-rwxr-xr-x[-rw-r--r--] | PropsNetwork.cpp | 3 | ||||
-rwxr-xr-x[-rw-r--r--] | PropsNetwork.h | 1 | ||||
-rwxr-xr-x | PumpKINDlg.cpp | 16 | ||||
-rwxr-xr-x[-rw-r--r--] | PumpKINDlg.h | 1 | ||||
-rw-r--r-- | help/pumpkin.rtf | 43 | ||||
-rw-r--r-- | help/pumpkin.xml | 1 | ||||
-rw-r--r-- | pumpkin.clw | 12 | ||||
-rwxr-xr-x[-rw-r--r--] | pumpkin.rc | 30 | ||||
-rwxr-xr-x[-rw-r--r--] | resource.h | 5 |
9 files changed, 64 insertions, 48 deletions
diff --git a/PropsNetwork.cpp b/PropsNetwork.cpp index b5585d7..2dd5913 100644..100755 --- a/PropsNetwork.cpp +++ b/PropsNetwork.cpp @@ -10,52 +10,55 @@ #undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
/////////////////////////////////////////////////////////////////////////////
// CPropsNetwork property page
IMPLEMENT_DYNCREATE(CPropsNetwork, CPropertyPage)
CPropsNetwork::CPropsNetwork() : CPropertyPage(CPropsNetwork::IDD)
{
//{{AFX_DATA_INIT(CPropsNetwork)
m_ListenPort = 0;
m_SpeakPort = 0;
m_TimeOut = 0;
m_BlockSize = 0;
+ m_ListenAddress = _T("");
//}}AFX_DATA_INIT
}
CPropsNetwork::~CPropsNetwork()
{
}
void CPropsNetwork::DoDataExchange(CDataExchange* pDX)
{
CPropertyPage::DoDataExchange(pDX);
//{{AFX_DATA_MAP(CPropsNetwork)
DDX_Control(pDX, IDC_BSIZESPIN, m_BSizeSpinCtl);
DDX_Control(pDX, IDC_TIMESPIN, m_TimeSpinCtl);
DDX_Control(pDX, IDC_SPEAKSPIN, m_SpeakSpinCtl);
DDX_Control(pDX, IDC_LISTENSPIN, m_ListenSpinCtl);
DDX_Text(pDX, IDC_LISTENPORT, m_ListenPort);
DDX_Text(pDX, IDC_SPEAKPORT, m_SpeakPort);
DDX_Text(pDX, IDC_TIMEOUT, m_TimeOut);
DDV_MinMaxUInt(pDX, m_TimeOut, 5, 60);
DDX_Text(pDX, IDC_BLOCKSIZE, m_BlockSize);
+ DDX_Text(pDX, IDC_LISTENADDRESS, m_ListenAddress);
+ DDV_MaxChars(pDX, m_ListenAddress, 15);
//}}AFX_DATA_MAP
}
BEGIN_MESSAGE_MAP(CPropsNetwork, CPropertyPage)
//{{AFX_MSG_MAP(CPropsNetwork)
//}}AFX_MSG_MAP
END_MESSAGE_MAP()
/////////////////////////////////////////////////////////////////////////////
// CPropsNetwork message handlers
BOOL CPropsNetwork::OnInitDialog()
{
CPropertyPage::OnInitDialog();
diff --git a/PropsNetwork.h b/PropsNetwork.h index 67d0b53..565b090 100644..100755 --- a/PropsNetwork.h +++ b/PropsNetwork.h @@ -11,32 +11,33 @@ class CPropsNetwork : public CPropertyPage // Construction
public:
CPropsNetwork();
~CPropsNetwork();
// Dialog Data
//{{AFX_DATA(CPropsNetwork)
enum { IDD = IDD_PROPS_NETWORK };
CSpinButtonCtrl m_BSizeSpinCtl;
CSpinButtonCtrl m_TimeSpinCtl;
CSpinButtonCtrl m_SpeakSpinCtl;
CSpinButtonCtrl m_ListenSpinCtl;
UINT m_ListenPort;
UINT m_SpeakPort;
UINT m_TimeOut;
UINT m_BlockSize;
+ CString m_ListenAddress;
//}}AFX_DATA
// Overrides
// ClassWizard generate virtual function overrides
//{{AFX_VIRTUAL(CPropsNetwork)
protected:
virtual void DoDataExchange(CDataExchange* pDX); // DDX/DDV support
//}}AFX_VIRTUAL
// Implementation
protected:
// Generated message map functions
//{{AFX_MSG(CPropsNetwork)
virtual BOOL OnInitDialog();
//}}AFX_MSG
diff --git a/PumpKINDlg.cpp b/PumpKINDlg.cpp index 3ff1500..0c5c19b 100755 --- a/PumpKINDlg.cpp +++ b/PumpKINDlg.cpp @@ -1215,55 +1215,57 @@ CString rv = m_Daddy->m_TFTPRoot; void CPumpKINDlg::OnOptions()
{
CPropertySheet cps(IDS_TITLE_OPTIONS,this);
CPropsServer server;
CPropsNetwork network;
CPropsSounds sounds;
CPropsACL acl;
server.m_RRQMode=m_RRQMode;
server.m_TFTPRoot=m_TFTPRoot;
server.m_TFTPSubdirs=m_bTFTPSubdirs;
server.m_WRQMode=m_WRQMode;
server.m_PromptTimeOut=m_PromptTimeOut;
server.m_LogFile=m_LogFile;
network.m_ListenPort=m_ListenPort;
+ network.m_ListenAddress=m_ListenAddress;
network.m_SpeakPort=m_SpeakPort;
network.m_TimeOut=m_TFTPTimeOut.GetTotalSeconds();
network.m_BlockSize=m_BlockSize;
sounds.m_Request = m_bnwRequest;
sounds.m_Success = m_bnwSuccess;
sounds.m_Abort = m_bnwAbort;
acl.m_rulist = m_aclRules;
cps.AddPage(&server);
cps.AddPage(&network);
cps.AddPage(&sounds);
cps.AddPage(&acl);
if(cps.DoModal()==IDOK){
m_RRQMode=server.m_RRQMode;
m_TFTPRoot=server.m_TFTPRoot;
m_bTFTPSubdirs=server.m_TFTPSubdirs;
m_WRQMode=server.m_WRQMode;
m_PromptTimeOut=server.m_PromptTimeOut;
m_LogFile=server.m_LogFile;
m_ListenPort=network.m_ListenPort;
+ m_ListenAddress=network.m_ListenAddress;
m_SpeakPort=network.m_SpeakPort;
m_TFTPTimeOut=CTimeSpan(network.m_TimeOut);
m_BlockSize=network.m_BlockSize;
m_bnwRequest = sounds.m_Request;
m_bnwSuccess = sounds.m_Success;
m_bnwAbort = sounds.m_Abort;
m_aclRules = acl.m_rulist;
m_lastlogerr.Empty();
}
}
BOOL CRRQSocket::ConfirmRequest()
{
@@ -1862,62 +1864,64 @@ void CPumpKINDlg::OnTrayOptions() void CPumpKINDlg::OnTraySendfile()
{
OnPut();
}
void CPumpKINDlg::LoadSettings()
{
CWinApp *app = AfxGetApp();
ASSERT(app);
m_bListen=app->GetProfileInt("TFTPSettings","Listen",m_bListen);
