network settings: bind to specific ip address

Signed-off-by: Michael Krelin <hacker@klever.net>

9 files changed, 64 insertions, 48 deletions

diff --git a/PropsNetwork.cpp b/PropsNetwork.cpp
index b5585d7..2dd5913 100644..100755
--- a/PropsNetwork.cpp
+++ b/PropsNetwork.cpp
@@ -23,6 +23,7 @@ CPropsNetwork::CPropsNetwork() : CPropertyPage(CPropsNetwork::IDD)
         m_SpeakPort = 0;

         m_TimeOut = 0;

         m_BlockSize = 0;

+        m_ListenAddress = _T("");

         //}}AFX_DATA_INIT

 }

 

@@ -43,6 +44,8 @@ void CPropsNetwork::DoDataExchange(CDataExchange* pDX)
         DDX_Text(pDX, IDC_TIMEOUT, m_TimeOut);

         DDV_MinMaxUInt(pDX, m_TimeOut, 5, 60);

         DDX_Text(pDX, IDC_BLOCKSIZE, m_BlockSize);

+        DDX_Text(pDX, IDC_LISTENADDRESS, m_ListenAddress);

+        DDV_MaxChars(pDX, m_ListenAddress, 15);

         //}}AFX_DATA_MAP

 }

 

diff --git a/PropsNetwork.h b/PropsNetwork.h
index 67d0b53..565b090 100644..100755
--- a/PropsNetwork.h
+++ b/PropsNetwork.h
@@ -24,6 +24,7 @@ public:
                 UINTm_SpeakPort;

                 UINTm_TimeOut;

                 UINTm_BlockSize;

+                CStringm_ListenAddress;

         //}}AFX_DATA

 

 

diff --git a/PumpKINDlg.cpp b/PumpKINDlg.cpp
index 3ff1500..0c5c19b 100755
--- a/PumpKINDlg.cpp
+++ b/PumpKINDlg.cpp
@@ -1228,6 +1228,7 @@ CPropsACL acl;
         server.m_LogFile=m_LogFile;

 

         network.m_ListenPort=m_ListenPort;

+        network.m_ListenAddress=m_ListenAddress;

         network.m_SpeakPort=m_SpeakPort;

         network.m_TimeOut=m_TFTPTimeOut.GetTotalSeconds();

         network.m_BlockSize=m_BlockSize;

@@ -1251,6 +1252,7 @@ CPropsACL acl;
                 m_LogFile=server.m_LogFile;

 

                 m_ListenPort=network.m_ListenPort;

+                m_ListenAddress=network.m_ListenAddress;

                 m_SpeakPort=network.m_SpeakPort;

                 m_TFTPTimeOut=CTimeSpan(network.m_TimeOut);

                 m_BlockSize=network.m_BlockSize;

@@ -1875,6 +1877,7 @@ CWinApp *app = AfxGetApp();
         m_bnwAbort=app->GetProfileString("BellsNWhistles","Abort",m_bnwAbort);

         m_bTFTPSubdirs=app->GetProfileInt("TFTPSettings","Subdirs",m_bTFTPSubdirs);

         m_ListenPort=app->GetProfileInt("TFTPSettings","ListenPort",m_ListenPort);

+        m_ListenAddress=app->GetProfileString("TFTPSettings","ListenAddress",m_ListenAddress);

         m_LogLength=app->GetProfileInt("UISettings","LogLength",m_LogLength);

         m_PromptTimeOut=app->GetProfileInt("UISettings","PromptTimeout",m_PromptTimeOut);

         m_RRQMode=app->GetProfileInt("TFTPSettings","RRQMode",m_RRQMode);

@@ -1905,6 +1908,7 @@ CWinApp *app = AfxGetApp();
         app->WriteProfileString("BellsNWhistles","Abort",m_bnwAbort);

         app->WriteProfileInt("TFTPSettings","Subdirs",m_bTFTPSubdirs);

         app->WriteProfileInt("TFTPSettings","ListenPort",m_ListenPort);

