From e3134c9b363c7397e237f7c90b326f4dbf8126c5 Mon Sep 17 00:00:00 2001 From: groucho Date: Fri, 24 Sep 2004 16:48:00 +0000 Subject: Added manually created files not taken care of by the Makefile --- (limited to 'i18n') diff --git a/i18n/cz/camera.ts b/i18n/cz/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/cz/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/cz/libcamera.ts b/i18n/cz/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/cz/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/cz/libwellenreiter.ts b/i18n/cz/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/cz/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/cz/libwlan.ts b/i18n/cz/libwlan.ts index cbfddc8..e44b579 100644 --- a/i18n/cz/libwlan.ts +++ b/i18n/cz/libwlan.ts @@ -1,293 +1,241 @@ AWLan - - <UseHostName> - - WLAN Wireless Configuration - Bezdrátová konfigurace + Bezdrátová konfigurace General - Hlavní + Hlavní any - jakýkoliv + jakýkoliv SSID - SSID + SSID Infrastructure - Infrastruktura + Infrastruktura Auto - Auto + Auto Managed - Řízeno + Řízeno Ad-Hoc - Ad-Hoc + Ad-Hoc Mode - Režim + Režim Specify &Access Point - Určete &Access Point + Určete &Access Point MAC - MAC + MAC Specify &Channel - Určete &kanál + Určete &kanál Rescan Neighbourhood - Proskenovat okolí + Proskenovat okolí Chn - Kanál + Kanál Encryption - Šifrování + Šifrování &Enable Encryption - &Zapnout šifrování + &Zapnout šifrování &Key Setting - Nastavení &klíčů + Nastavení &klíčů Key &1 - Klíč &1 + Klíč &1 Key &2 - Klíč &2 + Klíč &2 Key &3 - Klíč &3 + Klíč &3 Key &4 - Klíč &4 + Klíč &4 Non-encrypted Packets - Nezašifrované pakety + Nezašifrované pakety &Accept - &Akceptovat + &Akceptovat &Reject - &Odmítnout + &Odmítnout WLanGUI - Form1 - - - General - Hlavní + Hlavní Auto - Auto + Auto Managed - Řízeno + Řízeno Ad-Hoc - Ad-Hoc - - - Name - + Ad-Hoc Mode - Režim - - - ESS-ID - - - - <UseHostName> - - - - Specify Access Point - + Režim MAC - MAC + MAC Encryption - Šifrování + Šifrování &Enable Encryption - &Zapnout šifrování + &Zapnout šifrování &Key Setting - Nastavení &klíčů + Nastavení &klíčů Key &1 - Klíč &1 + Klíč &1 Key &4 - Klíč &4 + Klíč &4 Key &2 - Klíč &2 + Klíč &2 Key &3 - Klíč &3 - - - Accept Non-Encrypted packets - - - - State - + Klíč &3 AP - AP + AP Rate - Rychlost + Rychlost Channel - Kanál + Kanál Station - Stanice + Stanice ESSID - ESSID - - - Frequency - - - - Link Quality - + ESSID Noise - Šum + Šum Quality - Kvalita + Kvalita Signal - Signál - - - Live feed - + Signál WLanNetNode - - WLan Device - - - - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> - - WlanInfo Interface Information - Informace o rozhraní + Informace o rozhraní 802.11b - 802.11b + 802.11b Channel - Kanál + Kanál Mode - Režim + Režim ESSID - ESSID + ESSID Station - Stanice + Stanice AP - AP + AP Rate - Rychlost + Rychlost Quality - Kvalita + Kvalita Noise - Šum + Šum Signal - Signál + Signál diff --git a/i18n/cz/wellenreiter.ts b/i18n/cz/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/cz/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/da/camera.ts b/i18n/da/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/da/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/da/libcamera.ts b/i18n/da/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/da/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/da/libwellenreiter.ts b/i18n/da/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/da/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/da/libwlan.ts b/i18n/da/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/da/libwlan.ts +++ b/i18n/da/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/da/wellenreiter.ts b/i18n/da/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/da/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/de/camera.ts b/i18n/de/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/de/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/de/libcamera.ts b/i18n/de/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/de/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/de/libwellenreiter.ts b/i18n/de/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/de/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/de/libwlan.ts b/i18n/de/libwlan.ts index 0558a4d..6f3c07a 100644 --- a/i18n/de/libwlan.ts +++ b/i18n/de/libwlan.ts @@ -2,24 +2,20 @@ iso8859-1 AWLan - - <UseHostName> - - WLAN Wireless Configuration - Wireless Configuration + Wireless Configuration General - Allgemein + Allgemein Mode - Modus + Modus ESS-ID @@ -27,272 +23,228 @@ MAC - MAC + MAC Specify &Access Point - &Accesspoint + &Accesspoint Specify &Channel - &Channel + &Channel any - alles + alles Infrastructure - Infrastruktur + Infrastruktur Auto - Auto + Auto Managed - Managed + Managed Ad-Hoc - Ad-Hoc + Ad-Hoc Encryption - Verschlüsselung + Verschlüsselung &Enable Encryption - &Verschlüsselung + &Verschlüsselung &Key Setting - &Schlüssel + &Schlüssel Key &1 - Schlüssel &1 + Schlüssel &1 Key &2 - Schlüssel &2 + Schlüssel &2 Key &3 - Schlüssel &3 + Schlüssel &3 Key &4 - Schlüssel &4 + Schlüssel &4 Non-encrypted Packets - Unverschlüsselte Pakete + Unverschlüsselte Pakete &Accept - &Akzeptieren + &Akzeptieren &Reject - &ZTurückweisen + &ZTurückweisen SSID - SSID + SSID Rescan Neighbourhood - Umgebung neu scannen + Umgebung neu scannen Chn - Chn + Chn WLanGUI - Form1 - - - General - Allgemein + Allgemein Auto - Auto + Auto Managed - Managed + Managed Ad-Hoc - Ad-Hoc - - - Name - + Ad-Hoc Mode - Modus + Modus ESS-ID - ESS-ID - - - <UseHostName> - - - - Specify Access Point - + ESS-ID MAC - MAC + MAC Encryption - Verschlüsselung + Verschlüsselung &Enable Encryption - &Verschlüsselung + &Verschlüsselung &Key Setting - &Schlüssel + &Schlüssel Key &1 - Schlüssel &1 + Schlüssel &1 Key &4 - Schlüssel &4 + Schlüssel &4 Key &2 - Schlüssel &2 + Schlüssel &2 Key &3 - Schlüssel &3 - - - Accept Non-Encrypted packets - - - - State - + Schlüssel &3 AP - AP + AP Rate - Rate + Rate Channel - 802.11b + 802.11b Station - Station + Station ESSID - ESSID - - - Frequency - - - - Link Quality - + ESSID Noise - Störung + Störung Quality - Qualität + Qualität Signal - Signal - - - Live feed - + Signal WLanNetNode - - WLan Device - - - - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> - - WlanInfo Interface Information - Schnittstelleninformation + Schnittstelleninformation 802.11b - 802.11b + 802.11b Channel - 802.11b + 802.11b Mode - Modus + Modus ESSID - ESSID + ESSID Station - Station + Station AP - AP + AP Rate - Rate + Rate Quality - Qualität + Qualität Noise - Störung + Störung Signal - Signal + Signal diff --git a/i18n/de/wellenreiter.ts b/i18n/de/wellenreiter.ts index 2145f0b..aa1dcf2 100644 --- a/i18n/de/wellenreiter.ts +++ b/i18n/de/wellenreiter.ts @@ -38,6 +38,14 @@ Last Seen Zuletzt gesehen + + IP + + + + Location + + MStatWindow @@ -51,6 +59,17 @@ + ProtocolListView + + Protocol Family + + + + Perform Action + + + + QObject Wellenreiter: trying to run as non-root! @@ -70,10 +89,21 @@ zur Verfügung stehen! Weitermachen? You have a dhcp client running. This can severly limit scanning! Should I kill it for you? - Es läuft ein DHCP Client. + Es läuft ein DHCP Client. Dies kann das Scannen empfindlich stören. Soll er abgeschaltet werden? + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + Wellenreiter @@ -86,7 +116,7 @@ wieder im Normalbetrieb. Your device is not properly configured. Please reconfigure! - Ihr Gerät ist nicht richtig + Ihr Gerät ist nicht richtig konfiguriert. Bitte rekonfigurieren! @@ -97,17 +127,77 @@ Monitormodus ein. Can't set device into monitor mode. - Kann nicht in Monitormodus schalten. + Kann nicht in Monitormodus schalten. Can't open packet capturer: - Kann Paketmonitor nicht öffnen: + Kann Paketmonitor nicht öffnen: Wellenreiter II - replaying capture file... Wellenreiter II - Spiele Capturefile ab... + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + WellenreiterBase @@ -127,7 +217,7 @@ Martin J. Muench<br> Michael Lauer<br><hr> <b>www.remote-exploit.org</b> </p> - <p align=center> + <p align=center> <hr> Max Moser<br> Martin J. Muench<br> @@ -168,11 +258,11 @@ Michael Lauer<br><hr> WellenreiterConfigBase Form1 - Formular1 + Formular1 Sniffer - Schnüffler + Schnüffler Choose the interface used for sniffing. @@ -220,19 +310,19 @@ Michael Lauer<br><hr> Hop Interval - Wechselintervall + Wechselintervall Device Type - Gerätetyp + Gerätetyp Interface Name - Gerätename + Gerätename Fake MAC: - MAC-Adresse fälschen: + MAC-Adresse fälschen: 44:44:44:44:44:44 @@ -240,47 +330,387 @@ Michael Lauer<br><hr> Active Scanning (caution!) - Aktives Scannen (Vorsicht!) + Aktives Scannen (Vorsicht!) sound on new net - Klang bei neuem Netz + Klang bei neuem Netz Ignore - Ignorieren + Ignorieren Touch - Erneuern + Erneuern Key - Schlüssel + Schlüssel Alarm - Alarm + Alarm sound on beacon - Klang bei Beacon + Klang bei Beacon Write Capture File - Capture-Datei schreiben + Capture-Datei schreiben ... - ... + ... GUI - GUI + GUI CaptureFile: - Capture-Datei: + Capture-Datei: + + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + Driver: + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + Alle + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + @@ -368,5 +798,86 @@ Please stop sniffing before closing. Unterbrechen Sie den Monitormodus vor dem Schließen. + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Upload Session + + + + &Expand All + + + + &Collapse All + + + + GPS said: +%1 + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + diff --git a/i18n/dk/camera.ts b/i18n/dk/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/dk/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/dk/libcamera.ts b/i18n/dk/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/dk/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/dk/libwellenreiter.ts b/i18n/dk/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/dk/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/dk/libwlan.ts b/i18n/dk/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/dk/libwlan.ts +++ b/i18n/dk/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/dk/wellenreiter.ts b/i18n/dk/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/dk/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/en/camera.ts b/i18n/en/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/en/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/en/libcamera.ts b/i18n/en/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/en/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/en/libwellenreiter.ts