m_bnwRequest=app->GetProfileString("BellsNWhistles","Request",m_bnwRequest);
m_bnwSuccess=app->GetProfileString("BellsNWhistles","Success",m_bnwSuccess);
m_bnwAbort=app->GetProfileString("BellsNWhistles","Abort",m_bnwAbort);
m_bTFTPSubdirs=app->GetProfileInt("TFTPSettings","Subdirs",m_bTFTPSubdirs);
m_ListenPort=app->GetProfileInt("TFTPSettings","ListenPort",m_ListenPort);
+ m_ListenAddress=app->GetProfileString("TFTPSettings","ListenAddress",m_ListenAddress);
m_LogLength=app->GetProfileInt("UISettings","LogLength",m_LogLength);
m_PromptTimeOut=app->GetProfileInt("UISettings","PromptTimeout",m_PromptTimeOut);
m_RRQMode=app->GetProfileInt("TFTPSettings","RRQMode",m_RRQMode);
m_SpeakPort=app->GetProfileInt("TFTPSettings","SpeakPort",m_SpeakPort);
m_TFTPRoot=app->GetProfileString("TFTPSettings","TFTPRoot",m_TFTPRoot);
m_LogFile=app->GetProfileString("General","LogFile",m_LogFile);
m_TFTPTimeOut=CTimeSpan(app->GetProfileInt("TFTPSettings","TFTPTimeout",m_TFTPTimeOut.GetTotalSeconds()));
m_BlockSize=app->GetProfileInt("TFTPSettings","TFTPBlockSize",m_BlockSize);
m_RetryTimeOut=CTimeSpan(app->GetProfileInt("TFTPSettings","RetryTimeout",m_RetryTimeOut.GetTotalSeconds()));
m_WRQMode=app->GetProfileInt("TFTPSettings","WRQMode",m_WRQMode);
m_bShown=app->GetProfileInt("UISettings","Visble",m_bShown);
if(m_TFTPRoot.IsEmpty()){
DWORD dL = ::GetCurrentDirectory(0,NULL);
VERIFY(::GetCurrentDirectory(dL,m_TFTPRoot.GetBuffer(dL)));
m_TFTPRoot.ReleaseBuffer();
}
::SetCurrentDirectory(m_TFTPRoot);
m_aclRules.LoadProfile(app);
}
void CPumpKINDlg::SaveSettings()
{
CWinApp *app = AfxGetApp();
ASSERT(app);
app->WriteProfileInt("TFTPSettings","Listen",m_bListen);
app->WriteProfileString("BellsNWhistles","Request",m_bnwRequest);
app->WriteProfileString("BellsNWhistles","Success",m_bnwSuccess);
app->WriteProfileString("BellsNWhistles","Abort",m_bnwAbort);
app->WriteProfileInt("TFTPSettings","Subdirs",m_bTFTPSubdirs);
app->WriteProfileInt("TFTPSettings","ListenPort",m_ListenPort);
+ app->WriteProfileString("TFTPSettings","ListenAddress",m_ListenAddress);
app->WriteProfileInt("UISettings","LogLength",m_LogLength);
app->WriteProfileInt("UISettings","PromptTimeout",m_PromptTimeOut);
app->WriteProfileInt("TFTPSettings","RRQMode",m_RRQMode);
app->WriteProfileInt("TFTPSettings","SpeakPort",m_SpeakPort);
app->WriteProfileString("TFTPSettings","TFTPRoot",m_TFTPRoot);
app->WriteProfileString("General","LogFile",m_LogFile);
app->WriteProfileInt("TFTPSettings","TFTPTimeout",m_TFTPTimeOut.GetTotalSeconds());
app->WriteProfileInt("TFTPSettings","TFTPBlockSize",m_BlockSize);
app->WriteProfileInt("TFTPSettings","RetryTimeout",m_RetryTimeOut.GetTotalSeconds());
app->WriteProfileInt("TFTPSettings","WRQMode",m_WRQMode);
app->WriteProfileInt("UISettings","Visble",m_bShown);
m_aclRules.SaveProfile(app);
}
void CPumpKINDlg::OnWindowPosChanging(WINDOWPOS FAR* lpwndpos)
{
@@ -2054,42 +2058,40 @@ tftp* rv = Allocate(src->length); }
void CXferSocket::SetTry(tftp *p)
{
if(m_Retry)
delete m_Retry;
m_Retry=p?tftp::Copy(p):NULL;
}
void CPumpKINDlg::OnHelp()
{
AfxGetApp()->WinHelp(0,HELP_FINDER);
}
BOOL CListenSocket::SetListen(BOOL b) {
ASSERT(m_Daddy);
- if(b==m_bListen)
- return TRUE;
- if(b) {
- if(!Create(m_Daddy->m_ListenPort,SOCK_DGRAM))
- return FALSE;
- return m_bListen=TRUE;
- }else{
+ if(b==m_bListen) return TRUE;
+ if(!b) {
Close(); m_bListen=FALSE;
return TRUE;
}
+ return m_bListen=Create(m_Daddy->m_ListenPort,SOCK_DGRAM,
+ FD_READ|FD_WRITE|FD_OOB|FD_ACCEPT|FD_CONNECT|FD_CLOSE,
+ m_Daddy->m_ListenAddress.IsEmpty()?NULL:(LPCTSTR)m_Daddy->m_ListenAddress);
}
void CPumpKINDlg::OnListening()
{
if(!m_Listener.SetListen(m_ListenCtl.GetCheck()==1)) {
TRACE0("Failed to create socket\n");
AfxMessageBox(IDS_BOX_CANTBIND,MB_OK|MB_ICONEXCLAMATION);
}
m_ListenCtl.SetCheck(m_Listener.m_bListen?1:0);
m_bListen=m_Listener.m_bListen;
}
void CPumpKINDlg::OnTrayListen()
{
if(!m_Listener.SetListen(!m_Listener.m_bListen)) {
TRACE0("Failed to create socket\n");
diff --git a/PumpKINDlg.h b/PumpKINDlg.h index 23c2657..9077292 100644..100755 --- a/PumpKINDlg.h +++ b/PumpKINDlg.h @@ -418,32 +418,33 @@ public: rrqFallback=acl_rule::rrqNone,
rrqGrant=rrqGiveAll, rrqDeny=rrqDenyAll, rrqPrompt=rrqAlwaysConfirm
};
enum {
wrqTakeAll=acl_rule::wrqGrant,
wrqConfirmIfExists=acl_rule::wrqPromptIfExists,
wrqAlwaysConfirm=acl_rule::wrqPrompt,
wrqDenyAll=acl_rule::wrqDeny,
wrqFallback=acl_rule::wrqNone,
wrqGrant=wrqTakeAll,wrqDeny=wrqDenyAll, wrqPrompt=wrqAlwaysConfirm
};
UINT m_RRQMode;
UINT m_WRQMode;
BOOL m_bTFTPSubdirs;
CString m_TFTPRoot;
UINT m_ListenPort;
+ CString m_ListenAddress;
UINT m_BlockSize;
CListenSocket m_Listener;