+        app->WriteProfileString("TFTPSettings","ListenAddress",m_ListenAddress);

         app->WriteProfileInt("UISettings","LogLength",m_LogLength);

         app->WriteProfileInt("UISettings","PromptTimeout",m_PromptTimeOut);

         app->WriteProfileInt("TFTPSettings","RRQMode",m_RRQMode);

@@ -2067,16 +2071,14 @@ void CPumpKINDlg::OnHelp()
 

 BOOL CListenSocket::SetListen(BOOL b) {

         ASSERT(m_Daddy);

-        if(b==m_bListen)

-                return TRUE;

-        if(b) {

-                if(!Create(m_Daddy->m_ListenPort,SOCK_DGRAM))

-                        return FALSE;

-                return m_bListen=TRUE;

-        }else{

+        if(b==m_bListen) return TRUE;

+        if(!b) {

                 Close(); m_bListen=FALSE;

                 return TRUE;

         }

+        return m_bListen=Create(m_Daddy->m_ListenPort,SOCK_DGRAM,

+                FD_READ|FD_WRITE|FD_OOB|FD_ACCEPT|FD_CONNECT|FD_CLOSE,

+                m_Daddy->m_ListenAddress.IsEmpty()?NULL:(LPCTSTR)m_Daddy->m_ListenAddress);

 }

 

 void CPumpKINDlg::OnListening() 

diff --git a/PumpKINDlg.h b/PumpKINDlg.h
index 23c2657..9077292 100644..100755
--- a/PumpKINDlg.h
+++ b/PumpKINDlg.h
@@ -431,6 +431,7 @@ public:
         BOOL m_bTFTPSubdirs;

         CString m_TFTPRoot;

         UINT m_ListenPort;

+        CString m_ListenAddress;

         UINT m_BlockSize;

         CListenSocket m_Listener;

                 CPumpKINDlg(CWnd* pParent = NULL);// standard constructor

diff --git a/help/pumpkin.rtf b/help/pumpkin.rtf
index 8358490..39fc02a 100644
--- a/help/pumpkin.rtf
+++ b/help/pumpkin.rtf
@@ -14,11 +14,11 @@ DO NOT MODIFY THIS FILE DIRECTLY. EDIT XML DOCUMENT INSTEAD
 ${\footnote About PumpKIN}

 K{\footnote about}

 { \f1\fs18\b\sb120 About {\b PumpKIN}}

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 {\b PumpKIN} is a program designed to send and receive files over the net while having {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} session running using {\i TFTP} ({\uldb {\b RFC1350}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1350.txt")}) protocol. It includes full-functional {\i TFTP} server/client so it may be useful for maintaining {\uldb CISCO}{\v %!ExecFile("http://www.cisco.com/")} routers and other network equipment.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 {\b {\i Enjoy!}}

+\par\sa120\sb120\qj \f1\fs18\sb120 {\b PumpKIN} is a program designed to send and receive files over the net while having {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} session running using {\i TFTP} ({\uldb {\b RFC1350}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1350.txt")}) protocol. It includes full-functional {\i TFTP} server/client so it may be useful for maintaining {\uldb CISCO}{\v %!ExecFile("http://www.cisco.com/")} routers and other network equipment.
+\par\sa120\sb120\qj \f1\fs18\sb120 
+\par\sa120\sb120\qj \f1\fs18\sb120 {\b {\i Enjoy!}}
 {

-\par\pard\plain\sb360\sa120 \f1\fs16 Copyright (c) 1997-2006 {\uldb\cf0 Klever Group (http://www.klever.net/)}{\v %!ExecFile("http://www.klever.net/")}

+\par\pard\plain\sb360\sa120 \f1\fs16 Copyright (c) 1997-2011 {\uldb\cf0 Klever Group (http://www.klever.net/)}{\v %!ExecFile("http://www.klever.net/")}
 \par\qj\sb120\sa120Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