b/i18n/en/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/en/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/en/libwlan.ts b/i18n/en/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/en/libwlan.ts +++ b/i18n/en/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/en/wellenreiter.ts b/i18n/en/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/en/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/es/camera.ts b/i18n/es/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/es/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/es/libcamera.ts b/i18n/es/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/es/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/es/libwellenreiter.ts b/i18n/es/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/es/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/es/libwlan.ts b/i18n/es/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/es/libwlan.ts +++ b/i18n/es/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/es/wellenreiter.ts b/i18n/es/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/es/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/fr/camera.ts b/i18n/fr/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/fr/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/fr/libcamera.ts b/i18n/fr/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/fr/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/fr/libwellenreiter.ts b/i18n/fr/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/fr/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/fr/libwlan.ts b/i18n/fr/libwlan.ts index 908d3e3..c60b7a5 100644 --- a/i18n/fr/libwlan.ts +++ b/i18n/fr/libwlan.ts @@ -1,24 +1,20 @@ AWLan - - <UseHostName> - - WLAN Wireless Configuration - Conf. liaison sans Fil + Conf. liaison sans Fil General - Général + Général Mode - Mode + Mode ESS-ID @@ -26,272 +22,228 @@ MAC - MAC + MAC Specify &Access Point - Spécifier point d'&accès + Spécifier point d'&accès Specify &Channel - Spécifier &canal + Spécifier &canal any - any + any Infrastructure - Infrastructure + Infrastructure Auto - Auto + Auto Managed - Managed + Managed Ad-Hoc - Ad-Hoc + Ad-Hoc Encryption - Sécurité + Sécurité &Enable Encryption - &Activer le cryptage + &Activer le cryptage &Key Setting - Configurer &clé + Configurer &clé Key &1 - Clé &1 + Clé &1 Key &2 - Clé &2 + Clé &2 Key &3 - Clé &3 + Clé &3 Key &4 - Clé &4 + Clé &4 Non-encrypted Packets - Paquets non-cryptés + Paquets non-cryptés &Accept - &Accepter + &Accepter &Reject - &Rejeter + &Rejeter SSID - SSID + SSID Rescan Neighbourhood - Rescanner + Rescanner Chn - Canal + Canal WLanGUI - Form1 - - - General - Général + Général Auto - Auto + Auto Managed - Managed + Managed Ad-Hoc - Ad-Hoc - - - Name - + Ad-Hoc Mode - Mode + Mode ESS-ID - ESS-ID - - - <UseHostName> - - - - Specify Access Point - + ESS-ID MAC - MAC + MAC Encryption - Sécurité + Sécurité &Enable Encryption - &Activer le cryptage + &Activer le cryptage &Key Setting - Configurer &clé + Configurer &clé Key &1 - Clé &1 + Clé &1 Key &4 - Clé &4 + Clé &4 Key &2 - Clé &2 + Clé &2 Key &3 - Clé &3 - - - Accept Non-Encrypted packets - - - - State - + Clé &3 AP - AP + AP Rate - Vitesse + Vitesse Channel - Canal + Canal Station - Station + Station ESSID - ESSID - - - Frequency - - - - Link Quality - + ESSID Noise - Bruit + Bruit Quality - Qualité + Qualité Signal - Signal - - - Live feed - + Signal WLanNetNode - - WLan Device - - - - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> - - WlanInfo Interface Information - Information interface + Information interface 802.11b - 802.11b + 802.11b Channel - Canal + Canal Mode - Mode + Mode ESSID - ESSID + ESSID Station - Station + Station AP - AP + AP Rate - Vitesse + Vitesse Quality - Qualité + Qualité Noise - Bruit + Bruit Signal - Signal + Signal diff --git a/i18n/fr/wellenreiter.ts b/i18n/fr/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/fr/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/hu/camera.ts b/i18n/hu/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/hu/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/hu/libcamera.ts b/i18n/hu/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/hu/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/hu/libwellenreiter.ts b/i18n/hu/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/hu/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/hu/libwlan.ts b/i18n/hu/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/hu/libwlan.ts +++ b/i18n/hu/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/hu/wellenreiter.ts b/i18n/hu/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/hu/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/it/camera.ts b/i18n/it/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/it/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/it/libcamera.ts b/i18n/it/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/it/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/it/libwellenreiter.ts b/i18n/it/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/it/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/it/libwlan.ts b/i18n/it/libwlan.ts index 7624024..0e3ae7b 100644 --- a/i18n/it/libwlan.ts +++ b/i18n/it/libwlan.ts @@ -2,24 +2,20 @@ iso8859-1 AWLan - - <UseHostName> - - WLAN Wireless Configuration - Configurazione Wireless + Configurazione Wireless General - Generale + Generale Mode - Modalità + Modalità ESS-ID @@ -27,260 +23,228 @@ MAC - MAC + MAC Specify &Access Point - Specifica &Access Point + Specifica &Access Point Specify &Channel - Specifica &Canale + Specifica &Canale any - tutti + tutti Infrastructure - Infrastruttura + Infrastruttura Auto - Auto + Auto Managed - Gestista + Gestista Ad-Hoc - Ad-Hoc + Ad-Hoc Encryption - Crittografia + Crittografia &Enable Encryption - &Abilita Crittografia + &Abilita Crittografia &Key Setting - &Impostazioni Chiave + &Impostazioni Chiave Key &1 - Chiave &1 + Chiave &1 Key &2 - Chiave &2 + Chiave &2 Key &3 - Chiave &3 + Chiave &3 Key &4 - Chiave &4 + Chiave &4 Non-encrypted Packets - Pacchetti non criptati + Pacchetti non criptati &Accept - &Accetta + &Accetta &Reject - &Rifiuta + &Rifiuta + + + SSID + - - - WLanGUI - Form1 + Rescan Neighbourhood + Chn + + + + + WLanGUI + General - Generale + Generale Auto - Auto + Auto Managed - Gestista + Gestista Ad-Hoc - Ad-Hoc - - - Name - + Ad-Hoc Mode - Modalità + Modalità ESS-ID - ESS-ID - - - <UseHostName> - - - - Specify Access Point - + ESS-ID MAC - MAC + MAC Encryption - Crittografia + Crittografia &Enable Encryption - &Abilita Crittografia + &Abilita Crittografia &Key Setting - &Impostazioni Chiave + &Impostazioni Chiave Key &1 - Chiave &1 + Chiave &1 Key &4 - Chiave &4 + Chiave &4 Key &2 - Chiave &2 + Chiave &2 Key &3 - Chiave &3 - - - Accept Non-Encrypted packets - - - - State - + Chiave &3 AP - AP + AP Rate - Frequenza + Frequenza Channel - Canale + Canale Station - Stazione + Stazione ESSID - ESSID - - - Frequency - - - - Link Quality - + ESSID Noise - Rumore + Rumore Quality - Qualità + Qualità Signal - Segnale - - - Live feed - + Segnale WLanNetNode - - WLan Device - - - - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> - - WlanInfo Interface Information - Informazioni Interfaccia + Informazioni Interfaccia 802.11b - 802.11b + 802.11b Channel - Canale + Canale Mode - Modalità + Modalità ESSID - ESSID + ESSID Station - Stazione + Stazione AP - AP + AP Rate - Frequenza + Frequenza Quality - Qualità + Qualità Noise - Rumore + Rumore Signal - Segnale + Segnale diff --git a/i18n/it/wellenreiter.ts b/i18n/it/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/it/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/ja/camera.ts b/i18n/ja/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/ja/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/ja/libcamera.ts b/i18n/ja/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/ja/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/ja/libwellenreiter.ts b/i18n/ja/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/ja/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/ja/libwlan.ts b/i18n/ja/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/ja/libwlan.ts +++ b/i18n/ja/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/ja/wellenreiter.ts b/i18n/ja/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/ja/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/ko/camera.ts b/i18n/ko/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/ko/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/ko/libcamera.ts b/i18n/ko/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/ko/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/ko/libwellenreiter.ts b/i18n/ko/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/ko/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/ko/libwlan.ts b/i18n/ko/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/ko/libwlan.ts +++ b/i18n/ko/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/ko/wellenreiter.ts b/i18n/ko/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/ko/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/lv/camera.ts b/i18n/lv/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/lv/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/lv/libcamera.ts b/i18n/lv/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/lv/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/lv/libkppp.ts b/i18n/lv/libkppp.ts index 2bf0fcd..ea4fc5b 100644 --- a/i18n/lv/libkppp.ts +++ b/i18n/lv/libkppp.ts @@ -320,7 +320,7 @@ the device "%1"? Confirm - + Apstiprināt New Device @@ -800,7 +800,7 @@ you setup the modem Add - + Pievienot Remove @@ -1256,7 +1256,7 @@ Ask your system administrator to create this file (can be empty) with appropriat ScriptWidget Add - + Pievienot Insert diff --git a/i18n/lv/libwellenreiter.ts b/i18n/lv/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/lv/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/lv/libwlan.ts b/i18n/lv/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/lv/libwlan.ts +++ b/i18n/lv/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/lv/wellenreiter.ts b/i18n/lv/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/lv/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/mk/camera.ts b/i18n/mk/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/mk/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/mk/libcamera.ts b/i18n/mk/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/mk/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/mk/libwellenreiter.ts