CPumpKINDlg(CWnd* pParent = NULL); // standard constructor
// Dialog Data
//{{AFX_DATA(CPumpKINDlg)
enum { IDD = IDD_PUMPKIN_DIALOG };
CButton m_HelpCtl;
CButton m_PutCtl;
CButton m_GetCtl;
CButton m_ExitCtl;
CButton m_ListenCtl;
CButton m_AbortCtl;
CButton m_OptionsCtl;
CListBox m_Log;
CListCtrl m_List;
diff --git a/help/pumpkin.rtf b/help/pumpkin.rtf index 8358490..39fc02a 100644 --- a/help/pumpkin.rtf +++ b/help/pumpkin.rtf @@ -1,46 +1,48 @@ {\rtf1\ansi
@{\footnote
THIS FILE WAS AUTOMATICALLY GENERATED FROM XML DOCUMENT.
DO NOT MODIFY THIS FILE DIRECTLY. EDIT XML DOCUMENT INSTEAD
}
{\fonttbl{\f0\froman Times New Roman;}{\f1\fswiss Arial;}{\f3\froman Symbol;}}{\colortbl;
\red0\green0\blue0;\red0\green0\blue255;\red0\green255\blue255;\red0\green255\blue0;
\red255\green0\blue255;\red255\green0\blue0;\red255\green255\blue0;\red255\green255\blue255;
\red0\green0\blue128;\red0\green128\blue128;\red0\green128\blue0;\red128\green0\blue128;
\red128\green0\blue0;\red128\green128\blue0;\red128\green128\blue128;\red192\green192\blue192;}
\pard\plain\keepn
#{\footnote About}
${\footnote About PumpKIN}
K{\footnote about}
{ \f1\fs18\b\sb120 About {\b PumpKIN}}
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 {\b PumpKIN} is a program designed to send and receive files over the net while having {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} session running using {\i TFTP} ({\uldb {\b RFC1350}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1350.txt")}) protocol. It includes full-functional {\i TFTP} server/client so it may be useful for maintaining {\uldb CISCO}{\v %!ExecFile("http://www.cisco.com/")} routers and other network equipment.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 {\b {\i Enjoy!}}
+\par\sa120\sb120\qj \f1\fs18\sb120 {\b PumpKIN} is a program designed to send and receive files over the net while having {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} session running using {\i TFTP} ({\uldb {\b RFC1350}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1350.txt")}) protocol. It includes full-functional {\i TFTP} server/client so it may be useful for maintaining {\uldb CISCO}{\v %!ExecFile("http://www.cisco.com/")} routers and other network equipment. +\par\sa120\sb120\qj \f1\fs18\sb120 +\par\sa120\sb120\qj \f1\fs18\sb120 {\b {\i Enjoy!}} {
-\par\pard\plain\sb360\sa120 \f1\fs16 Copyright (c) 1997-2006 {\uldb\cf0 Klever Group (http://www.klever.net/)}{\v %!ExecFile("http://www.klever.net/")}
+\par\pard\plain\sb360\sa120 \f1\fs16 Copyright (c) 1997-2011 {\uldb\cf0 Klever Group (http://www.klever.net/)}{\v %!ExecFile("http://www.klever.net/")} \par\qj\sb120\sa120Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
\par The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
\par \sa360 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
}
\page
\pard\plain
#{\footnote News}
${\footnote What's New}
+\par\pard\plain\f1\fs24\qc\cf2\b 2.7.2.1 - Apr 27th, 2011 +\par\pard\plain\fi0\li0\f1\fs18 \bullet Fixed a minor bug that lead to misdiagnosis of the packet from unexpected source \par\pard\plain\f1\fs24\qc\cf2\b 2.7.2 - October 18th, 2006
\par\pard\plain\fi0\li0\f1\fs18 \bullet Added rejecting of too large file requests with explicit error message about the block size
\par\pard\plain\fi0\li0\f1\fs18 \bullet A bit more elaborate logging
\par\pard\plain\fi0\li0\f1\fs18 \bullet Not closing receive socket until the last ACK receved now
\par\pard\plain\f1\fs24\qc\cf2\b 2.7.1 - March 13th, 2006
\par\pard\plain\fi0\li0\f1\fs18 \bullet Bugfix release
\par\pard\plain\f1\fs24\qc\cf2\b 2.7 - February 28th, 2006
\par\pard\plain\fi0\li0\f1\fs18 \bullet Access lists based on request IP address and TFTP opcode for automating access policy
\par\pard\plain\fi0\li0\f1\fs18 \bullet Possibility to start/stop TFTP server, while keeping client functionality intact
\par\pard\plain\fi0\li0\f1\fs18 \bullet Logging to file
\par\pard\plain\fi0\li0\f1\fs18 \bullet Resizable main window
\par\pard\plain\f1\fs24\qc\cf2\b 2.6 - August 6th, 2005
\par\pard\plain\fi0\li0\f1\fs18 \bullet more robust solution to the backslash/slash dilemma
\par\pard\plain\fi0\li0\f1\fs18 \bullet A bit more elaborate error reporting
\par\pard\plain\fi0\li0\f1\fs18 \bullet Fixed uninstall procedure so that it works on XP
\par\pard\plain\f1\fs24\qc\cf2\b 2.5 - July 11th, 2004
@@ -48,98 +50,99 @@ ${\footnote What's New} \par\pard\plain\fi0\li0\f1\fs18 \bullet Minor cosmetic changes
\par\pard\plain\f1\fs24\qc\cf2\b 2.0 - June 13th, 1998
\par\pard\plain\fi0\li0\f1\fs18 \bullet Sounds customization. Now you can customize {\b PumpKIN} bells and whistles or turn them off completely.