 \par The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

 \par \sa360 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

@@ -28,6 +28,8 @@ K{\footnote about}
 \pard\plain

 #{\footnote News}

 ${\footnote What's New}

+\par\pard\plain\f1\fs24\qc\cf2\b 2.7.2.1 - Apr 27th, 2011
+\par\pard\plain\fi0\li0\f1\fs18 \bullet  Fixed a minor bug that lead to misdiagnosis of the packet from unexpected source
 \par\pard\plain\f1\fs24\qc\cf2\b 2.7.2 - October 18th, 2006

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Added rejecting of too large file requests with explicit error message about the block size

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  A bit more elaborate logging

@@ -61,32 +63,32 @@ ${\footnote What's New}
 #{\footnote Using}

 ${\footnote Using PumpKIN}

 { \f1\fs18\b\sb120 Using {\b PumpKIN}}

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 This is a simple program for file exchange between two parties. It allows you to send files over the network to your party while having a {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} conversation. It uses open sessions to determine IP address of your party. Also you may use it as a {\i TFTP} client/server by itself. To get/put files from/to {\i TFTP} server you need to enter host name/IP address manually in the {\uldb Request Dialog}{\v Request}.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 To Abort transfer(s) currently in progress - select transfer(s) you want to terminate in the list and click {\b Abort xfer} button.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You may want to hide {\b PumpKIN} window and leave it as a tray icon only. Just click the \{bmct pumpkin.bmp\} icon in the tray or simply close the window.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 Use {\uldb Options}{\v Options} button to set {\b PumpKIN} options.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You can start and stop {\b PumpKIN}'s {\i TFTP} server by checking and unchecking the {\b Server is running} checkbox in the lower right corner of main {\b PumpKIN} window.

+\par\sa120\sb120\qj \f1\fs18\sb120 This is a simple program for file exchange between two parties. It allows you to send files over the network to your party while having a {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} conversation. It uses open sessions to determine IP address of your party. Also you may use it as a {\i TFTP} client/server by itself. To get/put files from/to {\i TFTP} server you need to enter host name/IP address manually in the {\uldb Request Dialog}{\v Request}.
+\par\sa120\sb120\qj \f1\fs18\sb120 To Abort transfer(s) currently in progress - select transfer(s) you want to terminate in the list and click {\b Abort xfer} button.
+\par\sa120\sb120\qj \f1\fs18\sb120 You may want to hide {\b PumpKIN} window and leave it as a tray icon only. Just click the \{bmct pumpkin.bmp\} icon in the tray or simply close the window.
+\par\sa120\sb120\qj \f1\fs18\sb120 Use {\uldb Options}{\v Options} button to set {\b PumpKIN} options.
+\par\sa120\sb120\qj \f1\fs18\sb120 You can start and stop {\b PumpKIN}'s {\i TFTP} server by checking and unchecking the {\b Server is running} checkbox in the lower right corner of main {\b PumpKIN} window.
 \page

 

 \pard\plain\keepn

 #{\footnote ConfirmRRQ}

 ${\footnote Confirm Read Request Dialog}

 { \f1\fs18\b\sb120 Confirm Read Request Dialog}

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 When the file is requested from your {\i TFTP} server you may choose to {\b Grant Access} to this file or to {\b Deny Access}. If you hesitate to answer for {\uldb {\b Confirmation timeout}}{\v ConfirmationTimeout} ({\i default - 30 seconds}) {\b PumpKIN} defaults to denial of all requests.

+\par\sa120\sb120\qj \f1\fs18\sb120 When the file is requested from your {\i TFTP} server you may choose to {\b Grant Access} to this file or to {\b Deny Access}. If you hesitate to answer for {\uldb {\b Confirmation timeout}}{\v ConfirmationTimeout} ({\i default - 30 seconds}) {\b PumpKIN} defaults to denial of all requests.
 \page

 

 \pard\plain\keepn

 #{\footnote ConfirmWRQ}

 ${\footnote Confirm Write Request Dialog}

 { \f1\fs18\b\sb120 Confirm Write Request Dialog}

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 Whenever your party sends you a file you have always a choice to accept it or not. You can also save the file under a different name by choosing the {\b Rename} option. If you already have file with such name you may chose to {\b resume} transfer. No checking on file contents is done. This option may or may not work depending on remote implementation of protocol. It does work if you use {\b PumpKIN} on both ends. If you are still unsure for {\uldb {\b Confirmation timeout}}{\v ConfirmationTimeOut} ({\i default - 30 seconds}) {\b PumpKIN} will make safe decision for you (deny).