b/i18n/mk/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/mk/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/mk/libwlan.ts b/i18n/mk/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/mk/libwlan.ts +++ b/i18n/mk/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/mk/wellenreiter.ts b/i18n/mk/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/mk/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/nl/camera.ts b/i18n/nl/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/nl/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/nl/libcamera.ts b/i18n/nl/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/nl/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/nl/libwellenreiter.ts b/i18n/nl/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/nl/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/nl/libwlan.ts b/i18n/nl/libwlan.ts index a8d8f9a..42463ce 100644 --- a/i18n/nl/libwlan.ts +++ b/i18n/nl/libwlan.ts @@ -1,24 +1,20 @@ AWLan - - <UseHostName> - - WLAN Wireless Configuration - WiFi Configuratie + WiFi Configuratie General - Algemeen + Algemeen Mode - Mode + Mode ESS-ID @@ -26,272 +22,228 @@ MAC - MAC + MAC Specify &Access Point - Kies &Access Point + Kies &Access Point Specify &Channel - Specificeer &kanaal + Specificeer &kanaal any - ieder + ieder Infrastructure - Infrastructuur + Infrastructuur Auto - Auto + Auto Managed - Managed + Managed Ad-Hoc - Ad-Hoc + Ad-Hoc Encryption - Versleuteling + Versleuteling &Enable Encryption - V&ersleuteling inschakelen + V&ersleuteling inschakelen &Key Setting - &Sleutelinstelling + &Sleutelinstelling Key &1 - Sleutel &1 + Sleutel &1 Key &2 - Sleutel &2 + Sleutel &2 Key &3 - Sleutel &3 + Sleutel &3 Key &4 - Sleutel &4 + Sleutel &4 Non-encrypted Packets - Niet-versleutelde pakketten + Niet-versleutelde pakketten &Accept - &Accepteer + &Accepteer &Reject - Annulee&r + Annulee&r SSID - SSID + SSID Rescan Neighbourhood - Herzoek omgeving + Herzoek omgeving Chn - Kan + Kan WLanGUI - Form1 - - - General - Algemeen + Algemeen Auto - Auto + Auto Managed - Managed + Managed Ad-Hoc - Ad-Hoc - - - Name - + Ad-Hoc Mode - Mode + Mode ESS-ID - ESS-ID - - - <UseHostName> - - - - Specify Access Point - + ESS-ID MAC - MAC + MAC Encryption - Versleuteling + Versleuteling &Enable Encryption - V&ersleuteling inschakelen + V&ersleuteling inschakelen &Key Setting - &Sleutelinstelling + &Sleutelinstelling Key &1 - Sleutel &1 + Sleutel &1 Key &4 - Sleutel &4 + Sleutel &4 Key &2 - Sleutel &2 + Sleutel &2 Key &3 - Sleutel &3 - - - Accept Non-Encrypted packets - - - - State - + Sleutel &3 AP - AP + AP Rate - Snelheid + Snelheid Channel - Kanaal + Kanaal Station - Station + Station ESSID - ESSID - - - Frequency - - - - Link Quality - + ESSID Noise - Ruis + Ruis Quality - Kwalitiet + Kwalitiet Signal - Signaal - - - Live feed - + Signaal WLanNetNode - - WLan Device - - - - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> - - WlanInfo Interface Information - Verbindingsinformatie + Verbindingsinformatie 802.11b - 802.11b + 802.11b Channel - Kanaal + Kanaal Mode - Mode + Mode ESSID - ESSID + ESSID Station - Station + Station AP - AP + AP Rate - Snelheid + Snelheid Quality - Kwalitiet + Kwalitiet Noise - Ruis + Ruis Signal - Signaal + Signaal diff --git a/i18n/nl/wellenreiter.ts b/i18n/nl/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/nl/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/no/camera.ts b/i18n/no/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/no/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/no/libcamera.ts b/i18n/no/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/no/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/no/libwellenreiter.ts b/i18n/no/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/no/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/no/libwlan.ts b/i18n/no/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/no/libwlan.ts +++ b/i18n/no/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/no/wellenreiter.ts b/i18n/no/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/no/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/pl/camera.ts b/i18n/pl/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/pl/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/pl/libcamera.ts b/i18n/pl/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/pl/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/pl/libwellenreiter.ts b/i18n/pl/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/pl/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/pl/libwlan.ts b/i18n/pl/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/pl/libwlan.ts +++ b/i18n/pl/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/pl/wellenreiter.ts b/i18n/pl/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/pl/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/pt/camera.ts b/i18n/pt/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/pt/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/pt/libcamera.ts b/i18n/pt/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/pt/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/pt/libwellenreiter.ts b/i18n/pt/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/pt/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/pt/libwlan.ts