\par\pard\plain\fi0\li0\f1\fs18 \bullet Previous version of {\b PumpKIN} had a bug causing it to misbehave when you're requesting file from remote {\i tftp} server using {\b IP Address} (as opposed to {\b hostname}).
\par\pard\plain\fi0\li0\f1\fs18 \bullet Typo causing {\b PumpKIN} to log outgoing request in reverse (i.e. {\i Requesting 'hostname' from 'filename'}) fixed.
\par\pard\plain\fi0\li0\f1\fs18 \bullet Something else that you may not notice and I can not remember.
\par\pard\plain\f1\fs24\qc\cf2\b 1.5 - February 12th, 1998
\par\pard\plain\fi0\li0\f1\fs18 \bullet Transfer resumes. No checking on file contents is done, so it's up to you to decide whether you want to start transmission from the beginning or resume unfinished transfer.
\par\pard\plain\fi0\li0\f1\fs18 \bullet Support for {\b block size}, {\b trasnfer size} and {\b transfer timeout} options as described in {\uldb {\b RFC1782}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1782.txt")}, {\uldb {\b RFC1783}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1783.txt")} and {\uldb {\b RFC1784}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1784.txt")}. I'm not sure if there are any other {\i TFTP} implementations supporting this, but at least it makes sense if you use {\b PumpKIN} on both ends.
\par\pard\plain\fi0\li0\f1\fs18 \bullet New Install program
\page
\pard\plain\keepn
#{\footnote Using}
${\footnote Using PumpKIN}
{ \f1\fs18\b\sb120 Using {\b PumpKIN}}
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 This is a simple program for file exchange between two parties. It allows you to send files over the network to your party while having a {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} conversation. It uses open sessions to determine IP address of your party. Also you may use it as a {\i TFTP} client/server by itself. To get/put files from/to {\i TFTP} server you need to enter host name/IP address manually in the {\uldb Request Dialog}{\v Request}.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 To Abort transfer(s) currently in progress - select transfer(s) you want to terminate in the list and click {\b Abort xfer} button.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You may want to hide {\b PumpKIN} window and leave it as a tray icon only. Just click the \{bmct pumpkin.bmp\} icon in the tray or simply close the window.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 Use {\uldb Options}{\v Options} button to set {\b PumpKIN} options.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You can start and stop {\b PumpKIN}'s {\i TFTP} server by checking and unchecking the {\b Server is running} checkbox in the lower right corner of main {\b PumpKIN} window.
+\par\sa120\sb120\qj \f1\fs18\sb120 This is a simple program for file exchange between two parties. It allows you to send files over the network to your party while having a {\uldb {\b T42}}{\v %!ExecFile("http://kin.klever.net/T42/")} or {\b\cf6 Wintalk} conversation. It uses open sessions to determine IP address of your party. Also you may use it as a {\i TFTP} client/server by itself. To get/put files from/to {\i TFTP} server you need to enter host name/IP address manually in the {\uldb Request Dialog}{\v Request}. +\par\sa120\sb120\qj \f1\fs18\sb120 To Abort transfer(s) currently in progress - select transfer(s) you want to terminate in the list and click {\b Abort xfer} button. +\par\sa120\sb120\qj \f1\fs18\sb120 You may want to hide {\b PumpKIN} window and leave it as a tray icon only. Just click the \{bmct pumpkin.bmp\} icon in the tray or simply close the window. +\par\sa120\sb120\qj \f1\fs18\sb120 Use {\uldb Options}{\v Options} button to set {\b PumpKIN} options. +\par\sa120\sb120\qj \f1\fs18\sb120 You can start and stop {\b PumpKIN}'s {\i TFTP} server by checking and unchecking the {\b Server is running} checkbox in the lower right corner of main {\b PumpKIN} window. \page
\pard\plain\keepn
#{\footnote ConfirmRRQ}
${\footnote Confirm Read Request Dialog}
{ \f1\fs18\b\sb120 Confirm Read Request Dialog}
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 When the file is requested from your {\i TFTP} server you may choose to {\b Grant Access} to this file or to {\b Deny Access}. If you hesitate to answer for {\uldb {\b Confirmation timeout}}{\v ConfirmationTimeout} ({\i default - 30 seconds}) {\b PumpKIN} defaults to denial of all requests.
+\par\sa120\sb120\qj \f1\fs18\sb120 When the file is requested from your {\i TFTP} server you may choose to {\b Grant Access} to this file or to {\b Deny Access}. If you hesitate to answer for {\uldb {\b Confirmation timeout}}{\v ConfirmationTimeout} ({\i default - 30 seconds}) {\b PumpKIN} defaults to denial of all requests. \page
\pard\plain\keepn
#{\footnote ConfirmWRQ}
${\footnote Confirm Write Request Dialog}
{ \f1\fs18\b\sb120 Confirm Write Request Dialog}
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 Whenever your party sends you a file you have always a choice to accept it or not. You can also save the file under a different name by choosing the {\b Rename} option. If you already have file with such name you may chose to {\b resume} transfer. No checking on file contents is done. This option may or may not work depending on remote implementation of protocol. It does work if you use {\b PumpKIN} on both ends. If you are still unsure for {\uldb {\b Confirmation timeout}}{\v ConfirmationTimeOut} ({\i default - 30 seconds}) {\b PumpKIN} will make safe decision for you (deny).
