don't support configuration without tensioning screw

1 files changed, 19 insertions, 30 deletions

diff --git a/another.scad b/another.scad
index 9ff7f6a..e6d9ca3 100644
--- a/another.scad
+++ b/another.scad
@@ -73,5 +73,4 @@ module the_extruder(
  vitamins = true,
  bridges = true,
- tensioner = true,
  debug = false
 ) {
@@ -349,34 +348,24 @@ module the_extruder(
    }//difference translate
    
-   //translate([-mount_d/2,-longwing,filament_elevation])
-   if(!tensioner) /* XXX: this seems to be bullshit, but it's so old, that it's historical bullshit */
-   translate([mount_d/2,-longwing,filament_elevation])
-   rotate([0,-90,0]) difference() {
-    cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance));
-    translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
-   }
-
    // spring tensioner
    translate([-gearbox_d/2,-longwing,ls_z]) rotate([0,-90,0]) {
-    if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else {
-     mirror([0,0,1]) {
-      translate([0,0,st_thickshell])
-      hull() for(o=[0,spring_d]) translate([0,-o,0])
-      rotate([0,0,30])
-      cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
-      translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance));
-      bigd = spring_d+spring_d_clearance;
-      hf = (bigd-st_screw_d-st_screw_d_tolerance)/2;
-      translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) {
-       cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
-        h=hf+epsilon, $fn=fnd*bigd);
-       translate([0,-(st_thinshell+st_split_w_tolerance)/2,0])
-       cube(size=[body_h-ls_z+1,st_thinshell+st_split_w_tolerance,fsw+1]);
-      }
-      translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
-      cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
-     }
-    }
-   }
+    mirror([0,0,1]) {
+     translate([0,0,st_thickshell])
+     hull() for(o=[0,spring_d]) translate([0,-o,0])
+     rotate([0,0,30])
+     cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
+     translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance));
+     bigd = spring_d+spring_d_clearance;
+     hf = (bigd-st_screw_d-st_screw_d_tolerance)/2;
+     translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) {
+      cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
+       h=hf+epsilon, $fn=fnd*bigd);
+      translate([0,-(st_thinshell+st_split_w_tolerance)/2,0])
+      cube(size=[body_h-ls_z+1,st_thinshell+st_split_w_tolerance,fsw+1]);
+     }//translate
+     translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
+     cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
+    }//mirror
+   }//translate
 
   }//difference
@@ -443,5 +432,5 @@ module the_extruder(
    if(debug) {
     // spring tensioner debug cutout
-    if(tensioner) // TODO: collapse copypasted transformations
+    // TODO: collapse copypasted transformations
     translate([-gearbox_d/2,0,0])
     translate([0,-longwing,ls_z]) rotate([0,-90,0])