prepared for 2.7.2 release2.7.2

git-svn-id: http://svn.klever.net/kin/pumpkin/trunk@199 fe716a7a-6dde-0310-88d9-d003556173a8

2 files changed, 4 insertions, 4 deletions

diff --git a/help/pumpkin.rtf b/help/pumpkin.rtf
index 0d4c4d0..8358490 100644
--- a/help/pumpkin.rtf
+++ b/help/pumpkin.rtf
@@ -1,64 +1,64 @@
 {\rtf1\ansi

 @{\footnote

 THIS FILE WAS AUTOMATICALLY GENERATED FROM XML DOCUMENT.

 DO NOT MODIFY THIS FILE DIRECTLY. EDIT XML DOCUMENT INSTEAD

 }

 {\fonttbl{\f0\froman Times New Roman;}{\f1\fswiss Arial;}{\f3\froman Symbol;}}{\colortbl;

    \red0\green0\blue0;\red0\green0\blue255;\red0\green255\blue255;\red0\green255\blue0;

    \red255\green0\blue255;\red255\green0\blue0;\red255\green255\blue0;\red255\green255\blue255;

    \red0\green0\blue128;\red0\green128\blue128;\red0\green128\blue0;\red128\green0\blue128;

    \red128\green0\blue0;\red128\green128\blue0;\red128\green128\blue128;\red192\green192\blue192;}

   

 \pard\plain\keepn

 #{\footnote About}

 ${\footnote About PumpKIN}

 K{\footnote about}

 { \f1\fs18\b\sb120 About {\b PumpKIN}}

 \par\sa120\sb120\qj\pard \f1\fs18\sb120 {\b PumpKIN} is a program designed to send and receive files over the net while having {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} session running using {\i TFTP} ({\uldb {\b RFC1350}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1350.txt")}) protocol. It includes full-functional {\i TFTP} server/client so it may be useful for maintaining {\uldb CISCO}{\v %!ExecFile("http://www.cisco.com/")} routers and other network equipment.

 \par\sa120\sb120\qj\pard \f1\fs18\sb120 

 \par\sa120\sb120\qj\pard \f1\fs18\sb120 {\b {\i Enjoy!}}

 {

 \par\pard\plain\sb360\sa120 \f1\fs16 Copyright (c) 1997-2006 {\uldb\cf0 Klever Group (http://www.klever.net/)}{\v %!ExecFile("http://www.klever.net/")}

 \par\qj\sb120\sa120Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

 \par The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

 \par \sa360 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

 }

 \page

 

 \pard\plain

 #{\footnote News}

 ${\footnote What's New}

-\par\pard\plain\f1\fs24\qc\cf2\b 2.7.2 - 

-\par\pard\plain\fi0\li0\f1\fs18 \bullet  Added rejecting of too large files requests with explicit error message about the block size

+\par\pard\plain\f1\fs24\qc\cf2\b 2.7.2 - October 18th, 2006

+\par\pard\plain\fi0\li0\f1\fs18 \bullet  Added rejecting of too large file requests with explicit error message about the block size

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  A bit more elaborate logging

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Not closing receive socket until the last ACK receved now

 \par\pard\plain\f1\fs24\qc\cf2\b 2.7.1 - March 13th, 2006

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Bugfix release

 \par\pard\plain\f1\fs24\qc\cf2\b 2.7 - February 28th, 2006

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Access lists based on request IP address and TFTP opcode for automating access policy

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Possibility to start/stop TFTP server, while keeping client functionality intact

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Logging to file

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Resizable main window

 \par\pard\plain\f1\fs24\qc\cf2\b 2.6 - August 6th, 2005

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  more robust solution to the backslash/slash dilemma

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  A bit more elaborate error reporting

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Fixed uninstall procedure so that it works on XP

 \par\pard\plain\f1\fs24\qc\cf2\b 2.5 - July 11th, 2004

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Change of {\uldb license}{\v About} and opening the source.

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Minor cosmetic changes

 \par\pard\plain\f1\fs24\qc\cf2\b 2.0 - June 13th, 1998

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Sounds customization. Now you can customize {\b PumpKIN} bells and whistles or turn them off completely.

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Previous version of {\b PumpKIN} had a bug causing it to misbehave when you're requesting file from remote {\i tftp} server using {\b IP Address} (as opposed to {\b hostname}).

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Typo causing {\b PumpKIN} to log outgoing request in reverse (i.e. {\i Requesting 'hostname' from 'filename'}) fixed.

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Something else that you may not notice and I can not remember.

 \par\pard\plain\f1\fs24\qc\cf2\b 1.5 - February 12th, 1998

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Transfer resumes. No checking on file contents is done, so it's up to you to decide whether you want to start transmission from the beginning or resume unfinished transfer.