+\par\sa120\sb120\qj \f1\fs18\sb120 Whenever your party sends you a file you have always a choice to accept it or not. You can also save the file under a different name by choosing the {\b Rename} option. If you already have file with such name you may chose to {\b resume} transfer. No checking on file contents is done. This option may or may not work depending on remote implementation of protocol. It does work if you use {\b PumpKIN} on both ends. If you are still unsure for {\uldb {\b Confirmation timeout}}{\v ConfirmationTimeOut} ({\i default - 30 seconds}) {\b PumpKIN} will make safe decision for you (deny). \page
\pard\plain\keepn
#{\footnote Request}
${\footnote Request Dialog}
{ \f1\fs18\b\sb120 Request Dialog}
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 Request dialog is aimed to let you form read or write request. You may set the following options:\pard
+\par\sa120\sb120\qj \f1\fs18\sb120 Request dialog is aimed to let you form read or write request. You may set the following options:\pard \par \fi0\li0 \bullet {\b Local File} - You can change the name of the file you're sending (or destination in case you're receiving) right here. You may also use {\b Browse} button to select the file.
\par \fi0\li0 \bullet {\b Remote File} Specifies the name of file on the remote host you're requesting (in case of read request) or the name of file you want your file to appear as (in case of write request).
\par \fi0\li0 \bullet {\b Remote Host} is your party's host or {\i TFTP} server you're requesting file from/sending file to. To refresh the list of your talk windows use {\b REFRESH} button.
\par \fi0\li0 \bullet {\b Type} is the type of transfer as defined in {\uldb {\b RFC1350}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1350.txt")}. Doesn't mean much, really. Defined types are '{\i octet}' or '{\i netascii}'. Default is '{\i octet}'.
\par \fi0\li0 \bullet {\b Block Size} - Use this block size if remote is {\uldb {\b RFC1783}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1783.txt")}-compliant. If remote doesn't support this option {\b PumpKIN} will fallback to 512 bytes per block.\pard
\page
\pard\plain\keepn
#{\footnote Options}
${\footnote Options}
{ \f1\fs18\b\sb120 Options}
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 {\b PumpKIN} options property sheet consists of two tabs. For more information see {\uldb {\b Network}}{\v NetworkOptions} and {\b Server} options.
+\par\sa120\sb120\qj \f1\fs18\sb120 {\b PumpKIN} options property sheet consists of two tabs. For more information see {\uldb {\b Network}}{\v NetworkOptions} and {\b Server} options. \page
\pard\plain\keepn
#{\footnote NetworkOptions}
${\footnote Network Options}
{ \f1\fs18\b\sb120 Network Options}\pard
\par \fi0\li0 \bullet {\b UDP Ports}\pard
\par \fi0\li0 \bullet {\b Listen for incoming connections on port} - specifies the port we're listening to. The default as defined in {\uldb {\b RFC1350}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1350.txt")} is 69.
+\par \fi0\li0 \bullet {\b ip address} - ip address to listen to. \par \fi0\li0 \bullet {\b Send outgoing requests to port} - specifies the port we're going to send all requests to.\pard
\par \fi0\li0 \bullet {\b Default Connection timeout} - if there's no activity for specified time, transfer is considered to be dead and terminated. {\b PumpKIN} tries to propagate this value to remote as described in {\uldb {\b RFC1782}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1782.txt")} and {\uldb {\b RFC1784}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1784.txt")} if possible.
\par \fi0\li0 \bullet {\b Default Block Size} - {\b PumpKIN} tries to negotiate block size with remote using this value unless specified explicitly in request. If remote doesn't support {\uldb {\b RFC1782}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1782.txt")} and {\uldb {\b RFC1783}}{\v %!ExecFile("http://www.rfc-editor.org/rfc/rfc1783.txt")}{\b PumpKIN} falls back to 512 bytes per block.\pard
\page
\pard\plain\keepn
#{\footnote ServerOptions}
${\footnote Server Options}
{ \f1\fs18\b\sb120 Server Options}\pard
\par \fi0\li0 \bullet {\b TFTP Filesystem root} - Specifies the location of files you're transmitting or where to start looking for them from. Defaults to the directory you start {\b PumpKIN} for the first time from.
\par \fi0\li0 \bullet {\b Allow access to subdirectories} - specifies whether you want allow access to the whole subtree of {\b TFTP Root} or only to the directory itself.
\par \fi0\li0 \bullet {\b Read Request Behavior} - You may choose to automatically agree to give all files requested, to be prompted to confirm these operations, or to deny all requests as if you're not even here.
\par \fi0\li0 \bullet {\b Write Request Behavior} - You may chose to {\b take all files} ({\i not recommended}), to {\b prompt only if file exists already}, {\b Always prompt} or {\b Deny all requests}.
\par \fi0\li0 \bullet {#{\footnote ConfirmationTimeOut}}{\b Confirmation timeout} - this is the time {\b PumpKIN} will wait for you to accept or deny request before it will give up and take default action which is always deny.
\par \fi0\li0 \bullet {\b Log file} - If you want to enable logging to file, set the destination file here.\pard
\page
\pard\plain\keepn
#{\footnote SoundsOptions}
${\footnote Sounds Options}
{ \f1\fs18\b\sb120 Sounds}
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You can customize {\b PumpKIN} sounds notifications here. There are three customizable sounds defined - {\b Incoming request}, which notifies you about incoming request prompt if you're set to be prompted whenever incoming request occurs. {\b xfer Aborted} - which happens to sound every time transfer is interrupted for whatever reason - time out, explicit kill, denied access, etc. {\b xfer Finished} means that your file was successfully transmitted.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You can select any {\b .wav} file or one of the predefined sounds from the dropdown list.