+\par\sa120\sb120\qj \f1\fs18\sb120 Whenever your party sends you a file you have always a choice to accept it or not. You can also save the file under a different name by choosing the {\b Rename} option. If you already have file with such name you may chose to {\b resume} transfer. No checking on file contents is done. This option may or may not work depending on remote implementation of protocol. It does work if you use {\b PumpKIN} on both ends. If you are still unsure for {\uldb {\b Confirmation timeout}}{\v ConfirmationTimeOut} ({\i default - 30 seconds}) {\b PumpKIN} will make safe decision for you (deny).
 \page

 

 \pard\plain\keepn

 #{\footnote Request}

 ${\footnote Request Dialog}

 { \f1\fs18\b\sb120 Request Dialog}

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 Request dialog is aimed to let you form read or write request. You may set the following options:\pard

+\par\sa120\sb120\qj \f1\fs18\sb120 Request dialog is aimed to let you form read or write request. You may set the following options:\pard
 \par \fi0\li0 \bullet   {\b Local File} - You can change the name of the file you're sending (or destination in case you're receiving) right here. You may also use {\b Browse} button to select the file.

 \par \fi0\li0 \bullet   {\b Remote File} Specifies the name of file on the remote host you're requesting (in case of read request) or the name of file you want your file to appear as (in case of write request).

 \par \fi0\li0 \bullet   {\b Remote Host} is your party's host or {\i TFTP} server you're requesting file from/sending file to. To refresh the list of your talk windows use {\b REFRESH} button.

@@ -98,7 +100,7 @@ ${\footnote Request Dialog}
 #{\footnote Options}

 ${\footnote Options}

 { \f1\fs18\b\sb120 Options}

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 {\b PumpKIN} options property sheet consists of two tabs. For more information see {\uldb {\b Network}}{\v NetworkOptions} and {\b Server} options.

+\par\sa120\sb120\qj \f1\fs18\sb120 {\b PumpKIN} options property sheet consists of two tabs. For more information see {\uldb {\b Network}}{\v NetworkOptions} and {\b Server} options.
 \page

 

 \pard\plain\keepn

@@ -107,6 +109,7 @@ ${\footnote Network Options}
 { \f1\fs18\b\sb120 Network Options}\pard

 \par \fi0\li0 \bullet   {\b UDP Ports}\pard

 \par \fi0\li0 \bullet   {\b Listen for incoming connections on port} - specifies the port we're listening to. The default as defined in {\uldb {\b RFC1350}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1350.txt")} is 69.

+\par \fi0\li0 \bullet   {\b ip address} - ip address to listen to.
 \par \fi0\li0 \bullet   {\b Send outgoing requests to port} - specifies the port we're going to send all requests to.\pard

 \par \fi0\li0 \bullet   {\b Default Connection timeout} - if there's no activity for specified time, transfer is considered to be dead and terminated. {\b PumpKIN} tries to propagate this value to remote as described in {\uldb {\b RFC1782}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1782.txt")} and {\uldb {\b RFC1784}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1784.txt")} if possible.