b/i18n/pt/libwlan.ts index e85a06c..08f2b53 100644 --- a/i18n/pt/libwlan.ts +++ b/i18n/pt/libwlan.ts @@ -1,24 +1,20 @@ AWLan - - <UseHostName> - - WLAN Wireless Configuration - Configuração de Rede sem Fios + Configuração de Rede sem Fios General - Geral + Geral Mode - Modo + Modo ESS-ID @@ -26,260 +22,228 @@ MAC - MAC + MAC Specify &Access Point - Especificar o Ponto de &Acesso + Especificar o Ponto de &Acesso Specify &Channel - Especificar o &Canal + Especificar o &Canal any - qualquer + qualquer Infrastructure - Infraestrutura + Infraestrutura Auto - Auto + Auto Managed - "Managed" + "Managed" Ad-Hoc - "Ad-Hoc" + "Ad-Hoc" Encryption - Encriptação + Encriptação &Enable Encryption - &Activar Encriptação + &Activar Encriptação &Key Setting - Configuração da &Chave + Configuração da &Chave Key &1 - Chave &1 + Chave &1 Key &2 - Chave &2 + Chave &2 Key &3 - Chave &3 + Chave &3 Key &4 - Chave &4 + Chave &4 Non-encrypted Packets - Pacotes não encriptados + Pacotes não encriptados &Accept - &Aceitar + &Aceitar &Reject - &Rejeitar + &Rejeitar - - - WLanGUI - Form1 + SSID + Rescan Neighbourhood + + + + Chn + + + + + WLanGUI + General - Geral + Geral Auto - Auto + Auto Managed - "Managed" + "Managed" Ad-Hoc - "Ad-Hoc" - - - Name - + "Ad-Hoc" Mode - Modo + Modo ESS-ID - ESSID - - - <UseHostName> - - - - Specify Access Point - + ESSID MAC - MAC + MAC Encryption - Encriptação + Encriptação &Enable Encryption - &Activar Encriptação + &Activar Encriptação &Key Setting - Configuração da &Chave + Configuração da &Chave Key &1 - Chave &1 + Chave &1 Key &4 - Chave &4 + Chave &4 Key &2 - Chave &2 + Chave &2 Key &3 - Chave &3 - - - Accept Non-Encrypted packets - - - - State - + Chave &3 AP - PA + PA Rate - Velocidade + Velocidade Channel - Canal + Canal Station - Estação + Estação ESSID - ESSID - - - Frequency - - - - Link Quality - + ESSID Noise - Ruído + Ruído Quality - Qualidade + Qualidade Signal - Sinal - - - Live feed - + Sinal WLanNetNode - - WLan Device - - - - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> - - WlanInfo Interface Information - Informação da Interface + Informação da Interface 802.11b - 802.11b + 802.11b Channel - Canal + Canal Mode - Modo + Modo ESSID - ESSID + ESSID Station - Estação + Estação AP - PA + PA Rate - Velocidade + Velocidade Quality - Qualidade + Qualidade Noise - Ruído + Ruído Signal - Sinal + Sinal diff --git a/i18n/pt/wellenreiter.ts b/i18n/pt/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/pt/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/pt_BR/camera.ts b/i18n/pt_BR/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/pt_BR/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/pt_BR/libcamera.ts b/i18n/pt_BR/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/pt_BR/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/pt_BR/libwellenreiter.ts b/i18n/pt_BR/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/pt_BR/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/pt_BR/libwlan.ts b/i18n/pt_BR/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/pt_BR/libwlan.ts +++ b/i18n/pt_BR/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/pt_BR/wellenreiter.ts b/i18n/pt_BR/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/pt_BR/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/ru/camera.ts b/i18n/ru/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/ru/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/ru/libcamera.ts b/i18n/ru/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/ru/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/ru/libwellenreiter.ts b/i18n/ru/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/ru/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/ru/libwlan.ts b/i18n/ru/libwlan.ts index daf795f..eff53d6 100644 --- a/i18n/ru/libwlan.ts +++ b/i18n/ru/libwlan.ts @@ -1,293 +1,241 @@ AWLan - - <UseHostName> - - WLAN Wireless Configuration - Конфигурация радиосети + Конфигурация радиосети General - Общие + Общие Mode - Режим + Режим MAC - MAC + MAC Specify &Access Point - Указать &Точку доступа + Указать &Точку доступа Specify &Channel - Указать &Канал + Указать &Канал any - любой + любой Infrastructure - Инфраструктура + Инфраструктура Auto - Авто + Авто Managed - Управляемый + Управляемый Ad-Hoc - Равноправный + Равноправный Encryption - Шифрование + Шифрование &Enable Encryption - &Включить шифрование + &Включить шифрование &Key Setting - &Настройка ключей + &Настройка ключей Key &1 - Ключ &1 + Ключ &1 Key &2 - Ключ &2 + Ключ &2 Key &3 - Ключ &3 + Ключ &3 Key &4 - Ключ &4 + Ключ &4 Non-encrypted Packets - Незашифрованные пакеты + Незашифрованные пакеты &Accept - &Принимать + &Принимать &Reject - &Отвергать + &Отвергать SSID - SSID + SSID Rescan Neighbourhood - Просканировать окрестности + Просканировать окрестности Chn - Кнл + Кнл WLanGUI - Form1 - - - General - Общие + Общие Auto - Авто + Авто Managed - Управляемый + Управляемый Ad-Hoc - Равноправный - - - Name - + Равноправный Mode - Режим - - - ESS-ID - - - - <UseHostName> - - - - Specify Access Point - + Режим MAC - MAC + MAC Encryption - Шифрование + Шифрование &Enable Encryption - &Включить шифрование + &Включить шифрование &Key Setting - &Настройка ключей + &Настройка ключей Key &1 - Ключ &1 + Ключ &1 Key &4 - Ключ &4 + Ключ &4 Key &2 - Ключ &2 + Ключ &2 Key &3 - Ключ &3 - - - Accept Non-Encrypted packets - - - - State - + Ключ &3 AP - Точка доступа + Точка доступа Rate - Скорость + Скорость Channel - Канал + Канал Station - Станция + Станция ESSID - ESSID - - - Frequency - - - - Link Quality - + ESSID Noise - Шум + Шум Quality - Качество + Качество Signal - Сигнал - - - Live feed - + Сигнал WLanNetNode - - WLan Device - - - - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> - - WlanInfo Interface Information - Информация интерфейса + Информация интерфейса 802.11b - 802.11b + 802.11b Channel - Канал + Канал Mode - Режим + Режим ESSID - ESSID + ESSID Station - Станция + Станция AP - Точка доступа + Точка доступа Rate - Скорость + Скорость Quality - Качество + Качество Noise - Шум + Шум Signal - Сигнал + Сигнал diff --git a/i18n/ru/wellenreiter.ts b/i18n/ru/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/ru/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/sl/camera.ts b/i18n/sl/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/sl/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/sl/libcamera.ts b/i18n/sl/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/sl/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/sl/libwellenreiter.ts b/i18n/sl/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/sl/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/sl/libwlan.ts b/i18n/sl/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/sl/libwlan.ts +++ b/i18n/sl/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/sl/wellenreiter.ts b/i18n/sl/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/sl/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/xx/camera.ts b/i18n/xx/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/xx/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/xx/libcamera.ts b/i18n/xx/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/xx/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/xx/libwellenreiter.ts b/i18n/xx/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/xx/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/xx/libwlan.ts b/i18n/xx/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/xx/libwlan.ts +++ b/i18n/xx/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/xx/wellenreiter.ts b/i18n/xx/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/xx/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/zh_CN/camera.ts b/i18n/zh_CN/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/zh_CN/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/zh_CN/libcamera.ts b/i18n/zh_CN/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/zh_CN/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/zh_CN/libwellenreiter.ts b/i18n/zh_CN/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/zh_CN/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/zh_CN/libwlan.ts b/i18n/zh_CN/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/zh_CN/libwlan.ts +++ b/i18n/zh_CN/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/zh_CN/wellenreiter.ts b/i18n/zh_CN/wellenreiter.ts new file mode 100644 index 0000000..ae20a32 --- a/dev/null +++ b/i18n/zh_CN/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + diff --git a/i18n/zh_TW/camera.ts b/i18n/zh_TW/camera.ts new file mode 100644 index 0000000..6f1acc7 --- a/dev/null +++ b/i18n/zh_TW/camera.ts @@ -0,0 +1,13 @@ + + + CameraMainWindow + + All + + + + Text + + + + diff --git a/i18n/zh_TW/libcamera.ts b/i18n/zh_TW/libcamera.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/zh_TW/libcamera.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/zh_TW/libwellenreiter.ts b/i18n/zh_TW/libwellenreiter.ts new file mode 100644 index 0000000..4eb9e18 --- a/dev/null +++ b/i18n/zh_TW/libwellenreiter.ts @@ -0,0 +1,2 @@ + + diff --git a/i18n/zh_TW/libwlan.ts b/i18n/zh_TW/libwlan.ts index 37fdc29..c1f7877 100644 --- a/i18n/zh_TW/libwlan.ts +++ b/i18n/zh_TW/libwlan.ts @@ -1,18 +1,11 @@ AWLan - - <UseHostName> - - WLAN - - - WLanGUI - Form1 + Wireless Configuration @@ -20,6 +13,18 @@ + any + + + + SSID + + + + Infrastructure + + + Auto @@ -32,27 +37,27 @@ - Name + Mode - Mode + Specify &Access Point - ESS-ID + MAC - <UseHostName> + Specify &Channel - Specify Access Point + Rescan Neighbourhood - MAC + Chn @@ -72,10 +77,6 @@ - Key &4 - - - Key &2 @@ -84,70 +85,73 @@ - Accept Non-Encrypted packets + Key &4 - State + Non-encrypted Packets - AP + &Accept - Rate + &Reject + + + WLanGUI + + + WLanNetNode + + + WlanInfo - Channel + Interface Information - Station + 802.11b - ESSID + Channel - Frequency + Mode - Link Quality + ESSID - Noise + Station - Quality + AP - Signal + Rate - Live feed + Quality - - - WLanNetNode - WLan Device + Noise - <p>Configure Wi/Fi or WLan network cards.