Security Set passcode Намести лозинја Change passcode Смени лозинка Enter passcode Внеси лозинка Passcode incorrect Неточна лозинка The passcode entered is incorrect. Access denied Лозинката не е точна. Одбиен пристап Any Секој None Ништо Enter new passcode Внеси нова лозинка Re-enter new passcode Повтторно внеси лозинка Attention <p>All user-defined net ranges will be lost. Cancel Ok 192.168.129.0/24 192.168.129.0/24 192.168.1.0/24 192.168.1.0/24 192.168.0.0/16 192.168.0.0/24 172.16.0.0/12 172.16.0.0/12 10.0.0.0/8 10.0.0.0/8 1.0.0.0/8 1.0.0.0/8 SecurityBase Security Settings Сигурносни подесувања Change passcode Смени лозинка Clear passcode Избриши лозинка Require pass code at power-on Барај лозинка на подигање Sync Синхронизирај Accept sync from network: Прифати синхронизација од мрежа: 192.168.129.0/24 (default) 192.168.129.0/24 (основна) 192.168.1.0/24 192.168.1.0/24 192.168.0.0/16 192.168.0.0/24 172.16.0.0/12 172.16.0.0/12 10.0.0.0/8 10.0.0.0/8 1.0.0.0/8 1.0.0.0/8 Any Секој None Ништо <P>Pass code protection provides a minimal level of protection from casual access to this device. <p> Заштитата со лозинка дава минимални ниво на заштита од повремен пристап до уредот. Passcode Login Login Automatically This button will let you change the security passcode. Note: This is *not* the sync password. Delete the current passcode. You can enter a new one at any time. If you enable this option, a passcode must be entered after every resume event of your Zaurus. If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list. For the Zaurus 5x00 this is always the user "root". This drop-down list allows you to select the user for auto-login (if enabled above). You can only select an actually configured user. Select a net-range or enter a new one. This drop-down list lets you select a net range which is allowed to connect to your Zaurus. For example, a net range of 192.168.1.0/24 will allow any machine with an IP between 192.168.1.1 and 192.168.1.254 to connect to (and sync with) your Zaurus. The entry "All" will allow *any* IP to connect. The entry "None" will *deny* any connection. If unsure, select "Any". Delete Entry Delete the selected net range from the list If you press this button, the currently selected net range will be deleted from the list of net ranges. If you hit this button in error, the button "Restore Defaults" will restore the list to the state it has been when you initially booted your Zaurus. Restore Defaults This button will restore the list of net ranges to the defaults. Beware that all manually entered net ranges will be lost! Select your sync software IntelliSync Qtopia 1.7 Opie 1.0 Alter the Sync Protocol to tweak for the different devices. IntelliSync will disable the password check but you'll be prompted to accept the connection. Opie1.0 will be compatible with QtopiaDesktop, MultiSync and KitchenSync Qtopia1.7 will alter the way data is send to the client and will not work with older clients.