 \par \fi0\li0 \bullet   {\b Default Block Size} - {\b PumpKIN} tries to negotiate block size with remote using this value unless specified explicitly in request. If remote doesn't support {\uldb {\b RFC1782}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1782.txt")} and {\uldb {\b RFC1783}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1783.txt")}{\b PumpKIN} falls back to 512 bytes per block.\pard

@@ -128,18 +131,18 @@ ${\footnote Server Options}
 #{\footnote SoundsOptions}

 ${\footnote Sounds Options}

 { \f1\fs18\b\sb120 Sounds}

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You can customize {\b PumpKIN} sounds notifications here. There are three customizable sounds defined - {\b Incoming request}, which notifies you about incoming request prompt if you're set to be prompted whenever incoming request occurs. {\b xfer Aborted} - which happens to sound every time transfer is interrupted for whatever reason - time out, explicit kill, denied access, etc. {\b xfer Finished} means that your file was successfully transmitted.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You can select any {\b .wav} file or one of the predefined sounds from the dropdown list.

+\par\sa120\sb120\qj \f1\fs18\sb120 You can customize {\b PumpKIN} sounds notifications here. There are three customizable sounds defined - {\b Incoming request}, which notifies you about incoming request prompt if you're set to be prompted whenever incoming request occurs. {\b xfer Aborted} - which happens to sound every time transfer is interrupted for whatever reason - time out, explicit kill, denied access, etc. {\b xfer Finished} means that your file was successfully transmitted.
+\par\sa120\sb120\qj \f1\fs18\sb120 You can select any {\b .wav} file or one of the predefined sounds from the dropdown list.
 \page

 

 \pard\plain\keepn

 #{\footnote ACL}

 ${\footnote Access Lists}

 { \f1\fs18\b\sb120 Access Lists}

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You can slightly automate your access policies by setting up read/write request behavior for different incoming requests.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 The rule consists of {\b request type}, source network ({\b ip} and {\b netmask}) and {\b action} to take (see also {\uldb Server Options}{\v ServerOptions}).

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 When {\b PumpKIN} receives request it goes through the list of rules and bases its decision on the first matching rule. To rearrange order of rules, select the rule you wish to move and use up and down arrows buttons on the right. To remove rule, use the cross button.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 To add a new rule fill in the information about {\b request type}, source {\b address} and {\b netmask} and desired action. Then click on the 'Add new rule' button.

-\par\sa120\sb120\qj\pard \f1\fs18\sb120 If you wish to amend the rule, select it in the rules list, change parameters below and click the 'Replace rule' button.

+\par\sa120\sb120\qj \f1\fs18\sb120 You can slightly automate your access policies by setting up read/write request behavior for different incoming requests.
+\par\sa120\sb120\qj \f1\fs18\sb120 The rule consists of {\b request type}, source network ({\b ip} and {\b netmask}) and {\b action} to take (see also {\uldb Server Options}{\v ServerOptions}).
+\par\sa120\sb120\qj \f1\fs18\sb120 When {\b PumpKIN} receives request it goes through the list of rules and bases its decision on the first matching rule. To rearrange order of rules, select the rule you wish to move and use up and down arrows buttons on the right. To remove rule, use the cross button.
+\par\sa120\sb120\qj \f1\fs18\sb120 To add a new rule fill in the information about {\b request type}, source {\b address} and {\b netmask} and desired action. Then click on the 'Add new rule' button.
+\par\sa120\sb120\qj \f1\fs18\sb120 If you wish to amend the rule, select it in the rules list, change parameters below and click the 'Replace rule' button.
 \page

 }
\ No newline at end of file
diff --git a/help/pumpkin.xml b/help/pumpkin.xml
index 2e53edd..153219a 100644
--- a/help/pumpkin.xml
+++ b/help/pumpkin.xml
@@ -81,6 +81,7 @@
    <li><b>UDP Ports</b>

     <ul>

      <li><b>Listen for incoming connections on port</b> - specifies the port we're listening to. The default as defined in <rfc num="1350"/> is 69.</li>

+     <li><b>ip address</b> - ip address to listen to.</li>

      <li><b>Send outgoing requests to port</b> - specifies the port we're going to send all requests to.</li>

     </ul>

    </li>

diff --git a/pumpkin.clw b/pumpkin.clw
index 213d8c1..7fa927b 100644
--- a/pumpkin.clw
+++ b/pumpkin.clw
@@ -2,7 +2,7 @@
 