</p><p>Defines Wireless options for those cards</p> + Signal - - WlanInfo - diff --git a/i18n/zh_TW/wellenreiter.ts b/i18n/zh_TW/wellenreiter.ts index e69de29..ae20a32 100644 --- a/i18n/zh_TW/wellenreiter.ts +++ b/i18n/zh_TW/wellenreiter.ts @@ -0,0 +1,768 @@ + + + MScanListView + + Net/Station + + + + # + + + + MAC + + + + Chn + + + + W + + + + T + + + + IP + + + + Manufacturer + + + + First Seen + + + + Last Seen + + + + Location + + + + + MStatWindow + + Protocol + + + + Count + + + + + ProtocolListView + + Protocol Family + + + + Perform Action + + + + + QObject + + Wellenreiter: trying to run as non-root! + + + + You have started Wellenreiter II +as non-root. You will have +only limited functionality. +Proceed anyway? + + + + You have a dhcp client running. +(PID = %1) +This can severly limit scanning! +Should I kill it for you? + + + + Restart your dhcp client? + + + + + Wellenreiter + + Your wireless card +should now be usable again. + + + + No device configured. +Please reconfigure! + + + + The configured device (%1) +is not available on this system +. Please reconfigure! + + + + Can't bring interface '%1' up: + + + + + <p>The Wireless Extension Versions<br>are not matching!<p> Wellenreiter II : WE V%1<br>Interface driver: WE V%2 + + + + Bring your device into +monitor mode now. + + + + Can't set interface '%1' +into monitor mode: + + + + + +Continue with limited functionality? + + + + Can't open packet capturer for +'%1': + + + + + Wellenreiter II - replaying capture file... + + + + Got packet with protocol '%1' + Protocol Name + + + + Can't do that! + + + + No wireless +interface available. + + + + Stop sniffing before +joining a net. + + + + Function only available on Embedded build + + + + + WellenreiterBase + + Wellenreiter/Opie + + + + Wellenreiter/X11 + + + + Nets + + + + Graph + + + + Log + + + + Hex + + + + Stat + + + + About + + + + Networks + + + + + WellenreiterConfigBase + + Wellenreiter II COnfiguration Dialog + + + + Interface + + + + <select> + + + + cisco + + + + wlan-ng + + + + hostap + + + + orinoco + + + + <manual> + + + + <file> + + + + Choose the type of driver used for sniffing. + + + + Driver: + + + + Choose the interface used for sniffing. + + + + Name: + + + + Perform Autodetection + + + + Retrigger the autodetection algorithm + + + + Use additional PRISM header + + + + Use additional PRISM headers, if available. + + + + Hop Channels + + + + Check this, if you want to start a channel hopper. + + + + every + + + + ms + + + + Choose the channel hop interval. + + + + Use Adaptive(TM) Hop Scheme + + + + An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in. + + + + Scan on channel + + + + Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they're not checked here. + + + + 6 + + + + 8 + + + + 2 + + + + 9 + + + + 1 + + + + All + + + + 11 + + + + 10 + + + + 7 + + + + 3 + + + + 5 + + + + 4 + + + + 12 + + + + 13 + + + + 14 + + + + Capture + + + + Browse + + + + Click to open a file requester to choose a capture file name. + + + + Write Capture Files To + + + + Check this to write an ethereal compatible capture file. + + + + /tmp/capture + + + + Configure the name of the capture file. + + + + Hex View Buffer + + + + unlimited + + + + limited to + + + + Packets + + + + Parse + + + + UI + + + + Lookup MAC vendor names + + + + Check this to lookup MAC vendor names. + + + + Open Tree On New Station + + + + Check this to automatically make a tree visible when a new station is detected. + + + + Disable Power Management + + + + Check this to disable power management while scanning. + + + + Action on detecting a new + + + + Wired Station: + + + + Network: + + + + <Ignore> + + + + Play Alarm + + + + Play Click + + + + Blink LED + + + + Run Script + + + + Choose an action to perform when a new wireless station is detected. + + + + The command line to execute when a script action is performed. + + + + Wireless Station: + + + + Choose the action to perform when a new wired station is detected. + + + + Choose an action to perform when a new network is detected. + + + + Intrusion + + + + Link Level + + + + Fake Mac: + + + + Send proble requests + + + + <automatic> + + + + 44:44:44:44:44:44 + + + + Try to authenticate + + + + Enable active scanning + + + + IP Level + + + + Request DHCP Address + + + + Fake IP: + + + + 192.168.125.1 + + + + GPS + + + + Enable GPS logging w/ gpsd + + + + Check this to log GPS coordinates. + + + + Host + + + + localhost + + + + Hostadress where the gps daemon listens on. + + + + : + + + + Port number where the gps daemon listens on. + + + + Start gpsd on localhost + + + + Check to start the GPS daemon on localhost. + + + + gpsd -p /dev/ttyS3 -s 4800 + + + + Command line to start the gps daemon. + + + + + WellenreiterMainWindow + + Click here to start scanning. + + + + Click here to stop scanning. + + + + Click here to open the configure dialog. + + + + Click here to upload a capture session. + + + + &Session... + + + + &Text Log... + + + + &Hex Log... + + + + &New + + + + &Load + + + + &Save + + + + &Upload Session + + + + &Exit + + + + &Configure... + + + + &Start + + + + Sto&p + + + + &Expand All + + + + &Collapse All + + + + &Add something + + + + &File + + + + &View + + + + &Sniffer + + + + &Demo + + + + Ready. + + + + Configure + + + + GPS said: +%1 + + + + All + + + + Text + + + + Sniffing in progress! +Please stop sniffing before closing. + + + + Upload Session + + + + From: + + + + Location: + + + + Comments: + + + + &Ok + + + + &Cancel + + + + Error + + + + <p>Logfile '%1' doesn't exist</p> + + + + <p>Can't open Logfile '%1'</p> + + + + Success + + + + Capture Dump was uploaded to %1 + + + + Connection to %1 failed + + + + -- cgit v0.9.0.2