail_in, or put the remaining input data into some
+ * persistent buffer and call rs_work() with it again when there is
+ * more output space.
+ *
+ * \param next_in References a pointer which on entry should point to
+ * the start of the data to be encoded.  Updated to point to the byte
+ * after the last one consumed.
+ *
+ * \param avail_in References the length of available input.  Updated to
+ * be the number of unused data bytes, which will be zero if all the
+ * input was consumed.  May be zero if there is no new input, but the
+ * caller just wants to drain output.
+ *
+ * \param next_out References a pointer which on entry points to the
+ * start of the output buffer.  Updated to point to the byte after the
+ * last one filled.
+ *
+ * \param avail_out References the size of available output buffer.
+ * Updated to the size of unused output buffer.
+ *
+ * \return The ::rs_result that caused iteration to stop.
+ *
+ * \sa rs_buffers_t
+ * \sa \ref api_buffers
+ */
+struct rs_buffers_s {
+            char *next_in;      /**< Next input byte */
+    size_t avail_in;            /**< Number of bytes available at next_in */
+    int eof_in;                 /**< True if there is no more data
+                                 * after this.  */
+
+            char *next_out;     /**< Next output byte should be put there */
+    size_t avail_out;           /**< Remaining free space at next_out */
+};
+
+/**
+ * Stream through which the calling application feeds data to and from the
+ * library.
+ *
+ * \sa struct rs_buffers_s
+ * \sa \ref api_buffers
+ */
+typedef struct rs_buffers_s rs_buffers_t;
+
+/** Default length of strong signatures, in bytes.  The MD4 checksum
+ * is truncated to this size. */
+#define RS_DEFAULT_STRONG_LEN 8
+
+/** Default block length, if not determined by any other factors. */
+#define RS_DEFAULT_BLOCK_LEN 2048
+
+
+/** \typedef struct rs_job rs_job_t
+ *
+ * \brief Job of work to be done.
+ *
+ * Created by functions such as rs_sig_begin(), and then iterated
+ * over by rs_job_iter(). */
+typedef struct rs_job rs_job_t;
+
+/**
+ * Bitmask values that may be passed to the options parameter of
+ * rs_work().
+ */
+typedef enum rs_work_options {
+    RS_END = 0x01               /**< End of input file; please finish
+                                 * up. */
+} rs_work_options;
+
+
+rs_result       rs_job_iter(rs_job_t *, rs_buffers_t *);
+
+typedef rs_result rs_driven_cb(rs_job_t *job, rs_buffers_t *buf,
+                               void *opaque);
+
+rs_result rs_job_drive(rs_job_t *job, rs_buffers_t *buf,
+                       rs_driven_cb in_cb, void *in_opaque,
+                       rs_driven_cb out_cb, void *out_opaque);
+
+rs_result       rs_job_free(rs_job_t *);
+
+int             rs_accum_value(rs_job_t *, char *sum, size_t sum_len);
+
+rs_job_t *rs_sig_begin(size_t new_block_len, size_t strong_sum_len);
+
+rs_job_t *rs_delta_begin(rs_signature_t *);
+
+rs_job_t *rs_loadsig_begin(rs_signature_t **);
+
+/**
+ * \brief Callback used to retrieve parts of the basis file.
+ *
+ * \param pos Position where copying should begin.
+ *
+ * \param len On input, the amount of data that should be retrieved.
+ * Updated to show how much is actually available.
+ *
+ * \param buf On input, a buffer of at least \p *len bytes.  May be
+ * updated to point to a buffer allocated by the callback if it
+ * prefers.
+ */
+typedef rs_result rs_copy_cb(void *opaque, off_t pos,
+                             size_t *len, void **buf);
+
+
+
+rs_job_t *rs_patch_begin(rs_copy_cb *, void *copy_arg);
+
+
+rs_result rs_build_hash_table(rs_signature_t* sums);
+
+
+
+#ifndef RSYNC_NO_STDIO_INTERFACE
+/**
+ * Buffer sizes for file IO.
+ *
+ * You probably only need to change these in testing.
+ */
+extern int rs_inbuflen, rs_outbuflen;
+
+
+/**
+ * Calculate the MD4 sum of a file.
+ *
+ * \param result Binary (not hex) MD4 of the whole contents of the
+ * file.
+ */
+void rs_mdfour_file(FILE *in_file, char *result);
+
+rs_result rs_sig_file(FILE *old_file, FILE *sig_file,
+                      size_t block_len, size_t strong_len, rs_stats_t *); 
+
+rs_result rs_loadsig_file(FILE *, rs_signature_t **, rs_stats_t *);
+
+rs_result rs_file_copy_cb(void *arg, off_t pos, size_t *len, void **buf);
+
+rs_result rs_delta_file(rs_signature_t *, FILE *new_file, FILE *delta_file, rs_stats_t *);
+
+rs_result rs_patch_file(FILE *basis_file, FILE *delta_file, FILE *new_file, rs_stats_t *);
+#endif