 [General Info]

 Version=1

-LastClass=CPumpKINDlg

+LastClass=CPropsNetwork

 LastTemplate=CComboBox

 NewFileInclude1=#include "stdafx.h"

 NewFileInclude2=#include "PumpKIN.h"

@@ -14,7 +14,7 @@ Class3=CAboutDlg
 

 ResourceCount=10

 Resource1=IDD_REQUEST

-Resource2=IDD_PROPS_NETWORK

+Resource2=IDD_PUMPKIN_DIALOG

 Resource3=IDD_CONFIRM_RRQ

 Resource4=IDD_PROPS_SERVER

 Class4=CPropsServer

@@ -33,7 +33,7 @@ Class12=CPropsSounds
 Resource9=IDM_POPUPS

 Class13=CPropsACL

 Class14=CACLTargetCombo

-Resource10=IDD_PUMPKIN_DIALOG

+Resource10=IDD_PROPS_NETWORK

 

 [CLS:CPumpKINApp]

 Type=0

@@ -110,7 +110,7 @@ Control18=IDC_LOGFILE_BROWSE,button,1342242880
 [DLG:IDD_PROPS_NETWORK]

 Type=1

 Class=CPropsNetwork

-ControlCount=15

+ControlCount=17

 Control1=IDC_STATIC,button,1342177287

 Control2=IDC_STATIC,static,1342308354

 Control3=IDC_LISTENPORT,edit,1350631552

@@ -126,6 +126,8 @@ Control12=IDC_STATIC,static,1342308352
 Control13=IDC_STATIC,static,1342308352

 Control14=IDC_BLOCKSIZE,edit,1350639744

 Control15=IDC_BSIZESPIN,msctls_updown32,1342177463

+Control16=IDC_STATIC,static,1342308354

+Control17=IDC_LISTENADDRESS,edit,1350631552

 

 [CLS:CPropsServer]

 Type=0

@@ -143,7 +145,7 @@ ImplementationFile=PropsNetwork.cpp
 BaseClass=CPropertyPage

 Filter=D

 VirtualFilter=idWC

-LastObject=IDC_BLOCKSIZE

+LastObject=IDC_LISTENADDRESS

 

 [DLG:IDD_CONFIRM_RRQ]

 Type=1

diff --git a/pumpkin.rc b/pumpkin.rc
index f52c4bd..babd066 100644..100755
--- a/pumpkin.rc
+++ b/pumpkin.rc
@@ -166,30 +166,32 @@ STYLE WS_CHILD | WS_DISABLED | WS_CAPTION
 CAPTION "Network"

 FONT 8, "MS Sans Serif"