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  Support for {\b block size}, {\b trasnfer size} and {\b transfer timeout} options as described in {\uldb {\b RFC1782}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1782.txt")}, {\uldb {\b RFC1783}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1783.txt")} and {\uldb {\b RFC1784}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1784.txt")}. I'm not sure if there are any other {\i TFTP} implementations supporting this, but at least it makes sense if you use {\b PumpKIN} on both ends.

 \par\pard\plain\fi0\li0\f1\fs18 \bullet  New Install program

 \page

 

 \pard\plain\keepn

 #{\footnote Using}

 ${\footnote Using PumpKIN}

 { \f1\fs18\b\sb120 Using {\b PumpKIN}}

 \par\sa120\sb120\qj\pard \f1\fs18\sb120 This is a simple program for file exchange between two parties. It allows you to send files over the network to your party while having a {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} conversation. It uses open sessions to determine IP address of your party. Also you may use it as a {\i TFTP} client/server by itself. To get/put files from/to {\i TFTP} server you need to enter host name/IP address manually in the {\uldb Request Dialog}{\v Request}.

diff --git a/help/pumpkin.xml b/help/pumpkin.xml
index 99cfa3d..2e53edd 100644
--- a/help/pumpkin.xml
+++ b/help/pumpkin.xml
@@ -1,45 +1,45 @@
 <?xml version="1.0"?>

 <winhelp>

  <topic id="About" title="About PumpKIN" keywords="about">

   <heading scroll="no">About <kin>PumpKIN</kin></heading>

   <p><kin>PumpKIN</kin> is a program designed to send and receive files over the net while having <kin href="http://kin.klever.net/T42/">T42</kin> or <product>Wintalk</product> session running using <term>TFTP</term> (<rfc num="1350"/>) protocol. It includes full-functional <term>TFTP</term> server/client so it may be useful for maintaining <a href="http://www.cisco.com/">CISCO</a> routers and other network equipment.</p>

   <p/>

   <p><b><i>Enjoy!</i></b></p>

   <license years="1997-2006"/>

   <credist/>

  </topic>

  <topic id="News" title="What's New">

-  <newsfor version="2.7.2" date="">

-   <ni>Added rejecting of too large files requests with explicit error message about the block size</ni>

+  <newsfor version="2.7.2" date="October 18th, 2006">

+   <ni>Added rejecting of too large file requests with explicit error message about the block size</ni>

    <ni>A bit more elaborate logging</ni>

    <ni>Not closing receive socket until the last ACK receved now</ni>

   </newsfor>

   <newsfor version="2.7.1" date="March 13th, 2006">

    <ni>Bugfix release</ni>

   </newsfor>

   <newsfor version="2.7" date="February 28th, 2006">

    <ni>Access lists based on request IP address and TFTP opcode for automating access policy</ni>

    <ni>Possibility to start/stop TFTP server, while keeping client functionality intact</ni>

    <ni>Logging to file</ni>

    <ni>Resizable main window</ni>

   </newsfor>

   <newsfor version="2.6" date="August 6th, 2005">

    <ni>more robust solution to the backslash/slash dilemma</ni>

    <ni>A bit more elaborate error reporting</ni>

    <ni>Fixed uninstall procedure so that it works on XP</ni>

   </newsfor>

   <newsfor version="2.5" date="July 11th, 2004">

    <ni>Change of <a href="#About">license</a> and opening the source.</ni>

    <ni>Minor cosmetic changes</ni>

   </newsfor>

   <newsfor version="2.0" date="June 13th, 1998">

    <ni>Sounds customization. Now you can customize <kin>PumpKIN</kin> bells and whistles or turn them off completely.</ni>

    <ni>Previous version of <kin>PumpKIN</kin> had a bug causing it to misbehave when you're requesting file from remote <term>tftp</term> server using <b>IP Address</b> (as opposed to <b>hostname</b>).</ni>

    <ni>Typo causing <kin>PumpKIN</kin> to log outgoing request in reverse (i.e. <i>Requesting 'hostname' from 'filename'</i>) fixed.</ni>

    <ni>Something else that you may not notice and I can not remember.</ni>

   </newsfor>

   <newsfor version="1.5" date="February 12th, 1998">

    <ni>Transfer resumes. No checking on file contents is done, so it's up to you to decide whether you want to start transmission from the beginning or resume unfinished transfer.</ni>

    <ni>Support for <b>block size</b>, <b>trasnfer size</b> and <b>transfer timeout</b> options as described in <rfc num="1782"/>, <rfc num="1783"/> and <rfc num="1784"/>. I'm not sure if there are any other <term>TFTP</term> implementations supporting this, but at least it makes sense if you use <kin>PumpKIN</kin> on both ends.</ni>

    <ni>New Install program</ni>

   </newsfor>