+\par\sa120\sb120\qj \f1\fs18\sb120 You can customize {\b PumpKIN} sounds notifications here. There are three customizable sounds defined - {\b Incoming request}, which notifies you about incoming request prompt if you're set to be prompted whenever incoming request occurs. {\b xfer Aborted} - which happens to sound every time transfer is interrupted for whatever reason - time out, explicit kill, denied access, etc. {\b xfer Finished} means that your file was successfully transmitted. +\par\sa120\sb120\qj \f1\fs18\sb120 You can select any {\b .wav} file or one of the predefined sounds from the dropdown list. \page
\pard\plain\keepn
#{\footnote ACL}
${\footnote Access Lists}
{ \f1\fs18\b\sb120 Access Lists}
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 You can slightly automate your access policies by setting up read/write request behavior for different incoming requests.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 The rule consists of {\b request type}, source network ({\b ip} and {\b netmask}) and {\b action} to take (see also {\uldb Server Options}{\v ServerOptions}).
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 When {\b PumpKIN} receives request it goes through the list of rules and bases its decision on the first matching rule. To rearrange order of rules, select the rule you wish to move and use up and down arrows buttons on the right. To remove rule, use the cross button.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 To add a new rule fill in the information about {\b request type}, source {\b address} and {\b netmask} and desired action. Then click on the 'Add new rule' button.
-\par\sa120\sb120\qj\pard \f1\fs18\sb120 If you wish to amend the rule, select it in the rules list, change parameters below and click the 'Replace rule' button.
+\par\sa120\sb120\qj \f1\fs18\sb120 You can slightly automate your access policies by setting up read/write request behavior for different incoming requests. +\par\sa120\sb120\qj \f1\fs18\sb120 The rule consists of {\b request type}, source network ({\b ip} and {\b netmask}) and {\b action} to take (see also {\uldb Server Options}{\v ServerOptions}). +\par\sa120\sb120\qj \f1\fs18\sb120 When {\b PumpKIN} receives request it goes through the list of rules and bases its decision on the first matching rule. To rearrange order of rules, select the rule you wish to move and use up and down arrows buttons on the right. To remove rule, use the cross button. +\par\sa120\sb120\qj \f1\fs18\sb120 To add a new rule fill in the information about {\b request type}, source {\b address} and {\b netmask} and desired action. Then click on the 'Add new rule' button. +\par\sa120\sb120\qj \f1\fs18\sb120 If you wish to amend the rule, select it in the rules list, change parameters below and click the 'Replace rule' button. \page
}
\ No newline at end of file diff --git a/help/pumpkin.xml b/help/pumpkin.xml index 2e53edd..153219a 100644 --- a/help/pumpkin.xml +++ b/help/pumpkin.xml @@ -68,32 +68,33 @@ <li><b>Remote File</b> Specifies the name of file on the remote host you're requesting (in case of read request) or the name of file you want your file to appear as (in case of write request).</li>
<li><b>Remote Host</b> is your party's host or <term>TFTP</term> server you're requesting file from/sending file to. To refresh the list of your talk windows use <b>REFRESH</b> button.</li>
<li><b>Type</b> is the type of transfer as defined in <rfc num="1350"/>. Doesn't mean much, really. Defined types are '<i>octet</i>' or '<i>netascii</i>'. Default is '<i>octet</i>'.</li>
<li><b>Block Size</b> - Use this block size if remote is <rfc num="1783"/>-compliant. If remote doesn't support this option <kin>PumpKIN</kin> will fallback to 512 bytes per block.</li>
</ul>
</topic>
<topic id="Options" title="Options">
<heading scroll="no">Options</heading>
<p><kin>PumpKIN</kin> options property sheet consists of two tabs. For more information see <a href="#NetworkOptions"><b>Network</b></a> and <a herf="#ServerOptions"><b>Server</b></a> options.</p>
</topic>
<topic id="NetworkOptions" title="Network Options">
<heading scroll="no">Network Options</heading>
<ul>
<li><b>UDP Ports</b>
<ul>
<li><b>Listen for incoming connections on port</b> - specifies the port we're listening to. The default as defined in <rfc num="1350"/> is 69.</li>
+ <li><b>ip address</b> - ip address to listen to.</li>
<li><b>Send outgoing requests to port</b> - specifies the port we're going to send all requests to.</li>
</ul>
</li>
<li><b>Default Connection timeout</b> - if there's no activity for specified time, transfer is considered to be dead and terminated. <kin>PumpKIN</kin> tries to propagate this value to remote as described in <rfc num="1782"/> and <rfc num="1784"/> if possible.</li>