 BEGIN

-    GROUPBOX        "UDP Ports",IDC_STATIC,7,7,286,40

+    GROUPBOX        "UDP Ports",IDC_STATIC,7,7,286,55

     RTEXT           "Listen for &incoming requests on port:",IDC_STATIC,13,

                     18,135,8

-    EDITTEXT        IDC_LISTENPORT,154,16,40,13,ES_AUTOHSCROLL

+    EDITTEXT        IDC_LISTENPORT,154,16,61,13,ES_AUTOHSCROLL

     CONTROL         "Spin1",IDC_LISTENSPIN,"msctls_updown32",UDS_WRAP | 

                     UDS_SETBUDDYINT | UDS_ALIGNRIGHT | UDS_AUTOBUDDY | 

-                    UDS_ARROWKEYS | UDS_NOTHOUSANDS,183,16,11,13

-    RTEXT           "Send &outging requests to port:",IDC_STATIC,13,31,135,8

-    EDITTEXT        IDC_SPEAKPORT,154,29,40,13,ES_AUTOHSCROLL

+                    UDS_ARROWKEYS | UDS_NOTHOUSANDS,204,16,11,13

+    RTEXT           "Send &outging requests to port:",IDC_STATIC,13,46,135,8

+    EDITTEXT        IDC_SPEAKPORT,154,44,61,13,ES_AUTOHSCROLL

     CONTROL         "Spin1",IDC_SPEAKSPIN,"msctls_updown32",UDS_WRAP | 

                     UDS_SETBUDDYINT | UDS_ALIGNRIGHT | UDS_AUTOBUDDY | 

-                    UDS_ARROWKEYS | UDS_NOTHOUSANDS,183,29,11,13

-    LTEXT           "Default connection timeout:",IDC_STATIC,7,52,88,8

-    EDITTEXT        IDC_TIMEOUT,110,50,40,13,ES_AUTOHSCROLL | ES_NUMBER

+                    UDS_ARROWKEYS | UDS_NOTHOUSANDS,204,43,11,13

+    LTEXT           "Default connection timeout:",IDC_STATIC,7,66,88,8

+    EDITTEXT        IDC_TIMEOUT,110,64,40,13,ES_AUTOHSCROLL | ES_NUMBER

     CONTROL         "Spin3",IDC_TIMESPIN,"msctls_updown32",UDS_WRAP | 

                     UDS_SETBUDDYINT | UDS_ALIGNRIGHT | UDS_AUTOBUDDY | 

-                    UDS_ARROWKEYS | UDS_NOTHOUSANDS,140,50,11,13

-    LTEXT           "Default block size:",IDC_STATIC,7,66,59,8

-    LTEXT           "seconds",IDC_STATIC,154,52,28,8

-    LTEXT           "bytes",IDC_STATIC,154,66,18,8

-    EDITTEXT        IDC_BLOCKSIZE,110,64,40,13,ES_AUTOHSCROLL | ES_NUMBER

+                    UDS_ARROWKEYS | UDS_NOTHOUSANDS,140,64,11,13

+    LTEXT           "Default block size:",IDC_STATIC,7,80,59,8

+    LTEXT           "seconds",IDC_STATIC,154,66,28,8

+    LTEXT           "bytes",IDC_STATIC,154,80,18,8

+    EDITTEXT        IDC_BLOCKSIZE,110,78,40,13,ES_AUTOHSCROLL | ES_NUMBER

     CONTROL         "Spin3",IDC_BSIZESPIN,"msctls_updown32",UDS_WRAP | 

                     UDS_SETBUDDYINT | UDS_ALIGNRIGHT | UDS_AUTOBUDDY | 

-                    UDS_ARROWKEYS | UDS_NOTHOUSANDS,140,64,11,13

+                    UDS_ARROWKEYS | UDS_NOTHOUSANDS,140,78,11,13

+    RTEXT           "ip address:",IDC_STATIC,13,32,135,8

+    EDITTEXT        IDC_LISTENADDRESS,154,28,61,14,ES_AUTOHSCROLL

 END

 

 IDD_CONFIRM_RRQ DIALOGEX 0, 0, 181, 79

diff --git a/resource.h b/resource.h
index 7961e5e..2c2fa02 100644..100755
--- a/resource.h
+++ b/resource.h
@@ -151,6 +151,7 @@
 #define IDC_LISTENING                   1052

 #define IDC_LOGFILE                     1053

 #define IDC_LOGFILE_BROWSE              1054

+#define IDC_LISTENADDRESS               1055

 #define ID_TRAY_HELP                    32771

 #define ID_TRAY_ABOUTPUMPKIN            32772

 #define ID_TRAY_EXIT                    32773

@@ -165,9 +166,9 @@
 // 

 #ifdef APSTUDIO_INVOKED

 #ifndef APSTUDIO_READONLY_SYMBOLS

-#define _APS_NEXT_RESOURCE_VALUE        155

+#define _APS_NEXT_RESOURCE_VALUE        156

 #define _APS_NEXT_COMMAND_VALUE         32781

-#define _APS_NEXT_CONTROL_VALUE         1055

+#define _APS_NEXT_CONTROL_VALUE         1056

 #define _APS_NEXT_SYMED_VALUE           102

 #endif

 #endif