Revert "increase default bore_d tolerance"

This reverts commit 183ac2d4948c69d97b5491dcf83fb238d53ac121.

1 files changed, 1 insertions, 1 deletions

diff --git a/another.scad b/another.scad
index f3305a1..a25e047 100644
--- a/another.scad
+++ b/another.scad
@@ -36,49 +36,49 @@ module the_extruder(
  st_nut_d = 9, st_nut_h = 4,
  st_screw_d = 5, st_screw_l = 16,
  st_thickshell = 8*extrusion_width, st_thinshell = 2*extrusion_width,
  st_split_w = 4*extrusion_width,
 
  // screw it
  mount_screw_d = 3.1, mount_screw_l = 20,
  mount_screwhead_d=6, mount_screwhead_h=3,
  idler_screw_d = 3,
  idler_screwhead_d=6, idler_screwhead_h=3,
 
  pf = pushfit_metal,
  pf_shell = max(3*layer_height,3*extrusion_width),
 
  // empty spaces
  idler_travel = 1.75*2,				// how far should idler travel when pressed
  idler_clearance=.5,
  pulley_small_d_clearance=.5,
  lever_v_clearance=.7,				// vertical clearance for the lever
  spring_d_clearance=1,
  protrusion_tolerance_h=.5,			// horizontal tolerance for the motor protrusion
  protrusion_tolerance_v=.5,			// vertical tolerance for the motor protrusion
  mount_screw_d_tolerance=.4,
  idler_v_tolerance=.5,
- knob_bore_d_tolerance=.8,
+ knob_bore_d_tolerance=.6,
  st_nut_h_tolerance=.2,
  st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */
  st_screw_d_tolerance=.5,
  st_split_w_tolerance = .3,
 
  min_z_shell = 4*layer_height,                  // the very minimal shell thickness along z-axis.
  min_xy_shell = 2*extrusion_width,
 
  body_label = "another", body_label_thickness = layer_height,
  knob_label = "another", knob_label_thickness = 2*layer_height, knob_label_size=undef,
 
  what="lever",  // lever|body|knob|springpad|*
  left=false,
  vitamins = true,
  bridges = true,
  debug = false,
 ) {
  fnd = 2*PI; fnr = 2*fnd;
  function lu(m,k) = m[search([k],m)[0]][1];
 
  pulley_d = lu(pulley,"d");
  pulley_h = lu(pulley,"h");
  teeth_elevation = lu(pulley,"fe");
  filament_offset = lu(pulley,"g")+filament_d/2;