<li><b>Default Block Size</b> - <kin>PumpKIN</kin> tries to negotiate block size with remote using this value unless specified explicitly in request. If remote doesn't support <rfc num="1782"/> and <rfc num="1783"/> <kin>PumpKIN</kin> falls back to 512 bytes per block.</li>
</ul>
</topic>
<topic id="ServerOptions" title="Server Options">
<heading scroll="no">Server Options</heading>
<ul>
<li><b>TFTP Filesystem root</b> - Specifies the location of files you're transmitting or where to start looking for them from. Defaults to the directory you start <kin>PumpKIN</kin> for the first time from.</li>
<li><b>Allow access to subdirectories</b> - specifies whether you want allow access to the whole subtree of <b>TFTP Root</b> or only to the directory itself.</li>
<li><b>Read Request Behavior</b> - You may choose to automatically agree to give all files requested, to be prompted to confirm these operations, or to deny all requests as if you're not even here.</li>
<li><b>Write Request Behavior</b> - You may chose to <b>take all files</b> (<i>not recommended</i>), to <b>prompt only if file exists already</b>, <b>Always prompt</b> or <b>Deny all requests</b>.</li>
<li><a name="ConfirmationTimeOut"/><b>Confirmation timeout</b> - this is the time <kin>PumpKIN</kin> will wait for you to accept or deny request before it will give up and take default action which is always deny.</li>
<li><b>Log file</b> - If you want to enable logging to file, set the destination file here.</li>
diff --git a/pumpkin.clw b/pumpkin.clw index 213d8c1..7fa927b 100644 --- a/pumpkin.clw +++ b/pumpkin.clw @@ -1,52 +1,52 @@ ; CLW file contains information for the MFC ClassWizard
[General Info]
Version=1
-LastClass=CPumpKINDlg
+LastClass=CPropsNetwork
LastTemplate=CComboBox
NewFileInclude1=#include "stdafx.h"
NewFileInclude2=#include "PumpKIN.h"
ClassCount=14
Class1=CPumpKINApp
Class2=CPumpKINDlg
Class3=CAboutDlg
ResourceCount=10
Resource1=IDD_REQUEST
-Resource2=IDD_PROPS_NETWORK
+Resource2=IDD_PUMPKIN_DIALOG
Resource3=IDD_CONFIRM_RRQ
Resource4=IDD_PROPS_SERVER
Class4=CPropsServer
Class5=CPropsNetwork
Resource5=IDD_CONFIRM_WRQ
Resource6=IDD_PROPS_ACL
Class6=CConfirmRRQDlg
Class7=CConfirmWRQDlg
Resource7=IDD_ABOUTBOX
Class8=CRequestDlg
Class9=CResolver
Class10=CRetrier
Class11=CTrayer
Resource8=IDD_PROPS_SOUNDS
Class12=CPropsSounds
Resource9=IDM_POPUPS
Class13=CPropsACL
Class14=CACLTargetCombo
-Resource10=IDD_PUMPKIN_DIALOG
+Resource10=IDD_PROPS_NETWORK
[CLS:CPumpKINApp]
Type=0
HeaderFile=PumpKIN.h
ImplementationFile=PumpKIN.cpp
Filter=N
[CLS:CPumpKINDlg]
Type=0
HeaderFile=PumpKINDlg.h
ImplementationFile=PumpKINDlg.cpp
Filter=W
BaseClass=CDialog
VirtualFilter=dWC
LastObject=CPumpKINDlg
@@ -97,66 +97,68 @@ Control6=IDC_RRQ_GIVEALL,button,1342324745 Control7=IDC_RRQ_ALWAYSCONFIRM,button,1342193673
Control8=IDC_RRQ_DENYALL,button,1342193673
Control9=IDC_STATIC,button,1342308359
Control10=IDC_WRQ_TAKEALL,button,1342308361
Control11=IDC_WRQ_PROMPTEXISTING,button,1342177289
Control12=IDC_WRQ_ALWAYSCONFIRM,button,1342177289
Control13=IDC_WRQ_DENYALL,button,1342177289
Control14=IDC_STATIC,static,1342308609
Control15=IDC_PROMPTTIMEOUT,msctls_trackbar32,1342242823
Control16=IDC_STATIC,button,1342177287
Control17=IDC_LOGFILE,edit,1350631552
Control18=IDC_LOGFILE_BROWSE,button,1342242880
[DLG:IDD_PROPS_NETWORK]
Type=1
Class=CPropsNetwork
-ControlCount=15
+ControlCount=17
Control1=IDC_STATIC,button,1342177287
Control2=IDC_STATIC,static,1342308354
Control3=IDC_LISTENPORT,edit,1350631552
Control4=IDC_LISTENSPIN,msctls_updown32,1342177463
Control5=IDC_STATIC,static,1342308354
Control6=IDC_SPEAKPORT,edit,1350631552
Control7=IDC_SPEAKSPIN,msctls_updown32,1342177463
Control8=IDC_STATIC,static,1342308352
Control9=IDC_TIMEOUT,edit,1350639744
Control10=IDC_TIMESPIN,msctls_updown32,1342177463
Control11=IDC_STATIC,static,1342308352
Control12=IDC_STATIC,static,1342308352
Control13=IDC_STATIC,static,1342308352
Control14=IDC_BLOCKSIZE,edit,1350639744
Control15=IDC_BSIZESPIN,msctls_updown32,1342177463
+Control16=IDC_STATIC,static,1342308354
+Control17=IDC_LISTENADDRESS,edit,1350631552
[CLS:CPropsServer]
Type=0
HeaderFile=PropsServer.h
ImplementationFile=PropsServer.cpp
BaseClass=CPropertyPage
Filter=D
VirtualFilter=idWC
LastObject=CPropsServer
[CLS:CPropsNetwork]
Type=0
HeaderFile=PropsNetwork.h
ImplementationFile=PropsNetwork.cpp
BaseClass=CPropertyPage
Filter=D
VirtualFilter=idWC
-LastObject=IDC_BLOCKSIZE
+LastObject=IDC_LISTENADDRESS
[DLG:IDD_CONFIRM_RRQ]
Type=1
Class=CConfirmRRQDlg
ControlCount=9
Control1=IDOK,button,1342242817
Control2=IDCANCEL,button,1342242816
Control3=IDC_STATIC,static,1342308352
Control4=IDC_HOST,static,1350701313
Control5=IDC_STATIC,static,1342308353
Control6=IDC_FILE,static,1350701313
Control7=IDC_STATIC,static,1342177296
Control8=IDC_STATIC,static,1342177283
Control9=IDC_STATIC,static,1342177283
[DLG:IDD_CONFIRM_WRQ]
diff --git a/pumpkin.rc b/pumpkin.rc index f52c4bd..babd066 100644..100755 --- a/pumpkin.rc +++ b/pumpkin.rc @@ -153,56 +153,58 @@ BEGIN CTEXT "Confirmation &timeout",IDC_STATIC,253,52,40,19,
SS_NOTIFY
CONTROL "Slider1",IDC_PROMPTTIMEOUT,"msctls_trackbar32",
TBS_AUTOTICKS | TBS_VERT | TBS_TOP | WS_TABSTOP,272,72,
21,90
GROUPBOX "Log file (leave empty to disable logging to file)",
IDC_STATIC,7,165,286,29
EDITTEXT IDC_LOGFILE,13,175,256,13,ES_AUTOHSCROLL
PUSHBUTTON "",IDC_LOGFILE_BROWSE,274,175,13,13,BS_ICON
END
IDD_PROPS_NETWORK DIALOG DISCARDABLE 0, 0, 300, 201
STYLE WS_CHILD | WS_DISABLED | WS_CAPTION
CAPTION "Network"
FONT 8, "MS Sans Serif"
BEGIN
- GROUPBOX "UDP Ports",IDC_STATIC,7,7,286,40
+ GROUPBOX "UDP Ports",IDC_STATIC,7,7,286,55
RTEXT "Listen for &incoming requests on port:",IDC_STATIC,13,
18,135,8
- EDITTEXT IDC_LISTENPORT,154,16,40,13,ES_AUTOHSCROLL
+ EDITTEXT IDC_LISTENPORT,154,16,61,13,ES_AUTOHSCROLL
CONTROL "Spin1",IDC_LISTENSPIN,"msctls_updown32",UDS_WRAP |
UDS_SETBUDDYINT | UDS_ALIGNRIGHT | UDS_AUTOBUDDY |
- UDS_ARROWKEYS | UDS_NOTHOUSANDS,183,16,11,13
- RTEXT "Send &outging requests to port:",IDC_STATIC,13,31,135,8
- EDITTEXT IDC_SPEAKPORT,154,29,40,13,ES_AUTOHSCROLL
+ UDS_ARROWKEYS | UDS_NOTHOUSANDS,204,16,11,13
+ RTEXT "Send &outging requests to port:",IDC_STATIC,13,46,135,8
+ EDITTEXT IDC_SPEAKPORT,154,44,61,13,ES_AUTOHSCROLL
CONTROL "Spin1",IDC_SPEAKSPIN,"msctls_updown32",UDS_WRAP |
UDS_SETBUDDYINT | UDS_ALIGNRIGHT | UDS_AUTOBUDDY |
- UDS_ARROWKEYS | UDS_NOTHOUSANDS,183,29,11,13
- LTEXT "Default connection timeout:",IDC_STATIC,7,52,88,8
- EDITTEXT IDC_TIMEOUT,110,50,40,13,ES_AUTOHSCROLL | ES_NUMBER
+ UDS_ARROWKEYS | UDS_NOTHOUSANDS,204,43,11,13
+ LTEXT "Default connection timeout:",IDC_STATIC,7,66,88,8
+ EDITTEXT IDC_TIMEOUT,110,64,40,13,ES_AUTOHSCROLL | ES_NUMBER
CONTROL "Spin3",IDC_TIMESPIN,"msctls_updown32",UDS_WRAP |
UDS_SETBUDDYINT | UDS_ALIGNRIGHT | UDS_AUTOBUDDY |
- UDS_ARROWKEYS | UDS_NOTHOUSANDS,140,50,11,13
- LTEXT "Default block size:",IDC_STATIC,7,66,59,8
- LTEXT "seconds",IDC_STATIC,154,52,28,8
- LTEXT "bytes",IDC_STATIC,154,66,18,8
- EDITTEXT IDC_BLOCKSIZE,110,64,40,13,ES_AUTOHSCROLL | ES_NUMBER
+ UDS_ARROWKEYS | UDS_NOTHOUSANDS,140,64,11,13
+ LTEXT "Default block size:",IDC_STATIC,7,80,59,8
+ LTEXT "seconds",IDC_STATIC,154,66,28,8
+ LTEXT "bytes",IDC_STATIC,154,80,18,8
+ EDITTEXT IDC_BLOCKSIZE,110,78,40,13,ES_AUTOHSCROLL | ES_NUMBER
CONTROL "Spin3",IDC_BSIZESPIN,"msctls_updown32",UDS_WRAP |
UDS_SETBUDDYINT | UDS_ALIGNRIGHT | UDS_AUTOBUDDY |
- UDS_ARROWKEYS | UDS_NOTHOUSANDS,140,64,11,13
+ UDS_ARROWKEYS | UDS_NOTHOUSANDS,140,78,11,13
+ RTEXT "ip address:",IDC_STATIC,13,32,135,8
+ EDITTEXT IDC_LISTENADDRESS,154,28,61,14,ES_AUTOHSCROLL
END
IDD_CONFIRM_RRQ DIALOGEX 0, 0, 181, 79
STYLE DS_MODALFRAME | DS_NOIDLEMSG | DS_SETFOREGROUND | DS_3DLOOK | WS_POPUP |
WS_CAPTION
EXSTYLE WS_EX_TOOLWINDOW | WS_EX_CLIENTEDGE
CAPTION " PumpKIN - Confirm Read Request"
FONT 8, "MS Sans Serif", 0, 0, 0x1
BEGIN
DEFPUSHBUTTON "&Grant Access",IDOK,27,58,54,14
PUSHBUTTON "&Deny Access",IDCANCEL,97,58,54,14
LTEXT "The host",IDC_STATIC,77,7,29,8
CTEXT "255.255.255.255",IDC_HOST,57,15,68,14,SS_NOTIFY |
SS_SUNKEN | WS_BORDER,WS_EX_DLGMODALFRAME |
WS_EX_CLIENTEDGE
CTEXT "is requesting the file",IDC_STATIC,23,29,135,8
diff --git a/resource.h b/resource.h index 7961e5e..2c2fa02 100644..100755 --- a/resource.h +++ b/resource.h @@ -138,36 +138,37 @@ #define IDC_FINISHED_BROWSE 1045
#define IDC_ACL_DOWN 1045
#define IDC_FINISHED_PLAY 1046
#define IDC_ACL_REMOVE 1046
#define IDC_ABORTED 1047
#define IDC_ACL_ADDR 1047
#define IDC_ABORTED_BROWSE 1048
#define IDC_ACL_RULE 1048
#define IDC_ABORTED_PLAY 1049
#define IDC_ACL_NETMASK 1049
#define IDC_ACL_ADD 1050
#define IDC_ACL_XFER 1051
#define IDC_ACL_REPLACE 1052
#define IDC_LISTENING 1052
#define IDC_LOGFILE 1053
#define IDC_LOGFILE_BROWSE 1054
+#define IDC_LISTENADDRESS 1055
#define ID_TRAY_HELP 32771
#define ID_TRAY_ABOUTPUMPKIN 32772
#define ID_TRAY_EXIT 32773
#define ID_TRAY_SENDFILE 32774
#define ID_TRAY_FETCHFILE 32775
#define ID_TRAY_OPTIONS 32776
#define ID_TRAY_SHOWPUMPKINWINDOW 32777
#define ID_TRAY_OPENFILESFOLDER 32778
#define ID_TRAY_LISTEN 32780
// Next default values for new objects
//
#ifdef APSTUDIO_INVOKED
#ifndef APSTUDIO_READONLY_SYMBOLS
-#define _APS_NEXT_RESOURCE_VALUE 155
+#define _APS_NEXT_RESOURCE_VALUE 156
#define _APS_NEXT_COMMAND_VALUE 32781
-#define _APS_NEXT_CONTROL_VALUE 1055
+#define _APS_NEXT_CONTROL_VALUE 1056
#define _APS_NEXT_SYMED_VALUE 102
#endif
#endif
|